| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previously, branches were listed on a single line in each section. But
if there are many branches, then horizontal, line-wrapped lists are very
inconvenient to scan for a human. This makes the lists vertical, i.e one
branch per line is printed.
Since "git remote" is porcelain, we can easily make this
backwards-incompatible change.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some confusing tutorials suggested that it would be a good idea to fetch
into the current branch with something like this:
git fetch origin master:master
(or even worse: the same command line with "pull" instead of "fetch").
While it might make sense to store what you want to pull, it typically is
plain wrong when the current branch is "master". This should only be
allowed when (an incorrect) "git pull origin master:master" tries to work
around by giving --update-head-ok to underlying "git fetch", and otherwise
we should refuse it, but somewhere along the lines we lost that behavior.
The check for the current branch is now _only_ performed in non-bare
repositories, which is an improvement from the original behaviour.
Some newer tests were depending on the broken behaviour of "git fetch"
this patch fixes, and have been adjusted.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On a local clone, "git clone" would use the fully DWIMmed path as the origin
URL in the resulting repo. This was slightly inconsistent with the case of a
remote clone where the _given_ URL was used as the origin URL (because the
DWIMming was done remotely, and was therefore not available to "git clone").
This behaviour caused problems when cloning a local non-bare repo with
relative submodule URLs, because these submodule URLs would then be resolved
against the DWIMmed URL (e.g. "/repo/.git") instead of the given URL (e.g.
"/repo").
This patch teaches "git clone" to use the _given_ URL - instead of the
DWIMmed path - as the origin URL. This causes relative submodule URLs to be
resolved correctly, as long the _given_ URL indicates the correct directory
against which the submodule URLs should be resolved.
The patch also updates a testcase that contained the old-style origin URLs.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This command is really too quiet which make it unconfortable to use.
Also implement a --dry-run option, in place of the original -n one, to
list stale tracking branches that will be pruned, but do not actually
prune them.
Add a test case for --dry-run.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The perl version accepted a -n flag, to show local informations only
without querying remote heads, that seems to have been lost in the C
revrite.
This restores the older behaviour and add a test case.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A remote may be configured to fetch into tracking branches that
do not match the remote name. For example a user may have created
extra remotes that will fetch to the same tracking branch namespace,
but from different URLs:
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = refs/heads/*:refs/remotes/origin/*
[remote "alt"]
url = git://repo.or.cz/alt-git.git
fetch = refs/heads/*:refs/remotes/origin/*
When running `git remote prune alt` we expect stale branches to
be removed from "refs/remotes/origin/*" and not from the unused
namespace of "refs/remotes/alt/*".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git-remote always uses remote tracking branches, it
should be safe to always force updates of those branches.
I.e., we should generate
fetch = +refs/heads/*:refs/remotes/$remote/*
instead of
fetch = refs/heads/*:refs/remotes/$remote/*
This was the behavior of the perl version, which seems to
have been lost in the C rewrite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This can happen if the arguments to git-remote add is switched by the
user, and git would only show an error if fetching was also requested.
Fix it by using the refspec parsing engine to check if the requested
name can be parsed as a remote before add it.
Also cleanup so that the "remote.<name>.url" config name buffer is only
initialized once.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this the output of 'git remote show' does not end with a new-line:
bash> git remote show repo
* remote repo
URL: repo.or.cz:/srv/git/kdbg.git
Tracked remote branches
maint master mob
Local branch pushed with 'git push'
+master:masterbash>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For symbolic refs, a sane notion of being "stale" is that the ref
they point to no longer exists. Since this is checked already,
"remote show" does not need to show them at all.
Incidentally, this fixes the issue that "HEAD" was shown as a
stale ref by "remote show" in a freshly cloned repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many scripts compare actual and expected output using
"diff -u". This is nicer than "cmp" because the output shows
how the two differ. However, not all versions of diff
understand -u, leading to unnecessary test failure.
This adds a test_cmp function to the test scripts and
switches all "diff -u" invocations to use it. The function
uses the contents of "$GIT_TEST_CMP" to compare its
arguments; the default is "diff -u".
On systems with a less-capable diff, you can do:
GIT_TEST_CMP=cmp make test
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git remote add" can add a symbolic ref "HEAD", and "rm" should delete
it, too.
Noticed by Teemu Likonen.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rewrite in C inadvertently broke updating with remote groups: when you
pass parameters to "git remote update", it used to look up "remotes.<group>"
for every parameter, and interpret the value as a list of remotes to update.
Also, no parameter, or a single parameter "default" should update all
remotes that have not been marked with "skipDefaultUpdate".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds special handling for mirror remotes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at it, also fix a few instances where a cd was done outside of a
subshell.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For some reason, t5505-remote was setting GIT_CONFIG to .git/config
and exporting it. This should have been no-op, as test framework did
the same for a long time anyway.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes "git remote rm" which always exited with a failure,
corrects indentation, and adds tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Sixt
Johannes Schindelin
Johan Herland
Stephan Beyer
Olivier Marin
Shawn O. Pearce
Junio C Hamano
Jeff King
Jonas Fonseca
Johannes Sixt
Daniel Barkalow