| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change an invocation of zipinfo added in 19ee29401d (t5004: test ZIP
archives with many entries, 2015-08-22) to simply ask zipinfo for the
header info, rather than spewing out info about the entire archive and
race to kill it with SIGPIPE due to the downstream "head -2".
I ran across this because I'm adding a "set -o pipefail" test
mode. This won't be needed for the version of the mode that I'm
introducing (which currently relies on a patch to GNU bash), but I
think this is a good idea anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we're confident our pax extended header calculation is correct,
turn the criticality of the assertion up to the maximum, from warning
right up to BUG. Simplify the test, as the stderr comparison step would
not be reached in case the BUG message is triggered.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A pax extended header record starts with a decimal number. Its value
is the length of the whole record, including its own length.
The calculation of that number in strbuf_append_ext_header() is off by
one in case the length of the rest is close to a higher order of
magnitude. This affects paths and link targets a bit shorter than 1000,
10000, 100000 etc. characters -- paths with a length of up to 100 fit
into the tar header and don't need a pax extended header.
The mistake has been present since the function was added by ae64bbc18c
("tar-tree: Introduce write_entry()", 2006-03-25).
Account for digits added to len during the loop and keep incrementing
until we have enough space for len and the rest. The crucial change is
to check against the current value of len before each iteration, instead
of against its value before the loop.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extended header entries contain a length value that is a bit tricky to
calculate because it includes its own length (number of decimal digits)
as well. We get it wrong in corner cases. Add a check, report wrong
results as a warning and add a test for exercising it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ea2d20d4c2 ("t5004: avoid using tar for checking emptiness of archive",
2013-05-09), introduced a fake empty tar archive to allow for portable
tests of emptiness without having to invoke tar
4318094047 ("archive: don't add empty directories to archives", 2017-09-13)
changed the expected result for its tests from one containing an empty
directory to a plain empty archive but the portable test wasn't updated
resulting on them failing again in (at least) NetBSD and OpenBSD
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While git doesn't track empty directories, git archive can be tricked
into putting some into archives. One way is to construct an empty tree
object, as t5004 does. While that is supported by the object database,
it can't be represented in the index and thus it's unlikely to occur in
the wild.
Another way is using the literal name of a directory in an exclude
pathspec -- its contents are are excluded, but the directory stub is
included. That's inconsistent: exclude pathspecs containing wildcards
don't leave empty directories in the archive.
Yet another way is have a few levels of nested subdirectories (e.g.
d1/d2/d3/file1) and ignoring the entries at the leaves (e.g. file1).
The directories with the ignored content are ignored as well (e.g. d3),
but their empty parents are included (e.g. d2).
As empty directories are not supported by git, they should also not be
written into archives. If an empty directory is really needed then it
can be tracked and archived by placing an empty .gitignore file in it.
There already is a mechanism in place for suppressing empty directories.
When read_tree_recursive() encounters a directory excluded by a pathspec
then it enters it anyway because it might contain included entries. It
calls the callback function before it is able to decide if the directory
is actually needed. For that reason git archive adds directories to a
queue and writes entries for them only when it encounters the first
child item -- but currently only if pathspecs with wildcards are used.
Queue *all* directories, no matter if there even are pathspecs present.
This prevents git archive from writing entries for empty directories in
all cases.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check if unzip supports the ZIP64 format and skip the tests that create
big archives otherwise. Also skip the test that archives a big file on
32-bit platforms because the git object systems can't unpack files
bigger than 4GB there.
Reported-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Write a zip64 extended information extra field for big files as part of
their local headers and as part of their central directory headers.
Also write a zip64 version of the data descriptor in that case.
If we're streaming then we don't know the compressed size at the time we
write the header. Deflate can end up making a file bigger instead of
smaller if we're unlucky. Write a local zip64 header already for files
with a size of 2GB or more in this case to be on the safe side.
Both sizes need to be included in the local zip64 header, but the extra
field for the directory must only contain 64-bit equivalents for 32-bit
values of 0xffffffff.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a zip64 extended information extra field to the central directory
and emit the zip64 end of central directory records as well as locator
if the offset of an entry within the archive exceeds 4GB.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test the creation of ZIP archives bigger than 4GB and containing files
bigger than 4GB. They are marked as EXPENSIVE because they take quite a
while and because the first one needs a bit more than 4GB of disk space
to store the resulting archive.
The big archive in the first test is made up of a tree containing
thousands of copies of a small file. Yet the test has to write out the
full archive because unzip doesn't offer a way to read from stdin.
The big file in the second test is provided as a zipped pack file to
avoid writing another 4GB file to disk and then adding it.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support more than 65535 entries cleanly by writing a "zip64 end of
central directory record" (with a 64-bit field for the number of
entries) before the usual "end of central directory record" (which
contains only a 16-bit field). InfoZIP's zip does the same.
Archives with 65535 or less entries are not affected.
