| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git name-rev" assigned a phony "far in the future" date to tips of
refs that are not pointing at tag objects, and favored names based
on a ref with the oldest date. This made it almost impossible for
an unannotated tags and branches to be counted as a viable base,
which was especially problematic when the command is run with the
"--tags" option. If an unannotated tag that points at an ancient
commit and an annotated tag that points at a much newer commit
reaches the commit that is being named, the old unannotated tag was
ignored.
Update the "taggerdate" field of the rev-name structure, which is
initialized from the tip of ref, to have the committer date if the
object at the tip of ref is a commit, not a tag, so that we can
optionally take it into account when doing "is this name better?"
comparison logic.
When "name-rev" is run without the "--tags" option, the general
expectation is still to name the commit based on a tag if possible,
but use non-tag refs as fallback, and tiebreak among these non-tag
refs by favoring names with shorter hops from the tip. The use of a
phony "far in the future" date in the original code was an effective
way to ensure this expectation is held: a non-tag tip gets the same
"far in the future" timestamp, giving precedence to tags, and among
non-tag tips, names with shorter hops are preferred over longer
hops, without taking the "taggerdate" into account. As we are
taking over the "taggerdate" field to store the committer date for
tips with commits:
(1) keep the original logic when comparing names based on two refs
both of which are from refs/tags/;
(2) favoring a name based on a ref in refs/tags/ hierarchy over
a ref outside the hierarchy;
(3) between two names based on a ref both outside refs/tags/, give
precedence to a name with shorter hops and use "taggerdate"
only to tie-break.
A change to t4202 is a natural consequence. The test creates a
commit on a branch "side" and points at it with an unannotated tag
"refs/tags/side-2". The original code couldn't decide which one to
favor at all, and gave a name based on a branch (simply because
refs/heads/side sorts earlier than refs/tags/side-2). Because the
updated logic is taught to favor refs in refs/tags/ hierarchy, the
the test is updated to expect to see tags/side-2 instead.
[mjg: open-coded the comparisons in is_better_name(), dropping a
helper macro used in the original]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --graph" did not work well with "--name-only", even though
other forms of "diff" output were handled correctly.
* jk/log-graph-name-only:
diff: print line prefix for --name-only output
|
|
If you run "git log --graph --name-only", the pathnames are
not indented to go along with their matching commits (unlike
all of the other diff formats). We need to output the line
prefix for each item before writing it.
The tests cover both --name-status and --name-only. The
former actually gets this right already, because it builds
on the --raw format functions. It's only --name-only which
uses its own code (and this fix mirrors the code in
diff_flush_raw()).
Note that the tests don't follow our usual style of setting
up the "expect" output inside the test block. This matches
the surrounding style, but more importantly it is easier to
read: we don't have to worry about embedded single-quotes,
and the leading indentation is more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* nd/log-graph-configurable-colors:
document behavior of empty color name
color_parse_mem: allow empty color spec
log --graph: customize the graph lines with config log.graphColors
color.c: trim leading spaces in color_parse_mem()
color.c: fix color_parse_mem() with value_len == 0
|
|
Prior to c2f41bf52 (color.c: fix color_parse_mem() with
value_len == 0, 2017-01-19), the empty string was
interpreted as a color "reset". This was an accidental
outcome, and that commit turned it into an error.
However, scripts may pass the empty string as a default
value to "git config --get-color" to disable color when the
value is not defined. The git-add--interactive script does
this. As a result, the script is unusable since c2f41bf52
unless you have color.diff.plain defined (if it is defined,
then we don't parse the empty default at all).
Our test scripts didn't notice the recent breakage because
they run without a terminal, and thus without color. They
never hit this code path at all. And nobody noticed the
original buggy "reset" behavior, because it was effectively
a noop.
Let's fix the code to have an empty color name produce an
empty sequence of color codes. The tests need a few fixups:
- we'll add a new test in t4026 to cover this case. But
note that we need to tweak the color() helper. While
we're there, let's factor out the literal ANSI ESC
character. Otherwise it makes the diff quite hard to
read.
- we'll add a basic sanity-check in t4026 that "git add
-p" works at all when color is enabled. That would have
caught this bug, as well as any others that are specific
to the color code paths.
- 73c727d69 (log --graph: customize the graph lines with
config log.graphColors, 2017-01-19) added a test to
t4202 that checks some "invalid" graph color config.
