| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch-pack --all" used to unnecessarily fail upon seeing an
annotated tag that points at an object other than a commit.
* jk/fetch-all-peeled-fix:
fetch-pack: test explicitly that --all can fetch tag references pointing to non-commits
fetch-pack: don't try to fetch peel values with --all
|
|
"git fetch --shallow-since=<cutoff>" that specifies the cut-off
point that is newer than the existing history used to end up
grabbing the entire history. Such a request now errors out.
* nd/reject-empty-shallow-request:
upload-pack: reject shallow requests that would return nothing
|
|
non-commits
Fetch-pack --all became broken with respect to unusual tags in
5f0fc64513 (fetch-pack: eliminate spurious error messages, 2012-09-09),
and was fixed only recently in e9502c0a7f (fetch-pack: don't try to fetch
peel values with --all, 2018-06-11). However the test added in
e9502c0a7f does not explicitly cover all funky cases.
In order to be sure fetching funky tags will never break, let's
explicitly test all relevant cases with 4 tag objects pointing to 1) a
blob, 2) a tree, 3) a commit, and 4) another tag objects. The referenced
tag objects themselves are referenced from under regular refs/tags/*
namespace. Before e9502c0a7f `fetch-pack --all` was failing e.g. this way:
.../git/t/trash directory.t5500-fetch-pack/fetchall$ git ls-remote ..
44085874... HEAD
...
bc4e9e1f... refs/tags/tag-to-blob
038f48ad... refs/tags/tag-to-blob^{} # peeled
520db1f5... refs/tags/tag-to-tree
7395c100... refs/tags/tag-to-tree^{} # peeled
.../git/t/trash directory.t5500-fetch-pack/fetchall$ git fetch-pack --all ..
fatal: A git upload-pack: not our ref 038f48ad...
fatal: The remote end hung up unexpectedly
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "fetch-pack --all" sees a tag-to-blob on the remote, it
tries to fetch both the tag itself ("refs/tags/foo") and the
peeled value that the remote advertises ("refs/tags/foo^{}").
Asking for the object pointed to by the latter can cause
upload-pack to complain with "not our ref", since it does
not mark the peeled objects with the OUR_REF (unless they
were at the tip of some other ref).
Arguably upload-pack _should_ be marking those peeled
objects. But it never has in the past, since clients would
generally just ask for the tag and expect to get the peeled
value along with it. And that's how "git fetch" works, as
well as older versions of "fetch-pack --all".
The problem was introduced by 5f0fc64513 (fetch-pack:
eliminate spurious error messages, 2012-09-09). Before then,
the matching logic was something like:
if (refname is ill-formed)
do nothing
else if (doing --all)
always consider it matched
else
look through list of sought refs for a match
That commit wanted to flip the order of the second two arms
of that conditional. But we ended up with:
if (refname is ill-formed)
do nothing
else
look through list of sought refs for a match
if (--all and no match so far)
always consider it matched
That means tha an ill-formed ref will trigger the --all
conditional block, even though we should just be ignoring
it. We can fix that by having a single "else" with all of
the well-formed logic, that checks the sought refs and
"--all" in the correct order.
Reported-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Shallow clones with --shallow-since or --shalow-exclude work by
running rev-list to get all reachable commits, then draw a boundary
between reachable and unreachable and send "shallow" requests based on
that.
The code does miss one corner case: if rev-list returns nothing, we'll
have no border and we'll send no shallow requests back to the client
(i.e. no history cuts). This essentially means a full clone (or a full
branch if the client requests just one branch). One example is the
oldest commit is older than what is specified by --shallow-since.
To avoid this, if rev-list returns nothing, we abort the clone/fetch.
The user could adjust their request (e.g. --shallow-since further back
in the past) and retry.
Another possible option for this case is to fall back to a default
depth (like depth 1). But I don't like too much magic that way because
we may return something unexpected to the user. If they request
"history since 2008" and we return a single depth at 2000, that might
break stuff for them. It is better to tell them that something is
wrong and let them take the best course of action.
