summaryrefslogtreecommitdiff
path: root/t/t4200-rerere.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-09-24Merge branch 'en/rerere-multi-stage-1-fix'Libravatar Junio C Hamano1-0/+29
A corner case bugfix in "git rerere" code. * en/rerere-multi-stage-1-fix: rerere: avoid buffer overrun t4200: demonstrate rerere segfault on specially crafted merge
2018-09-17Merge branch 'tg/rerere'Libravatar Junio C Hamano1-0/+65
Fixes to "git rerere" corner cases, especially when conflict markers cannot be parsed in the file. * tg/rerere: rerere: recalculate conflict ID when unresolved conflict is committed rerere: teach rerere to handle nested conflicts rerere: return strbuf from handle path rerere: factor out handle_conflict function rerere: only return whether a path has conflicts or not rerere: fix crash with files rerere can't handle rerere: add documentation for conflict normalization rerere: mark strings for translation rerere: wrap paths in output in sq rerere: lowercase error messages rerere: unify error messages when read_cache fails
2018-09-11rerere: avoid buffer overrunLibravatar Elijah Newren1-1/+1
check_one_conflict() compares `i` to `active_nr` in two places to avoid buffer overruns, but left out an important third location. The code did used to have a check here comparing i to active_nr, back before commit fb70a06da2f1 ("rerere: fix an off-by-one non-bug", 2015-06-28), however the code at the time used an 'if' rather than a 'while' meaning back then that this loop could not have read past the end of the array, making the check unnecessary and it was removed. Unfortunately, in commit 5eda906b2873 ("rerere: handle conflicts with multiple stage #1 entries", 2015-07-24), the 'if' was changed to a 'while' and the check comparing i and active_nr was not re-instated, leading to this problem. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-11t4200: demonstrate rerere segfault on specially crafted mergeLibravatar Elijah Newren1-0/+29
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-06rerere: recalculate conflict ID when unresolved conflict is committedLibravatar Thomas Gummerer1-0/+7
Currently when a user doesn't resolve a conflict, commits the results, and does an operation which creates another conflict, rerere will use the ID of the previously unresolved conflict for the new conflict. This is because the conflict is kept in the MERGE_RR file, which 'rerere' reads every time it is invoked. After the new conflict is solved, rerere will record the resolution with the ID of the old conflict. So in order to replay the conflict, both merges would have to be re-done, instead of just the last one, in order for rerere to be able to automatically resolve the conflict. Instead of that, assign a new conflict ID if there are still conflicts in a file and the file had conflicts at a previous step. This ID matches the conflict we actually resolved at the corresponding step. Note that there are no backwards compatibility worries here, as rerere would have failed to even normalize the conflict before this patch series. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-06rerere: teach rerere to handle nested conflictsLibravatar Thomas Gummerer1-0/+37
Currently rerere can't handle nested conflicts and will error out when it encounters such conflicts. Do that by recursively calling the 'handle_conflict' function to normalize the conflict. Note that a conflict like this would only be produced if a user commits a file with conflict markers, and gets a conflict including that in a susbsequent operation. The conflict ID calculation here deserves some explanation: As we are using the same handle_conflict function, the nested conflict is normalized the same way as for non-nested conflicts, which means the ancestor in the diff3 case is stripped out, and the parts of the conflict are ordered alphabetically. The conflict ID is however is only calculated in the top level handle_conflict call, so it will include the markers that 'rerere' adds to the output. e.g. say there's the following conflict: <<<<<<< HEAD 1 ======= <<<<<<< HEAD 3 ======= 2 >>>>>>> branch-2 >>>>>>> branch-3~ it would be recorde as follows in the preimage: <<<<<<< 1 ======= <<<<<<< 2 ======= 3 >>>>>>> >>>>>>> and the conflict ID would be calculated as sha1(1<NUL><<<<<<< 2 ======= 3 >>>>>>><NUL>) Stripping out vs. leaving the conflict markers in place in the inner conflict should have no practical impact, but it simplifies the implementation. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-06rerere: fix crash with files rerere can't handleLibravatar Thomas Gummerer1-0/+21
