summaryrefslogtreecommitdiff
path: root/t/t5500-fetch-pack.sh
AgeCommit message (Collapse)AuthorFilesLines
2015-04-20Merge branch 'tb/connect-ipv6-parse-fix'Libravatar Junio C Hamano1-7/+10
An earlier update to the parser that disects an address broke an address, followed by a colon, followed by an empty string (instead of the port number). * tb/connect-ipv6-parse-fix: connect.c: ignore extra colon after hostname
2015-04-08connect.c: ignore extra colon after hostnameLibravatar Torsten Bögershausen1-7/+10
Ignore an extra ':' at the end of the hostname in URL's like "ssh://example.com:/path/to/repo" The colon is meant to separate a port number from the hostname. If the port is empty, the colon should be ignored, see RFC 3986. It had been working for URLs with ssh:// scheme, but was unintentionally broken in 86ceb3, "allow ssh://user@[2001:db8::1]/repo.git" Reported-by: Reid Woodbury Jr. <reidw@rawsound.com> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-22t5500: show user name and host in diag-urlLibravatar Torsten Bögershausen1-18/+33
The URL for ssh may have include a username before the hostname, like ssh://user@host/repo. When literal IPV6 addresses are used together with a username, the substring "user@[::1]" must be converted into "user@::1". Make that conversion visible for the user, and write userandhost in the diagnostics Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09connect.c: refactor url parsingLibravatar Torsten Bögershausen1-0/+7
Make the function is_local() in transport.c public, rename it into url_is_local_not_ssh() and use it in both transport.c and connect.c Use a protocol "local" for URLs for the local file system. One note about using file:// under Windows: The (absolute) path on Unix like system typically starts with "/". When the host is empty, it can be omitted, so that a shell scriptlet url=file://$pwd will give a URL like "file:///home/user/repo". Windows does not have the same concept of a root directory located in "/". When parsing the URL allow "file://C:/user/repo" (even if RFC1738 indicates that "file:///C:/user/repo" should be used). Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09git_connect(): refactor the port handling for sshLibravatar Torsten Bögershausen1-6/+3
Use get_host_and_port() even for ssh. Remove the variable port git_connect(), and simplify parse_connect_url() Use only one return point in git_connect(), doing the free() and return conn. t5601 had 2 corner test cases which now pass. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09git fetch: support host:/~repoLibravatar Torsten Bögershausen1-0/+24
The documentation (in urls.txt) says that "ssh://host:/~repo", "host:/~repo" or "host:~repo" specify the repository "repo" in the home directory at "host". This has not been working for "host:/~repo". Before commit 356bec "Support [address] in URLs", the comparison "url != hostname" could be used to determine if the URL had a scheme or not: "ssh://host/host" != "host". However, after 356bec "[::1]" was converted into "::1", yielding url != hostname as well. To fix this regression, don't use "if (url != hostname)", but look at the separator instead. Rename the variable "c" into "separator" to make it easier to read. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-09t5500: add test cases for diag-urlLibravatar Torsten Bögershausen1-0/+59
Add test cases using git fetch-pack --diag-url: - parse out host and path for URLs with a scheme (git:// file:// ssh://) - parse host names embedded by [] correctly - extract the port number, if present - separate URLs like "file" (which are local) from URLs like "host:repo" which should use ssh Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-20Merge branch 'nd/fetch-into-shallow'Libravatar Junio C Hamano1-0/+11
When there is no sufficient overlap between old and new history during a fetch into a shallow repository, we unnecessarily sent objects the sending side knows the receiving end has. * nd/fetch-into-shallow: Add testcase for needless objects during a shallow fetch list-objects: mark more commits as edges in mark_edges_uninteresting list-objects: reduce one argument in mark_edges_uninteresting upload-pack: delegate rev walking in shallow fetch to pack-objects shallow: add setup_temporary_shallow() shallow: only add shallow graft points to new shallow file move setup_alternate_shallow and write_shallow_commits to shallow.c
2013-08-28Add testcase for needless objects during a shallow fetchLibravatar Matthijs Kooijman1-0/+11
This is a testcase that checks for a problem where, during a specific shallow fetch where the client does not have any commits that are a successor of the new shallow root (i.e., the fetch creates a new detached piece of history), the server would simply send over _all_ objects, instead of taking into account the objects already present in the client. The actual problem was fixed by a recent patch series by Nguyễn Thái Ngọc Duy already. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-25fetch-pack: do not remove .git/shallow file when --depth is not specifiedLibravatar Nguyễn Thái Ngọc Duy1-0/+16