Note that we need to die() in get_shallow_commits_by_rev_list()
instead of just checking for empty result from its caller
deepen_by_rev_list() and handling the error there. The reason is,
empty result could be a valid case: if you have commits in year 2013
and you request --shallow-since=year.2000 then you should get a full
clone (i.e. empty result).
Reported-by: Andreas Krey <a.krey@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many tests are very focused on the file system representation of the
loose and packed refs code. As there are plans to implement other
ref storage systems, let's migrate these tests to a form that test
the intent of the refs storage system instead of it internals.
This will make clear to readers that these tests do not depend on
which ref backend is used.
The internals of the loose refs backend are still tested in
t1400-update-ref.sh, whereas the tests changed in this patch focus
on testing other aspects.
This patch just takes care of many low hanging fruits. It does not
try to completely solves the issue.
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Three "missing reference" tests in 't5500-fetch-pack.sh' fail when the
test script is run with '-x' tracing (and using a shell other than a
Bash version supporting BASH_XTRACEFD). The reason for those failures
is that the tests check a subshell's stderr, which includes the trace
of executing commands in that subshell as well, throwing off the
comparison with the expected output.
Save the stderr of 'git fetch-pack' only instead of the whole
subshell, so it remains free from tracing output.
After this change t5500 passes with '-x', even when running with
/bin/sh.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach fetch to support filters. This is only allowed for the remote
configured in extensions.partialcloneremote.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Created tests to verify fetch-pack and upload-pack support
for excluding large blobs using --filter=blobs:limit=<n>
parameter.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fetch-pack, when fetching a literal SHA-1 from a server that is not
configured with uploadpack.allowtipsha1inwant (or similar), always
returns an error message of the form "Server does not allow request for
unadvertised object %s". However, it is sometimes the case that such
object is advertised. This situation would occur, for example, if a user
or a script was provided a SHA-1 instead of a branch or tag name for
fetching, and wanted to invoke "git fetch" or "git fetch-pack" using
that SHA-1.
Teach fetch-pack to also check the SHA-1s of the refs in the received
ref advertisement if a literal SHA-1 was given by the user.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare to reuse this code in transport.c for "git fetch".
While we're here, internationalize the existing error message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
|
|
In git-fetch, --depth argument is always relative with the latest
remote refs. This makes it a bit difficult to cover this use case,
where the user wants to make the shallow history, say 3 levels
deeper. It would work if remote refs have not moved yet, but nobody
can guarantee that, especially when that use case is performed a
couple months after the last clone or "git fetch --depth". Also,
modifying shallow boundary using --depth does not work well with
clones created by --since or --not.
This patch fixes that. A new argument --deepen=<N> will add <N> more (*)
parent commits to the current history regardless of where remote refs
are.
Have/Want negotiation is still respected. So if remote refs move, the
server will send two chunks: one between "have" and "want" and another
to extend shallow history. In theory, the client could send no "want"s
in order to get the second chunk only. But the protocol does not allow
that. Either you send no want lines, which means ls-remote; or you
have to send at least one want line that carries deep-relative to the
server..
The main work was done by Dongcan Jiang. I fixed it up here and there.
And of course all the bugs belong to me.
(*) We could even support --deepen=<N> where <N> is negative. In that
case we can cut some history from the shallow clone. This operation
(and --depth=<shorter depth>) does not require interaction with remote
side (and more complicated to implement as a result).
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
test fixes.
* jk/shell-portability:
t5500 & t7403: lose bash-ism "local"
test-lib: add in-shell "env" replacement
|
|
In t5500::check_prot_host_port_path(), diagport is not a variable
used elsewhere and the function is not recursively called so this
can simply lose the "local", which may not be supported by shell
(besides, the function liberally clobbers other variables without
making them "local").
t7403::reset_submodule_urls() overrides the "root" variable used
in the test framework for no good reason; its use is not about
temporarily relocating where the test repositories are created.
This assignment can be made not to clobber the variable by moving
them into the subshells it already uses. Its value is always
$TRASH_DIRECTORY, so we could use it instead there, and this
function that is called only once and its two subshells may not be
necessary (instead, the caller can use "git -C $there config" and
set a value that is derived from $TRASH_DIRECTORY), but this is a
minimum fix that is needed to lose "local".
