| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git commit-graph write" learned to limit the number of bloom
filters that are computed from scratch with the --max-new-filters
option.
* tb/bloom-improvements:
commit-graph: introduce 'commitGraph.maxNewFilters'
builtin/commit-graph.c: introduce '--max-new-filters=<n>'
commit-graph: rename 'split_commit_graph_opts'
bloom: encode out-of-bounds filters as non-empty
bloom/diff: properly short-circuit on max_changes
bloom: use provided 'struct bloom_filter_settings'
bloom: split 'get_bloom_filter()' in two
commit-graph.c: store maximum changed paths
commit-graph: respect 'commitGraph.readChangedPaths'
t/helper/test-read-graph.c: prepare repo settings
commit-graph: pass a 'struct repository *' in more places
t4216: use an '&&'-chain
commit-graph: introduce 'get_bloom_filter_settings()'
|
|
Many places in the code often need a pointer to the commit-graph's
'struct bloom_filter_settings', in which case they often take the value
from the top-most commit-graph.
In the non-split case, this works as expected. In the split case,
however, things get a little tricky. Not all layers in a chain of
incremental commit-graphs are required to themselves have Bloom data,
and so whether or not some part of the code uses Bloom filters depends
entirely on whether or not the top-most level of the commit-graph chain
has Bloom filters.
This has been the behavior since Bloom filters were introduced, and has
been codified into the tests since a759bfa9ee (t4216: add end to end
tests for git log with Bloom filters, 2020-04-06). In fact, t4216.130
requires that Bloom filters are not used in exactly the case described
earlier.
There is no reason that this needs to be the case, since it is perfectly
valid for commits in an earlier layer to have Bloom filters when commits
in a newer layer do not.
Since Bloom settings are guaranteed in practice to be the same for any
layer in a chain that has Bloom data, it is sufficient to traverse the
'->base_graph' pointer until either (1) a non-null 'struct
bloom_filter_settings *' is found, or (2) until we are at the root of
the commit-graph chain.
Introduce a 'get_bloom_filter_settings()' function that does just this,
and use it instead of purely dereferencing the top-most graph's
'->bloom_filter_settings' pointer.
While we're at it, add an additional test in t5324 to guard against code
in the commit-graph writing machinery that doesn't correctly handle a
NULL 'struct bloom_filter *'.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph format reserved a byte among the header of the file to
store a "hash version". During the SHA-256 work, this was not modified
because file formats are not necessarily intended to work across hash
versions. If a repository has SHA-256 as its hash algorithm, it
automatically up-shifts the lengths of object names in all necessary
formats.
However, since we have this byte available for adjusting the version, we
can make the file formats more obviously incompatible instead of relying
on other context from the repository.
Update the oid_version() method in commit-graph.c to add a new value, 2,
for sha-256. This automatically writes the new value in a SHA-256
repository _and_ verifies the value is correct. This is a breaking
change relative to the current 'master' branch since 092b677 (Merge
branch 'bc/sha-256-cvs-svn-updates', 2020-08-13) but it is not breaking
relative to any released version of Git.
The test impact is relatively minor: the output of 'test-tool
read-graph' lists the header information, so those instances of '1' need
to be replaced with a variable determined by GIT_TEST_DEFAULT_HASH. A
more careful test is added that specifically creates a repository of
each type then swaps the commit-graph files. The important value here is
that the "git log" command succeeds while writing a message to stderr.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
|
|
Now that we call test_oid_init in the setup for all test scripts,
there's no point in calling it individually. Remove all of the places
where we've done so to help keep tests tidy.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the future, we plan on only allowing `test_might_fail` to work on a
restricted subset of commands, including `git`. Reorder the commands so
that `run_with_limited_open_files` comes before `test_might_fail`. This
way, `test_might_fail` operates on a git command.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of the files commit-graph subsystem keeps on disk did not
correctly honor the core.sharedRepository settings and some were
left read-write.
* tb/commit-graph-perm-bits:
commit-graph.c: make 'commit-graph-chain's read-only
commit-graph.c: ensure graph layers respect core.sharedRepository
commit-graph.c: write non-split graphs as read-only
lockfile.c: introduce 'hold_lock_file_for_update_mode'
tempfile.c: introduce 'create_tempfile_mode'
|
|
Introduce an extension to the commit-graph to make it efficient to
check for the paths that were modified at each commit using Bloom
filters.
