summaryrefslogtreecommitdiff
path: root/t/t4150-am.sh
AgeCommit message (Collapse)AuthorFilesLines
2015-09-08Merge branch 'jc/builtin-am-signoff-regression-fix'Libravatar Junio C Hamano1-0/+48
Recent "git am" had regression when adding a Signed-off-by line with its "-s" option by an unintended tightening of how an existing trailer block is detected. * jc/builtin-am-signoff-regression-fix: am: match --signoff to the original scripted version
2015-09-06am: match --signoff to the original scripted versionLibravatar Junio C Hamano1-0/+48
Linus noticed that the recently reimplemented "git am -s" defines the trailer block too rigidly, resulting in an unnecessary blank line between the existing sign-offs and his new sign-off. An e-mail submission sent to Linus in real life ends with mixture of sign-offs and commentaries, e.g. title here message here Signed-off-by: Original Author <original@auth.or> [rv: tweaked frotz and nitfol] Signed-off-by: Re Viewer <rv@ew.er> Signed-off-by: Other Reviewer <other@rev.ewer> --- patch here Because the reimplementation reused append_signoff() helper that is used by other codepaths, which is unaware that people intermix such comments with their sign-offs in the trailer block, such a message was judged to end with a non-trailer, resulting in an extra blank line before adding a new sign-off. The original scripted version of "git am" used a lot looser definition, i.e. "if and only if there is no line that begins with Signed-off-by:, add a blank line before adding a new sign-off". For the upcoming release, stop using the append_signoff() in "git am" and reimplement the looser definition used by the scripted version to use only in "git am" to fix this regression in "am" while avoiding new regressions to other users of append_signoff(). In the longer term, we should look into loosening append_signoff() so that other codepaths that add a new sign-off behave the same way as "git am -s", but that is a task for post-release. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-01rerere: release lockfile in non-writing functionsLibravatar Jeff King1-0/+36
There's a bug in builtin/am.c in which we take a lock on MERGE_RR recursively. But rather than fix am.c, this patch fixes the confusing interface from rerere.c that caused the bug. Read on for the gory details. The setup_rerere() function both reads the existing MERGE_RR file, and takes MERGE_RR.lock. In the rerere() and rerere_forget() functions, we end up in write_rr(), which will then commit the lock file. But for functions like rerere_clear() that do not write to MERGE_RR, we expect the caller to have handled setup_rerere(). That caller would then need to release the lockfile, but it can't; the lock struct is local to rerere.c. For builtin/rerere.c, this is OK. We run a single rerere operation and then exit immediately, which has the side effect of rolling back the lockfile. But in builtin/am.c, this is actively wrong. If we run "git am -3 --skip", we call setup-rerere twice without releasing the lock: 1. The "--skip" causes us to call am_rerere_clear(), which calls setup_rerere(), but never drops the lock. 2. We then proceed to the next patch. 3. The "--3way" may cause us to call rerere() to handle conflicts in that patch, but we are already holding the lock. The lockfile code dies with: BUG: prepare_tempfile_object called for active object We could fix this by having rerere_clear() call rollback_lock_file(). But it feels a bit odd for it to roll back a lockfile that it did not itself take. So let's simplify the interface further, and handle setup_rerere in the function itself, taking away the question from the caller over whether they need to do so. We can give rerere_gc() the same treatment, as well (even though it doesn't have any callers besides builtin/rerere.c at this point). Note that these functions don't take flags from their callers to pass along to setup_rerere; that's OK, because the flags would not be meaningful for what they are doing. Both of those functions need to hold the lock because even though they do not write to MERGE_RR, they are still writing and should be protected from a simultaneous "rerere" run. But rerere_remaining(), "rerere diff", and "rerere status" are all read-only operations. They want to setup_rerere(), but do not care about taking the lock in the first place. Since our update of MERGE_RR is the usual atomic rename done by commit_lock_file, they can just do a lockless read. For that, we teach setup_rerere a READONLY flag to avoid the lock. As a bonus, this pushes builtin/rerere.c's setup_rerere call closer to the functions that use it. Which means that "git rerere totally-bogus-command" will no longer silently exit(0) in a repository without rerere enabled. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-04git-am: add am.threeWay config variableLibravatar Remi Lespinet1-0/+19
Add the am.threeWay configuration variable to use the -3 or --3way option of git am by default. When am.threeway is set and not desired for a specific git am command, the --no-3way option can be used to override it. Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-03Merge branch 'pt/am-tests'Libravatar Junio C Hamano1-0/+217