Currently when a user does a conflict resolution and ends it (in any way that calls 'git rerere' again) with a file 'rerere' can't handle, subsequent rerere operations that are interested in that path, such as 'rerere clear' or 'rerere forget <path>' will fail, or even worse in the case of 'rerere clear' segfault. Such states include nested conflicts, or a conflict marker that doesn't have any match. This is because 'git rerere' calculates a conflict file and writes it to the MERGE_RR file. When the user then changes the file in any way rerere can't handle, and then calls 'git rerere' on it again to record the conflict resolution, the handle_file function fails, and removes the 'preimage' file in the rr-cache in the process, while leaving the ID in the MERGE_RR file. Now when 'rerere clear' is run, it reads the ID from the MERGE_RR file, however the 'fit_variant' function for the ID is never called as the 'preimage' file does not exist anymore. This means 'collection->status' in 'has_rerere_resolution' is NULL, and the command will crash. To fix this, remove the rerere ID from the MERGE_RR file in the case when we can't handle it, just after the 'preimage' file was removed and remove the corresponding variant from .git/rr-cache/. Removing it unconditionally is fine here, because if the user would have resolved the conflict and ran rerere, the entry would no longer be in the MERGE_RR file, so we wouldn't have this problem in the first place, while if the conflict was not resolved. Currently there is nothing left in this folder, as the 'preimage' was already deleted by the 'handle_file' function, so 'remove_variant' is a no-op. Still call the function, to make sure we clean everything up, in case we add some other files corresponding to a variant in the future. Note that other variants that have the same conflict ID will not be touched. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30tests: make use of the test_must_be_empty functionLibravatar Ævar Arnfjörð Bjarmason1-6/+3
Change various tests that use an idiom of the form: >expect && test_cmp expect actual To instead use: test_must_be_empty actual The test_must_be_empty() wrapper was introduced in ca8d148daf ("test: test_must_be_empty helper", 2013-06-09). Many of these tests have been added after that time. This was mostly found with, and manually pruned from: git grep '^\s+>.*expect.* &&$' t Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-14t: switch $_z40 to $ZERO_OIDLibravatar brian m. carlson1-1/+1
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with larger hashes. This commit was created by using the following sed command to modify all files in the t directory except t/test-lib.sh: sed -i 's/\$_z40/$ZERO_OID/g' Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-25Merge branch 'ps/test-chmtime-get'Libravatar Junio C Hamano1-4/+4
Test cleanup. * ps/test-chmtime-get: t/helper: 'test-chmtime (--get|-g)' to print only the mtime
2018-04-09t/helper: 'test-chmtime (--get|-g)' to print only the mtimeLibravatar Paul-Sebastian Ungureanu1-4/+4
Compared to 'test-chmtime -v +0 file' which prints the mtime and and the file name, 'test-chmtime --get file' displays only the mtime. If it is used in combination with (+|=|=+|=-|-)seconds, it changes and prints the new value. test-chmtime -v +0 file | sed 's/[^0-9].*$//' is now equivalent to: test-chmtime --get file Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-27t/helper: merge test-chmtime into test-toolLibravatar Nguyễn Thái Ngọc Duy1-11/+11
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-22rerere: allow approxidate in gc.rerereResolved/gc.rerereUnresolvedLibravatar Junio C Hamano1-0/+2
These two configuration variables are described in the documentation to take an expiry period expressed in the number of days: gc.rerereResolved:: Records of conflicted merge you resolved earlier are kept for this many days when 'git rerere gc' is run. The default is 60 days. gc.rerereUnresolved:: Records of conflicted merge you have not resolved are kept for this many days when 'git rerere gc' is run. The default is 15 days. There is no strong reason not to allow a more general "approxidate" expiry specification, e.g. "5.days.ago", or "never". Rename the config_get_expiry() helper introduced in the previous step to git_config_get_expiry_in_days() and move it to a more generic place, config.c, and use date.c::parse_expiry_date() to do so. Give it an ability to allow the caller to tell among three cases (i.e. there is no "gc.rerereResolved" config, there is and it is correctly parsed into the *expiry variable, and there was an error in parsing the given value). The current caller can work correctly without using the return value, though. In the future, we may find other variables that only allow an integer that specifies "this many days" or other unit of time, and when it happens we may need to drop "_days" suffix from the name of the function and instead pass the "scale" value as another parameter. But this will do for now. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-22t4200: parameterize "rerere gc" custom expiry testLibravatar Junio C Hamano1-25/+33
The test creates a rerere database entry that is two days old, and tries to expire with three different custom expiry configuration (keep ones less than 5 days old, keep ones used less than 5 days ago, and expire everything right now). We'll be introducing a different way to spell the same "5 days" and "right now" parameter in a later step; parameterize the test to make it easier to test the new spelling when it happens. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-22t4200: gather "rerere gc" togetherLibravatar Junio C Hamano1-27/+27
Move the "rerere gc with custom expiry" test up, so that it is close to the existing basic "rerere gc" tests. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-22t4200: make "rerere gc" test more robustLibravatar Junio C Hamano1-5/+14
