summaryrefslogtreecommitdiff
path: root/t/t5000-tar-tree.sh
AgeCommit message (Collapse)AuthorFilesLines
2016-11-22archive: read local configurationLibravatar Junio C Hamano1-3/+32
Since b9605bc4f2 ("config: only read .git/config from configured repos", 2016-09-12), we do not read from ".git/config" unless we know we are in a repository. "git archive" however didn't do the repository discovery and instead relied on the old behaviour. Teach the command to run a "gentle" version of repository discovery so that local configuration variables are honoured. [jc: stole tests from peff] Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15archive-tar: huge offset and future timestamps would not work on 32-bitLibravatar Junio C Hamano1-6/+6
As we are not yet moving everything to size_t but still using ulong internally when talking about the size of object, platforms with 32-bit long will not be able to produce tar archive with 4GB+ file, and cannot grok 077777777777UL as a constant. Disable the extended header feature and do not test it on them. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01archive-tar: write extended headers for far-future mtimeLibravatar Jeff King1-2/+2
The ustar format represents timestamps as seconds since the epoch, but only has room to store 11 octal digits. To express anything larger, we need to use an extended header. This is exactly the same case we fixed for the size field in the previous commit, and the solution here follows the same pattern. This is even mentioned as an issue in f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), but since it only affected things far in the future, it wasn't deemed worth dealing with. But note that my calculations claiming thousands of years were off there; because our xsnprintf produces a NUL byte, we only have until the year 2242 to fix this. Given that this is just around the corner (geologically speaking, anyway), and because it's easy to fix, let's just make it work. Unlike the previous fix for "size", where we had to write an individual extended header for each file, we can write one global header (since we have only one mtime for the whole archive). There's a slight bit of trickiness there. We may already be writing a global header with a "comment" field for the commit sha1. So we need to write our new field into the same header. To do this, we push the decision of whether to write such a header down into write_global_extended_header(), which will now assemble the header as it sees fit, and will return early if we have nothing to write (in practice, we'll only have a large mtime if it comes from a commit, but this makes it also work if you set your system clock ahead such that time() returns a huge value). Note that we don't (and never did) handle negative timestamps (i.e., before 1970). This would probably not be too hard to support in the same way, but since git does not support negative timestamps at all, I didn't bother here. After writing the extended header, we munge the timestamp in the ustar headers to the maximum-allowable size. This is wrong, but it's the least-wrong thing we can provide to a tar implementation that doesn't understand pax headers (it's also what GNU tar does). Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01archive-tar: write extended headers for file sizes >= 8GBLibravatar Jeff King1-2/+2
The ustar format has a fixed-length field for the size of each file entry which is supposed to contain up to 11 bytes of octal-formatted data plus a NUL or space terminator. These means that the largest size we can represent is 077777777777, or 1 byte short of 8GB. The correct solution for a larger file, according to POSIX.1-2001, is to add an extended pax header, similar to how we handle long filenames. This patch does that, and writes zero for the size field in the ustar header (the last bit is not mentioned by POSIX, but it matches how GNU tar behaves with --format=pax). This should be a strict improvement over the current behavior, which is to die in xsnprintf with a "BUG". However, there's some interesting history here. Prior to f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), we silently overflowed the "size" field. The extra bytes ended up in the "mtime" field of the header, which was then immediately written itself, overwriting our extra bytes. What that means depends on how many bytes we wrote. If the size was 64GB or greater, then we actually overflowed digits into the mtime field, meaning our value was effectively right-shifted by those lost octal digits. And this patch is again a strict improvement over that. But if the size was between 8GB and 64GB, then our 12-byte field held all of the actual digits, and only our NUL terminator overflowed. According to POSIX, there should be a NUL or space at the end of the field. However, GNU tar seems to be lenient here, and will correctly parse a size up 64GB (minus one) from the field. So sizes in this range might have just worked, depending on the implementation reading the tarfile. This patch is mostly still an improvement there, as the 8GB limit is specifically mentioned in POSIX as the correct limit. But it's possible that it could be a regression (versus the pre-f2f0267 state) if all of the following are true: 1. You have a file between 8GB and 64GB. 2. Your tar implementation _doesn't_ know about pax extended headers. 