| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
|
|
In 66713e84e71 (tests: prepare aligned mentions of the default branch
name, 2020-10-23), we started that transition, trying to prepare for a
time when `git init` would use that name for the initial branch.
Even if that time has not arrived, we can complete the transition by
making the test script independent of the default branch name. This also
allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq from four test
cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We introduced the `PREPARE_FOR_MAIN_BRANCH` prereq for the sole purpose
of allowing us to perform the non-trivial adjustments regarding the
`master` -> `main` rename before the automatable ones.
Now that the transition is almost complete, we can stop using it in most
instances. The only two exceptions are t5526 and t9902: at the time of
writing, there are other patches in flight that touch these test
scripts, therefore their transition to `main` is postponed to a later
date.
This patch is the result of this command:
sed -i 's/PREPARE_FOR_MAIN_BRANCH[ ,]//' t/t[0-9]*.sh &&
git checkout HEAD -- t/t5526\* t/t9902\*
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t550*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
|
|
Adjust tests so that they won't scream when the default initial
branch name is changed to 'main'.
* js/default-branch-name-part-4-minus-1:
t1400: prepare for `main` being default branch name
tests: prepare aligned mentions of the default branch name
t9902: prepare a test for the upcoming default branch name
t3200: prepare for `main` being shorter than `master`
t5703: adjust a test case for the upcoming default branch name
t6200: adjust suppression pattern to also match "main"
tests: start moving to a different default main branch name
t9801: use `--` in preparation for default branch rename
fmt-merge-msg: also suppress "into main" by default
|
|
Change the exit code for the likes of "git remote add/rename" to exit
with 2 if the remote in question doesn't exist, and 3 if it
does. Before we'd just die() and exit with the general 128 exit code.
This changes the output message from e.g.:
fatal: remote origin already exists.
To:
error: remote origin already exists.
Which I believe is a feature, since we generally use "fatal" for the
generic errors, and "error" for the more specific ones with a custom
exit code, but this part of the change may break code that already
relies on stderr parsing (not that we ever supported that...).
The motivation for this is a discussion around some code in GitLab's
gitaly which wanted to check this, and had to parse stderr to do so:
https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2695
It's worth noting as an aside that a method of checking this that
doesn't rely on that is to check with "git config" whether the value
in question does or doesn't exist. That introduces a TOCTOU race
condition, but on the other hand this code (e.g. "git remote add")
already has a TOCTOU race.
We go through the config.lock for the actual setting of the config,
but the pseudocode logic is:
read_config();
check_config_and_arg_sanity();
save_config();
So e.g. if a sleep() is added right after the remote_is_configured()
check in add() we'll clobber remote.NAME.url, and add another (usually
duplicate) remote.NAME.fetch entry (and other values, depending on
invocation).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some tests, the default branch name is part of aligned output. As we
want to change the default branch name to `main`, which is two
characters shorter than the old default branch name, we will have to
adjust those tests.
Since we use the original default branch name until the entire test
suite has been adjusted accordingly, the touched test cases need to be
guarded by a prereq (that is so far disabled so that they are skipped
for now).
The test cases that depend on those test cases that are newly guarded by
that prereq naturally have to be guarded, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for a future patch that moves `builtin/remote.c`'s
remote-name validation, ensure `git remote add` and `git remote rename`
report errors when the new name isn't valid.
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As our test suite partially reflects how we work in the Git project, it
is natural that the branch name `pu` was used in a couple places.
Since that branch was renamed to `seen`, let's use the new name
consistently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When renaming a remote with
git remote rename X Y
git remote remove X
Git already renames or removes any branch.<name>.remote and
branch.<name>.pushRemote configurations if their value is X.
However remote.pushDefault needs a more gentle approach, as this may be
set in a non-repo configuration file. In such a case only a warning is
printed, such as:
warning: The global configuration remote.pushDefault in:
$HOME/.gitconfig:35
now names the non-existent remote origin
It is changed to remote.pushDefault = Y or removed when set in a repo
configuration though.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When renaming or removing a remote with
git remote rename X Y
git remote remove X
Git already renames/removes any config values from
branch.<name>.remote = X
to
branch.<name>.remote = Y
As branch.<name>.pushRemote also names a remote, it now also renames
or removes these config values from
branch.<name>.pushRemote = X
to
branch.<name>.pushRemote = Y
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test asserting that "git push origin <src>:<dst>" where <src> is
a branch, tag, tree or blob in refs/remotes/* doesn't DWYM when <dst>
is unqualified. This has never been the case, but there haven't been
any tests for this behavior.
