| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The term `master` has a loaded history that serves as a constant
reminder of racial injustice. The Git project has no desire to
perpetuate this and already started avoiding it.
The test suite uses variations of this name for branches other than the
default one. Apart from t3200, where we just addressed this in the
previous commit, those instances can be renamed in an automated manner
because they do not require any changes outside of the test script, so
let's do that.
Seeing as the touched branches have very little (if anything) to do with
the default branch, we choose to use a completely separate naming
scheme: `topic_<number>` (it cannot be `topic-<number>` because t5515
uses the `test_oid` machinery with the term, and that machinery uses
shell variables internally, whose names cannot contain dashes).
This trick was performed by this (GNU) sed invocation:
$ sed -i 's/master\([a-z0-9]\)/topic_\1/g' t/t*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test cleanup.
* ma/test-quote-cleanup:
t4104: modernize and simplify quoting
t: don't spuriously close and reopen quotes
|
|
In the test scripts, the recommended style is, e.g.:
test_expect_success 'name' '
do-something somehow &&
do-some-more testing
'
When using this style, any single quote in the multi-line test section
is actually closing the lone single quotes that surround it.
It can be a non-issue in practice:
test_expect_success 'sed a little' '
sed -e 's/hi/lo/' in >out # "ok": no whitespace in s/hi/lo/
'
Or it can be a bug in the test, e.g., because variable interpolation
happens before the test even begins executing:
v=abc
test_expect_success 'variable interpolation' '
v=def &&
echo '"$v"' # abc
'
Change several such in-test single quotes to use double quotes instead
or, in a few cases, drop them altogether. These were identified using
some crude grepping. We're not fixing any test bugs here, but we're
hopefully making these tests slightly easier to grok and to maintain.
There are legitimate use cases for closing a quote and opening a new
one, e.g., both '\'' and '"'"' can be used to produce a literal single
quote. I'm not touching any of those here.
In t9401, tuck the redirecting ">" to the filename while we're touching
those lines.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When applying a binary patch, as an optimization, "apply" checks if the
postimage is already present. During this fetch, it is perfectly
expected for the postimage not to be present, so there is no need to
lazy-fetch missing objects. Teach "apply" not to lazy-fetch in this
case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing spaces before '&&' and switch tabs around '&&' to spaces.
Also fix the space after redirection operator in t3701 while we're here.
These issues were found using `git grep '[^ ]&&$'` and
`git grep -P '&&\t' t/`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output of "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable
or base64. Add a new mode to "git am --show-current-patch" in order to
straighten the suggestion.
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable or
base64. To simplify worktree operations and to avoid that users poke into
.git, it would be better if "git am" also provided a mode that copies
.git/rebase-merge/patch to stdout.
One possibility could be to have completely separate options, introducing
for example --show-current-message (for .git/rebase-apply/NNNN)
and --show-current-diff (for .git/rebase-apply/patch), while possibly
deprecating --show-current-patch.
That would even remove the need for the first two patches in the series.
However, the long common prefix would have prevented using an abbreviated
option such as "--show". Therefore, I chose instead to add a string
argument to --show-current-patch. The new argument is optional, so that
"git am --show-current-patch"'s behavior remains backwards-compatible.
The next choice to make is how to handle multiple --show-current-patch
options. Right now, something like "git am --abort --show-current-patch"
is rejected, and the previous suggestion would likewise have naturally
rejected a command line like
git am --show-current-message --show-current-diff
Therefore, I decided to also reject for example
git am --show-current-patch=diff --show-current-patch=raw
In other words the whole of --show-current-patch=xxx (including the
optional argument) is treated as the command mode. I found this to be
more consistent and intuitive, even though it differs from the usual
"last one wins" semantics of the git command line.
Add the code to parse submodes based on the above design, where for now
"raw" is the only valid submode. "raw" prints the full e-mail message
just like "git am --show-current-patch".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When applying multiple patches with git am, or when rebasing using the
am backend, it's possible that one of our patches has updated a
gitattributes file. Currently, we cache this information, so if a
file in a subsequent patch has attributes applied, the file will be
written out with the attributes in place as of the time we started the
rebase or am operation, not with the attributes applied by the previous
patch. This problem does not occur when using the -m or -i flags to
rebase.