3. Your tar implementation _does_ parse 12-byte sizes from the ustar header without a delimiter. It's probably not worth worrying about such an obscure set of conditions, but I'm documenting it here just in case. Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01t5000: test tar files that overflow ustar headersLibravatar Jeff King1-0/+74
The ustar format only has room for 11 (or 12, depending on some implementations) octal digits for the size and mtime of each file. For values larger than this, we have to add pax extended headers to specify the real data, and git does not yet know how to do so. Before fixing that, let's start off with some test infrastructure, as designing portable and efficient tests for this is non-trivial. We want to use the system tar to check our output (because what we really care about is interoperability), but we can't rely on it: 1. being able to read pax headers 2. being able to handle huge sizes or mtimes 3. supporting a "t" format we can parse So as a prerequisite, we can feed the system tar a reference tarball to make sure it can handle these features. The reference tar here was created with: dd if=/dev/zero seek=64G bs=1 count=1 of=huge touch -d @68719476737 huge tar cf - --format=pax | head -c 2048 using GNU tar. Note that this is not a complete tarfile, but it's enough to contain the headers we want to examine. Likewise, we need to convince git that it has a 64GB blob to output. Running "git add" on that 64GB file takes many minutes of CPU, and even compressed, the result is 64MB. So again, I pre-generated that loose object, and then took only the first 2k of it. That should be enough to generate 2MB of data before hitting an inflate error, which is plenty for us to generate the tar header (and then die of SIGPIPE while streaming the rest out). The tests are split so that we test as much as we can even with an uncooperative system tar. This actually catches the current breakage (which is that we die("BUG") trying to write the ustar header) on every system, and then on systems where we can, we go farther and actually verify the result. Helped-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-22Merge branch 'js/t5000-dont-copy-bin-sh'Libravatar Junio C Hamano1-1/+1
* js/t5000-dont-copy-bin-sh: t5000 on Windows: do not mistake "sh.exe" as "sh"
2014-11-24t5000 on Windows: do not mistake "sh.exe" as "sh"Libravatar Johannes Sixt1-1/+1
In their effort to emulate POSIX as close as possible, the MSYS tools and Cygwin treat the file name "foo.exe" as "foo" when the latter is asked for, but not present, but the former is present. Following this rule, 'cp /bin/sh a/bin' actually copies the file /bin/sh.exe, so that we now have a/bin/sh.exe in the repository. This difference did not matter in the tests in the past because we were only interested in the equality of contents generated in various ways. But recently added tests check file names, in particular, the presence of "a/bin/sh". This test fails on Windows, as we do not have a file by this name, but "a/bin/sh.exe". Use test-genrandom to generate the large binary file in the repository under the expected name. We could change the guilty line to 'cat /bin/sh >a/bin/sh', but it is better for test reproducibility to ensure that the test data is the same across platforms, which test-genrandom can guarantee. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-08Merge branch 'nd/archive-pathspec'Libravatar Junio C Hamano1-0/+14
"git archive" learned to filter what gets archived with pathspec. * nd/archive-pathspec: archive: support filtering paths with glob
2014-09-22archive: support filtering paths with globLibravatar Nguyễn Thái Ngọc Duy1-0/+14
This patch fixes two problems with using :(glob) (or even "*.c" without ":(glob)"). The first one is we forgot to turn on the 'recursive' flag in struct pathspec. Without that, tree_entry_interesting() will not mark potential directories "interesting" so that it can confirm whether those directories have anything matching the pathspec. The marking directories interesting has a side effect that we need to walk inside a directory to realize that there's nothing interested in there. By that time, 'archive' code has already written the (empty) directory down. That means lots of empty directories in the result archive. This problem is fixed by lazily writing directories down when we know they are actually needed. There is a theoretical bug in this implementation: we can't write empty trees/directories that match that pathspec. path_exists() is also made stricter in order to detect non-matching pathspec because when this 'recursive' flag is on, we most likely match some directories. The easiest way is not consider any directories "matched". Noticed-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-07t5000, t5003: simplify commitLibravatar René Scharfe1-8/+4