* gs/commit-graph-path-filter:
bloom: ignore renames when computing changed paths
commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag
t4216: add end to end tests for git log with Bloom filters
revision.c: add trace2 stats around Bloom filter usage
revision.c: use Bloom filters to speed up path based revision walks
commit-graph: add --changed-paths option to write subcommand
commit-graph: reuse existing Bloom filters during write
commit-graph: write Bloom filters to commit graph file
commit-graph: examine commits by generation number
commit-graph: examine changed-path objects in pack order
commit-graph: compute Bloom filters for changed paths
diff: halt tree-diff early after max_changes
bloom.c: core Bloom filter implementation for changed paths.
bloom.c: introduce core Bloom filter constructs
bloom.c: add the murmur3 hash implementation
commit-graph: define and use MAX_NUM_CHUNKS
|
|
The commit-graph code exhausted file descriptors easily when it
does not have to.
* tb/commit-graph-fd-exhaustion-fix:
commit-graph: close descriptors after mmap
commit-graph.c: gracefully handle file descriptor exhaustion
t/test-lib.sh: make ULIMIT_FILE_DESCRIPTORS available to tests
commit-graph.c: don't use discarded graph_name in error
|
|
"git commit-graph write" learned different ways to write out split
files.
* tb/commit-graph-split-strategy:
Revert "commit-graph.c: introduce '--[no-]check-oids'"
commit-graph.c: introduce '--[no-]check-oids'
commit-graph.h: replace 'commit_hex' with 'commits'
oidset: introduce 'oidset_size'
builtin/commit-graph.c: introduce split strategy 'replace'
builtin/commit-graph.c: introduce split strategy 'no-merge'
builtin/commit-graph.c: support for '--split[=<strategy>]'
t/helper/test-read-graph.c: support commit-graph chains
|
|
In a previous commit, we made incremental graph layers read-only by
using 'git_mkstemp_mode' with permissions '0444'.
There is no reason that 'commit-graph-chain's should be modifiable by
the user, since they are generated at a temporary location and then
atomically renamed into place.
To ensure that these files are read-only, too, use
'hold_lock_file_for_update_mode' with the same read-only permission
bits, and let the umask and 'adjust_shared_perm' take care of the rest.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Non-layered commit-graphs use 'adjust_shared_perm' to make the
commit-graph file readable (or not) to a combination of the user, group,
and others.
Call 'adjust_shared_perm' for split-graph layers to make sure that these
also respect 'core.sharedRepository'. The 'commit-graph-chain' file
already respects this configuration since it uses
'hold_lock_file_for_update' (which calls 'adjust_shared_perm' eventually
in 'create_tempfile_mode').
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit-graph write --expire-time=<timestamp>" did not use the
given timestamp correctly, which has been corrected.
* ds/commit-graph-expiry-fix:
commit-graph: fix buggy --expire-time option
|
|
When writing a layered commit-graph, the commit-graph machinery uses
'commit_graph_filenames_after' and 'commit_graph_hash_after' to keep
track of the layers in the chain that we are in the process of writing.
When the number of commit-graph layers shrinks, we initialize all
entries in the aforementioned arrays, because we know the structure of
the new commit-graph chain immediately (since there are no new layers,
there are no unknown hash values).
But when the number of commit-graph layers grows (i.e., that
'num_commit_graphs_after > num_commit_graphs_before'), then we leave
some entries in the filenames and hashes arrays as uninitialized,
because we will fill them in later as those values become available.
For instance, we rely on 'write_commit_graph_file's to store the
filename and hash of the last layer in the new chain, which is the one
that it is responsible for writing. But, it's possible that
'write_commit_graph_file' may fail, e.g., from file descriptor
exhaustion. In this case it is possible that 'git_mkstemp_mode' will
fail, and that function will return early *before* setting the values
for the last commit-graph layer's filename and hash.
This causes a number of upleasant side-effects. For instance, trying to
'free()' each entry in 'ctx->commit_graph_filenames_after' (and
similarly for the hashes array) causes us to 'free()' uninitialized
memory, since the area is allocated with 'malloc()' and is therefore
subject to contain garbage (which is left alone when
'write_commit_graph_file' returns early).
This can manifest in other issues, like a general protection fault,
and/or leaving a stray 'commit-graph-chain.lock' around after the
process dies. (The reasoning for this is still a mystery to me, since
we'd otherwise usually expect the kernel to run tempfile.c's 'atexit()'
handlers in the case of a normal death...)