Helped-by: John Keeping <john@keeping.me.uk>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge" used to allow merging two branches that have no common
base by default, which led to a brand new history of an existing
project created and then get pulled by an unsuspecting maintainer,
which allowed an unnecessary parallel history merged into the
existing project. The command has been taught not to allow this by
default, with an escape hatch "--allow-unrelated-histories" option
to be used in a rare event that merges histories of two projects
that started their lives independently.
* jc/merge-refuse-new-root:
merge: refuse to create too cool a merge by default
|
|
While it makes sense to allow merging unrelated histories of two
projects that started independently into one, in the way "gitk" was
merged to "git" itself aka "the coolest merge ever", such a merge is
still an unusual event. Worse, if somebody creates an independent
history by starting from a tarball of an established project and
sends a pull request to the original project, "git merge" however
happily creates such a merge without any sign of something unusual
is happening.
Teach "git merge" to refuse to create such a merge by default,
unless the user passes a new "--allow-unrelated-histories" option to
tell it that the user is aware that two unrelated projects are
merged.
Because such a "two project merge" is a rare event, a configuration
option to always allow such a merge is not added.
We could add the same option to "git pull" and have it passed
through to underlying "git merge". I do not have a fundamental
opposition against such a feature, but this commit does not do so
and instead leaves it as low-hanging fruit for others, because such
a "two project merge" would be done after fetching the other project
into some location in the working tree of an existing project and
making sure how well they fit together, it is sufficient to allow a
local merge without such an option pass-through from "git pull" to
"git merge". Many tests that are updated by this patch does the
pass-through manually by turning:
git pull something
into its equivalent:
git fetch something &&
git merge --allow-unrelated-histories FETCH_HEAD
If somebody is inclined to add such an option, updated tests in this
change need to be adjusted back to:
git pull --allow-unrelated-histories something
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 58f2ed0 (remote-curl: pass ref SHA-1 to fetch-pack as well,
2013-12-05) added support for specifying a SHA-1 as well as a ref name.
Add support for specifying just a SHA-1 and set the ref name to the same
value in this case.
Signed-off-by: Gabriel Souza Franco <gabrielfrancosouza@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier update to the parser that disects an address broke an
address, followed by a colon, followed by an empty string (instead
of the port number).
* tb/connect-ipv6-parse-fix:
connect.c: ignore extra colon after hostname
|
|
Ignore an extra ':' at the end of the hostname in URL's like
"ssh://example.com:/path/to/repo"
The colon is meant to separate a port number from the hostname.
If the port is empty, the colon should be ignored, see RFC 3986.
It had been working for URLs with ssh:// scheme, but was unintentionally
broken in 86ceb3, "allow ssh://user@[2001:db8::1]/repo.git"
Reported-by: Reid Woodbury Jr. <reidw@rawsound.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The URL for ssh may have include a username before the hostname,
like ssh://user@host/repo.
When literal IPV6 addresses are used together with a username,
the substring "user@[::1]" must be converted into "user@::1".
Make that conversion visible for the user, and write userandhost
in the diagnostics
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the function is_local() in transport.c public, rename it into
url_is_local_not_ssh() and use it in both transport.c and connect.c
Use a protocol "local" for URLs for the local file system.
One note about using file:// under Windows:
The (absolute) path on Unix like system typically starts with "/".
When the host is empty, it can be omitted, so that a shell scriptlet
url=file://$pwd
will give a URL like "file:///home/user/repo".
Windows does not have the same concept of a root directory located in "/".
When parsing the URL allow "file://C:/user/repo"
(even if RFC1738 indicates that "file:///C:/user/repo" should be used).
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use get_host_and_port() even for ssh.
Remove the variable port git_connect(), and simplify parse_connect_url()
Use only one return point in git_connect(), doing the free() and return conn.
t5601 had 2 corner test cases which now pass.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation (in urls.txt) says that
"ssh://host:/~repo",
"host:/~repo" or
"host:~repo"
specify the repository "repo" in the home directory at "host".