Add the whole directory of test files at once using git add instead of calling git update-index on each of them and use git commit instead of the plumbing commands write-tree, update-ref and commit-tree to build the commit. This simplifies the code considerably. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-25Merge branch 'ep/avoid-test-a-o'Libravatar Junio C Hamano1-1/+1
Update tests and scripts to avoid "test ... -a ...", which is often more error-prone than "test ... && test ...". Squashed misconversion fix-up into git-submodule.sh updates. * ep/avoid-test-a-o: git-submodule.sh: avoid "echo" path-like values git-submodule.sh: avoid "test <cond> -a/-o <cond>" t/test-lib-functions.sh: avoid "test <cond> -a/-o <cond>" t/t9814-git-p4-rename.sh: avoid "test <cond> -a/-o <cond>" t/t5538-push-shallow.sh: avoid "test <cond> -a/-o <cond>" t/t5403-post-checkout-hook.sh: avoid "test <cond> -a/-o <cond>" t/t5000-tar-tree.sh: avoid "test <cond> -a/-o <cond>" t/t4102-apply-rename.sh: avoid "test <cond> -a/-o <cond>" t/t0026-eol-config.sh: avoid "test <cond> -a/-o <cond>" t/t0025-crlf-auto.sh: avoid "test <cond> -a/-o <cond>" t/lib-httpd.sh: avoid "test <cond> -a/-o <cond>" git-rebase--interactive.sh: avoid "test <cond> -a/-o <cond>" git-mergetool.sh: avoid "test <cond> -a/-o <cond>" git-bisect.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-resolve.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-repack.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-merge.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-commit.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-clone.sh: avoid "test <cond> -a/-o <cond>" check_bindir: avoid "test <cond> -a/-o <cond>"
2014-06-16Merge branch 'sk/test-cmp-bin'Libravatar Junio C Hamano1-17/+17
* sk/test-cmp-bin: t5000, t5003: do not use test_cmp to compare binary files
2014-06-09t/t5000-tar-tree.sh: avoid "test <cond> -a/-o <cond>"Libravatar Elia Pinto1-1/+1
The construct is error-prone; "test" being built-in in most modern shells, the reason to avoid "test <cond> && test <cond>" spawning one extra process by using a single "test <cond> -a <cond>" no longer exists. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-04t5000, t5003: do not use test_cmp to compare binary filesLibravatar Stepan Kasal1-17/+17
test_cmp() is primarily meant to compare text files (and display the difference for debug purposes). Raw "cmp" is better suited to compare binary files (tar, zip, etc.). On MinGW, test_cmp is a shell function mingw_test_cmp that tries to read both files into environment, stripping CR characters (introduced in commit 4d715ac0). This function usually speeds things up, as fork is extremly slow on Windows. But no wonder that this function is extremely slow and sometimes even crashes when comparing large tar or zip files. Signed-off-by: Stepan Kasal <kasal@ucw.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-30t5000-tar-tree.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-3/+3
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do sed -i 's@`\(.*\)`@$(\1)@g' ${_f} done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-28add uploadarchive.allowUnreachable optionLibravatar Scott J. Goldman1-0/+9
In commit ee27ca4, we started restricting remote git-archive invocations to only accessing reachable commits. This matches what upload-pack allows, but does restrict some useful cases (e.g., HEAD:foo). We loosened this in 0f544ee, which allows `foo:bar` as long as `foo` is a ref tip. However, that still doesn't allow many useful things, like: 1. Commits accessible from a ref, like `foo^:bar`, which are reachable 2. Arbitrary sha1s, even if they are reachable. We can do a full object-reachability check for these cases, but it can be quite expensive if the client has sent us the sha1 of a tree; we have to visit every sub-tree of every commit in the worst case. Let's instead give site admins an escape hatch, in case they prefer the more liberal behavior. For many sites, the full object database is public anyway (e.g., if you allow dumb walker access), or the site admin may simply decide the security/convenience tradeoff is not worth it. This patch adds a new config option to disable the restrictions added in ee27ca4. It defaults to off, meaning there is no change in behavior by default. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-17Merge branch 'jk/t5000-gzip-simplify'Libravatar Junio C Hamano1-16/+4
Test fix. * jk/t5000-gzip-simplify: t5000: simplify gzip prerequisite checks
2013-12-04t5000: simplify gzip prerequisite checksLibravatar Jeff King1-16/+4