fetch_pack() can remove .git/shallow file when a shallow repository becomes a full one again. This behavior is triggered incorrectly when tags are also fetched because fetch_pack() will be called twice. At the first fetch_pack() call: - shallow_lock is set up - alternate_shallow_file points to shallow_lock.filename, which is "shallow.lock" - commit_lock_file is called, which sets shallow_lock.filename to "". alternate_shallow_file also becomes "" because it points to the same memory. At the second call, setup_alternate_shallow() is not called and alternate_shallow_file remains "". It's mistaken as unshallow case and .git/shallow is removed. The end result is a broken repository. Fix this by always initializing alternate_shallow_file when fetch_pack() is called. As an extra measure, check if args->depth > 0 before commit/rollback shallow file. Reported-by: Kacper Kornet <kornet@camk.edu.pl> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-28Merge branch 'nd/clone-connectivity-shortcut' (early part) into maintLibravatar Junio C Hamano1-0/+7
Cloning with "git clone --depth N" while fetch.fsckobjects (or transfer.fsckobjects) is set to true did not tell the cut-off points of the shallow history to the process that validates the objects and the history received, causing the validation to fail. * 'nd/clone-connectivity-shortcut' (early part): fetch-pack: prepare updated shallow file before fetching the pack clone: let the user know when check_everything_connected is run
2013-06-06Merge branch 'nd/clone-connectivity-shortcut'Libravatar Junio C Hamano1-0/+7
Special case "git clone" and use lighter-weight implementation to check the completeness of the history behind refs. * nd/clone-connectivity-shortcut: clone: open a shortcut for connectivity check index-pack: remove dead code (it should never happen) fetch-pack: prepare updated shallow file before fetching the pack clone: let the user know when check_everything_connected is run
2013-05-28fetch-pack: prepare updated shallow file before fetching the packLibravatar Nguyễn Thái Ngọc Duy1-0/+7
index-pack --strict looks up and follows parent commits. If shallow information is not ready by the time index-pack is run, index-pack may be led to non-existent objects. Make fetch-pack save shallow file to disk before invoking index-pack. git learns new global option --shallow-file to pass on the alternate shallow file path. Undocumented (and not even support --shallow-file= syntax) because it's unlikely to be used again elsewhere. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-02t5500: add test for fetching with an unknown 'shallow'Libravatar Michael Heemskerk1-0/+14
When the client sends a 'shallow' line for an object that the server does not have, the server should just ignore it and let the client keep that unknown shallow boundary. Signed-off-by: Michael Heemskerk <mheemskerk@atlassian.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-25Merge branch 'jk/peel-ref'Libravatar Junio C Hamano1-0/+9
Recent optimization broke shallow clones. * jk/peel-ref: upload-pack: load non-tip "want" objects from disk upload-pack: make sure "want" objects are parsed upload-pack: drop lookup-before-parse optimization
2013-03-16upload-pack: make sure "want" objects are parsedLibravatar Jeff King1-0/+9
When upload-pack receives a "want" line from the client, it adds it to an object array. We call lookup_object to find the actual object, which will only check for objects already in memory. This works because we are expecting to find objects that we already loaded during the ref advertisement. We use the resulting object structs for a variety of purposes. Some of them care only about the object flags, but others care about the type of the object (e.g., ok_to_give_up), or even feed them to the revision parser (when --depth is used), which assumes that objects it receives are fully parsed. Once upon a time, this was OK; any object we loaded into memory would also have been parsed. But since 435c833 (upload-pack: use peel_ref for ref advertisements, 2012-10-04), we try to avoid parsing objects during the ref advertisement. This means that lookup_object may return an object with a type of OBJ_NONE. The resulting mess depends on the exact set of objects, but can include the revision parser barfing, or the shallow code sending the wrong set of objects. This patch teaches upload-pack to parse each "want" object as we receive it. We do not replace the lookup_object call with parse_object, as the current code is careful not to let just any object appear on a "want" line, but rather only one we have previously advertised (whereas parse_object would actually load any arbitrary object from disk). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-11upload-pack: fix off-by-one depth calculation in shallow cloneLibravatar Nguyễn Thái Ngọc Duy1-6/+19
get_shallow_commits() is used to determine the cut points at a given depth (i.e. the number of commits in a chain that the user likes to get). However we count current depth up to the commit "commit" but we do the cutting at its parents (i.e. current depth + 1). This makes upload-pack always return one commit more than requested. This patch fixes it. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-11fetch: add --unshallow for turning shallow repo into complete oneLibravatar Nguyễn Thái Ngọc Duy1-0/+20