To ensure we write the correct data into the working tree, expire the
cache after each patch that touches a path ending in ".gitattributes".
Since we load these attributes in multiple separate files, we must
expire them accordingly.
Verify that both the am and rebase code paths work correctly, including
the conflict marker size with am -3.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit 735285b403 ("am: fix signoff when other trailers are present",
2017-08-08) tests using variable $signoff were rewritten and it is no
longer used, so just remove it from the test setup.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
Using 'test_must_be_empty' is preferable to '! test -s', because it
gives a helpful error message if the given file is unexpectedly not
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was basically created by:
sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh
with the following notable exceptions:
- The '! test -s' check in '.gitmodules ignore=dirty suppresses
submodules with untracked content' in 't7508-status.sh' is left
as-is, because it's bogus and, therefore, it's subject of a
dedicated patch.
- The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and
't9135-git-svn-moved-branch-empty-file.sh' are immediately
preceeded by a 'test -f' to ensure that the files exist in the
first place. 'test_must_be_empty' ensures that as well, so those
'test -f' commands are removed as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* ar/t4150-am-scissors-test-fix:
t4150: fix broken test for am --scissors
|
|
Tests for "git am --[no-]scissors" [1] work in the following way:
1. Create files with commit messages
2. Use these files to create expected commits
3. Generate eml file with patch from expected commits
4. Create commits using git am with these eml files
5. Compare these commits with expected
The test for "git am --scissors" is supposed to take an e-mail with a
scissors line and in-body "Subject:" header and demonstrate that the
subject line from the e-mail itself is overridden by the in-body header
and that only text below the scissors line is included in the commit
message of the commit created by the invocation of "git am --scissors".
However, the setup of the test incorrectly uses a commit without the
scissors line and without the in-body header in the commit message,
producing eml file not suitable for testing of "git am --scissors".
This can be checked by intentionally breaking is_scissors_line function
in mailinfo.c, for example, by changing string ">8", which is used by
the test. With such change the test should fail, but does not.
Fix broken test by generating eml file with scissors line and in-body
header "Subject:". Since the two tests for --scissors and --no-scissors
options are there to test cutting or keeping the commit message, update
both tests to change the test file in the same way, which allows us to
generate only one eml file to be passed to git am. To clarify the
intention of the test, give files and tags more explicit names.
[1]: introduced in bf72ac17d (t4150: tests for am --[no-]scissors,
2015-07-19)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_z40/$ZERO_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new "--show-current-patch" option gives an end-user facing way
to get the diff being applied when "git rebase" (and "git am")
stops with a conflict.
* nd/rebase-show-current-patch:
rebase: introduce and use pseudo-ref REBASE_HEAD
rebase: add --show-current-patch
am: add --show-current-patch
|
|
Among the "in progress" commands, only git-am and git-merge do not
support --quit. Support --quit in git-am too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pointing the user to $GIT_DIR/rebase-apply may encourage them to mess
around in there, which is not a good thing. With this, the user does
not have to keep the path around somewhere (because after a couple of
commands, the path may be out of scrollback buffer) when they need to
look at the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If there was no 'Signed-off-by:' trailer but another trailer such as
'Reported-by:' then 'git am --signoff' would add a blank line between
the existing trailers and the added 'Signed-off-by:' line. e.g.
Rebase accepts '--rerere-autoupdate' as an option but only honors
it if '-m' is also given. Fix it for a non-interactive rebase by
passing on the option to 'git am' and 'git cherry-pick'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Fix by using the code provided for this purpose in sequencer.c.
Change the tests so that they check the formatting of the
'Signed-off-by:' lines rather than just grepping for them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An empty line should stop any pending in-body headers, and start the
actual body parsing.
This also modifies the original test for the in-body headers to actually
have a real commit body that starts with spaces, and changes the test to
check that the long line matches _exactly_, and doesn't get extra data
from the body.