The test blindly trusted that there may be _some_ entries left in the rerere database, and used them by updating their timestamps to see if the gc threshold variables are honoured correctly. This won't work if there is no entry in the database when the test begins. Instead, clear the rerere database, and populate it with a few known entries (which are bogus, but for the purpose of testing "garbage collection", it does not matter---we want to make sure we collect old cruft, even if the files are corrupt rerere database entries), and use them for the expiry test. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-22t4200: give us a clean slate after "rerere gc" testsLibravatar Junio C Hamano1-0/+2
The "multiple identical conflicts" test counts the number of entries in the rerere database after trying a handful of mergy operations and recording their resolutions, but without initializing the rerere database to a known state, allowing the state left by previous tests to trigger a false failure. Make it robust by cleaning the database before it starts. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-06rerere: adjust 'forget' to multi-variant world orderLibravatar Junio C Hamano1-0/+10
Because conflicts with the same contents inside conflict blocks enclosed by "<<<<<<<" and ">>>>>>>" can now have multiple variants to help three-way merge to adjust to the differences outside the conflict blocks, "rerere forget $path" needs to be taught that there may be multiple recorded resolutions that share the same conflict hash (which groups the conflicts with "the same contents inside conflict blocks"), among which there are some that would not be relevant to the conflict we are looking at. These "other variants" that happen to share the same conflict hash should not be cleared, and the variant that would apply to the current conflict may not be the zero-th one (which is the only one that is cleared by the current code). After finding the conflict hash, iterate over the existing variants and try to resolve the conflict using each of them to find the one that "cleanly" resolves the current conflict. That is the one we want to forget and record the preimage for, so that the user can record the corrected resolution. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-06rerere: gc and clearLibravatar Junio C Hamano1-6/+75
Adjust "git rerere gc" and "git rerere clear" to the new world order with rerere database with multiple variants for the same shape of conflicts. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-15rerere: do use multiple variantsLibravatar Junio C Hamano1-1/+1
This enables the multiple-variant support for real. Multiple conflicts of the same shape can have differences in contexts where they appear, interfering the replaying of recorded resolution of one conflict to another, and in such a case, their resolutions are recorded as different variants under the same conflict ID. We still need to adjust garbage collection codepaths for this change, but the basic "replay" functionality is functional with this change. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-15t4200: rerere a merge with two identical conflictsLibravatar Junio C Hamano1-0/+74
When the context of multiple identical conflicts are different, two seemingly the same conflict resolution cannot be safely applied. In such a case, at least we should be able to record these two resolutions separately in the rerere database, and reuse them when we see the same conflict later. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-15rerere: handle leftover rr-cache/$ID directory and postimage filesLibravatar Junio C Hamano1-1/+16
If by some accident there is only $GIT_DIR/rr-cache/$ID directory existed, we wouldn't have recorded a preimage for a conflict that is newly encountered, which would mean after a manual resolution, we wouldn't have recorded it by storing the postimage, because the logic used to be "if there is no rr-cache/$ID directory, then we are the first so record the preimage". Instead, record preimage if we do not have one. In addition, if there is only $GIT_DIR/rr-cache/$ID/postimage without corresponding preimage, we would have tried to call into merge() and punted. These would have been a situation frustratingly hard to recover from. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-06Merge branch 'fc/trivial'Libravatar Junio C Hamano1-1/+1
A random collection of style fixes and minor doc updates. * fc/trivial: setup: trivial style fixes run-command: trivial style fixes diff: trivial style fix revision: trivial style fixes pretty: trivial style fix describe: trivial style fixes transport-helper: trivial style fix sha1-name: trivial style cleanup branch: trivial style fix revision: add missing include doc/pull: clarify the illustrations t: replace pulls with merges merge: simplify ff-only option
2013-10-31t: replace pulls with mergesLibravatar Felipe Contreras1-1/+1
This is what the code intended. No functional changes. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-29t: use perl instead of "$PERL_PATH" where applicableLibravatar Jeff King1-4/+4
As of the last commit, we can use "perl" instead of "$PERL_PATH" when running tests, as the former is now a function which uses the latter. As the shorter "perl" is easier on the eyes, let's switch to using it everywhere. This is not quite a mechanical s/$PERL_PATH/perl/ replacement, though. There are some places where we invoke perl from a script we generate on the fly, and those scripts do not have access to our internal shell functions. The result can be double-checked by running: ln -s /bin/false bin-wrappers/perl make test which continues to pass even after this patch. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27Fix tests under GETTEXT_POISON on parseoptLibravatar Jiang Xin1-2/+2