* pt/am-tests: t3901: test git-am encoding conversion t3418: non-interactive rebase --continue with rerere enabled t4150: tests for am --[no-]scissors t4150: am with post-applypatch hook t4150: am with pre-applypatch hook t4150: am with applypatch-msg hook t4150: am --resolved fails if index has unmerged entries t4150: am --resolved fails if index has no changes t4150: am refuses patches when paused t4151: am --abort will keep dirty index intact t4150: am fails if index is dirty t4150: am.messageid really adds the message id
2015-08-03Merge branch 'pt/am-foreign'Libravatar Junio C Hamano1-0/+82
Various enhancements around "git am" reading patches generated by foreign SCM. * pt/am-foreign: am: teach mercurial patch parser how to read from stdin am: use gmtime() to parse mercurial patch date t4150: test applying StGit series am: teach StGit patch parser how to read from stdin t4150: test applying StGit patch
2015-07-24Revert "git-am: add am.threeWay config variable"Libravatar Junio C Hamano1-19/+0
This reverts commit d96a275b91bae1800cd43be0651e886e7e042a17. It used to be possible to apply a patch series with "git am mbox" and then only after seeing a failure, switch to three-way mode via "git am -3" (no other options or arguments). The commit being reverted broke this workflow. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20t4150: tests for am --[no-]scissorsLibravatar Paul Tan1-0/+48
Since 017678b (am/mailinfo: Disable scissors processing by default, 2009-08-26), git-am supported the --[no-]scissors option, passing it to git-mailinfo. Add tests to ensure that git-am will pass the --scissors option to git-mailinfo, and that --no-scissors will override the configuration setting of mailinfo.scissors. Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20t4150: am with post-applypatch hookLibravatar Paul Tan1-0/+38
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am.sh will invoke the post-applypatch hook after the patch is applied and a commit is made. The exit code of the hook is ignored. Add tests for this hook. Helped-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20t4150: am with pre-applypatch hookLibravatar Paul Tan1-0/+33
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am.sg will invoke the pre-applypatch hook after applying the patch to the index, but before a commit is made. Should the hook exit with a non-zero status, git am will exit. Add tests for this hook. Helped-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20t4150: am with applypatch-msg hookLibravatar Paul Tan1-0/+35
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am will invoke the applypatch-msg hooks just after extracting the patch message. If the applypatch-msg hook exits with a non-zero status, git-am abort before even applying the patch to the index. Add tests for this hook. Helped-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20t4150: am --resolved fails if index has unmerged entriesLibravatar Paul Tan1-0/+13
Since c1d1128 (git-am --resolved: more usable error message., 2006-04-28), git-am --resolved will check to see if there are any unmerged entries, and will error out with a user-friendly error message if there are. Add a test for this. Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20t4150: am --resolved fails if index has no changesLibravatar Paul Tan1-0/+12
Since 6d28644 (git-am: do not allow empty commits by mistake., 2006-02-23), git-am --resolved will check to see if the index has any changes to prevent the user from creating an empty commit by mistake. Add a test for this. Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20t4150: am refuses patches when pausedLibravatar Paul Tan1-0/+14
Since c95b138 (Fix git-am safety checks, 2006-09-15), when there is a session in progress, git-am will check the command-line arguments and standard input to ensure that the user does not pass it any patches. Add a test for this. Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20t4150: am fails if index is dirtyLibravatar Paul Tan1-0/+12
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am will ensure that the index is clean before applying the patch. This is to prevent changes unrelated to the patch from being committed. Add a test for this check. Reviewed-by: Stefan Beller <sbeller@google.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-07t4150: am.messageid really adds the message idLibravatar Paul Tan1-0/+12
Since a078f73 (git-am: add --message-id/--no-message-id, 2014-11-25), the am.messageid setting determines whether the --message-id option is set by default. Add a test for this. Signed-off-by: Paul Tan <pyokagan@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-15am: teach mercurial patch parser how to read from stdinLibravatar Paul Tan1-0/+10
git-mailsplit, which splits mbox patches, will read the patch from stdin when the filename is "-" or there are no files listed on the command-line. To be consistent with this behavior, teach the mercurial patch parser to read from stdin if the filename is "-" or no files are listed on the command-line. Based-on-patch-by: Chris Packham <judge.packham@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-15am: use gmtime() to parse mercurial patch dateLibravatar Paul Tan1-0/+23
