summaryrefslogtreecommitdiff
path: root/t/t5324-split-commit-graph.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-09-29Merge branch 'tb/bloom-improvements'Libravatar Junio C Hamano1-0/+13
"git commit-graph write" learned to limit the number of bloom filters that are computed from scratch with the --max-new-filters option. * tb/bloom-improvements: commit-graph: introduce 'commitGraph.maxNewFilters' builtin/commit-graph.c: introduce '--max-new-filters=<n>' commit-graph: rename 'split_commit_graph_opts' bloom: encode out-of-bounds filters as non-empty bloom/diff: properly short-circuit on max_changes bloom: use provided 'struct bloom_filter_settings' bloom: split 'get_bloom_filter()' in two commit-graph.c: store maximum changed paths commit-graph: respect 'commitGraph.readChangedPaths' t/helper/test-read-graph.c: prepare repo settings commit-graph: pass a 'struct repository *' in more places t4216: use an '&&'-chain commit-graph: introduce 'get_bloom_filter_settings()'
2020-09-09commit-graph: introduce 'get_bloom_filter_settings()'Libravatar Taylor Blau1-0/+13
Many places in the code often need a pointer to the commit-graph's 'struct bloom_filter_settings', in which case they often take the value from the top-most commit-graph. In the non-split case, this works as expected. In the split case, however, things get a little tricky. Not all layers in a chain of incremental commit-graphs are required to themselves have Bloom data, and so whether or not some part of the code uses Bloom filters depends entirely on whether or not the top-most level of the commit-graph chain has Bloom filters. This has been the behavior since Bloom filters were introduced, and has been codified into the tests since a759bfa9ee (t4216: add end to end tests for git log with Bloom filters, 2020-04-06). In fact, t4216.130 requires that Bloom filters are not used in exactly the case described earlier. There is no reason that this needs to be the case, since it is perfectly valid for commits in an earlier layer to have Bloom filters when commits in a newer layer do not. Since Bloom settings are guaranteed in practice to be the same for any layer in a chain that has Bloom data, it is sufficient to traverse the '->base_graph' pointer until either (1) a non-null 'struct bloom_filter_settings *' is found, or (2) until we are at the root of the commit-graph chain. Introduce a 'get_bloom_filter_settings()' function that does just this, and use it instead of purely dereferencing the top-most graph's '->bloom_filter_settings' pointer. While we're at it, add an additional test in t5324 to guard against code in the commit-graph writing machinery that doesn't correctly handle a NULL 'struct bloom_filter *'. Co-authored-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-17commit-graph: use the "hash version" byteLibravatar Derrick Stolee1-1/+4
The commit-graph format reserved a byte among the header of the file to store a "hash version". During the SHA-256 work, this was not modified because file formats are not necessarily intended to work across hash versions. If a repository has SHA-256 as its hash algorithm, it automatically up-shifts the lengths of object names in all necessary formats. However, since we have this byte available for adjusting the version, we can make the file formats more obviously incompatible instead of relying on other context from the repository. Update the oid_version() method in commit-graph.c to add a new value, 2, for sha-256. This automatically writes the new value in a SHA-256 repository _and_ verifies the value is correct. This is a breaking change relative to the current 'master' branch since 092b677 (Merge branch 'bc/sha-256-cvs-svn-updates', 2020-08-13) but it is not breaking relative to any released version of Git. The test impact is relatively minor: the output of 'test-tool read-graph' lists the header information, so those instances of '1' need to be replaced with a variable determined by GIT_TEST_DEFAULT_HASH. A more careful test is added that specifically creates a repository of each type then swaps the commit-graph files. The important value here is that the "git log" command succeeds while writing a message to stderr. Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-11Merge branch 'bc/sha-256-part-3'Libravatar Junio C Hamano1-1/+0
The final leg of SHA-256 transition. * bc/sha-256-part-3: (39 commits) t: remove test_oid_init in tests docs: add documentation for extensions.objectFormat ci: run tests with SHA-256 t: make SHA1 prerequisite depend on default hash t: allow testing different hash algorithms via environment t: add test_oid option to select hash algorithm repository: enable SHA-256 support by default setup: add support for reading extensions.objectformat bundle: add new version for use with SHA-256 builtin/verify-pack: implement an --object-format option http-fetch: set up git directory before parsing pack hashes t0410: mark test with SHA1 prerequisite t5308: make test work with SHA-256 t9700: make hash size independent t9500: ensure that algorithm info is preserved in config t9350: make hash size independent t9301: make hash size independent t9300: use $ZERO_OID instead of hard-coded object ID t9300: abstract away SHA-1-specific constants t8011: make hash size independent ...