In t5000, we test the built-in ".tar.gz" config for git-archive. To make our tests portable, we check that we have a way to both gzip and gunzip, and we respected environment variables to point to alternate commands for doing these operations. However, the $GZIP variable did not actually do anything, as changing it would not affect the baked-in value in archive-tar.c. Moreover, setting the variable $GZIP influences gzip itself. From the gzip man page: The environment variable GZIP can hold a set of default options for gzip. These options are interpreted first and can be overwritten by explicit command line parameters. We could rename this variable, and use it to set up custom config (or even have a Makefile knob to affect the built binary), but it is not worth the trouble; nobody has ever reported a problem with the baked-in default, and they can always change it via config if they need to. Let's just drop the variable and use "gzip" in the test (keeping the prerequisite, of course). While we're at it, we can drop the GUNZIP variable and prerequisite; it uses "gzip -d", so if we have GZIP, we will have both. We can also use test_lazy_prereq for the gzip prerequisite, which is simpler and behaves more consistently with the rest of git (e.g., by making output available when the test is run with "-v"). Noticed-by: Christian Hesse <mail@eworm.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-12tar-tree: remove deprecated commandLibravatar John Keeping1-13/+3
"git tar-tree" has been a thin wrapper around "git archive" since commit fd88d9c (Remove upload-tar and make git-tar-tree a thin wrapper to git-archive, 2006-09-24), which also made it print a message indicating that git-tar-tree is deprecated. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-20t5000: test long filenamesLibravatar René Scharfe1-0/+46
Add a file with a long name to the test archive in order to check entries with pax extended headers. Also add a check for tar versions that doen't understand this format. Those versions should extract the headers as a regular files. Add code to check_tar() to interpret the path header if present, so that our tests work even with those tar versions. It's important to use the fallback code only if needed to still be able to detect git archive errorously creating pax headers as regular file entries (with a suitable tar version, of course). The archive used to check for pax header support in tar was generated using GNU tar 1.26 and its option --format=pax. Tested successfully on NetBSD 6.1, which has a tar version lacking pax header support. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-20t5000: simplify tar-tree testsLibravatar René Scharfe1-23/+8
Just compare the archives created by git tar-tree with the ones created using git archive with the equivalent options, whose contents are checked already, instead of extracting them again. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-20t5000: use check_tar for prefix testLibravatar René Scharfe1-12/+12
Perform the full range of checks against all archived files instead of looking only at the file type of a few of them. Also add a test of a git archive with a prefix ending in with a slash, i.e. adding a full directory level. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-20t5000: factor out check_tarLibravatar René Scharfe1-13/+22
Create a helper function that extracts a tar archive and checks its contents, modelled after check_zip in t5003. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-20t5000, t5003: create directories for extracted files lazilyLibravatar René Scharfe1-3/+3
Create the directories b and c just before they are needed instead of up front. For t5003 it turns out we don't need them at all. For t5000 it makes the coming modifications easier. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-20t5000: integrate export-subst tests into regular testsLibravatar René Scharfe1-32/+6
Instead of creating extra archives for testing substitutions, set the attribute export-subst and overwrite the marked file with the expected (expanded) content right between committing and archiving. Thus placeholder expansion based on the committed content is performed with each archive creation and the comparison with the contents of directory a yields the correct result. We can then remove the special tests for export-subst. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23archive-tar: use parse_config_key when parsing configLibravatar Jeff King1-1/+2
This is fewer lines of code, but more importantly, fixes a bogus pointer offset. We are looking for "tar." in the section, but later assume that the dot we found is at offset 9, not 3. This is a holdover from an earlier iteration of 767cf45 which called the section "tarfilter". As a result, we could erroneously reject some filters with dots in their name, as well as read uninitialized memory. Reported by (and test by) René Scharfe. Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-07t5000, t5003: move ZIP tests into their own scriptLibravatar René Scharfe1-69/+0