See f88395ac23 ("Renaming push.", 2005-08-03), bb9fca80ce ("git-push:
Update description of refspecs and add examples", 2007-06-09) and
f8aae12034 ("push: allow unqualified dest refspecs to DWIM",
2008-04-23) which are most relevant commits that have changed or
documented the behavior of the DWYM feature in the past.
These tests were originally meant to lead up to a patch that made
refs/remotes/* on the LHS imply refs/heads/* on the RHS, see [1]. That
patch proved controversial and may not ever land in git.git, but we
should have the tests that remind us what the current behavior is in
case it's ever changed.
1. https://public-inbox.org/git/20181026230741.23321-8-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an advice to the recently improved error message added in
f8aae12034 ("push: allow unqualified dest refspecs to DWIM",
2008-04-23).
Now with advice.pushUnqualifiedRefName=true (on by default) we show a
hint about how to proceed:
$ ./git-push avar v2.19.0^{commit}:newbranch -n
error: The destination you provided is not a full refname (i.e.,
starting with "refs/"). We tried to guess what you meant by:
- Looking for a ref that matches 'newbranch' on the remote side.
- Checking if the <src> being pushed ('v2.19.0^{commit}')
is a ref in "refs/{heads,tags}/". If so we add a corresponding
refs/{heads,tags}/ prefix on the remote side.
Neither worked, so we gave up. You must fully qualify the ref.
hint: The <src> part of the refspec is a commit object.
hint: Did you mean to create a new branch by pushing to
hint: 'v2.19.0^{commit}:refs/heads/newbranch'?
error: failed to push some refs to 'git@github.com:avar/git.git'
When trying to push a tag, tree or a blob we suggest that perhaps the
user meant to push them to refs/tags/ instead.
The if/else duplication for all of OBJ_{COMMIT,TAG,TREE,BLOB} is
unfortunate, but is required to correctly mark the messages for
translation. See the discussion in
<87r2gxebsi.fsf@evledraar.gmail.com> about that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When adding new remote name with empty string, git will print the
following error message,
fatal: '' is not a valid remote name\n
But when removing remote name with empty string as input, git shows the
empty string without quote,
fatal: No such remote: \n
To make these error messages consistent, quote the name of the remote
that we tried and failed to find.
Signed-off-by: Shulhan <m.shulhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test updates.
* ab/test-must-be-empty-for-master:
tests: make use of the test_must_be_empty function
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
Change various tests that use an idiom of the form:
>expect &&
test_cmp expect actual
To instead use:
test_must_be_empty actual
The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:
git grep '^\s+>.*expect.* &&$' t
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test uses a subshell within a subshell but is formatted in such a
way as to suggests that the inner subshell is a sibling rather than a
child, which makes it difficult to digest the test's structure and
intent.
Worse, the inner subshell performs cleanup of actions from earlier in
the test, however, a failure between the initial actions and the cleanup
will prevent the cleanup from taking place.
Fix these problems by modernizing and simplifying the test and by using
test_when_finished() for the cleanup action.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
|
|
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
* mh/ref-remove-empty-directory: (23 commits)
files_transaction_commit(): clean up empty directories
try_remove_empty_parents(): teach to remove parents of reflogs, too
try_remove_empty_parents(): don't trash argument contents
try_remove_empty_parents(): rename parameter "name" -> "refname"
delete_ref_loose(): inline function
delete_ref_loose(): derive loose reference path from lock
log_ref_write_1(): inline function
log_ref_setup(): manage the name of the reflog file internally
log_ref_write_1(): don't depend on logfile argument
log_ref_setup(): pass the open file descriptor back to the caller
log_ref_setup(): improve robustness against races
log_ref_setup(): separate code for create vs non-create
log_ref_write(): inline function
rename_tmp_log(): improve error reporting
rename_tmp_log(): use raceproof_create_file()
lock_ref_sha1_basic(): use raceproof_create_file()
lock_ref_sha1_basic(): inline constant
raceproof_create_file(): new function
safe_create_leading_directories(): set errno on SCLD_EXISTS
safe_create_leading_directories_const(): preserve errno
...