To resolve this, initialize the memory with 'CALLOC_ARRAY' so that
uninitialized entries are filled with zeros, and can thus be 'free()'d
as a noop instead of causing a fault.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous commit, we laid the groundwork for supporting different
splitting strategies. In this commit, we introduce the first splitting
strategy: 'no-merge'.
Passing '--split=no-merge' is useful for callers which wish to write a
new incremental commit-graph, but do not want to spend effort condensing
the incremental chain [1]. Previously, this was possible by passing
'--size-multiple=0', but this no longer the case following 63020f175f
(commit-graph: prefer default size_mult when given zero, 2020-01-02).
When '--split=no-merge' is given, the commit-graph machinery will never
condense an existing chain, and it will always write a new incremental.
[1]: This might occur when, for example, a server administrator running
some program after each push may want to ensure that each job runs
proportional in time to the size of the push, and does not "jump" when
the commit-graph machinery decides to trigger a merge.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag to the test setup suite
in order to toggle writing Bloom filters when running any of the git tests.
If set to true, we will compute and write Bloom filters every time a test
calls `git commit-graph write`, as if the `--changed-paths` option was
passed in.
The test suite passes when GIT_TEST_COMMIT_GRAPH and
GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS are enabled.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph builtin has an --expire-time option that takes a
datetime using OPT_EXPIRY_DATE(). However, the implementation inside
expire_commit_graphs() was treating a non-zero value as a number of
seconds to subtract from "now".
Update t5323-split-commit-graph.sh to demonstrate the correct value
of the --expire-time option by actually creating a crud .graph file
with mtime earlier than the expire time. Instead of using a super-
early time (1980) we use an explicit, and recent, time. Using
test-tool chmtime to create two files on either end of an exact
second, we create a test that catches this failure no matter the
current time. Using a fixed date is more portable than trying to
format a relative date string into the --expiry-date input.
I noticed this when inspecting some Scalar repos that had an excess
number of commit-graph files. In Scalar, we were using this second
interpretation by using "--expire-time=3600" to mean "delete graphs
older than one hour ago" to avoid deleting a commit-graph that a
foreground process may be trying to load.
Also I noticed that the help text was copied from the --max-commits
option. Fix that help text.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are some offsets in the commit graph files used to corrupt data.
Compute these offsets for both SHA-1 and SHA-256 so that the test works
with either.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --[no-]progress to git commit-graph write and verify.
The progress feature was introduced in 7b0f229
("commit-graph write: add progress output", 2018-09-17) but
the ability to opt-out was overlooked.
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
|
|
The commit-graph feature has seen a lot of activity in the past
year or so since it was introduced. The feature is a critical
performance enhancement for medium- to large-sized repos, and
does not significantly hurt small repos.
Change the defaults for core.commitGraph and gc.writeCommitGraph
to true so users benefit from this feature by default.
There are several places in the test suite where the environment
variable GIT_TEST_COMMIT_GRAPH is disabled to avoid reading a
commit-graph, if it exists. The config option overrides the
environment, so swap these. Some GIT_TEST_COMMIT_GRAPH assignments
remain, and those are to avoid writing a commit-graph when a new
commit is created.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 1771be90 "commit-graph: merge commit-graph chains" (2019-06-18),
the method sort_and_scan_merged_commits() was added to merge the
commit lists of two commit-graph files in the incremental format.
Unfortunately, there was an off-by-one error in that method around
incrementing num_extra_edges, which leads to an incorrect offset
for the base graph chunk.
When we store an octopus merge in the commit-graph file, we store
the first parent in the normal place, but use the second parent
position to point into the "extra edges" chunk where the remaining
parents exist. This means we should be adding "num_parents - 1"
edges to this list, not "num_parents - 2". That is the basic error.
The reason this was not caught in the test suite is more subtle.
In 5324-split-commit-graph.sh, we test creating an octopus merge
and adding it to the tip of a commit-graph chain, then verify the
result. This _should_ have caught the problem, except that when
we load the commit-graph files we were overly careful to not fail
when the commit-graph chain does not match. This care was on
purpose to avoid race conditions as one process reads the chain
and another process modifies it. In such a case, the reading
process outputs the following message to stderr:
warning: commit-graph chain does not match
These warnings are output in the test suite, but ignored. By
checking the stderr of `git commit-graph verify` to include
the expected progress output, it will now catch this error.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git commit-graph verify' subcommand loads a commit-graph from
a given object directory instead of using the standard method
prepare_commit_graph(). During development of load_commit_graph_chain(),
a version did not include prepare_alt_odb() as it was previously
run by prepare_commit_graph() in most cases.