Programs that extract all files like InfoZIP's zip and 7-Zip
ignored the field and could extract all files already. Software
that relies on the ZIP file directory to show a list of contained
files quickly to simulate to normal directory like Windows'
built-in ZIP functionality only saw a subset of the included files.
Windows supports ZIP64 since Vista according to
https://en.wikipedia.org/wiki/Zip_%28file_format%29#ZIP64.
Suggested-by: Johannes Schauer <josch@debian.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A ZIP file directory has a 16-bit field for the number of entries it
contains. There are 64-bit extensions to deal with that. Demonstrate
that git archive --format=zip currently doesn't use them and instead
overflows the field.
InfoZIP's unzip doesn't care about this field and extracts all files
anyway. Software that uses the directory for presenting a filesystem
like view quickly -- notably Windows -- depends on it, but doesn't
lend itself to an automatic test case easily. Use InfoZIP's zipinfo,
which probably isn't available everywhere but at least can provides
*some* way to check this field.
To speed things up a bit create and commit only a subset of the files
and build a fake tree out of duplicates and pass that to git archive.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we are expecting a command to produce a particular exit
code, we can use test_expect_code. However, some cases are
more complicated, and want to accept one of a range of exit
codes. For these, we end up with something like:
cmd;
case "$?" in
...
That unfortunately breaks the &&-chain and fools
--chain-lint. Since these special cases are so few, we can
wrap them in a block, like this:
{ cmd; ret=$?; } &&
case "$ret" in
...
This accomplishes the same thing, and retains the &&-chain
(the exit status fed to the && is that of the assignment,
which should always be true). It's technically longer, but
it is probably a good thing for unusual code like this to
stand out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 10f343ea814f5c18a0913997904ee11cd9b7da24, whose
output is no longer bit-for-bit equivalent from the older versions
of Git, which the infrastructure to (pretend to) upload tarballs
kernel.org uses depends on.
|
|
Implementations of "tar" that do not understand an extended pax
header would extract the contents of it in a regular file; make
sure the permission bits of this file follows the same tar.umask
configuration setting.
* bc/archive-pax-header-mode:
archive: honor tar.umask even for pax headers
|
|
git archive's tar format uses extended pax headers to encode metadata
into the archive. Most tar implementations correctly treat these as
metadata, but some that do not understand the pax format extract these
as files instead. Apply the tar.umask setting to these entries to
prevent tampering by other users.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
test_cmp() is primarily meant to compare text files (and display the
difference for debug purposes).
Raw "cmp" is better suited to compare binary files (tar, zip, etc.).
On MinGW, test_cmp is a shell function mingw_test_cmp that tries to
read both files into environment, stripping CR characters (introduced
in commit 4d715ac0).
This function usually speeds things up, as fork is extremly slow on
Windows. But no wonder that this function is extremely slow and
sometimes even crashes when comparing large tar or zip files.
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes tests added in 1.8.2 era that are broken on BSDs.
* rs/empty-archive:
t5004: resurrect original empty tar archive test
t5004: avoid using tar for checking emptiness of archive
|
|
Test 2 of t5004 checks if a supposedly empty tar archive really
contains no files. 24676f02 (t5004: fix issue with empty archive test
and bsdtar) removed our commit hash to make it work with bsdtar, but
the test still fails on NetBSD and OpenBSD, which use their own tar
that considers a tar file containing only NULs as broken.
Here's what the different archivers do when asked to create a tar
file without entries:
$ uname -v
NetBSD 6.0.1 (GENERIC)
$ gtar --version | head -1
tar (GNU tar) 1.26
$ bsdtar --version
bsdtar 2.8.4 - libarchive 2.8.4
$ : >zero.tar
$ perl -e 'print "\0" x 10240' >tenk.tar
$ sha1 zero.tar tenk.tar
SHA1 (zero.tar) = da39a3ee5e6b4b0d3255bfef95601890afd80709
SHA1 (tenk.tar) = 34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
$ : | tar cf - -T - | sha1
da39a3ee5e6b4b0d3255bfef95601890afd80709
$ : | gtar cf - -T - | sha1
34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
$ : | bsdtar cf - -T - | sha1
34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
So NetBSD's native tar creates an empty file, while GNU tar and bsdtar
both give us 10KB of NULs -- just like git archive with an empty tree.
Now let's see how the archivers handle these two kinds of empty tar
files:
$ tar tf zero.tar; echo $?
tar: Unexpected EOF on archive file
1
$ gtar tf zero.tar; echo $?
gtar: This does not look like a tar archive
gtar: Exiting with failure status due to previous errors
2
$ bsdtar tf zero.tar; echo $?
0
$ tar tf tenk.tar; echo $?
tar: Cannot identify format. Searching...
tar: End of archive volume 1 reached
tar: Sorry, unable to determine archive format.
1
$ gtar tf tenk.tar; echo $?
0
$ bsdtar tf tenk.tar; echo $?