Fixes:6b4b013f1884 ("mailinfo: handle in-body header continuations")
Cc: Jonathan Tan <jonathantanmy@google.com>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mailinfo currently handles multi-line headers, but it does not handle
multi-line in-body headers. Teach it to handle such headers, for
example, for this input:
From: author <author@example.com>
Date: Fri, 9 Jun 2006 00:44:16 -0700
Subject: a very long
broken line
Subject: another very long
broken line
interpret the in-body subject to be "another very long broken line"
instead of "another very long".
An existing test (t/t5100/msg0015) has an indented line immediately
after an in-body header - it has been modified to reflect the new
functionality.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Combined with "git format-patch --pretty=mboxrd", this should
allow us to round-trip commit messages with embedded mbox
"From " lines without corruption.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent "git am" had regression when adding a Signed-off-by line
with its "-s" option by an unintended tightening of how an existing
trailer block is detected.
* jc/builtin-am-signoff-regression-fix:
am: match --signoff to the original scripted version
|
|
Linus noticed that the recently reimplemented "git am -s" defines
the trailer block too rigidly, resulting in an unnecessary blank
line between the existing sign-offs and his new sign-off. An e-mail
submission sent to Linus in real life ends with mixture of sign-offs
and commentaries, e.g.
title here
message here
Signed-off-by: Original Author <original@auth.or>
[rv: tweaked frotz and nitfol]
Signed-off-by: Re Viewer <rv@ew.er>
Signed-off-by: Other Reviewer <other@rev.ewer>
---
patch here
Because the reimplementation reused append_signoff() helper that is
used by other codepaths, which is unaware that people intermix such
comments with their sign-offs in the trailer block, such a message
was judged to end with a non-trailer, resulting in an extra blank
line before adding a new sign-off.
The original scripted version of "git am" used a lot looser
definition, i.e. "if and only if there is no line that begins with
Signed-off-by:, add a blank line before adding a new sign-off". For
the upcoming release, stop using the append_signoff() in "git am"
and reimplement the looser definition used by the scripted version
to use only in "git am" to fix this regression in "am" while
avoiding new regressions to other users of append_signoff().
In the longer term, we should look into loosening append_signoff()
so that other codepaths that add a new sign-off behave the same way
as "git am -s", but that is a task for post-release.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's a bug in builtin/am.c in which we take a lock on
MERGE_RR recursively. But rather than fix am.c, this patch
fixes the confusing interface from rerere.c that caused the
bug. Read on for the gory details.
The setup_rerere() function both reads the existing MERGE_RR
file, and takes MERGE_RR.lock. In the rerere() and
rerere_forget() functions, we end up in write_rr(), which
will then commit the lock file.
But for functions like rerere_clear() that do not write to
MERGE_RR, we expect the caller to have handled
setup_rerere(). That caller would then need to release the
lockfile, but it can't; the lock struct is local to
rerere.c.
For builtin/rerere.c, this is OK. We run a single rerere
operation and then exit immediately, which has the side
effect of rolling back the lockfile.
But in builtin/am.c, this is actively wrong. If we run "git
am -3 --skip", we call setup-rerere twice without releasing
the lock:
1. The "--skip" causes us to call am_rerere_clear(), which
calls setup_rerere(), but never drops the lock.
2. We then proceed to the next patch.
3. The "--3way" may cause us to call rerere() to handle
conflicts in that patch, but we are already holding the
lock. The lockfile code dies with:
BUG: prepare_tempfile_object called for active object
We could fix this by having rerere_clear() call
rollback_lock_file(). But it feels a bit odd for it to roll
back a lockfile that it did not itself take. So let's
simplify the interface further, and handle setup_rerere in
the function itself, taking away the question from the
caller over whether they need to do so.
We can give rerere_gc() the same treatment, as well (even
though it doesn't have any callers besides builtin/rerere.c
at this point). Note that these functions don't take flags
from their callers to pass along to setup_rerere; that's OK,
because the flags would not be meaningful for what they are
doing.