Since ",, blue" before yielded only "blue" as valid, and
now yields "empty, empty, blue", we don't match the
expected output.
One way to fix this would be to change the expectation
to the empty color strings. But that makes the test much
less interesting, since we show only two graph lines,
both of which would be colorless.
Since the empty-string case is now covered by t4026,
let's remove them entirely here. They're just in the way
of the primary thing the test is supposed to be
checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you have a 256 colors terminal (or one with true color support), then
the predefined 12 colors seem limited. On the other hand, you don't want
to draw graph lines with every single color in this mode because the two
colors could look extremely similar. This option allows you to hand pick
the colors you want.
Even with standard terminal, if your background color is neither black
or white, then the graph line may match your background and become
hidden. You can exclude your background color (or simply the colors you
hate) with this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
|
|
"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
|
|
When c5c31d33 (grep: move pattern-type bits support to top-level
grep.[ch], 2012-10-03) introduced grep_commit_pattern_type() helper
function, the intention was to allow the users of grep API to having
to fiddle only with .pattern_type_option (which can be set to "fixed",
"basic", "extended", and "pcre"), and then immediately before compiling
the pattern strings for use, call grep_commit_pattern_type() to have
it prepare various bits in the grep_opt structure (like .fixed,
.regflags, etc.).
However, grep_set_pattern_type_option() helper function the grep API
internally uses were left as an external function by mistake. This
function shouldn't have been made callable by the users of the API.
Later when the grep API was used in revision traversal machinery,
the caller then mistakenly started calling the function around
34a4ae55 (log --grep: use the same helper to set -E/-F options as
"git grep", 2012-10-03), instead of setting the .pattern_type_option
field and letting the grep_commit_pattern_type() to take care of the
details.
This caused an unnecessary bug that made a configured
grep.patternType take precedence over the command line options
(e.g. --basic-regexp, --fixed-strings) in "git log" family of
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users may want to always use "--show-signature" while using git-log and
related commands.
When log.showSignature is set to true, git-log and related commands will
behave as if "--show-signature" was given to them.
Note that this config variable is meant to affect git-log, git-show,
git-whatchanged and git-reflog. Other commands like git-format-patch,
git-rev-list are not to be affected by this config variable.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If an user creates an alias with "--show-signature" early in command
line, e.g.
[alias] logss = log --show-signature
then there is no way to countermand it through command line.
Teach git-log and related commands about "--no-show-signature" command
line option. This will make "git logss --no-show-signature" run
without showing GPG signature.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Subsequent patches will want to reuse the 'signed' branch that the
'log --graph --show-signature' test creates and uses.
Split the set-up part into a test of its own, and make the existing
test into a separate one that only inspects the history on the 'signed'
branch. This way, it becomes clearer that tests added by subsequent
patches reuse the 'signed' branch in the same way.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
|
|
When we unwrap a tag to find its commit for a traversal, we
do not propagate the "name" field of the tag in the pending
array (i.e., the ref name the user gave us in the first
place) to the commit (instead, we use an empty string). This
means that "git log --source" will never show the tag-name
for commits we reach through it.
This was broken in 2073949 (traverse_commit_list: support
pending blobs/trees with paths, 2014-10-15). That commit
tried to be careful and avoid propagating the path
information for a tag (which would be nonsensical) to trees
and blobs. But it should not have cut off the "name" field,
which should carry forward to children.
Note that this does mean that the "name" field will carry
forward to blobs and trees, too. Whereas prior to 2073949,
we always gave them an empty string. This is the right thing
to do, but in practice no callers probably use it (since now
we have an explicit separate "path" field, which was the
point of 2073949).
We add tests here not only for the broken case, but also a
basic sanity test of "log --source" in general, which did
not have any coverage in the test suite.
Reported-by: Raymundo <gypark@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
|
|
If you init or clone an empty repository, the initial
message from running "git log" is not very friendly:
$ git init
Initialized empty Git repository in /home/peff/foo/.git/
$ git log
fatal: bad default revision 'HEAD'
Let's detect this situation and write a more friendly
message:
$ git log
fatal: your current branch 'master' does not have any commits yet
We also detect the case that 'HEAD' points to a broken ref;
this should be even less common, but is easy to see. Note
that we do not diagnose all possible cases. We rely on
resolve_ref, which means we do not get information about
complex cases. E.g., "--default master" would use dwim_ref
to find "refs/heads/master", but we notice only that
"master" does not exist. Similarly, a complex sha1
expression like "--default HEAD^2" will not resolve as a
ref.