2020-07-30t: remove test_oid_init in testsLibravatar brian m. carlson1-1/+0
Now that we call test_oid_init in the setup for all test scripts, there's no point in calling it individually. Remove all of the places where we've done so to help keep tests tidy. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-07t5324: reorder `run_with_limited_open_files test_might_fail`Libravatar Denton Liu1-1/+1
In the future, we plan on only allowing `test_might_fail` to work on a restricted subset of commands, including `git`. Reorder the commands so that `run_with_limited_open_files` comes before `test_might_fail`. This way, `test_might_fail` operates on a git command. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-05-05Merge branch 'tb/commit-graph-perm-bits'Libravatar Junio C Hamano1-0/+24
Some of the files commit-graph subsystem keeps on disk did not correctly honor the core.sharedRepository settings and some were left read-write. * tb/commit-graph-perm-bits: commit-graph.c: make 'commit-graph-chain's read-only commit-graph.c: ensure graph layers respect core.sharedRepository commit-graph.c: write non-split graphs as read-only lockfile.c: introduce 'hold_lock_file_for_update_mode' tempfile.c: introduce 'create_tempfile_mode'
2020-05-01Merge branch 'gs/commit-graph-path-filter'Libravatar Junio C Hamano1-0/+1
Introduce an extension to the commit-graph to make it efficient to check for the paths that were modified at each commit using Bloom filters. * gs/commit-graph-path-filter: bloom: ignore renames when computing changed paths commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag t4216: add end to end tests for git log with Bloom filters revision.c: add trace2 stats around Bloom filter usage revision.c: use Bloom filters to speed up path based revision walks commit-graph: add --changed-paths option to write subcommand commit-graph: reuse existing Bloom filters during write commit-graph: write Bloom filters to commit graph file commit-graph: examine commits by generation number commit-graph: examine changed-path objects in pack order commit-graph: compute Bloom filters for changed paths diff: halt tree-diff early after max_changes bloom.c: core Bloom filter implementation for changed paths. bloom.c: introduce core Bloom filter constructs bloom.c: add the murmur3 hash implementation commit-graph: define and use MAX_NUM_CHUNKS
2020-05-01Merge branch 'tb/commit-graph-fd-exhaustion-fix'Libravatar Junio C Hamano1-0/+13
The commit-graph code exhausted file descriptors easily when it does not have to. * tb/commit-graph-fd-exhaustion-fix: commit-graph: close descriptors after mmap commit-graph.c: gracefully handle file descriptor exhaustion t/test-lib.sh: make ULIMIT_FILE_DESCRIPTORS available to tests commit-graph.c: don't use discarded graph_name in error
2020-05-01Merge branch 'tb/commit-graph-split-strategy'Libravatar Junio C Hamano1-0/+30
"git commit-graph write" learned different ways to write out split files. * tb/commit-graph-split-strategy: Revert "commit-graph.c: introduce '--[no-]check-oids'" commit-graph.c: introduce '--[no-]check-oids' commit-graph.h: replace 'commit_hex' with 'commits' oidset: introduce 'oidset_size' builtin/commit-graph.c: introduce split strategy 'replace' builtin/commit-graph.c: introduce split strategy 'no-merge' builtin/commit-graph.c: support for '--split[=<strategy>]' t/helper/test-read-graph.c: support commit-graph chains
2020-04-29commit-graph.c: make 'commit-graph-chain's read-onlyLibravatar Taylor Blau1-0/+2
In a previous commit, we made incremental graph layers read-only by using 'git_mkstemp_mode' with permissions '0444'. There is no reason that 'commit-graph-chain's should be modifiable by the user, since they are generated at a temporary location and then atomically renamed into place. To ensure that these files are read-only, too, use 'hold_lock_file_for_update_mode' with the same read-only permission bits, and let the umask and 'adjust_shared_perm' take care of the rest. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-29commit-graph.c: ensure graph layers respect core.sharedRepositoryLibravatar Taylor Blau1-0/+22
Non-layered commit-graphs use 'adjust_shared_perm' to make the commit-graph file readable (or not) to a combination of the user, group, and others. Call 'adjust_shared_perm' for split-graph layers to make sure that these also respect 'core.sharedRepository'. The 'commit-graph-chain' file already respects this configuration since it uses 'hold_lock_file_for_update' (which calls 'adjust_shared_perm' eventually in 'create_tempfile_mode'). Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-28Merge branch 'ds/commit-graph-expiry-fix'Libravatar Junio C Hamano1-1/+7