This makes ZIP specific tweaks easier. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-07t0024, t5000: use test_lazy_prereq for UNZIPLibravatar René Scharfe1-7/+5
This change makes the code smaller and we can put it at the top of the script, its rightful place as setup code. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06t0024, t5000: clear variable UNZIP, use GIT_UNZIP insteadLibravatar René Scharfe1-5/+5
InfoZIP's unzip takes default parameters from the environment variable UNZIP. Unset it in the test library and use GIT_UNZIP for specifying alternate versions of the unzip command instead. t0024 wasn't even using variable for the actual extraction. t5000 was, but when setting it to InfoZIP's unzip it would try to extract from itself (because it treats the contents of $UNZIP as parameters), which failed of course. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-03t5000: rationalize unzip testsLibravatar René Scharfe1-40/+39
Factor out a function for checking the contents of ZIP archives. It extracts their contents and compares them to the original files. This removes some duplicate code. Tests that just create archives can lose their UNZIP prerequisite. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-03archive-zip: streaming for deflated filesLibravatar René Scharfe1-0/+7
After an entry has been streamed out, its CRC and sizes are written as part of a data descriptor. For simplicity, we make the buffer for the compressed chunks twice as big as for the uncompressed ones, to be sure the result fit in even if deflate makes them bigger. t5000 verifies output. t1050 makes sure the command always respects core.bigfilethreshold Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-03archive-zip: streaming for stored filesLibravatar René Scharfe1-0/+6
Write a data descriptor containing the CRC of the entry and its sizes after streaming it out. For simplicity, do that only if we're storing files (option -0) for now. t5000 verifies output. t1050 makes sure the command always respects core.bigfilethreshold Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-03archive-tar: stream large blobs to tar fileLibravatar Nguyễn Thái Ngọc Duy1-0/+6
t5000 verifies output while t1050 makes sure the command always respects core.bigfilethreshold Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-16Merge branch 'jk/upload-archive-use-start-command'Libravatar Junio C Hamano1-5/+5
* jk/upload-archive-use-start-command: upload-archive: use start_command instead of fork
2011-11-21Merge branch 'jk/maint-1.6.2-upload-archive' into jk/maint-upload-archiveLibravatar Junio C Hamano1-0/+8
* jk/maint-1.6.2-upload-archive: archive: don't let remote clients get unreachable commits Conflicts: archive.c archive.h builtin-archive.c builtin/upload-archive.c t/t5000-tar-tree.sh
2011-11-21archive: don't let remote clients get unreachable commitsLibravatar Jeff King1-0/+8
Usually git is careful not to allow clients to fetch arbitrary objects from the database; for example, objects received via upload-pack must be reachable from a ref. Upload-archive breaks this by feeding the client's tree-ish directly to get_sha1, which will accept arbitrary hex sha1s, reflogs, etc. This is not a problem if all of your objects are publicly reachable anyway (or at least public to anybody who can run upload-archive). Or if you are making the repo available by dumb protocols like http or rsync (in which case the client can read your whole object db directly). But for sites which allow access only through smart protocols, clients may be able to fetch trees from commits that exist in the server's object database but are not referenced (e.g., because history was rewound). This patch tightens upload-archive's lookup to use dwim_ref rather than get_sha1. This means a remote client can only fetch the tip of a named ref, not an arbitrary sha1 or reflog entry. This also restricts some legitimate requests, too: 1. Reachable non-tip commits, like: git archive --remote=$url v1.0~5 2. Sub-trees of reachable commits, like: git archive --remote=$url v1.7.7:Documentation Local requests continue to use get_sha1, and are not restricted at all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-21upload-archive: use start_command instead of forkLibravatar Jeff King1-5/+5
The POSIX-function fork is not supported on Windows. Use our start_command API instead, respawning ourselves in a special "writer" mode to follow the alternate code path. Remove the NOT_MINGW-prereq for t5000, as git-archive --remote now works. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-15Revert "upload-archive: use start_command instead of fork"Libravatar Junio C Hamano1-5/+5
This reverts commit c09cd77ea2fe3580b33918a99fe138d239ac2aaf, expecting a better version to be rerolled soon.