An example of the line in a mercurial patch that specifies the date of the commit would be: # Date 1433753301 25200 where the first number is the number of seconds since the unix epoch (in UTC), and the second number is the offset of the timezone, in second s west of UTC (negative if the timezone is east of UTC). git-am uses localtime() to break down the first number into its components (year, month, day, hours, minutes, seconds etc.). However, the returned components are relative to the user's time zone. As a result, if the user's time zone does not match the time zone specified in the patch, the resulting commit will have the wrong author date. Fix this by using gmtime() instead, which uses UTC instead of the user's time zone. Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-15t4150: test applying StGit seriesLibravatar Paul Tan1-0/+17
A StGit series is a directory containing a "series" file which begins with the line: # This series applies on GIT commit XXXXX where XXXXX is the commit ID that the patch series applies on. Every following line names a patch in the directory to be applied. Test that git-am, when given this "series" file, is able to detect it as an StGit series and apply all the patches in the series. Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-15am: teach StGit patch parser how to read from stdinLibravatar Paul Tan1-0/+10
git-mailsplit, which splits mbox patches, will read the patch from stdin when the filename is "-" or there are no files listed on the command-line. To be consistent with this behavior, teach the StGit patch parser to read from stdin if the filename is "-" or no files are listed on the command-line. Based-on-patch-by: Chris Packham <judge.packham@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-08t4150: test applying StGit patchLibravatar Paul Tan1-0/+22
By default, an StGit patch separates the subject from the commit message and headers as follows: $subject From: $author_name <$author_email> $message --- $diffstats We test git-am's ability to detect such a patch as an StGit patch, and its ability to be able to extract the commit author, date and message from such a patch. Based-on-patch-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Paul Tan <pyokagan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-04git-am: add am.threeWay config variableLibravatar Remi Lespinet1-0/+19
Add the am.threeWay configuration variable to use the -3 or --3way option of git am by default. When am.threeway is set and not desired for a specific git am command, the --no-3way option can be used to override it. Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-04t4150-am: refactor am -3 testsLibravatar Remi Lespinet1-15/+11
Create a setup for git am -3 in a separate test instead of creating this setup each time. This prepares for the next commit which will use this setup as well. Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-25git-am: add --message-id/--no-message-idLibravatar Paolo Bonzini1-0/+23
Parse the option and pass it directly to git-mailinfo. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-17t/am: use test_path_is_missing() where appropriateLibravatar Ramkumar Ramachandra1-17/+17
Replace instances of ! test -d with test_path_is_missing. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-17am: handle stray $dotest directoryLibravatar Ramkumar Ramachandra1-0/+6
The following bug has been observed: $ git am # no input file ^C $ git am --abort Resolve operation not in progress, we are not resuming. This happens because the following test fails: test -d "$dotest" && test -f "$dotest/last" && test -f "$dotest/next" and the codepath for an "am in-progress" is not executed. It falls back to the codepath that treats this as a "fresh execution". Before rr/rebase-autostash, this condition was test -d "$dotest" It would incorrectly execute the "normal" am --abort codepath: git read-tree --reset -u HEAD ORIG_HEAD git reset ORIG_HEAD by incorrectly assuming that an am is "in progress" (i.e. ORIG_HEAD etc. was written during the previous execution). Notice that $ git am ^C executes nothing of significance, is equivalent to $ mkdir .git/rebase-apply Therefore, the correct solution is to treat .git/rebase-apply as a "stray directory" and remove it on --abort in the fresh-execution codepath. Also ensure that we're not called with --rebasing from git-rebase--am.sh; in that case, it is the responsibility of the caller to handle and stray directories. While at it, tell the user to run "git am --abort" to get rid of the stray $dotest directory, if she attempts anything else. Reported-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-22apply --whitespace=fix: avoid running over the postimage bufferLibravatar Junio C Hamano1-1/+1
Originally update-pre-post-images could assume that any whitespace fixing will make the result only shorter by unexpanding runs of leading SPs into HTs and removing trailing whitespaces at the end of lines. Updating the post-image we read from the patch to match the actual result can be performed in-place under this assumption. These days, however, we have tab-in-indent (aka Python) rule whose result can be longer than the original, and we do need to allocate a larger buffer than the input and replace the result. Fortunately the support for lengthening rewrite was already added when we began supporting "match while ignoring whitespace differences" mode in 86c91f91794c (git apply: option to ignore whitespace differences, 2009-08-04). We only need to correctly count the number of bytes necessary to hold the updated result and tell the function to allocate a new buffer. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-14test: am of empty patch should not succeedLibravatar Jonathan Nieder1-1/+1