"git commit-graph write --expire-time=<timestamp>" did not use the given timestamp correctly, which has been corrected. * ds/commit-graph-expiry-fix: commit-graph: fix buggy --expire-time option
2020-04-23commit-graph.c: gracefully handle file descriptor exhaustionLibravatar Taylor Blau1-0/+13
When writing a layered commit-graph, the commit-graph machinery uses 'commit_graph_filenames_after' and 'commit_graph_hash_after' to keep track of the layers in the chain that we are in the process of writing. When the number of commit-graph layers shrinks, we initialize all entries in the aforementioned arrays, because we know the structure of the new commit-graph chain immediately (since there are no new layers, there are no unknown hash values). But when the number of commit-graph layers grows (i.e., that 'num_commit_graphs_after > num_commit_graphs_before'), then we leave some entries in the filenames and hashes arrays as uninitialized, because we will fill them in later as those values become available. For instance, we rely on 'write_commit_graph_file's to store the filename and hash of the last layer in the new chain, which is the one that it is responsible for writing. But, it's possible that 'write_commit_graph_file' may fail, e.g., from file descriptor exhaustion. In this case it is possible that 'git_mkstemp_mode' will fail, and that function will return early *before* setting the values for the last commit-graph layer's filename and hash. This causes a number of upleasant side-effects. For instance, trying to 'free()' each entry in 'ctx->commit_graph_filenames_after' (and similarly for the hashes array) causes us to 'free()' uninitialized memory, since the area is allocated with 'malloc()' and is therefore subject to contain garbage (which is left alone when 'write_commit_graph_file' returns early). This can manifest in other issues, like a general protection fault, and/or leaving a stray 'commit-graph-chain.lock' around after the process dies. (The reasoning for this is still a mystery to me, since we'd otherwise usually expect the kernel to run tempfile.c's 'atexit()' handlers in the case of a normal death...) To resolve this, initialize the memory with 'CALLOC_ARRAY' so that uninitialized entries are filled with zeros, and can thus be 'free()'d as a noop instead of causing a fault. Helped-by: Jeff King <peff@peff.net> Helped-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-15builtin/commit-graph.c: introduce split strategy 'replace'Libravatar Taylor Blau1-0/+19
When using split commit-graphs, it is sometimes useful to completely replace the commit-graph chain with a new base. For example, consider a scenario in which a repository builds a new commit-graph incremental for each push. Occasionally (say, after some fixed number of pushes), they may wish to rebuild the commit-graph chain with all reachable commits. They can do so with $ git commit-graph write --reachable but this removes the chain entirely and replaces it with a single commit-graph in 'objects/info/commit-graph'. Unfortunately, this means that the next push will have to move this commit-graph into the first layer of a new chain, and then write its new commits on top. Avoid such copying entirely by allowing the caller to specify that they wish to replace the entirety of their commit-graph chain, while also specifying that the new commit-graph should become the basis of a fresh, length-one chain. This addresses the above situation by making it possible for the caller to instead write: $ git commit-graph write --reachable --split=replace which writes a new length-one chain to 'objects/info/commit-graphs', making the commit-graph incremental generated by the subsequent push relatively cheap by avoiding the aforementioned copy. In order to do this, remove an assumption in 'write_commit_graph_file' that chains are always at least two incrementals long. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-15builtin/commit-graph.c: introduce split strategy 'no-merge'Libravatar Taylor Blau1-0/+11
In the previous commit, we laid the groundwork for supporting different splitting strategies. In this commit, we introduce the first splitting strategy: 'no-merge'. Passing '--split=no-merge' is useful for callers which wish to write a new incremental commit-graph, but do not want to spend effort condensing the incremental chain [1]. Previously, this was possible by passing '--size-multiple=0', but this no longer the case following 63020f175f (commit-graph: prefer default size_mult when given zero, 2020-01-02). When '--split=no-merge' is given, the commit-graph machinery will never condense an existing chain, and it will always write a new incremental. [1]: This might occur when, for example, a server administrator running some program after each push may want to ensure that each job runs proportional in time to the size of the push, and does not "jump" when the commit-graph machinery decides to trigger a merge. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flagLibravatar Garima Singh1-0/+1