But that's OK. We fall back to a generic error message in
those cases, and they are unlikely to be used anyway.
Catching an empty or broken "HEAD" improves the common case,
and the other cases are not regressed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
People who work on projects with mostly linear history with frequent
whole file renames may want to always use "git log --follow" when
inspecting the life of the content that live in a single path.
Teach the command to behave as if "--follow" was given from the
command line when log.follow configuration variable is set *and*
there is one (and only one) path on the command line.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
|
|
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
|
|
Many tests that predate the "verbose" helper function use a
pattern like:
test ... || {
echo ...
false
}
to give more verbose output. Using the helper, we can do
this with a single line, and avoid a || which interacts
badly with &&-chaining (besides fooling --chain-lint, we hit
the error block no matter which command in the chain failed,
so we may often show useless results).
In most cases, the messages printed by "verbose" are equally
good (in some cases better; t6006 accidentally redirects the
message to a file!). The exception is t7001, whose output
suffers slightly. However, it's still enough to show the
user which part failed, given that we will have just printed
the test script to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
in a location which causes a significant portion of the test
to be missed (e.g., the test effectively does nothing, or
consists of a long string of actions and output comparisons,
and we throw away the exit code of at least one part of the
string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because "--graph" is about connected history while --no-walk is
about discrete points, it does not make sense to allow these two
options at the same time. [1]
This change makes a few calls to "show --graph" fail in t4052, but
asking to show one commit with graph is a nonsensical thing to do.
Thus, tests on "show --graph" in t4052 have been removed [2,3].
Same tests on "show" without --graph option have already been tested
in 4052.
3 testcases have been added to test this patch.
[1]: http://article.gmane.org/gmane.comp.version-control.git/216083
[2]: http://article.gmane.org/gmane.comp.version-control.git/264950
[3]: http://article.gmane.org/gmane.comp.version-control.git/265107
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Helped-By: René Scharfe <l.s.r@web.de>
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Originally, we had the invert-grep flag in grep_opt, but because
"git grep --invert-grep" does not make sense except in conjunction
with "--files-with-matches", which is already covered by
"--files-without-matches", it was moved it to revisions structure.
To have the flag there expresses the function to the feature better.
When the newly inserted two tests run, the history would have commits
with messages "initial", "second", "third", "fourth", "fifth", "sixth"
and "Second", committed in this order. The commits that does not match
either "th" or "Sec" is "second" and "initial". For the case insensitive
case only "initial" matches.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git log --graph --show-signature command incorrectly indents the gpg
information about signed commits and merged signed tags. It does not
follow the level of indentation of the current commit.
Example of garbled output:
$ git log --show-signature --graph
* commit 258e0a237cb69aaa587b0a4fb528bb0316b1b776
|\ gpg: Signature made Mon, Jun 30, 2014 13:22:33 EDT using RSA key ID DA08
gpg: Good signature from "Jason Pyeron <jpye...@pdinc.us>"
Merge: 727c355 1ca13ed
| | Author: Jason Pyeron <jpye...@pdinc.us>
| | Date: Mon Jun 30 13:22:29 2014 -0400
| |
| | Merge of 1ca13ed2271d60ba9 branch - rebranding
| |
| * commit 1ca13ed2271d60ba93d40bcc8db17ced8545f172
| | gpg: Signature made Mon, Jun 23, 2014 9:45:47 EDT using RSA key ID DD37
gpg: Good signature from "Stephen Robert Guglielmo <s...@guglielmo.us>"
gpg: aka "Stephen Robert Guglielmo <srguglie...@gmail.com>"
Author: Stephen R Guglielmo <s...@guglielmo.us>
| | Date: Mon Jun 23 09:45:27 2014 -0400
| |
| | Minor URL updates
In log-tree.c modify show_sig_lines() function to call graph_show_oneline()
after each line of gpg information it has printed in order to preserve
the level of indentation for the next output line.
Reported-by: Jason Pyeron <jpyeron@pdinc.us>
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/log-follow-with-combined:
fix segfault with git log -c --follow
|
|
In diff_tree_combined we make a copy of diffopts. In
try_to_follow_renames, called via diff_tree_sha1, we free and
re-initialize diffopts->pathspec->items. Since we did not make a deep
copy of diffopts in diff_tree_combined, the original diffopts does not
get the update. By the time we return from diff_tree_combined,
rev->diffopt->pathspec->items points to an invalid memory address. We
get a segfault next time we try to access that pathspec.