Both of those functions need to hold the lock because even
though they do not write to MERGE_RR, they are still writing
and should be protected from a simultaneous "rerere" run.
But rerere_remaining(), "rerere diff", and "rerere status"
are all read-only operations. They want to setup_rerere(),
but do not care about taking the lock in the first place.
Since our update of MERGE_RR is the usual atomic rename done
by commit_lock_file, they can just do a lockless read. For
that, we teach setup_rerere a READONLY flag to avoid the
lock.
As a bonus, this pushes builtin/rerere.c's setup_rerere call
closer to the functions that use it. Which means that "git
rerere totally-bogus-command" will no longer silently
exit(0) in a repository without rerere enabled.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pt/am-tests:
t3901: test git-am encoding conversion
t3418: non-interactive rebase --continue with rerere enabled
t4150: tests for am --[no-]scissors
t4150: am with post-applypatch hook
t4150: am with pre-applypatch hook
t4150: am with applypatch-msg hook
t4150: am --resolved fails if index has unmerged entries
t4150: am --resolved fails if index has no changes
t4150: am refuses patches when paused
t4151: am --abort will keep dirty index intact
t4150: am fails if index is dirty
t4150: am.messageid really adds the message id
|
|
Various enhancements around "git am" reading patches generated by
foreign SCM.
* pt/am-foreign:
am: teach mercurial patch parser how to read from stdin
am: use gmtime() to parse mercurial patch date
t4150: test applying StGit series
am: teach StGit patch parser how to read from stdin
t4150: test applying StGit patch
|
|
This reverts commit d96a275b91bae1800cd43be0651e886e7e042a17.
It used to be possible to apply a patch series with "git am mbox"
and then only after seeing a failure, switch to three-way mode via
"git am -3" (no other options or arguments). The commit being
reverted broke this workflow.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 017678b (am/mailinfo: Disable scissors processing by default,
2009-08-26), git-am supported the --[no-]scissors option, passing it to
git-mailinfo.
Add tests to ensure that git-am will pass the --scissors option to
git-mailinfo, and that --no-scissors will override the configuration
setting of mailinfo.scissors.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh will invoke the post-applypatch hook after the patch is
applied and a commit is made. The exit code of the hook is ignored.
Add tests for this hook.
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sg will invoke the pre-applypatch hook after applying the patch
to the index, but before a commit is made. Should the hook exit with a
non-zero status, git am will exit.
Add tests for this hook.
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
will invoke the applypatch-msg hooks just after extracting the patch
message. If the applypatch-msg hook exits with a non-zero status, git-am
abort before even applying the patch to the index.
Add tests for this hook.
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since c1d1128 (git-am --resolved: more usable error message.,
2006-04-28), git-am --resolved will check to see if there are any
unmerged entries, and will error out with a user-friendly error message
if there are.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 6d28644 (git-am: do not allow empty commits by mistake.,
2006-02-23), git-am --resolved will check to see if the index has any
changes to prevent the user from creating an empty commit by mistake.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since c95b138 (Fix git-am safety checks, 2006-09-15), when there is a
session in progress, git-am will check the command-line arguments and
standard input to ensure that the user does not pass it any patches.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
will ensure that the index is clean before applying the patch. This is
to prevent changes unrelated to the patch from being committed.
Add a test for this check.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since a078f73 (git-am: add --message-id/--no-message-id, 2014-11-25),
the am.messageid setting determines whether the --message-id option is
set by default.
Add a test for this.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-mailsplit, which splits mbox patches, will read the patch from stdin
when the filename is "-" or there are no files listed on the
command-line.
To be consistent with this behavior, teach the mercurial patch parser to
read from stdin if the filename is "-" or no files are listed on the
command-line.