|
|
It is not all too unusual for a branch to use "branch.<name>.remote"
without "branch.<name>.merge". You may be using the 'push.default'
configuration set to 'current', for example, and do
$ git checkout -b side colleague/side
$ git config branch.side.remote colleague
However, "git remote rm" to remove the remote used in such a manner
fails with
"fatal: could not unset 'branch.<name>.merge'"
because it assumes that a branch that has .remote defined must also
have .merge defined. Detect the "cannot unset because it is not set
to begin with" case and ignore it.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the really nice features of the ~/.gitconfig file is that users
can override defaults by their own preferred settings for all of their
repositories.
One such default that some users like to override is whether the
"origin" remote gets auto-pruned or not. The user would simply call
git config --global remote.origin.prune true
and from now on all "origin" remotes would be pruned automatically when
fetching into the local repository.
There is just one catch: now Git thinks that the "origin" remote is
configured, even if the repository config has no [remote "origin"]
section at all, as it does not realize that the "prune" setting was
configured globally and that there really is no "origin" remote
configured in this repository.
That is a problem e.g. when renaming a remote to a new name, when Git
may be fooled into thinking that there is already a remote of that new
name.
Let's fix this by paying more attention to *where* the remote settings
came from: if they are configured in the local repository config, we
must not overwrite them. If they were configured elsewhere, we cannot
overwrite them to begin with, as we only write the repository config.
There is only one caller of remote_is_configured() (in `git fetch`) that
may want to take remotes into account even if they were configured
outside the repository config; all other callers essentially try to
prevent the Git command from overwriting settings in the repository
config.
To accommodate that fact, the remote_is_configured() function now
requires a parameter that states whether the caller is interested in all
remotes, or only in those that were configured in the repository config.
Many thanks to Jeff King whose tireless review helped with settling for
nothing less than the current strategy.
This fixes https://github.com/git-for-windows/git/issues/888
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users like to set `remote.origin.prune = true` in their ~/.gitconfig
so that all of their repositories use that default.
However, our code is ill-prepared for this, mistaking that single entry to
mean that there is already a remote of the name "origin", even if there is
not.
This patch adds a test case demonstrating this issue.
Reported by Andrew Arnott.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of looking on the filesystem inside ".git/refs/remotes/origin",
use "git for-each-ref" to check for leftover references under the
remote's old name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
|
|
The internal API to interact with "remote.*" configuration
variables has been streamlined.
* tg/git-remote:
remote: use remote_is_configured() for add and rename
remote: actually check if remote exits
remote: simplify remote_is_configured()
remote: use parse_config_key
|
|
* js/git-remote-add-url-insteadof-test:
t5505: 'remote add x y' should work when url.y.insteadOf = x
|
|
When invoking `git-remote --set-url` we do not check the return
value when writing the actual new URL to the configuration file,
pretending to the user that the configuration has been set while
it was in fact not persisted.
Fix this problem by dying early when setting the config fails.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the test missing from fb86e32 (git remote: allow adding
remotes agreeing with url.<...>.insteadOf, 2014-12-23): we should
allow adding a remote with the URL when it agrees with the
url.<...>.insteadOf setting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both remote add and remote rename use a slightly different hand-rolled
check if the remote exits. The hand-rolled check may have some subtle
cases in which it might fail to detect when a remote already exists.
One such case was fixed in fb86e32 ("git remote: allow adding remotes
agreeing with url.<...>.insteadOf"). Another case is when a remote is
configured as follows:
[remote "foo"]
vcs = bar
If we try to run `git remote add foo bar` with the above remote
configuration, git segfaults. This change fixes it.
In addition, git remote rename $existing foo with the configuration for
foo as above silently succeeds, even though foo already exists,
modifying its configuration. With this patch it fails with "remote foo
already exists".