Instead, along with the copy of diffopts, make a copy pathspec->items as
well.
We would also have to make a copy of pathspec->raw to keep it consistent
with pathspec->items, but nobody seems to rely on that.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mk/maint-graph-infinity-loop:
graph.c: infinite loop in git whatchanged --graph -m
|
|
The --graph code fell into infinite loop when asked to do what the
code did not expect.
* mk/maint-graph-infinity-loop:
graph.c: infinite loop in git whatchanged --graph -m
|
|
Fixes many rfc2047 quoting issues in the output from format-patch.
* js/format-2047:
format-patch tests: check quoting/encoding in To: and Cc: headers
format-patch: fix rfc2047 address encoding with respect to rfc822 specials
format-patch: make rfc2047 encoding more strict
format-patch: introduce helper function last_line_length()
format-patch: do not wrap rfc2047 encoded headers too late
format-patch: do not wrap non-rfc2047 headers too early
utf8: fix off-by-one wrapping of text
|
|
The wrapping logic in strbuf_add_wrapped_text() does currently not allow
lines that entirely fill the allowed width, instead it wraps the line one
character too early.
For example, the text "This is the sixth commit." formatted via
"%w(11,1,2)" (wrap at 11 characters, 1 char indent of first line, 2 char
indent of following lines) results in four lines: " This is", " the",
" sixth", " commit." This is wrong, because " the sixth" is exactly
11 characters long, and thus allowed.
Fix this by allowing the (width+1) character of a line to be a valid
wrapping point if it is a whitespace character.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line option parser for "git log -F -E --grep='<ere>'"
did not flip the "fixed" bit, violating the general "last option
wins" principle among conflicting options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running "whatchanged --graph -m" on a simple two-head merges
can fall into infinite loop.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
|
|
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
|
|
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
to show all refs in order by commit date.
But there are also other cases where the sorting is not wanted, such
as
<command producing revisions in order> |
git log --oneline --no-walk --stdin
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the i18n-specific test functions in test scripts for diffstat.
This issue was was introduced in v1.7.9-1-g7f814:
7f814 Use correct grammar in diffstat summary line
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Either end of revision range operator can be omitted to default to HEAD,
as in "origin.." (what did I do since I forked) or "..origin" (what did
they do since I forked). But the current parser interprets ".." as an
empty range "HEAD..HEAD", and worse yet, because ".." does exist on the
filesystem, we get this annoying output:
$ cd Documentation/howto
$ git log .. ;# give me recent commits that touch Documentation/ area.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
Surely we could say "git log ../" or even "git log -- .." to disambiguate,
but we shouldn't have to.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
|
|
Add tests to make sure that the three-dash separator lines appear
after the graph ancestry lines, and also the graph ancestry lines
are not broken between the diffstat and the patch.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also updates the autogenerated merge title message from "merge commit X"
to "merge tag X", and its effect can be seen in the changes to the test suite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-decorate-01-bool:
log.decorate: accept 0/1 bool values
|
|
We explicitly document "0" and "1" as synonyms for "false"
and "true" in boolean config options. However, we don't
actually handle those values in git_config_maybe_bool.
In most cases this works fine, as we call git_config_bool,
which in turn calls git_config_bool_or_int, which in turn
calls git_config_maybe_bool. Values of 0/1 are considered
"not bool", but their integer values end up being converted
to the corresponding boolean values.
However, the log.decorate code looks for maybe_bool
explicitly, so that it can fall back to the "short" and
"full" strings. It does not handle 0/1 at all, and considers
them invalid values.
We cannot simply add 0/1 support to git_config_maybe_bool.
That would confuse git_config_bool_or_int, which may want to
distinguish the integer values "0" and "1" from bools.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
Conflicts:
revision.c
|
Junio C Hamano
Jeff King
Nguyễn Thái Ngọc Duy
Jacob Keller
Mehul Jain
Matthieu Moy
David Turner
Dongcan Jiang
Christoph Junghans
Zoltan Klinger
Clemens Buchacher
Yann Droneaud
Jan H. Schönherr
Michał Kiedrowicz
Martin von Zweigbergk
Jiang Xin
Zbigniew Jędrzejewski-Szmek
Lucian Poston
Jay Soffian
Jonathan Nieder
Elijah Newren