summaryrefslogtreecommitdiff
path: root/t/t5505-remote.sh
AgeCommit message (Collapse)AuthorFilesLines
2008-10-13Fix fetch/pull when run without --update-head-okLibravatar Johannes Schindelin1-1/+1
Some confusing tutorials suggested that it would be a good idea to fetch into the current branch with something like this: git fetch origin master:master (or even worse: the same command line with "pull" instead of "fetch"). While it might make sense to store what you want to pull, it typically is plain wrong when the current branch is "master". This should only be allowed when (an incorrect) "git pull origin master:master" tries to work around by giving --update-head-ok to underlying "git fetch", and otherwise we should refuse it, but somewhere along the lines we lost that behavior. The check for the current branch is now _only_ performed in non-bare repositories, which is an improvement from the original behaviour. Some newer tests were depending on the broken behaviour of "git fetch" this patch fixes, and have been adjusted. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-01Bring local clone's origin URL in line with that of a remote cloneLibravatar Johan Herland1-3/+3
On a local clone, "git clone" would use the fully DWIMmed path as the origin URL in the resulting repo. This was slightly inconsistent with the case of a remote clone where the _given_ URL was used as the origin URL (because the DWIMming was done remotely, and was therefore not available to "git clone"). This behaviour caused problems when cloning a local non-bare repo with relative submodule URLs, because these submodule URLs would then be resolved against the DWIMmed URL (e.g. "/repo/.git") instead of the given URL (e.g. "/repo"). This patch teaches "git clone" to use the _given_ URL - instead of the DWIMmed path - as the origin URL. This causes relative submodule URLs to be resolved correctly, as long the _given_ URL indicates the correct directory against which the submodule URLs should be resolved. The patch also updates a testcase that contained the old-style origin URLs. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-7/+7
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-10remote show: list tracked remote branches with -nLibravatar Olivier Marin1-0/+2
Signed-off-by: Olivier Marin <dkr@freesurf.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-10remote prune: print the list of pruned branchesLibravatar Olivier Marin1-0/+18
This command is really too quiet which make it unconfortable to use. Also implement a --dry-run option, in place of the original -n one, to list stale tracking branches that will be pruned, but do not actually prune them. Add a test case for --dry-run. Signed-off-by: Olivier Marin <dkr@freesurf.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-10remote show: fix the -n optionLibravatar Olivier Marin1-0/+17
The perl version accepted a -n flag, to show local informations only without querying remote heads, that seems to have been lost in the C revrite. This restores the older behaviour and add a test case. Signed-off-by: Olivier Marin <dkr@freesurf.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-31Make "git-remote prune" delete refs according to fetch specsLibravatar Shawn O. Pearce1-0/+18
A remote may be configured to fetch into tracking branches that do not match the remote name. For example a user may have created extra remotes that will fetch to the same tracking branch namespace, but from different URLs: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/*:refs/remotes/origin/* [remote "alt"] url = git://repo.or.cz/alt-git.git fetch = refs/heads/*:refs/remotes/origin/* When running `git remote prune alt` we expect stale branches to be removed from "refs/remotes/origin/*" and not from the unused namespace of "refs/remotes/alt/*". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-24tests: do not use implicit "git diff --no-index"Libravatar Junio C Hamano1-5/+5
As a general principle, we should not use "git diff" to validate the results of what git command that is being tested has done. We would not know if we are testing the command in question, or locating a bug in the cute hack of "git diff --no-index". Rather use test_cmp for that purpose. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-24remote: create fetch config lines with '+'Libravatar Jeff King1-0/+10
Since git-remote always uses remote tracking branches, it should be safe to always force updates of those branches. I.e., we should generate fetch = +refs/heads/*:refs/remotes/$remote/* instead of fetch = refs/heads/*:refs/remotes/$remote/* This was the behavior of the perl version, which seems to have been lost in the C rewrite. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-18git-remote: reject adding remotes with invalid namesLibravatar Jonas Fonseca1-0/+6
This can happen if the arguments to git-remote add is switched by the user, and git would only show an error if fetching was also requested. Fix it by using the refspec parsing engine to check if the requested name can be parsed as a remote before add it. Also cleanup so that the "remote.<name>.url" config name buffer is only initialized once. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-23builtin-remote: Fix missing newline at end of listing of pushed branchesLibravatar Johannes Sixt1-0/+6
Without this the output of 'git remote show' does not end with a new-line: bash> git remote show repo * remote repo URL: repo.or.cz:/srv/git/kdbg.git Tracked remote branches maint master mob Local branch pushed with 'git push' +master:masterbash> Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-19remote show: do not show symbolic refsLibravatar Johannes Schindelin1-0/+10
For symbolic refs, a sane notion of being "stale" is that the ref they point to no longer exists. Since this is checked already, "remote show" does not need to show them at all. Incidentally, this fixes the issue that "HEAD" was shown as a stale ref by "remote show" in a freshly cloned repository. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13add test_cmp function for test scriptsLibravatar Jeff King1-3/+3
Many scripts compare actual and expected output using "diff -u". This is nicer than "cmp" because the output shows how the two differ. However, not all versions of diff understand -u, leading to unnecessary test failure. This adds a test_cmp function to the test scripts and switches all "diff -u" invocations to use it. The function uses the contents of "$GIT_TEST_CMP" to compare its arguments; the default is "diff -u". On systems with a less-capable diff, you can do: GIT_TEST_CMP=cmp make test Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-08builtin remote rm: remove symbolic refs, tooLibravatar Johannes Schindelin1-0/+1
"git remote add" can add a symbolic ref "HEAD", and "rm" should delete it, too. Noticed by Teemu Likonen. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-05remote: fix "update [group...]"Libravatar Johannes Schindelin1-0/+92
The rewrite in C inadvertently broke updating with remote groups: when you pass parameters to "git remote update", it used to look up "remotes.<group>" for every parameter, and interpret the value as a list of remotes to update. Also, no parameter, or a single parameter "default" should update all remotes that have not been marked with "skipDefaultUpdate". Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-01builtin-remote: prune remotes correctly that were added with --mirrorLibravatar Johannes Schindelin1-0/+16
This adds special handling for mirror remotes. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-01Make git-remote a builtinLibravatar Johannes Schindelin1-2/+2
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-01Test "git remote show" and "git remote prune"Libravatar Johannes Schindelin1-0/+34
While at it, also fix a few instances where a cd was done outside of a subshell. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-27Don't use GIT_CONFIG in t5505-remoteLibravatar Daniel Barkalow1-3/+0
For some reason, t5505-remote was setting GIT_CONFIG to .git/config and exporting it. This should have been no-op, as test framework did the same for a long time anyway. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-23git-remote rm: add tests and minor fix-upsLibravatar Junio C Hamano1-0/+100
This fixes "git remote rm" which always exited with a failure, corrects indentation, and adds tests. Signed-off-by: Junio C Hamano <gitster@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 16:31:20 +0000