| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's possible that users make a typo in the branch name. Stop and let
users recheck. Falling back to remote's HEAD is not documented any
way.
Except when using remote helper, the pack has not been transferred at
this stage yet so we don't waste much bandwidth.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When --single-branch is given, only one branch, either HEAD or one
specified by --branch, will be fetched. Also only tags that point to
the downloaded history are fetched.
This helps most in shallow clones, where it can reduce the download to
minimum and that is why it is enabled by default when --depth is given.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fetch-pack documentation is very clear that refs given
on the command line are to be full refs:
<refs>...::
The remote heads to update from. This is relative to
$GIT_DIR (e.g. "HEAD", "refs/heads/master"). When
unspecified, update from all heads the remote side has.
and this has been the case since fetch-pack was originally documented in
8b3d9dc ([PATCH] Documentation: clone/fetch/upload., 2005-07-14).
Let's follow our own documentation to set a good example,
and to avoid breaking when this restriction is enforced in
the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* np/maint-1.6.3-deepen:
fix simple deepening of a repo
Conflicts:
t/t5500-fetch-pack.sh
|
|
If all refs sent by the remote repo during a fetch are reachable
locally, then no further conversation is performed with the remote. This
check is skipped when the --depth argument is provided to allow the
deepening of a shallow clone which corresponding remote repo has no
changed.
However, some additional filtering was added in commit c29727d5 to
remove those refs which are equal on both sides. If the remote repo has
not changed, then the list of refs to give the remote process becomes
empty and simply attempting to deepen a shallow repo always fails.
Let's stop being smart in that case and simply send the whole list over
when that condition is met. The remote will do the right thing anyways.
Test cases for this issue are also provided.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code outside of the test harness was emitting "Initializing..." from
git-init. Fixup this test to be more modern:
- test_expect_object_count() and count_objects() are unused
- use grep directly instead of test "..." = $(grep ...)
- end the test_expect_success line with a single-quote and put the
test on a new line
- put as much code inside the test harness as possible
- no_strict_count_check is unused and duplicates the test
"new object count"
- use && whenever possible to catch errors early
- use test_tick instead of GIT_AUTHOR_DATE=$sec
- remove debugging aid log.txt
- use subshells instead of cd-ing around
Also merge the pull test into one large test.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Start 1.6.0.2 maintenance cycle
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
Fix passwd(5) ref and reflect that commit doens't use commit-tree
improve handling of sideband message display
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
checkout: fix message when leaving detached HEAD
clone: fix creation of explicitly named target directory
'git foo' program identifies itself without dash in die() messages
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
Start conforming code to "git subcmd" style
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
Conflicts:
RelNotes
t/t3900-i18n-commit.sh
t/t7003-filter-branch.sh
|
|
Converts tests between t3600-t6300.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adds the total pack size (including indexes) the verbose count-objects
output, floored to the nearest kilobyte.
Updates documentation to match this addition.
Signed-off-by: Marcus Griep <marcus@griep.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes the remainder of the issues where the test script itself is at
fault for failing when the git checkout path contains whitespace or other
shell metacharacters.
The majority of git svn tests used the idiom
test_expect_success "title" "test script using $svnrepo"
These were changed to have the test script in single-quotes:
test_expect_success "title" 'test script using "$svnrepo"'
which unfortunately makes the patch appear larger than it really is.
One consequence of this change is that in the verbose test output the
value of $svnrepo (and in some cases other variables, too) is no
longer expanded, i.e. previously we saw
* expecting success:
test script using /path/to/git/t/trash/svnrepo
but now it is:
* expecting success:
test script using "$svnrepo"
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This form is not portable across all shells, so replace instances of:
export FOO=bar
with:
FOO=bar
export FOO
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes the behaviour of cloning from a repository on the
local machine, by defaulting to "-l" (use hardlinks to share
files under .git/objects) and making "-l" a no-op. A new
option, --no-hardlinks, is also added to cause file-level copy
of files under .git/objects while still avoiding the normal
"pack to pipe, then receive and index pack" network transfer
overhead. The old behaviour of local cloning without -l nor -s
is availble by specifying the source repository with the newly
introduced file:///path/to/repo.git/ syntax (i.e. "same as
network" cloning).
* With --no-hardlinks (i.e. have all .git/objects/ copied via
cpio) would not catch the source repository corruption, and
also risks corrupted recipient repository if an
alpha-particle hits memory cell while indexing and resolving
deltas. As long as the recipient is created uncorrupted, you
have a good back-up.
* same-as-network is expensive, but it would catch the breakage
of the source repository. It still risks corrupted recipient
repository due to hardware failure. As long as the recipient
is created uncorrupted, you have a good back-up.
* The new default on the same filesystem, as long as the source
repository is healthy, it is very likely that the recipient
would be, too. Also it is very cheap. You do not get any
back-up benefit, though.
None of the method is resilient against the source repository
corruption, so let's discount that from the comparison. Then
the difference with and without --no-hardlinks matters primarily
if you value the back-up benefit or not. If you want to use the
cloned repository as a back-up, then it is cheaper to do a clone
with --no-hardlinks and two git-fsck (source before clone,
recipient after clone) than same-as-network clone, especially as
you are likely to do a git-fsck on the recipient if you are so
paranoid anyway.
Which leads me to believe that being able to use file:/// is
probably a good idea, if only for testability, but probably of
little practical value. We default to hardlinked clone for
everyday use, and paranoids can use --no-hardlinks as a way to
make a back-up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses the remove-dashes target to replace "git-frotz" to "git frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Tom Prince <tom.prince@ualberta.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows transfer.unpackLimit to specify what these two
configuration variables want to set.
We would probably want to deprecate the two separate variables,
as I do not see much point in specifying them independently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes git-fetch over git native protocol to automatically
decide to keep the downloaded pack if the fetch results in more
than 100 objects, just like receive-pack invoked by git-push
does. This logic is disabled when --keep is explicitly given
from the command line, so that a very small clone still keeps
the downloaded pack as before.
The 100 threshold can be adjusted with fetch.unpacklimit
configuration. We might want to introduce transfer.unpacklimit
to consolidate the two unpacklimit variables, which will be a
topic for the next patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is to adjust to:
count-objects -v: show number of packs as well.
which will break a test in this series.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
None of the variables seem to conflict, so local was unnecessary.
Also replaced ${var:pos:len} with the sed equivalent.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Relying on eye-candy progress bar was fragile to begin with.
Run fetch-pack with -k option, and count the objects that are in
the pack that were transferred from the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now pack-object is not as chatty when its stderr is not connected
to a terminal, so the test needs to be adjusted for that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
just for consistency.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This test provides a minimal example of what went wrong with the old
git-fetch-pack (and now works beautifully).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Nguyễn Thái Ngọc Duy
Jeff King
Jonathan Nieder
Junio C Hamano
Nicolas Pitre
Stephen Boyd
Nanako Shiraishi
Marcus Griep
Stephan Beyer
Bryan Donlan
Junio C Hamano
Tom Prince
Johannes Schindelin
Eric Wong