Use the i18n-specific test functions in test scripts for parseopt tests. This issue was was introduced in v1.7.10.1-488-g54e6d: 54e6d i18n: parseopt: lookup help and argument translations when showing usage and been broken under GETTEXT_POISON=YesPlease since. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-24tests: enclose $PERL_PATH in double quotesLibravatar Junio C Hamano1-4/+4
Otherwise it will be split at a space after "Program" when it is set to "\\Program Files\perl" or something silly like that. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-12t: Replace 'perl' by $PERL_PATHLibravatar Vincent van Ravesteijn1-4/+4
GIT-BUILD-OPTIONS defines PERL_PATH to be used in the test suite. Only a few tests already actually use this variable when perl is needed. The other test just call 'perl' and it might happen that the wrong perl interpreter is used. This becomes problematic on Windows, when the perl interpreter that is compiled and installed on the Windows system is used, because this perl interpreter might introduce some unexpected LF->CRLF conversions. This patch makes sure that $PERL_PATH is used everywhere in the test suite and that the correct perl interpreter is used. Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-03Merge branch 'jn/merge-renormalize'Libravatar Junio C Hamano1-131/+277
* jn/merge-renormalize: merge-recursive --renormalize rerere: never renormalize rerere: migrate to parse-options API t4200 (rerere): modernize style ll-merge: let caller decide whether to renormalize ll-merge: make flag easier to populate Documentation/technical: document ll_merge merge-trees: let caller decide whether to renormalize merge-trees: push choice to renormalize away from low level t6038 (merge.renormalize): check that it can be turned off t6038 (merge.renormalize): try checkout -m and cherry-pick t6038 (merge.renormalize): style nitpicks Don't expand CRLFs when normalizing text during merge Try normalizing files to avoid delete/modify conflicts when merging Avoid conflicts when merging branches with mixed normalization Conflicts: builtin/rerere.c t/t4200-rerere.sh
2010-08-06rerere: migrate to parse-options APILibravatar Jonathan Nieder1-0/+91
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06t4200 (rerere): modernize styleLibravatar Jonathan Nieder1-125/+180
Guard all test code with test_expect_success to make the script easier to follow. While at it, pick some other nits: - use test_tick (more than we have to, to be realistic); - 'single quotes' and \escaped HERE documents where possible simplify review for escaping problems; - omit whitespace after >redirection operators for consistency with other tests; - use "update-index --refresh" instead of testing that "ls-files -u" output is empty, since the former produces nicer output on failure; - compare to expected nonempty "ls-files -u" output instead of counting lines when it is expected to be nonempty. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-14rerere: fix overeager gcLibravatar SZEDER Gábor1-3/+11
'rerere gc' prunes resolutions of conflicted merges that occurred long time ago, and when doing so it takes the creation time of the conflicted automerge results into account. This can cause the loss of frequently used conflict resolutions (e.g. long-living topic branches are merged into a regularly rebuilt integration branch (think of git's pu)) when they become old enough to exceed 'rerere gc's threshold. To prevent the loss of valuable merge resolutions 'rerere' will (1) update the timestamp of the recorded conflict resolution (i.e. 'postimage') each time when encountering and resolving the same merge conflict, and (2) take this timestamp, i.e. the time of the last usage into account when gc'ing. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20Use test_expect_success for test setupsLibravatar Brian Gernhardt1-34/+36
Several tests did not use test_expect_success for their setup commands. Putting these start commands into the testing framework means both that errors during setup will be caught quickly and that non-error text will be suppressed without -v. Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-04Teach --[no-]rerere-autoupdate option to merge, revert and friendsLibravatar Junio C Hamano1-0/+15
Introduce a command line option to override rerere.autoupdate configuration variable to make it more useful. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-06t4200: convert sed expression which operates on non-text file to perlLibravatar Brandon Casey1-1/+1
POSIX only requires sed to work on text files and MERGE_RR is not a text file. Some versions of sed complain that this file is not newline terminated, and exit non-zero. Use perl instead which does not have a problem with it. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-06t4200: remove two unnecessary linesLibravatar Brandon Casey1-2/+0
These two lines appear to be unnecessary. They set variables which are not used afterwards. The primary motivation to remove them is that the sed invocation exits non-zero for seds which require newline termination of input files. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-16Merge branch 'sb/dashless'Libravatar Junio C Hamano1-5/+5