The user can do --depth=2147483647 (*) for restoring complete repo now. But it's hard to remember. Any other numbers larger than the longest commit chain in the repository would also do, but some guessing may be involved. Make easy-to-remember --unshallow an alias for --depth=2147483647. Make upload-pack recognize this special number as infinite depth. The effect is essentially the same as before, except that upload-pack is more efficient because it does not have to traverse to the bottom anymore. The chance of a user actually wanting exactly 2147483647 commits depth, not infinite, on a repository with a history that long, is probably too small to consider. The client can learn to add or subtract one commit to avoid the special treatment when that actually happens. (*) This is the largest positive number a 32-bit signed integer can contain. JGit and older C Git store depth as "int" so both are OK with this number. Dulwich does not support shallow clone. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-12fetch-pack: eliminate spurious error messagesLibravatar Michael Haggerty1-2/+2
It used to be that if "--all", "--depth", and also explicit references were sought, then the explicit references were not handled correctly in filter_refs() because the "--all --depth" code took precedence over the explicit reference handling, and the explicit references were never noted as having been found. So check for explicitly sought references before proceeding to the "--all --depth" logic. This fixes two test cases in t5500. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-12fetch-pack: report missing refs even if no existing refs were receivedLibravatar Michael Haggerty1-1/+1
This fixes a test in t5500. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-12fetch_pack(): update sought->nr to reflect number of unique entriesLibravatar Michael Haggerty1-1/+1
fetch_pack() removes duplicates from the "sought" list, thereby shrinking the list. But previously, the caller was not informed about the shrinkage. This would cause a spurious error message to be emitted by cmd_fetch_pack() if "git fetch-pack" is called with duplicate refnames. Instead, remove duplicates using string_list_remove_duplicates(), which adjusts sought->nr to reflect the new length of the list. The last test of t5500 inexplicably *required* "git fetch-pack" to fail when fetching a list of references that contains duplicates; i.e., it insisted on the buggy behavior. So change the test to expect the correct behavior. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-12t5500: add tests of fetch-pack --all --depth=N $URL $REFLibravatar Michael Haggerty1-0/+15
Document some bugs in "git fetch-pack": 1. If "git fetch-pack" is called with "--all", "--depth", and an explicit existing non-tag reference to fetch, then it falsely reports that the reference was not found, even though it was fetched correctly. 2. If "git fetch-pack" is called with "--all", "--depth", and an explicit existing tag reference to fetch, then it segfaults in filter_refs() because return_refs is used without having been initialized. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-12t5500: add tests of error output for missing refsLibravatar Michael Haggerty1-0/+30
If "git fetch-pack" is called with reference names that do not exist on the remote, then it should emit an error message error: no such remote ref refs/heads/xyzzy This is currently broken if *only* missing references are passed to "git fetch-pack". Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-22clone: fix ref selection in --single-branch --branch=xxxLibravatar Nguyễn Thái Ngọc Duy1-1/+6
- do not fetch HEAD - do not also fetch refs following "xxx" Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01Merge branch 'it/fetch-pack-many-refs' into maintLibravatar Junio C Hamano1-0/+66
When "git fetch" encounters repositories with too many references, the command line of "fetch-pack" that is run by a helper e.g. remote-curl, may fail to hold all of them. Now such an internal invocation can feed the references through the standard input of "fetch-pack". By Ivan Todoroski * it/fetch-pack-many-refs: remote-curl: main test case for the OS command line overflow fetch-pack: test cases for the new --stdin option remote-curl: send the refs to fetch-pack on stdin fetch-pack: new --stdin option to read refs from stdin Conflicts: t/t5500-fetch-pack.sh
2012-04-10fetch-pack: test cases for the new --stdin optionLibravatar Ivan Todoroski1-0/+66
These test cases focus only on testing the parsing of refs on stdin, without bothering with the rest of the fetch-pack machinery. We pass in the refs using different combinations of command line and stdin and then we watch fetch-pack's stdout to see whether it prints all the refs we specified (but we ignore their order). Signed-off-by: Ivan Todoroski <grnch@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-16clone: allow --branch to take a tagLibravatar Nguyễn Thái Ngọc Duy1-0/+15
Because a tag ref cannot be put to HEAD, HEAD will become detached. This is consistent with "git checkout <tag>". This is mostly useful in shallow clone, where it allows you to clone a tag in addtion to branches. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-16clone: refuse to clone if --branch points to bogus refLibravatar Nguyễn Thái Ngọc Duy1-7/+0