Add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag to the test setup suite in order to toggle writing Bloom filters when running any of the git tests. If set to true, we will compute and write Bloom filters every time a test calls `git commit-graph write`, as if the `--changed-paths` option was passed in. The test suite passes when GIT_TEST_COMMIT_GRAPH and GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS are enabled. Helped-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-01commit-graph: fix buggy --expire-time optionLibravatar Derrick Stolee1-1/+7
The commit-graph builtin has an --expire-time option that takes a datetime using OPT_EXPIRY_DATE(). However, the implementation inside expire_commit_graphs() was treating a non-zero value as a number of seconds to subtract from "now". Update t5323-split-commit-graph.sh to demonstrate the correct value of the --expire-time option by actually creating a crud .graph file with mtime earlier than the expire time. Instead of using a super- early time (1980) we use an explicit, and recent, time. Using test-tool chmtime to create two files on either end of an exact second, we create a test that catches this failure no matter the current time. Using a fixed date is more portable than trying to format a relative date string into the --expiry-date input. I noticed this when inspecting some Scalar repos that had an excess number of commit-graph files. In Scalar, we were using this second interpretation by using "--expire-time=3600" to mean "delete graphs older than one hour ago" to avoid deleting a commit-graph that a foreground process may be trying to load. Also I noticed that the help text was copied from the --max-commits option. Fix that help text. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-15t5324: make hash size independentLibravatar brian m. carlson1-3/+10
There are some offsets in the commit graph files used to corrupt data. Compute these offsets for both SHA-1 and SHA-256 so that the test works with either. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-13test-tool: use 'read-graph' helperLibravatar Derrick Stolee1-1/+1
The 'git commit-graph read' subcommand is used in test scripts to check that the commit-graph contents match the expected data. Mostly, this helps check the header information and the list of chunks. Users do not need this information, so move the functionality to a test helper. Reported-by: Bryan Turner <bturner@atlassian.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-18commit-graph: add --[no-]progress to write and verifyLibravatar Garima Singh1-1/+1
Add --[no-]progress to git commit-graph write and verify. The progress feature was introduced in 7b0f229 ("commit-graph write: add progress output", 2018-09-17) but the ability to opt-out was overlooked. Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-09Merge branch 'ds/feature-macros'Libravatar Junio C Hamano1-0/+2
A mechanism to affect the default setting for a (related) group of configuration variables is introduced. * ds/feature-macros: repo-settings: create feature.experimental setting repo-settings: create feature.manyFiles setting repo-settings: parse core.untrackedCache commit-graph: turn on commit-graph by default t6501: use 'git gc' in quiet mode repo-settings: consolidate some config settings
2019-08-13commit-graph: turn on commit-graph by defaultLibravatar Derrick Stolee1-0/+2
The commit-graph feature has seen a lot of activity in the past year or so since it was introduced. The feature is a critical performance enhancement for medium- to large-sized repos, and does not significantly hurt small repos. Change the defaults for core.commitGraph and gc.writeCommitGraph to true so users benefit from this feature by default. There are several places in the test suite where the environment variable GIT_TEST_COMMIT_GRAPH is disabled to avoid reading a commit-graph, if it exists. The config option overrides the environment, so swap these. Some GIT_TEST_COMMIT_GRAPH assignments remain, and those are to avoid writing a commit-graph when a new commit is created. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05commit-graph: fix bug around octopus mergesLibravatar Derrick Stolee1-1/+3