This has not been working for "host:/~repo".
Before commit 356bec "Support [address] in URLs", the comparison
"url != hostname" could be used to determine if the URL had a scheme
or not: "ssh://host/host" != "host".
However, after 356bec "[::1]" was converted into "::1", yielding
url != hostname as well. To fix this regression, don't use
"if (url != hostname)", but look at the separator instead.
Rename the variable "c" into "separator" to make it easier to read.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add test cases using git fetch-pack --diag-url:
- parse out host and path for URLs with a scheme (git:// file:// ssh://)
- parse host names embedded by [] correctly
- extract the port number, if present
- separate URLs like "file" (which are local)
from URLs like "host:repo" which should use ssh
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there is no sufficient overlap between old and new history
during a fetch into a shallow repository, we unnecessarily sent
objects the sending side knows the receiving end has.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
|
|
This is a testcase that checks for a problem where, during a specific
shallow fetch where the client does not have any commits that are a
successor of the new shallow root (i.e., the fetch creates a new
detached piece of history), the server would simply send over _all_
objects, instead of taking into account the objects already present in
the client.
The actual problem was fixed by a recent patch series by Nguyễn Thái
Ngọc Duy already.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fetch_pack() can remove .git/shallow file when a shallow repository
becomes a full one again. This behavior is triggered incorrectly when
tags are also fetched because fetch_pack() will be called twice. At
the first fetch_pack() call:
- shallow_lock is set up
- alternate_shallow_file points to shallow_lock.filename, which is
"shallow.lock"
- commit_lock_file is called, which sets shallow_lock.filename to "".
alternate_shallow_file also becomes "" because it points to the
same memory.
At the second call, setup_alternate_shallow() is not called and
alternate_shallow_file remains "". It's mistaken as unshallow case and
.git/shallow is removed. The end result is a broken repository.
Fix this by always initializing alternate_shallow_file when
fetch_pack() is called. As an extra measure, check if args->depth > 0
before commit/rollback shallow file.
Reported-by: Kacper Kornet <kornet@camk.edu.pl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cloning with "git clone --depth N" while fetch.fsckobjects (or
transfer.fsckobjects) is set to true did not tell the cut-off points
of the shallow history to the process that validates the objects and
the history received, causing the validation to fail.
* 'nd/clone-connectivity-shortcut' (early part):
fetch-pack: prepare updated shallow file before fetching the pack
clone: let the user know when check_everything_connected is run
|
|
Special case "git clone" and use lighter-weight implementation to
check the completeness of the history behind refs.
* nd/clone-connectivity-shortcut:
clone: open a shortcut for connectivity check
index-pack: remove dead code (it should never happen)
fetch-pack: prepare updated shallow file before fetching the pack
clone: let the user know when check_everything_connected is run
|
|
index-pack --strict looks up and follows parent commits. If shallow
information is not ready by the time index-pack is run, index-pack may
be led to non-existent objects. Make fetch-pack save shallow file to
disk before invoking index-pack.
git learns new global option --shallow-file to pass on the alternate
shallow file path. Undocumented (and not even support --shallow-file=
syntax) because it's unlikely to be used again elsewhere.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the client sends a 'shallow' line for an object that the server does
not have, the server should just ignore it and let the client keep that
unknown shallow boundary.
Signed-off-by: Michael Heemskerk <mheemskerk@atlassian.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent optimization broke shallow clones.
* jk/peel-ref:
upload-pack: load non-tip "want" objects from disk
upload-pack: make sure "want" objects are parsed
upload-pack: drop lookup-before-parse optimization
|
|
When upload-pack receives a "want" line from the client, it
adds it to an object array. We call lookup_object to find
the actual object, which will only check for objects already
in memory. This works because we are expecting to find
objects that we already loaded during the ref advertisement.
We use the resulting object structs for a variety of
purposes. Some of them care only about the object flags, but
others care about the type of the object (e.g.,
ok_to_give_up), or even feed them to the revision parser
(when --depth is used), which assumes that objects it
receives are fully parsed.
