| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --[no-]progress to git commit-graph write and verify.
The progress feature was introduced in 7b0f229
("commit-graph write: add progress output", 2018-09-17) but
the ability to opt-out was overlooked.
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
|
|
The commit-graph feature has seen a lot of activity in the past
year or so since it was introduced. The feature is a critical
performance enhancement for medium- to large-sized repos, and
does not significantly hurt small repos.
Change the defaults for core.commitGraph and gc.writeCommitGraph
to true so users benefit from this feature by default.
There are several places in the test suite where the environment
variable GIT_TEST_COMMIT_GRAPH is disabled to avoid reading a
commit-graph, if it exists. The config option overrides the
environment, so swap these. Some GIT_TEST_COMMIT_GRAPH assignments
remain, and those are to avoid writing a commit-graph when a new
commit is created.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 1771be90 "commit-graph: merge commit-graph chains" (2019-06-18),
the method sort_and_scan_merged_commits() was added to merge the
commit lists of two commit-graph files in the incremental format.
Unfortunately, there was an off-by-one error in that method around
incrementing num_extra_edges, which leads to an incorrect offset
for the base graph chunk.
When we store an octopus merge in the commit-graph file, we store
the first parent in the normal place, but use the second parent
position to point into the "extra edges" chunk where the remaining
parents exist. This means we should be adding "num_parents - 1"
edges to this list, not "num_parents - 2". That is the basic error.
The reason this was not caught in the test suite is more subtle.
In 5324-split-commit-graph.sh, we test creating an octopus merge
and adding it to the tip of a commit-graph chain, then verify the
result. This _should_ have caught the problem, except that when
we load the commit-graph files we were overly careful to not fail
when the commit-graph chain does not match. This care was on
purpose to avoid race conditions as one process reads the chain
and another process modifies it. In such a case, the reading
process outputs the following message to stderr:
warning: commit-graph chain does not match
These warnings are output in the test suite, but ignored. By
checking the stderr of `git commit-graph verify` to include
the expected progress output, it will now catch this error.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git commit-graph verify' subcommand loads a commit-graph from
a given object directory instead of using the standard method
prepare_commit_graph(). During development of load_commit_graph_chain(),
a version did not include prepare_alt_odb() as it was previously
run by prepare_commit_graph() in most cases.
Add a test that prevents that mistake from happening again.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing commit-graph files, we append path data to an
object directory, which may be specified by the user via the
'--object-dir' option. If the user supplies a trailing slash,
or some other alternative path format, the resulting path may
be usable for writing to the correct location. However, when
expiring graph files from the <obj-dir>/info/commit-graphs
directory during a write, we need to compare paths with exact
string matches.
Normalize the commit-graph filenames to avoid ambiguity. This
creates extra allocations, but this is a constant multiple of
the number of commit-graph files, which should be a number in
the single digits.
Further normalize the object directory in the context. Due to
a comparison between g->obj_dir and ctx->obj_dir in
split_graph_merge_strategy(), a trailing slash would prevent
any merging of layers within the same object directory. The
check is there to ensure we do not merge across alternates.
Update the tests to include a case with this trailing slash
problem.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We allow sharing commit-graph files across alternates. When we are
writing a split commit-graph, we allow adding tip graph files that
are not in the alternate, but include commits from our local repo.
However, if our alternate is not using the split commit-graph format,
its file is at .git/objects/info/commit-graph and we are trying to
write files in .git/objects/info/commit-graphs/graph-{hash}.graph.
We already have logic to ensure we do not merge across alternate
boundaries, but we also cannot have a commit-graph chain to our
alternate if uses the old filename structure.
Create a test that verifies we create a new split commit-graph
with only one level and we do not modify the existing commit-graph
in the alternate.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Octopus merges require an extra chunk of data in the commit-graph
file format. Create a test that ensures the new --split option
continues to work with an octopus merge. Specifically, ensure
that the octopus merge has parents across layers to truly check
that our graph position logic holds up correctly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we write a commit-graph file without the split option, then
we write to $OBJDIR/info/commit-graph and start to ignore
the chains in $OBJDIR/info/commit-graphs/.
Unlink the commit-graph-chain file and expire the graph-{hash}.graph
files in $OBJDIR/info/commit-graphs/ during every write.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we wrote a commit-graph chain, we only modified the tip file in
the chain. It is valuable to verify what we wrote, but not waste
time checking files we did not write.
Add a '--shallow' option to the 'git commit-graph verify' subcommand
and check that it does not read the base graph in a two-file chain.
Making the verify subcommand read from a chain of commit-graphs takes
some rearranging of the builtin code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The split commit-graph feature is now fully implemented, but needs
some more run-time configurability. Allow direct callers to 'git
commit-graph write --split' to specify the values used in the
merge strategy and the expire time.
Update the documentation to specify these values.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we merge commit-graph files in a commit-graph chain, we should clean
up the files that are no longer used.
This change introduces an 'expiry_window' value to the context, which is
always zero (for now). We then check the modified time of each
graph-{hash}.graph file in the $OBJDIR/info/commit-graphs folder and
unlink the files that are older than the expiry_window.
Since this is always zero, this immediately clears all unused graph
files. We will update the value to match a config setting in a future
change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an environment like a fork network, it is helpful to have a
commit-graph chain that spans both the base repo and the fork repo. The
fork is usually a small set of data on top of the large repo, but
sometimes the fork is much larger. For example, git-for-windows/git has
almost double the number of commits as git/git because it rebases its
commits on every major version update.
To allow cross-alternate commit-graph chains, we need a few pieces:
1. When looking for a graph-{hash}.graph file, check all alternates.
2. When merging commit-graph chains, do not merge across alternates.
3. When writing a new commit-graph chain based on a commit-graph file
in another object directory, do not allow success if the base file
has of the name "commit-graph" instead of
"commit-graphs/graph-{hash}.graph".
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new "--split" option to the 'git commit-graph write' subcommand. This
option allows the optional behavior of writing a commit-graph chain.
The current behavior will add a tip commit-graph containing any commits that
are not in the existing commit-graph or commit-graph chain. Later changes
will allow merging the chain and expiring out-dated files.
Add a new test script (t5324-split-commit-graph.sh) that demonstrates this
behavior.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Derrick Stolee
Garima Singh
Junio C Hamano