In 1771be90 "commit-graph: merge commit-graph chains" (2019-06-18), the method sort_and_scan_merged_commits() was added to merge the commit lists of two commit-graph files in the incremental format. Unfortunately, there was an off-by-one error in that method around incrementing num_extra_edges, which leads to an incorrect offset for the base graph chunk. When we store an octopus merge in the commit-graph file, we store the first parent in the normal place, but use the second parent position to point into the "extra edges" chunk where the remaining parents exist. This means we should be adding "num_parents - 1" edges to this list, not "num_parents - 2". That is the basic error. The reason this was not caught in the test suite is more subtle. In 5324-split-commit-graph.sh, we test creating an octopus merge and adding it to the tip of a commit-graph chain, then verify the result. This _should_ have caught the problem, except that when we load the commit-graph files we were overly careful to not fail when the commit-graph chain does not match. This care was on purpose to avoid race conditions as one process reads the chain and another process modifies it. In such a case, the reading process outputs the following message to stderr: warning: commit-graph chain does not match These warnings are output in the test suite, but ignored. By checking the stderr of `git commit-graph verify` to include the expected progress output, it will now catch this error. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: test verify across alternatesLibravatar Derrick Stolee1-0/+19
The 'git commit-graph verify' subcommand loads a commit-graph from a given object directory instead of using the standard method prepare_commit_graph(). During development of load_commit_graph_chain(), a version did not include prepare_alt_odb() as it was previously run by prepare_commit_graph() in most cases. Add a test that prevents that mistake from happening again. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: normalize commit-graph filenamesLibravatar Derrick Stolee1-1/+6
When writing commit-graph files, we append path data to an object directory, which may be specified by the user via the '--object-dir' option. If the user supplies a trailing slash, or some other alternative path format, the resulting path may be usable for writing to the correct location. However, when expiring graph files from the <obj-dir>/info/commit-graphs directory during a write, we need to compare paths with exact string matches. Normalize the commit-graph filenames to avoid ambiguity. This creates extra allocations, but this is a constant multiple of the number of commit-graph files, which should be a number in the single digits. Further normalize the object directory in the context. Due to a comparison between g->obj_dir and ctx->obj_dir in split_graph_merge_strategy(), a trailing slash would prevent any merging of layers within the same object directory. The check is there to ensure we do not merge across alternates. Update the tests to include a case with this trailing slash problem. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: test --split across alternate without --splitLibravatar Derrick Stolee1-0/+15
We allow sharing commit-graph files across alternates. When we are writing a split commit-graph, we allow adding tip graph files that are not in the alternate, but include commits from our local repo. However, if our alternate is not using the split commit-graph format, its file is at .git/objects/info/commit-graph and we are trying to write files in .git/objects/info/commit-graphs/graph-{hash}.graph. We already have logic to ensure we do not merge across alternate boundaries, but we also cannot have a commit-graph chain to our alternate if uses the old filename structure. Create a test that verifies we create a new split commit-graph with only one level and we do not modify the existing commit-graph in the alternate. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: test octopus merges with --splitLibravatar Derrick Stolee1-0/+11
Octopus merges require an extra chunk of data in the commit-graph file format. Create a test that ensures the new --split option continues to work with an octopus merge. Specifically, ensure that the octopus merge has parents across layers to truly check that our graph position logic holds up correctly. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: clean up chains after flattened writeLibravatar Derrick Stolee1-0/+12
