| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When there is no object to write .bitmap file for, "git
multi-pack-index" triggered an error, instead of just skipping,
which has been corrected.
* tb/midx-no-bitmap-for-no-objects:
midx: prevent writing a .bitmap without any objects
|
|
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When opening a MIDX/pack-bitmap, we call open_midx_bitmap_1() or
open_pack_bitmap_1() respectively in a loop over the set of MIDXs/packs.
By design, these functions are supposed to be called over every pack and
MIDX, since only one of them should have a valid bitmap.
Ordinarily we return '0' from these two functions in order to indicate
that we successfully loaded a bitmap To signal that we couldn't load a
bitmap corresponding to the MIDX/pack (either because one doesn't exist,
or because there was an error with loading it), we can return '-1'. In
either case, the callers each enumerate all MIDXs/packs to ensure that
at most one bitmap per-kind is present.
But when we fail to load a bitmap that does exist (for example, loading
a MIDX bitmap without finding a corresponding reverse index), we'll
return -1 but leave the 'midx' field non-NULL. So when we fallback to
loading a pack bitmap, we'll complain that the bitmap we're trying to
populate already is "opened", even though it isn't.
Rectify this by setting the '->pack' and '->midx' field back to NULL as
appropriate. Two tests are added: one to ensure that the MIDX-to-pack
bitmap fallback works, and another to ensure we still complain when
there are multiple pack bitmaps in a repository.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a MIDX contains the new `RIDX` chunk, ensure that the reverse index
is read from it instead of the on-disk .rev file. Since we need to
encode the object order in the MIDX itself for correctness reasons,
there is no point in storing the same data again outside of the MIDX.
So, this patch stops writing separate .rev files, and reads it out of
the MIDX itself. This is possible to do with relatively little new code,
since the format of the RIDX chunk is identical to the data in the .rev
file. In other words, we can implement this by pointing the
`revindex_data` field at the reverse index chunk of the MIDX instead of
the .rev file without any other changes.
Note that we have two knobs that are adjusted for the new tests:
GIT_TEST_MIDX_WRITE_REV and GIT_TEST_MIDX_READ_RIDX. The former controls
whether the MIDX .rev is written at all, and the latter controls whether
we read the MIDX's RIDX chunk.
Both are necessary to ensure that the test added at the beginning of
this series continues to work. This is because we always need to write
the RIDX chunk in the MIDX in order to change its checksum, but we want
to make sure reading the existing .rev file still works (since the RIDX
chunk takes precedence by default).
Arguably this isn't a very interesting mode to test, because the
precedence rules mean that we'll always read the RIDX chunk over the
.rev file. But it makes it impossible for a user to induce corruption in
their repository by adjusting the test knobs (since if we had an
either/or knob they could stop writing the RIDX chunk, allowing them to
tweak the MIDX's object order without changing its checksum).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t5326, we have a handful of tests that we would like to run twice:
once using the MIDX's new `RIDX` chunk as the source of the
reverse-index cache, and once using the separate `.rev` file.
But because these tests mutate the state of the underlying repository,
and then make assumptions about those mutations occurring in a certain
sequence, simply running the tests twice in the same repository is
awkward.
Instead, extract the core of interesting tests into t/lib-bitmap.sh to
prepare for them to be run twice, each in a separate test script. This
means that they can each operate on a separate repository, removing any
concerns about mutating state.
For now, this patch is a strict cut-and-paste of some tests from t5326.
The tests which did not move are not interesting with respect to the
source of their reverse index data.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To determine which source of data is used for the MIDX's reverse index
cache, introduce a helper which forces loading the reverse index, and
then looks for the special trace2 event introduced in a previous commit.
For now, this helper just looks for when the legacy MIDX .rev file was
loaded, but in a subsequent commit will become parameterized over the
the reverse index's source.
This function replaces checking for the existence of the .rev file. We
could write a similar helper to ensure that the .rev file is cleaned up
after repacking, but it will make subsequent tests more difficult to
write, and provides marginal value since we already check that the MIDX
.bitmap file is removed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The core.multiPackIndex config became true by default back in 18e449f86b
(midx: enable core.multiPackIndex by default, 2020-09-25), so it is no
longer necessary to enable it explicitly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch demonstrates a bug where a MIDX's auxiliary object
order can become out of sync with a MIDX bitmap.
This is because of two confounding factors:
- First, the object order is stored in a file which is named according
to the multi-pack index's checksum, and the MIDX does not store the
object order. This means that the object order can change without
altering the checksum.