Add a test that prevents that mistake from happening again.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing commit-graph files, we append path data to an
object directory, which may be specified by the user via the
'--object-dir' option. If the user supplies a trailing slash,
or some other alternative path format, the resulting path may
be usable for writing to the correct location. However, when
expiring graph files from the <obj-dir>/info/commit-graphs
directory during a write, we need to compare paths with exact
string matches.
Normalize the commit-graph filenames to avoid ambiguity. This
creates extra allocations, but this is a constant multiple of
the number of commit-graph files, which should be a number in
the single digits.
Further normalize the object directory in the context. Due to
a comparison between g->obj_dir and ctx->obj_dir in
split_graph_merge_strategy(), a trailing slash would prevent
any merging of layers within the same object directory. The
check is there to ensure we do not merge across alternates.
Update the tests to include a case with this trailing slash
problem.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We allow sharing commit-graph files across alternates. When we are
writing a split commit-graph, we allow adding tip graph files that
are not in the alternate, but include commits from our local repo.
However, if our alternate is not using the split commit-graph format,
its file is at .git/objects/info/commit-graph and we are trying to
write files in .git/objects/info/commit-graphs/graph-{hash}.graph.
We already have logic to ensure we do not merge across alternate
boundaries, but we also cannot have a commit-graph chain to our
alternate if uses the old filename structure.
Create a test that verifies we create a new split commit-graph
with only one level and we do not modify the existing commit-graph
in the alternate.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Octopus merges require an extra chunk of data in the commit-graph
file format. Create a test that ensures the new --split option
continues to work with an octopus merge. Specifically, ensure
that the octopus merge has parents across layers to truly check
that our graph position logic holds up correctly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we write a commit-graph file without the split option, then
we write to $OBJDIR/info/commit-graph and start to ignore
the chains in $OBJDIR/info/commit-graphs/.
Unlink the commit-graph-chain file and expire the graph-{hash}.graph
files in $OBJDIR/info/commit-graphs/ during every write.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we wrote a commit-graph chain, we only modified the tip file in
the chain. It is valuable to verify what we wrote, but not waste
time checking files we did not write.
Add a '--shallow' option to the 'git commit-graph verify' subcommand
and check that it does not read the base graph in a two-file chain.
Making the verify subcommand read from a chain of commit-graphs takes
some rearranging of the builtin code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The split commit-graph feature is now fully implemented, but needs
some more run-time configurability. Allow direct callers to 'git
commit-graph write --split' to specify the values used in the
merge strategy and the expire time.
Update the documentation to specify these values.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we merge commit-graph files in a commit-graph chain, we should clean
up the files that are no longer used.
This change introduces an 'expiry_window' value to the context, which is
always zero (for now). We then check the modified time of each
graph-{hash}.graph file in the $OBJDIR/info/commit-graphs folder and
unlink the files that are older than the expiry_window.
Since this is always zero, this immediately clears all unused graph
files. We will update the value to match a config setting in a future
change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an environment like a fork network, it is helpful to have a
commit-graph chain that spans both the base repo and the fork repo. The
fork is usually a small set of data on top of the large repo, but
sometimes the fork is much larger. For example, git-for-windows/git has
almost double the number of commits as git/git because it rebases its
commits on every major version update.
To allow cross-alternate commit-graph chains, we need a few pieces:
1. When looking for a graph-{hash}.graph file, check all alternates.
2. When merging commit-graph chains, do not merge across alternates.
3. When writing a new commit-graph chain based on a commit-graph file
in another object directory, do not allow success if the base file
has of the name "commit-graph" instead of
"commit-graphs/graph-{hash}.graph".
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new "--split" option to the 'git commit-graph write' subcommand. This
option allows the optional behavior of writing a commit-graph chain.
The current behavior will add a tip commit-graph containing any commits that
are not in the existing commit-graph or commit-graph chain. Later changes
will allow merging the chain and expiring out-dated files.
Add a new test script (t5324-split-commit-graph.sh) that demonstrates this
behavior.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Taylor Blau
Derrick Stolee
brian m. carlson
Denton Liu
Garima Singh