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When converting the git remote command to a builtin in 211c89 ("Make
git-remote a builtin"), a few calls to check if a remote exists were
converted from:
if (!exists $remote->{$name}) {
[...]
to:
remote = remote_get(argv[1]);
if (!remote)
[...]
The new check is not quite correct, because remote_get() never returns
NULL if a name is given. This leaves us with the somewhat cryptic error
message "error: Could not remove config section 'remote.test'", if we
are trying to remove a remote that does not exist, or a similar error if
we try to rename a remote.
Use the remote_is_configured() function to check whether the remote
actually exists, and die with a more sensible error message ("No such
remote: $remotename") instead if it doesn't.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expanding `insteadOf` is a part of ls-remote --url and there is no way
to expand `pushInsteadOf` as well. Add a get-url subcommand to be able
to query both as well as a way to get all configured urls.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are all cases where we do a setup step of the form:
for i in $foo; do
set_up $i || break
done &&
more_setup
would not notice a failure in set_up (because break always
returns a 0 exit code). These are just setup steps that we
do not expect to fail, but it does not hurt to be defensive.
Most can be fixed by converting the "break" to a "return 1"
(since we eval our tests inside a function for just this
purpose). A few of the loops are inside subshells, so we can
use just "exit 1" to break out of the subshell. And a few
can actually be made shorter by just unrolling the loop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By doing this, clients of upload-pack can now reliably tell what ref
a symbolic ref points at; the updated test in t5505 used to expect
failure due to the ambiguity and made sure we give diagnostics, but
we no longer need to be so pessimistic. Make sure we correctly learn
which branch HEAD points at from the other side instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When two or more branches point at the same commit and HEAD is
pointing at one of them, without the symref extension, there is no
way to remotely tell which one of these branches HEAD points at.
The test in question attempts to make sure that this situation is
diagnosed and results in a failure.
However, even if there _were_ a way to reliably tell which branch
the HEAD points at, "set-head --auto" would fail if there is no
remote tracking branch. Make sure that this test does not fail
for that "wrong" reason.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ms/remote-tracking-branches-in-doc:
Change "remote tracking" to "remote-tracking"
|
|
Fix a typo ("remote remote-tracking") going back to the big cleanup
in 2010 (8b3f3f84 etc). Also, remove some more occurrences of
"tracking" and "remote tracking" in favor of "remote-tracking".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the test "migrate a remote from named file in $GIT_DIR/remotes"
to test that multiple "Push:" and "Pull:" lines in the remotes-file
works as expected.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add one more test similar to "migrate a remote from named file in
$GIT_DIR/branches" to check that a url with a # can be used to specify
the branch name (as opposed to the constant "master").
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace instances of ! test -f with test_path_is_missing.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test "migrate a remote from named file in $GIT_DIR/branches" reads
the branches-file, but only checks that the url and fetch-refspec are
set correctly. Check that the push-refspec is also set correctly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Modernize the style of all tests throughout the file:
- Remove spurious blank lines.
- Indent the test body.
- Make sure that all lines end with &&, to make it easier to spot
breaks in the chain.
- When executing something in a subshell, put the parenthesis on
separate lines and indent the body. Also make sure that the
first statement in the subshell is a 'cd'.
- When redirecting input or output, do not use SP between
redirection operator and the target filename.
- Use the <<-\EOF and <<-EOF forms of heredoc, not <<EOF, when the
command is indented and the heredoc text itself does not have to
have a leading tab.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/remote-tighten-commandline-parsing:
remote: 'show' and 'prune' can take more than one remote
remote: check for superfluous arguments in 'git remote add'
remote: add a test for extra arguments, according to docs
|
Junio C Hamano
Johannes Schindelin
Ævar Arnfjörð Bjarmason
Sean Barag
Bert Wesarg
Shulhan
Nguyễn Thái Ngọc Duy
Eric Sunshine
Ross Lagerwall
Michael Haggerty
Vasco Almeida
Patrick Steinhardt
Thomas Gummerer
Elia Pinto
Ben Boeckel
Jeff King
Michael Schubert
Ramkumar Ramachandra