The "git am empty" test uses the construct git am empty-file && false || : which unconditionally returns true. Use test_must_fail instead, which also has the benefit of noticing if "git am" has segfaulted. While at it, tighten the test to check that the diagnostic appears on stderr and not stdout. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-14test: use test_i18ncmp for "Patch format detection failed" messageLibravatar Jonathan Nieder1-1/+1
v1.7.8.5~2 (am: don't infloop for an empty input file, 2012-02-25) added a check for the human-readable message "Patch format detection failed." but we forgot to suppress that check when running tests with git configured to write output in another language. Noticed by running tests with GETTEXT_POISON=YesPlease. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-04Merge branch 'jc/am-3-nonstandard-popt'Libravatar Junio C Hamano1-0/+15
* jc/am-3-nonstandard-popt: test: "am -3" can accept non-standard -p<num> am -3: allow nonstandard -p<num> option
2012-02-26test: "am -3" can accept non-standard -p<num>Libravatar Junio C Hamano1-0/+15
This adds a test for the previous one to make sure that "am -3 -p0" can read patches created with the --no-prefix option. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-26Merge branch 'maint'Libravatar Junio C Hamano1-0/+10
* maint: Document accumulated fixes since 1.7.9.2 Git 1.7.8.5 grep -P: Fix matching ^ and $ am: don't infloop for an empty input file rebase -m: only call "notes copy" when rewritten exists and is non-empty git-p4: remove bash-ism in t9800 git-p4: remove bash-ism in t9809 git-p4: fix submit regression with clientSpec and subdir clone git-p4: set useClientSpec variable on initial clone Makefile: add thread-utils.h to LIB_H Conflicts: RelNotes t/t9809-git-p4-client-view.sh
2012-02-26Sync with 1.7.8.5Libravatar Junio C Hamano1-0/+10
2012-02-26am: don't infloop for an empty input fileLibravatar Jim Meyering1-0/+10
git-am.sh's check_patch_format function would attempt to preview the patch to guess its format, but would go into an infinite loop when the patch file happened to be empty. The solution: exit the loop when "read" fails, not when the line var, "$l1" becomes empty. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-13Sync with maintLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-13t: use sane_unset instead of unsetLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Change several tests to use the sane_unset function introduced in v1.7.3.1-35-g00648ba instead of the built-in unset function. This fixes a failure I was having on t9130-git-svn-authors-file.sh on Solaris, and prevents several other issues from occurring. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-29Merge branch 'tr/maint-mailinfo'Libravatar Junio C Hamano1-2/+12
* tr/maint-mailinfo: mailinfo: with -b, keep space after [foo] am: learn passing -b to mailinfo Conflicts: git-am.sh
2012-01-16mailinfo: with -b, keep space after [foo]Libravatar Thomas Rast1-1/+1
The logic for the -b mode, where [PATCH] is dropped but [foo] is not, silently ate all spaces after the ]. Fix this by keeping the next isspace() character, if there is any. Being more thorough is pointless, as the later cleanup_space() call will normalize any sequence of whitespace to a single ' '. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-16am: learn passing -b to mailinfoLibravatar Thomas Rast1-2/+12
git-am could pass -k to mailinfo, but not -b. Introduce an option that does so. We change the meaning of the 'keep' state file, but are careful not to cause a problem unless you downgrade in the middle of an 'am' run. This uncovers a bug in mailinfo -b, hence the failing test. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-11am: ignore leading whitespace before patchLibravatar David Barr1-0/+18
Some web-based email clients prepend whitespace to raw message transcripts to workaround content-sniffing in some browsers. Adjust the patch format detection logic to ignore leading whitespace. So now you can apply patches from GMail with "git am" in three steps: 1. choose "show original" 2. tell the browser to "save as" (for example by pressing Ctrl+S) 3. run "git am" on the saved file This fixes a regression introduced by v1.6.4-rc0~15^2~2 (git-am foreign patch support: autodetect some patch formats, 2009-05-27). GMail support was first introduced to "git am" by v1.5.4-rc0~274^2 (Make mailsplit and mailinfo strip whitespace from the start of the input, 2007-11-01). Signed-off-by: David Barr <davidbarr@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-21i18n: git-am core say messagesLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Make the core git-am messages that use say() translatable. These are visible on almost every git am invocation. There are tests that depend on the "Applying" output that need to be changed to use the test_i18* functions along with this translation. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09tests: add missing &&Libravatar Jonathan Nieder1-1/+1
Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain. Commands intended to fail should be marked with !, test_must_fail, or test_might_fail. The examples in this patch do not require that. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-23Teach "apply --index-info" to handle rename patchesLibravatar Junio C Hamano1-0/+46
With v1.5.3.2~14 (apply --index-info: fall back to current index for mode changes, 2007-09-17), git apply learned to stop worrying about the lack of diff index line when a file already present in the current index had no content change. But it still worries too much: for rename patches, it is checking that both the old and new filename are present in the current index. This makes no sense, since a file rename generally involves creating a file there was none before. So just check the old filename. Noticed while trying to use “git rebase” with diff.renames = copies. [jn: add tests] Reported-by: David D. Kilzer <ddkilzer@kilzer.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-23t4150 (am): futureproof against failing testsLibravatar Jonathan Nieder1-1/+47
Most tests in t4150 begin by navigating to a sane state and applying some patch: git checkout first && git am patch1 If a previous test left behind unmerged files or a .git/rebase-apply directory, they are untouched and the test fails, causing later tests to fail, too. This is not a problem in practice because none of the tests leave a mess behind. But as a futureproofing measure, it is still best to avoid the problem and clean up at the start of each test. In particular, this simplifies the process of adding new tests that are known to fail. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-23t4150 (am): style fixLibravatar Jonathan Nieder1-108/+132
Place setup commands in test_expect_success blocks. This makes the rare event of the setup commands breaking on some platform easier to diagnose, and more importantly, it visually distinguishes where each test begins and ends. Instead of running test -z against the result of "git diff" command substitution, use "git diff --exit-code", to improve output when running with the "-v" option. Use test_cmp in place of "test $(foo) = $(bar)" for similar reasons. Remove whitespace after the > and < redirection operators for consistency with other tests. The order of arguments to test_cmp is "test_cmp expected actual". Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-26fix portability issues with $ in double quotesLibravatar Stephen Boyd1-3/+3
Using a dollar sign in double quotes isn't portable. Escape them with a backslash or replace the double quotes with single quotes. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-25am: fix patch format detection for Thunderbird "Save As" emailsLibravatar Stephen Boyd1-0/+15
The patch detection wants to inspect all the headers of a rfc2822 message and ensure that they look like header fields. The headers are always separated from the message body with a blank line. When Thunderbird saves the message the blank line separating the headers from the body includes a CR. The patch detection is failing because a CRLF doesn't match /^$/. Fix this by allowing a CR to exist on the separating line. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-06am: allow individual e-mail files as inputLibravatar Junio C Hamano1-0/+15
We traditionally allowed a mbox file or a directory name of a maildir (but never an individual file inside a maildir) to be given to "git am". Even though an individual file in a maildir (or more generally, a piece of RFC2822 e-mail) is not a mbox file, it contains enough information to create a commit out of it, so there is no reason to reject one. Running mailsplit on such a file feels stupid, but it does not hurt. This builds on top of a5a6755 (git-am foreign patch support: introduce patch_format, 2009-05-27) that introduced mailbox format detection. The codepath to deal with a mbox requires it to begin with "From " line and also allows it to begin with "From: ", but a random piece of e-mail can and often do begin with any valid RFC2822 header lines. Instead of checking the first line, we extract all the lines up to the first empty line, and make sure they look like e-mail headers. A test is added to t4150 to demonstrate this feature. Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-18am, rebase: teach quiet optionLibravatar Stephen Boyd1-0/+18
git-am and git-rebase are talkative scripts. Teach them to be quiet when told, allowing them to speak only when they fail or experience errors. The quiet option is maintained when git-am or git-rebase fails to apply a patch. This means subsequent --resolved, --continue, --skip, --abort invocations will be quiet if the original invocation was quiet. Drop a handful of >&2 redirection; the rest of the program sends all the info messages to stdout, not to stderr. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-18t4150: test applying with a newline in subjectLibravatar Stephen Boyd1-0/+8
Commit 4b7cc26 (git-am: use printf instead of echo on user-supplied strings, 2007-05-25) fixed a bug where subjects with newlines would cause git-am to echo multiple lines when it says "Applying: <subject>". This test ensures that fix stays valid. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>