summaryrefslogtreecommitdiff
path: root/t/t5401-update-hooks.sh
AgeCommit message (Collapse)AuthorFilesLines
2009-07-29Refuse updating the current branch in a non-bare repository via pushLibravatar Junio C Hamano1-0/+1
This makes git-push refuse pushing into a non-bare repository to update the current branch by default. To help people who are used to be able to do this (and later "reset --hard" it in some other way), an error message is issued when this refusal is triggered, instructing how to resurrect the old behaviour. Hosting sites that do not give the users direct access to customize their repositories (e.g. repo.or.cz, gitorious, github etc.) may further want to explicitly set the configuration variable to "refuse" for their customers' repositories. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03tests: use "git xyzzy" form (t3600 - t6999)Libravatar Nanako Shiraishi1-2/+2
Converts tests between t3600-t6300. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-1/+2
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-24tests: do not use implicit "git diff --no-index"Libravatar Junio C Hamano1-5/+5
As a general principle, we should not use "git diff" to validate the results of what git command that is being tested has done. We would not know if we are testing the command in question, or locating a bug in the cute hack of "git diff --no-index". Rather use test_cmp for that purpose. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01Sane use of test_expect_failureLibravatar Junio C Hamano1-4/+4
Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-30Use 'printf %s $x' notation in t5401Libravatar Shawn O. Pearce1-4/+4
We only care about getting what should be an empty string and sending it to a file, without a trailing LF, so the empty string translates into a 0 byte file. Earlier when I originally wrote these lines Mac OS X allowed the format string of printf to be the empty string, but more recent versions appear to have been 'improved' with error messages if the format is not given. This may cause problems if we ever wind up with changes to the hook tests. A minor cleanup makes the test more safe on all systems, by conforming to accepted printf conventions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-05t/t{3600,3800,5401}: do not use egrep when grep would doLibravatar Junio C Hamano1-1/+1
There is nothing _wrong_ with egrep per se, but this way we would have less dependency on external tools. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-13/+13
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-03-11Change {pre,post}-receive hooks to use stdinLibravatar Shawn O. Pearce1-14/+16
Sergey Vlasov, Andy Parkins and Alex Riesen all pointed out that it is possible for a single invocation of receive-pack to be given more refs than the OS might allow us to pass as command line parameters to a single hook invocation. We don't want to break these up into multiple invocations (like xargs might do) as that makes it impossible for the pre-receive hook to verify multiple related ref updates occur at the same time, and it makes it harder for post-receive to send out a single batch notification. Instead we pass the reference data on a pipe connected to the hook's stdin, supplying one ref per line to the hook. This way a single hook invocation can obtain an infinite amount of ref data, without bumping into any operating system limits. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-10Merge branch 'js/diff-ni'Libravatar Junio C Hamano1-5/+5
* js/diff-ni: Get rid of the dependency to GNU diff in the tests diff --no-index: support /dev/null as filename diff-ni: fix the diff with standard input diff: support reading a file from stdin via "-"
2007-03-07Teach receive-pack to run pre-receive/post-receive hooksLibravatar Shawn O. Pearce1-20/+73
Bill Lear pointed out that it is easy to send out notifications of changes with the update hook, but successful execution of the update hook does not necessarily mean that the ref was actually updated. Lock contention on the ref or being unable to append to the reflog may prevent the ref from being changed. Sending out notifications prior to the ref actually changing is very misleading. To help this situation I am introducing two new hooks to the receive-pack flow: pre-receive and post-receive. These new hooks are invoked only once per receive-pack execution and are passed three arguments per ref (refname, old-sha1, new-sha1). The new post-receive hook is ideal for sending out notifications, as it has the complete list of all refnames that were successfully updated as well as the old and new SHA-1 values. This allows more interesting notifications to be sent. Multiple ref updates could be easily summarized into one email, for example. The new pre-receive hook is ideal for logging update attempts, as it is run only once for the entire receive-pack operation. It can also be used to verify multiple updates happen at once, e.g. an update to the `maint` head must also be accompained by a new annotated tag. Lots of documentation improvements for receive-pack are included in this change, as we want to make sure the new hooks are clearly explained. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04Get rid of the dependency to GNU diff in the testsLibravatar Johannes Schindelin1-2/+2
Now that "git diff" handles stdin and relative paths outside the working tree correctly, we can convert all instances of "diff -u" to "git diff". This commit is really the result of $ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net> (cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
2007-01-15Replace "echo -n" with printf in shell scripts.Libravatar Jason Riedy1-2/+2
Not all echos know -n. This was causing a test failure in t5401-update-hooks.sh, but not t3800-mktag.sh for some reason. Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-31Add test case for update hooks in receive-pack.Libravatar Shawn O. Pearce1-0/+81
Verify that the update hooks work as documented/advertised. This is a simple set of tests to check that the update hooks run with the parameters expected, have their STDOUT and STDERR redirected to the client side of the connection, and that their STDIN does not contain any data (as its actually /dev/null). Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>