- But the .rev file is moved into place with finalize_object_file(),
which link(2)'s the file into place instead of renaming it. For us,
that means that a modified .rev file will not be moved into place if
MIDX's checksum was unchanged.
This fix is to force the MIDX's checksum to change when the preferred
pack changes but the set of packs contained in the MIDX does not. In
other words, when the object order changes, the MIDX's checksum needs to
change with it (regardless of whether the MIDX is tracking the same or
different packs).
This prevents a race whereby changing the object order (but not the
packs themselves) enables a reader to see the new .rev file with the old
MIDX, or similarly seeing the new bitmap with the old object order.
But why can't we just stop hardlinking the .rev into place instead
adding additional data to the MIDX? Suppose that's what we did. Then
when we go to generate the new bitmap, we'll load the old MIDX bitmap,
along with the MIDX that it references. That's fine, since the new MIDX
isn't moved into place until after the new bitmap is generated. But the
new object order *has* been moved into place. So we'll read the old
bitmaps in the new order when generating the new bitmap file, meaning
that without this secondary change, bitmap generation itself would
become a victim of the race described here.
This can all be prevented by forcing the MIDX's checksum to change when
the object order does. By embedding the entire object order into the
MIDX, we do just that. That is, the MIDX's checksum will change in
response to any perturbation of the underlying object order. In t5326,
this will cause the MIDX's checksum to update (even without changing the
set of packs in the MIDX), preventing the stale read problem.
Note that this makes it safe to continue to link(2) the MIDX .rev file
into place, since it is now impossible to have a .rev file that is
out-of-sync with the MIDX whose checksum it references. (But we will do
away with MIDX .rev files later in this series anyway, so this is
somewhat of a moot point).
In theory, it is possible to store a "fingerprint" of the full object
order here, so long as that fingerprint changes at least as often as the
full object order does. Some possibilities here include storing the
identity of the preferred pack, along with the mtimes of the
non-preferred packs in a consistent order. But storing a limited part of
the information makes it difficult to reason about whether or not there
are gaps between the two that would cause us to get bitten by this bug
again.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch demonstrates a cause of bitmap corruption that can occur when
the contents of the multi-pack index does not change, but the underlying
object order does.
In this example, we have a MIDX containing two packs, each with a
distinct set of objects (pack A corresponds to the tree, blob, and
commit from the first patch, and pack B corresponds to the second
patch).
First, a MIDX is written where the 'A' pack is preferred. As expected,
the bitmaps generated there are in-tact. But then, we generate an
identical MIDX with a different object order: this time preferring pack
'B'.
Due to a bug which will be explained and fixed in the following commit,
the MIDX is updated, but the .rev file is not, causing the .bitmap file
to be read incorrectly. Specifically, the .bitmap file will contain
correct data, but the auxiliary object order in the .rev file is stale,
causing readers to get confused by reading the new bitmaps using the old
object order.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
|
|
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we both can propagate values from the hashcache, and respect
the configuration to enable the hashcache at all, test that both of
these function correctly by hardening their behavior with a test.
Like the hash-cache in classic single-pack bitmaps, this helps more
proportionally the more up-to-date your bitmap coverage is. When our
bitmap coverage is out-of-date with the ref tips, we spend more time
proportionally traversing, and all of that traversal gets the name-hash
filled in.
But for the up-to-date bitmaps, this helps quite a bit. These numbers
are on git.git, with `pack.threads=1` to help see the difference
reflected in the overall runtime.
Test origin/tb/multi-pack-bitmaps HEAD
-------------------------------------------------------------------------------------
5326.4: simulated clone 1.87(1.80+0.07) 1.46(1.42+0.03) -21.9%
5326.5: simulated fetch 2.66(2.61+0.04) 1.47(1.43+0.04) -44.7%
5326.6: pack to file (bitmap) 2.74(2.62+0.12) 1.89(1.82+0.07) -31.0%
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch introduces a new test, t5326, which tests the basic
functionality of multi-pack bitmaps.
Some trivial behavior is tested, such as:
- Whether bitmaps can be generated with more than one pack.
- Whether clones can be served with all objects in the bitmap.
- Whether follow-up fetches can be served with some objects outside of
the server's bitmap
These use lib-bitmap's tests (which in turn were pulled from t5310), and
we cover cases where the MIDX represents both a single pack and multiple
packs.
In addition, some non-trivial and MIDX-specific behavior is tested, too,
including:
- Whether multi-pack bitmaps behave correctly with respect to the
pack-reuse machinery when the base for some object is selected from
a different pack than the delta.
- Whether multi-pack bitmaps correctly respect the
pack.preferBitmapTips configuration.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Taylor Blau