* sb/dashless: Make usage strings dash-less t/: Use "test_must_fail git" instead of "! git" t/test-lib.sh: exit with small negagive int is ok with test_must_fail Conflicts: builtin-blame.c builtin-mailinfo.c builtin-mailsplit.c builtin-shortlog.c git-am.sh t/t4150-am.sh t/t4200-rerere.sh
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-5/+5
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13Move MERGE_RR from .git/rr-cache/ into .git/Libravatar Johannes Schindelin1-3/+3
If you want to reuse the rerere cache in another repository, and set a symbolic link to it, you do not want to have the two repositories interfer with each other by accessing the _same_ MERGE_RR. For example, if you use contrib/git-new-workdir to set up a second working directory, and you have a conflict in one working directory, but commit in the other working directory first, the wrong "resolution" will be recorded. The easy solution is to move MERGE_RR out of the rr-cache/ directory, which also corresponds with the notion that rr-cache/ contains cached resolutions, not some intermediate temporary states. Noticed by Kalle Olavi Niemitalo. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-10builtin-rerere: more carefully find conflict markersLibravatar Olivier Marin1-6/+20
When a conflicting file contains a line that begin with "=======", rerere failed to parse conflict markers. This result to a wrong preimage file and an unexpected error for the user. The boundary between ours and theirs not just begin with 7 equals, but is followed by either a SP or a LF. This patch enforces parsing rules so that markers match in the right order, and when ambiguous, the command does not autoresolve the conflicted file. Especially because we are introducing rerere.autoupdate configuration (which is off by default for safety) that automatically stages the resolution made by rerere, it is necessary to make sure that we do not autoresolve when there is any ambiguity. Signed-off-by: Olivier Marin <dkr@freesurf.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22rerere.autoupdateLibravatar Junio C Hamano1-0/+10
When this configuration is set, paths that are autoresolved by git-rerere are updated in the index as well.
2008-06-22t4200: fix rerere testLibravatar Junio C Hamano1-3/+3
The test used "diff-files -q" which is not about reporting if there is a difference at all. Instead, make sure that the path remains as conflicting in the index after rerere autoresolves it, as we will be adding rerere.autoupdate configuration with the next patch.
2008-05-24tests: do not use implicit "git diff --no-index"Libravatar Junio C Hamano1-3/+3
As a general principle, we should not use "git diff" to validate the results of what git command that is being tested has done. We would not know if we are testing the command in question, or locating a bug in the cute hack of "git diff --no-index". Rather use test_cmp for that purpose. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13more tr portability test script fixesLibravatar Jeff King1-1/+1
Dealing with NULs is not always safe with tr. On Solaris, incoming NULs are silently deleted by both the System V and UCB versions of tr. When converting to NULs, the System V version works fine, but the UCB version silently ignores the request to convert the character. This patch changes all instances of tr using NULs to use "perl -pe 'y///'" instead. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-17the use of 'tr' in the test suite isn't really portableLibravatar H.Merijn Brand1-1/+1
Some versions of 'tr' only accept octal codes if entered with three digits, and therefor misinterpret the '\0' in the test suite. Some versions of 'tr' reject the (needless) use of character classes. Signed-off-by: H.Merijn Brand <h.m.brand@xs4all.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-09rerere: record resolution even if file is not in merge baseLibravatar Johannes Schindelin1-5/+39
Two-file merges were rare enough that they were dropped outside of the radar. This fix is a trivial change to builtin-rerere.c::find_conflict(). It is still sane to insist that we do not do rerere for symlinks, and require to have stages #2 and #3, but we can drop the requirement to have stage #1. rerere does not use information from there anyway. This fix is from Junio, together with two tests to verify that it works as expected. Acked-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-06Enable "git rerere" by the config variable rerere.enabledLibravatar Johannes Schindelin1-3/+20
Earlier, "git rerere" was enabled by creating the directory .git/rr-cache. That is definitely not in line with most other features, which are enabled by a config variable. So, check the config variable "rerere.enabled". If it is set to "false" explicitely, do not activate rerere, even if .git/rr-cache exists. This should help when you want to disable rerere temporarily. If "rerere.enabled" is not set at all, fall back to detection of the directory .git/rr-cache. [jc: with minimum tweaks] Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-1/+1
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-2/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-03posix compatibility for t4200Libravatar Bryan Larsen1-1/+1
Fix t4200 so that it also works on OS X by not relying on gnu extensions to sed. Signed-off-by: Bryan Larsen <bryan@larsen.st> Signed-off-by: Junio C Hamano <junkio@cox.net>