It's possible that users make a typo in the branch name. Stop and let users recheck. Falling back to remote's HEAD is not documented any way. Except when using remote helper, the pack has not been transferred at this stage yet so we don't waste much bandwidth. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08clone: add --single-branch to fetch only one branchLibravatar Nguyễn Thái Ngọc Duy1-1/+71
When --single-branch is given, only one branch, either HEAD or one specified by --branch, will be fetched. Also only tags that point to the downloaded history are fetched. This helps most in shallow clones, where it can reduce the download to minimum and that is why it is enabled by default when --depth is given. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-13t5500: give fully-qualified refs to fetch-packLibravatar Jeff King1-3/+3
The fetch-pack documentation is very clear that refs given on the command line are to be full refs: <refs>...:: The remote heads to update from. This is relative to $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When unspecified, update from all heads the remote side has. and this has been the case since fetch-pack was originally documented in 8b3d9dc ([PATCH] Documentation: clone/fetch/upload., 2005-07-14). Let's follow our own documentation to set a good example, and to avoid breaking when this restriction is enforced in the next patch. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09tests: add missing &&Libravatar Jonathan Nieder1-1/+1
Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain. Commands intended to fail should be marked with !, test_must_fail, or test_might_fail. The examples in this patch do not require that. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-28Merge branch 'np/maint-1.6.3-deepen'Libravatar Junio C Hamano1-0/+47
* np/maint-1.6.3-deepen: fix simple deepening of a repo Conflicts: t/t5500-fetch-pack.sh
2009-08-24fix simple deepening of a repoLibravatar Nicolas Pitre1-1/+46
If all refs sent by the remote repo during a fetch are reachable locally, then no further conversation is performed with the remote. This check is skipped when the --depth argument is provided to allow the deepening of a shallow clone which corresponding remote repo has no changed. However, some additional filtering was added in commit c29727d5 to remove those refs which are equal on both sides. If the remote repo has not changed, then the list of refs to give the remote process becomes empty and simply attempting to deepen a shallow repo always fails. Let's stop being smart in that case and simply send the whole list over when that condition is met. The remote will do the right thing anyways. Test cases for this issue are also provided. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-27t5500: Modernize test styleLibravatar Stephen Boyd1-127/+149
Code outside of the test harness was emitting "Initializing..." from git-init. Fixup this test to be more modern: - test_expect_object_count() and count_objects() are unused - use grep directly instead of test "..." = $(grep ...) - end the test_expect_success line with a single-quote and put the test on a new line - put as much code inside the test harness as possible - no_strict_count_check is unused and duplicates the test "new object count" - use && whenever possible to catch errors early - use test_tick instead of GIT_AUTHOR_DATE=$sec - remove debugging aid log.txt - use subshells instead of cd-ing around Also merge the pull test into one large test. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03Merge branch 'maint'Libravatar Junio C Hamano1-2/+2
* maint: Start 1.6.0.2 maintenance cycle tests: use "git xyzzy" form (t7200 - t9001) tests: use "git xyzzy" form (t7000 - t7199) Fix passwd(5) ref and reflect that commit doens't use commit-tree improve handling of sideband message display tests: use "git xyzzy" form (t3600 - t6999) tests: use "git xyzzy" form (t0000 - t3599) checkout: fix message when leaving detached HEAD clone: fix creation of explicitly named target directory 'git foo' program identifies itself without dash in die() messages setup_git_directory(): fix move to worktree toplevel directory update-index: fix worktree setup Start conforming code to "git subcmd" style read-tree: setup worktree if merge is required grep: fix worktree setup diff*: fix worktree setup Conflicts: RelNotes t/t3900-i18n-commit.sh t/t7003-filter-branch.sh
2008-09-03tests: use "git xyzzy" form (t3600 - t6999)Libravatar Nanako Shiraishi1-2/+2
Converts tests between t3600-t6300. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-17count-objects: Add total pack size to verbose outputLibravatar Marcus Griep1-1/+1
Adds the total pack size (including indexes) the verbose count-objects output, floored to the nearest kilobyte. Updates documentation to match this addition. Signed-off-by: Marcus Griep <marcus@griep.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-1/+1
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Fix tests breaking when checkout path contains shell metacharactersLibravatar Bryan Donlan1-1/+1