If we write a commit-graph file without the split option, then we write to $OBJDIR/info/commit-graph and start to ignore the chains in $OBJDIR/info/commit-graphs/. Unlink the commit-graph-chain file and expire the graph-{hash}.graph files in $OBJDIR/info/commit-graphs/ during every write. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: verify chains with --shallow modeLibravatar Derrick Stolee1-0/+62
If we wrote a commit-graph chain, we only modified the tip file in the chain. It is valuable to verify what we wrote, but not waste time checking files we did not write. Add a '--shallow' option to the 'git commit-graph verify' subcommand and check that it does not read the base graph in a two-file chain. Making the verify subcommand read from a chain of commit-graphs takes some rearranging of the builtin code. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: create options for split filesLibravatar Derrick Stolee1-0/+47
The split commit-graph feature is now fully implemented, but needs some more run-time configurability. Allow direct callers to 'git commit-graph write --split' to specify the values used in the merge strategy and the expire time. Update the documentation to specify these values. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: expire commit-graph filesLibravatar Derrick Stolee1-1/+1
As we merge commit-graph files in a commit-graph chain, we should clean up the files that are no longer used. This change introduces an 'expiry_window' value to the context, which is always zero (for now). We then check the modified time of each graph-{hash}.graph file in the $OBJDIR/info/commit-graphs folder and unlink the files that are older than the expiry_window. Since this is always zero, this immediately clears all unused graph files. We will update the value to match a config setting in a future change. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: allow cross-alternate chainsLibravatar Derrick Stolee1-0/+37
In an environment like a fork network, it is helpful to have a commit-graph chain that spans both the base repo and the fork repo. The fork is usually a small set of data on top of the large repo, but sometimes the fork is much larger. For example, git-for-windows/git has almost double the number of commits as git/git because it rebases its commits on every major version update. To allow cross-alternate commit-graph chains, we need a few pieces: 1. When looking for a graph-{hash}.graph file, check all alternates. 2. When merging commit-graph chains, do not merge across alternates. 3. When writing a new commit-graph chain based on a commit-graph file in another object directory, do not allow success if the base file has of the name "commit-graph" instead of "commit-graphs/graph-{hash}.graph". Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: merge commit-graph chainsLibravatar Derrick Stolee1-0/+13
When searching for a commit in a commit-graph chain of G graphs with N commits, the search takes O(G log N) time. If we always add a new tip graph with every write, the linear G term will start to dominate and slow the lookup process. To keep lookups fast, but also keep most incremental writes fast, create a strategy for merging levels of the commit-graph chain. The strategy is detailed in the commit-graph design document, but is summarized by these two conditions: 1. If the number of commits we are adding is more than half the number of commits in the graph below, then merge with that graph. 2. If we are writing more than 64,000 commits into a single graph, then merge with all lower graphs. The numeric values in the conditions above are currently constant, but can become config options in a future update. As we merge levels of the commit-graph chain, check that the commits still exist in the repository. A garbage-collection operation may have removed those commits from the object store and we do not want to persist them in the commit-graph chain. This is a non-issue if the 'git gc' process wrote a new, single-level commit-graph file. After we merge levels, the old graph-{hash}.graph files are no longer referenced by the commit-graph-chain file. We will expire these files in a future change. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-19commit-graph: add --split option to builtinLibravatar Derrick Stolee1-0/+122
Add a new "--split" option to the 'git commit-graph write' subcommand. This option allows the optional behavior of writing a commit-graph chain. The current behavior will add a tip commit-graph containing any commits that are not in the existing commit-graph or commit-graph chain. Later changes will allow merging the chain and expiring out-dated files. Add a new test script (t5324-split-commit-graph.sh) that demonstrates this behavior. Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>