0
NetBSD's tar complains about both, bsdtar happily accepts any of them
and GNU tar doesn't like zero-length archive files. So the safest
course of action is to stay with our block-of-NULs format which is
compatible with GNU tar and bsdtar, as we can't make NetBSD's native
tar happy anyway.
We can simplify our test, however, by taking tar out of the picture.
Instead of extracting the archive and checking for the non-presence of
files, check if the file has a size of 10KB and contains only NULs.
This makes t5004 pass on NetBSD and OpenBSD.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test to verify the emptiness of an archive by extracting its
contents. Don't run this test if the version of tar doesn't support
archives containing only a comment header, though.
The existing check 'tar archive of empty tree is empty' used to work
like that (minus the tar capability check) but was changed to depend
on the exact representation of empty tar files created by git archive
instead of on the behaviour of tar in order to avoid issues with
different tar versions.
The different approaches test different things: The existing one is
for empty trees, for which we know the exact expected output and thus
we can simply check it without extracting; the new one is for commits
with empty trees, whose archives include stamps and so the more
"natural" check by extraction is a better fit because it focuses on
the interesting aspect, namely the absence of any archive entries.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test 2 of t5004 checks if a supposedly empty tar archive really
contains no files. 24676f02 (t5004: fix issue with empty archive test
and bsdtar) removed our commit hash to make it work with bsdtar, but
the test still fails on NetBSD and OpenBSD, which use their own tar
that considers a tar file containing only NULs as broken.
Here's what the different archivers do when asked to create a tar
file without entries:
$ uname -v
NetBSD 6.0.1 (GENERIC)
$ gtar --version | head -1
tar (GNU tar) 1.26
$ bsdtar --version
bsdtar 2.8.4 - libarchive 2.8.4
$ : >zero.tar
$ perl -e 'print "\0" x 10240' >tenk.tar
$ sha1 zero.tar tenk.tar
SHA1 (zero.tar) = da39a3ee5e6b4b0d3255bfef95601890afd80709
SHA1 (tenk.tar) = 34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
$ : | tar cf - -T - | sha1
da39a3ee5e6b4b0d3255bfef95601890afd80709
$ : | gtar cf - -T - | sha1
34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
$ : | bsdtar cf - -T - | sha1
34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c
So NetBSD's native tar creates an empty file, while GNU tar and bsdtar
both give us 10KB of NULs -- just like git archive with an empty tree.
Now let's see how the archivers handle these two kinds of empty tar
files:
$ tar tf zero.tar; echo $?
tar: Unexpected EOF on archive file
1
$ gtar tf zero.tar; echo $?
gtar: This does not look like a tar archive
gtar: Exiting with failure status due to previous errors
2
$ bsdtar tf zero.tar; echo $?
0
$ tar tf tenk.tar; echo $?
tar: Cannot identify format. Searching...
tar: End of archive volume 1 reached
tar: Sorry, unable to determine archive format.
$ gtar tf tenk.tar; echo $?
0
$ bsdtar tf tenk.tar; echo $?
0
NetBSD's tar complains about both, bsdtar happily accepts any of them
and GNU tar doesn't like zero-length archive files. So the safest
course of action is to stay with our block-of-NULs format which is
compatible with GNU tar and bsdtar, as we can't make NetBSD's native
tar happy anyway.
We can simplify our test, however, by taking tar out of the picture.
Instead of extracting the archive and checking for the non-presence of
files, check if the file has a size of 10KB and contains only NULs.
This makes t5004 pass on NetBSD and OpenBSD.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Versions of tar that don't know pax headers -- like the ones in NetBSD 6
and OpenBSD 5.2 -- extract them as regular files. Explicitly ignore the
file created for our global header when checking the list of extracted
files, as this is normal and harmless fall-back behaviour. This fixes
test 3 of t5004 on these platforms.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
bsdtar, which is the default tar on Mac OS X, handles empty archives
just fine but reports archives containing only a pax extended header
comment as damaged. Work around the issue by explicitly generating
the archive for the tree and not the commit, which causes git archive
to omit the commit hash comment record from the tar file.
Reported-by: BJ Hargrave <bj@bjhargrave.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-archive relies on get_pathspec to convert its argv into
a list of pathspecs. When get_pathspec is given an empty
argv list, it returns a single pathspec, the empty string,
to indicate that everything matches. When we feed this to
our path_exists function, we typically see that the pathspec
turns up at least one item in the tree, and we are happy.
But when our tree is empty, we erroneously think it is
because the pathspec is too limited, when in fact it is
simply that there is nothing to be found in the tree. This
is a weird corner case, but the correct behavior is almost
certainly to produce an empty archive, not to exit with an
error.
This patch teaches git-archive to create empty archives when
there is no pathspec given (we continue to complain if a
pathspec is given, since it obviously is not matched). It
also confirms that the tar and zip writers produce sane
output in this instance.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Eric Sunshine
Ævar Arnfjörð Bjarmason
René Scharfe
Carlo Marcelo Arenas Belón
Jeff King
Junio C Hamano
brian m. carlson
Stepan Kasal
René Scharfe