This fixes the remainder of the issues where the test script itself is at fault for failing when the git checkout path contains whitespace or other shell metacharacters. The majority of git svn tests used the idiom test_expect_success "title" "test script using $svnrepo" These were changed to have the test script in single-quotes: test_expect_success "title" 'test script using "$svnrepo"' which unfortunately makes the patch appear larger than it really is. One consequence of this change is that in the verbose test output the value of $svnrepo (and in some cases other variables, too) is no longer expanded, i.e. previously we saw * expecting success: test script using /path/to/git/t/trash/svnrepo but now it is: * expecting success: test script using "$svnrepo" Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Don't use the 'export NAME=value' in the test scripts.Libravatar Bryan Donlan1-1/+1
This form is not portable across all shells, so replace instances of: export FOO=bar with: FOO=bar export FOO Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01Sane use of test_expect_failureLibravatar Junio C Hamano1-2/+2
Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01git-clone: aggressively optimize local clone behaviour.Libravatar Junio C Hamano1-1/+1
This changes the behaviour of cloning from a repository on the local machine, by defaulting to "-l" (use hardlinks to share files under .git/objects) and making "-l" a no-op. A new option, --no-hardlinks, is also added to cause file-level copy of files under .git/objects while still avoiding the normal "pack to pipe, then receive and index pack" network transfer overhead. The old behaviour of local cloning without -l nor -s is availble by specifying the source repository with the newly introduced file:///path/to/repo.git/ syntax (i.e. "same as network" cloning). * With --no-hardlinks (i.e. have all .git/objects/ copied via cpio) would not catch the source repository corruption, and also risks corrupted recipient repository if an alpha-particle hits memory cell while indexing and resolving deltas. As long as the recipient is created uncorrupted, you have a good back-up. * same-as-network is expensive, but it would catch the breakage of the source repository. It still risks corrupted recipient repository due to hardware failure. As long as the recipient is created uncorrupted, you have a good back-up. * The new default on the same filesystem, as long as the source repository is healthy, it is very likely that the recipient would be, too. Also it is very cheap. You do not get any back-up benefit, though. None of the method is resilient against the source repository corruption, so let's discount that from the comparison. Then the difference with and without --no-hardlinks matters primarily if you value the back-up benefit or not. If you want to use the cloned repository as a back-up, then it is cheaper to do a clone with --no-hardlinks and two git-fsck (source before clone, recipient after clone) than same-as-network clone, especially as you are likely to do a git-fsck on the recipient if you are so paranoid anyway. Which leads me to believe that being able to use file:/// is probably a good idea, if only for testability, but probably of little practical value. We default to hardlinked clone for everyday use, and paranoids can use --no-hardlinks as a way to make a back-up. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-15/+15
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-01-28git-fsck-objects is now synonym to git-fsckLibravatar Junio C Hamano1-3/+3
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28[PATCH] Rename git-repo-config to git-config.Libravatar Tom Prince1-1/+1
Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-24Consolidate {receive,fetch}.unpackLimitLibravatar Junio C Hamano1-1/+1
This allows transfer.unpackLimit to specify what these two configuration variables want to set. We would probably want to deprecate the two separate variables, as I do not see much point in specifying them independently. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-24fetch-pack: remove --keep-auto and make it the default.Libravatar Junio C Hamano1-1/+2
This makes git-fetch over git native protocol to automatically decide to keep the downloaded pack if the fetch results in more than 100 objects, just like receive-pack invoked by git-push does. This logic is disabled when --keep is explicitly given from the command line, so that a very small clone still keeps the downloaded pack as before. The 100 threshold can be adjusted with fetch.unpacklimit configuration. We might want to introduce transfer.unpacklimit to consolidate the two unpacklimit variables, which will be a topic for the next patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-12use 'init' instead of 'init-db' for shipped docs and toolsLibravatar Nicolas Pitre1-1/+1
While 'init-db' still is and probably will always remain a valid git command for obvious backward compatibility reasons, it would be a good idea to move shipped tools and docs to using 'init' instead. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-27Merge branch 'master' into js/shallowLibravatar Junio C Hamano1-2/+7
This is to adjust to: count-objects -v: show number of packs as well. which will break a test in this series. Signed-off-by: Junio C Hamano <junkio@cox.net>