Based-on-patch-by: Chris Packham <judge.packham@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An example of the line in a mercurial patch that specifies the date of
the commit would be:
# Date 1433753301 25200
where the first number is the number of seconds since the unix epoch (in
UTC), and the second number is the offset of the timezone, in second s
west of UTC (negative if the timezone is east of UTC).
git-am uses localtime() to break down the first number into its
components (year, month, day, hours, minutes, seconds etc.). However,
the returned components are relative to the user's time zone. As a
result, if the user's time zone does not match the time zone specified
in the patch, the resulting commit will have the wrong author date.
Fix this by using gmtime() instead, which uses UTC instead of the user's
time zone.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A StGit series is a directory containing a "series" file which begins
with the line:
# This series applies on GIT commit XXXXX
where XXXXX is the commit ID that the patch series applies on. Every
following line names a patch in the directory to be applied.
Test that git-am, when given this "series" file, is able to detect it as
an StGit series and apply all the patches in the series.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-mailsplit, which splits mbox patches, will read the patch from stdin
when the filename is "-" or there are no files listed on the
command-line.
To be consistent with this behavior, teach the StGit patch parser to
read from stdin if the filename is "-" or no files are listed on the
command-line.
Based-on-patch-by: Chris Packham <judge.packham@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, an StGit patch separates the subject from the commit message
and headers as follows:
$subject
From: $author_name <$author_email>
$message
---
$diffstats
We test git-am's ability to detect such a patch as an StGit patch, and
its ability to be able to extract the commit author, date and message
from such a patch.
Based-on-patch-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a setup for git am -3 in a separate test instead of creating
this setup each time.
This prepares for the next commit which will use this setup as well.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parse the option and pass it directly to git-mailinfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace instances of ! test -d with test_path_is_missing.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The following bug has been observed:
$ git am # no input file
^C
$ git am --abort
Resolve operation not in progress, we are not resuming.
This happens because the following test fails:
test -d "$dotest" && test -f "$dotest/last" && test -f "$dotest/next"
and the codepath for an "am in-progress" is not executed. It falls back
to the codepath that treats this as a "fresh execution". Before
rr/rebase-autostash, this condition was
test -d "$dotest"
It would incorrectly execute the "normal" am --abort codepath:
git read-tree --reset -u HEAD ORIG_HEAD
git reset ORIG_HEAD
by incorrectly assuming that an am is "in progress" (i.e. ORIG_HEAD
etc. was written during the previous execution).
Notice that
$ git am
^C
executes nothing of significance, is equivalent to
$ mkdir .git/rebase-apply
Therefore, the correct solution is to treat .git/rebase-apply as a
"stray directory" and remove it on --abort in the fresh-execution
codepath. Also ensure that we're not called with --rebasing from
git-rebase--am.sh; in that case, it is the responsibility of the caller
to handle and stray directories.
While at it, tell the user to run "git am --abort" to get rid of the
stray $dotest directory, if she attempts anything else.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally update-pre-post-images could assume that any whitespace
fixing will make the result only shorter by unexpanding runs of
leading SPs into HTs and removing trailing whitespaces at the end of
lines. Updating the post-image we read from the patch to match the
actual result can be performed in-place under this assumption.
These days, however, we have tab-in-indent (aka Python) rule whose
result can be longer than the original, and we do need to allocate
a larger buffer than the input and replace the result.
Fortunately the support for lengthening rewrite was already added
when we began supporting "match while ignoring whitespace
differences" mode in 86c91f91794c (git apply: option to ignore
whitespace differences, 2009-08-04). We only need to correctly
count the number of bytes necessary to hold the updated result and
tell the function to allocate a new buffer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git am empty" test uses the construct
git am empty-file && false || :
which unconditionally returns true. Use test_must_fail instead, which
also has the benefit of noticing if "git am" has segfaulted.
While at it, tighten the test to check that the diagnostic appears on
stderr and not stdout.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Junio C Hamano
Martin Ågren
Jonathan Tan
Andrei Rybak
Paolo Bonzini
brian m. carlson
SZEDER Gábor
Nguyễn Thái Ngọc Duy
Phillip Wood
Linus Torvalds
Eric Wong
Jeff King
Remi Lespinet
Paul Tan
Ramkumar Ramachandra
Jonathan Nieder