Once upon a time, this was OK; any object we loaded into
memory would also have been parsed. But since 435c833
(upload-pack: use peel_ref for ref advertisements,
2012-10-04), we try to avoid parsing objects during the ref
advertisement. This means that lookup_object may return an
object with a type of OBJ_NONE. The resulting mess depends
on the exact set of objects, but can include the revision
parser barfing, or the shallow code sending the wrong set of
objects.
This patch teaches upload-pack to parse each "want" object
as we receive it. We do not replace the lookup_object call
with parse_object, as the current code is careful not to let
just any object appear on a "want" line, but rather only one
we have previously advertised (whereas parse_object would
actually load any arbitrary object from disk).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_shallow_commits() is used to determine the cut points at a given
depth (i.e. the number of commits in a chain that the user likes to
get). However we count current depth up to the commit "commit" but we
do the cutting at its parents (i.e. current depth + 1). This makes
upload-pack always return one commit more than requested. This patch
fixes it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The user can do --depth=2147483647 (*) for restoring complete repo
now. But it's hard to remember. Any other numbers larger than the
longest commit chain in the repository would also do, but some
guessing may be involved. Make easy-to-remember --unshallow an alias
for --depth=2147483647.
Make upload-pack recognize this special number as infinite depth. The
effect is essentially the same as before, except that upload-pack is
more efficient because it does not have to traverse to the bottom
anymore.
The chance of a user actually wanting exactly 2147483647 commits
depth, not infinite, on a repository with a history that long, is
probably too small to consider. The client can learn to add or
subtract one commit to avoid the special treatment when that actually
happens.
(*) This is the largest positive number a 32-bit signed integer can
contain. JGit and older C Git store depth as "int" so both are OK
with this number. Dulwich does not support shallow clone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It used to be that if "--all", "--depth", and also explicit references
were sought, then the explicit references were not handled correctly
in filter_refs() because the "--all --depth" code took precedence over
the explicit reference handling, and the explicit references were
never noted as having been found. So check for explicitly sought
references before proceeding to the "--all --depth" logic.
This fixes two test cases in t5500.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a test in t5500.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fetch_pack() removes duplicates from the "sought" list, thereby
shrinking the list. But previously, the caller was not informed about
the shrinkage. This would cause a spurious error message to be
emitted by cmd_fetch_pack() if "git fetch-pack" is called with
duplicate refnames.
Instead, remove duplicates using string_list_remove_duplicates(),
which adjusts sought->nr to reflect the new length of the list.
The last test of t5500 inexplicably *required* "git fetch-pack" to
fail when fetching a list of references that contains duplicates;
i.e., it insisted on the buggy behavior. So change the test to expect
the correct behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document some bugs in "git fetch-pack":
1. If "git fetch-pack" is called with "--all", "--depth", and an
explicit existing non-tag reference to fetch, then it falsely reports
that the reference was not found, even though it was fetched
correctly.
2. If "git fetch-pack" is called with "--all", "--depth", and an
explicit existing tag reference to fetch, then it segfaults in
filter_refs() because return_refs is used without having been
initialized.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If "git fetch-pack" is called with reference names that do not exist
on the remote, then it should emit an error message
error: no such remote ref refs/heads/xyzzy
This is currently broken if *only* missing references are passed to
"git fetch-pack".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- do not fetch HEAD
- do not also fetch refs following "xxx"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl, may
fail to hold all of them. Now such an internal invocation can feed the
references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
Conflicts:
t/t5500-fetch-pack.sh
|
|
These test cases focus only on testing the parsing of refs on stdin,
without bothering with the rest of the fetch-pack machinery. We pass in
the refs using different combinations of command line and stdin and then
we watch fetch-pack's stdout to see whether it prints all the refs we
specified (but we ignore their order).
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Eric Sunshine
Junio C Hamano
Kirill Smelkov
Jeff King
Nguyễn Thái Ngọc Duy
David Turner
SZEDER Gábor
Jeff Hostetler
Jonathan Tan
Matt McCutchen
Gabriel Souza Franco
Elia Pinto
Torsten Bögershausen
Matthijs Kooijman
Michael Heemskerk
Michael Haggerty
Ivan Todoroski