2011-10-30upload-archive: use start_command instead of forkLibravatar Erik Faye-Lund1-5/+5
The POSIX-function fork is not supported on Windows. Use our start_command API instead. As this is the last call-site that depends on the fork-stub in compat/mingw.h, remove that as well. Add an undocumented flag to git-archive that tells it that the action originated from a remote, so features can be disabled. Thanks to Jeff King for work on this part. Remove the NOT_MINGW-prereq for t5000, as git-archive --remote now works. Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-03Skip archive --remote tests on WindowsLibravatar Johannes Sixt1-4/+4
These depend on a working git-upload-archive, which is broken on Windows, because it depends on fork(). Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-22upload-archive: allow user to turn off filtersLibravatar Jeff King1-3/+22
Some tar filters may be very expensive to run, so sites do not want to expose them via upload-archive. This patch lets users configure tar.<filter>.remote to turn them off. By default, gzip filters are left on, as they are about as expensive as creating zip archives. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-22archive: provide builtin .tar.gz filterLibravatar Jeff King1-0/+38
This works exactly as if the user had configured it via: [tar "tgz"] command = gzip -cn [tar "tar.gz"] command = gzip -cn but since it is so common, it's convenient to have it builtin without the user needing to do anything. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-22archive: implement configurable tar filtersLibravatar Jeff King1-0/+43
It's common to pipe the tar output produce by "git archive" through gzip or some other compressor. Locally, this can easily be done by using a shell pipe. When requesting a remote archive, though, it cannot be done through the upload-archive interface. This patch allows configurable tar filters, so that one could define a "tar.gz" format that automatically pipes tar output through gzip. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-01Skip 'git archive --remote' test on msysGitLibravatar Pat Thoyts1-1/+1
This test requires git daemon support which is not available on msysgit Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
2010-02-07archive: simplify archive format guessingLibravatar René Scharfe1-0/+10
The code to guess an output archive's format consumed any --format options and built a new one. Jonathan noticed that it does so in an unsafe way, risking to overflow the static buffer fmt_opt. Change the code to keep the existing --format options intact and to only add a new one if a format could be guessed based on the output file name. The new option is added as the first one, allowing the existing ones to overrule it, i.e. explicit --format options given on the command line win over format guesses, as before. To simplify the code further, format_from_name() is changed to return the full --format option, thus no potentially dangerous sprintf() calls are needed any more. Reported-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-08Git archive and trailing "/" in prefixLibravatar René Scharfe1-0/+12
With --prefix=string that does not end with a slash, the top-level entries are written out with the specified prefix as expected, but no paths in the directories are added. Fix this by adding the prefix in write_archive_entry() instead of letting get_pathspec() and read_tree_recursive() pair; they are designed to only handle prefixes that are path components. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27Test git archive --remoteLibravatar Thomas Rast1-0/+4
Add a small test case for git archive --remote (and thus git-upload-archive), which so far went untested. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-17archive tests: do not use .gitattributes in working directoryLibravatar René Scharfe1-4/+5
We are interested in using archive mostly from a bare repository, so it should not add .gitattributes to the work tree. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-22Use prerequisites to skip tests that need unzipLibravatar Johannes Sixt1-8/+8
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-22Use prerequisite tags to skip tests that depend on symbolic linksLibravatar Johannes Sixt1-1/+5
Many tests depend on that symbolic links work. This introduces a check that sets the prerequisite tag SYMLINKS if the file system supports symbolic links. Since so many tests have to check for this prerequisite, we do the check in test-lib.sh, so that we don't need to repeat the test in many scripts. To check for 'ln -s' failures, you can use a FAT partition on Linux: $ mkdosfs -C git-on-fat 1000000 $ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt Clone git to /mnt and $ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7 t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \ make test (These additionally skipped tests depend on POSIX permissions that FAT on Linux does not provide.) Signed-off-by: Johannes Sixt <j6t@kdbg.org>