summaryrefslogtreecommitdiff
path: root/t/t4103-apply-binary.sh
AgeCommit message (Collapse)AuthorFilesLines
2010-11-24Merge branch 'en/and-cascade-tests'Libravatar Junio C Hamano1-4/+4
* en/and-cascade-tests: (25 commits) t4124 (apply --whitespace): use test_might_fail t3404: do not use 'describe' to implement test_cmp_rev t3404 (rebase -i): introduce helper to check position of HEAD t3404 (rebase -i): move comment to description t3404 (rebase -i): unroll test_commit loops t3301 (notes): use test_expect_code for clarity t1400 (update-ref): use test_must_fail t1502 (rev-parse --parseopt): test exit code from "-h" t6022 (renaming merge): chain test commands with && test-lib: introduce test_line_count to measure files tests: add missing &&, batch 2 tests: add missing && Introduce sane_unset and use it to ensure proper && chaining t7800 (difftool): add missing && t7601 (merge-pull-config): add missing && t7001 (mv): add missing && t6016 (rev-list-graph-simplify-history): add missing && t5602 (clone-remote-exec): add missing && t4026 (color): remove unneeded and unchained command t4019 (diff-wserror): add lots of missing && ... Conflicts: t/t7006-pager.sh
2010-11-09tests: add missing &&Libravatar Jonathan Nieder1-4/+4
Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain. Commands intended to fail should be marked with !, test_must_fail, or test_might_fail. The examples in this patch do not require that. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-29apply: don't segfault on binary files with missing dataLibravatar Jeff King1-1/+26
Usually when applying a binary diff generated without --binary, it will be rejected early, as we don't even have the full sha1 of the pre- and post-images. However, if the diff is generated with --full-index (but not --binary), then we will actually try to apply it. If we have the postimage blob, then we can take a shortcut and never even look at the binary diff at all (e.g., this can happen when rebasing changes within a repository). If we don't have the postimage blob, though, we try to look at the actual fragments, of which there are none, and get a segfault. This patch checks explicitly for that case and complains to the user instead of segfaulting. We need to keep the check at a low level so that the "shortcut" case above continues to work. We also add a test that demonstrates the segfault. While we're at it, let's also explicitly test the shortcut case. Reported-by: Rafaël Carré <rafael.carre@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-20Use test_expect_success for test setupsLibravatar Brian Gernhardt1-17/+19
Several tests did not use test_expect_success for their setup commands. Putting these start commands into the testing framework means both that errors during setup will be caught quickly and that non-error text will be suppressed without -v. Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03tests: use "git xyzzy" form (t3600 - t6999)Libravatar Nanako Shiraishi1-13/+13
Converts tests between t3600-t6300. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-8/+8
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13more tr portability test script fixesLibravatar Jeff King1-2/+2
Dealing with NULs is not always safe with tr. On Solaris, incoming NULs are silently deleted by both the System V and UCB versions of tr. When converting to NULs, the System V version works fine, but the UCB version silently ignores the request to convert the character. This patch changes all instances of tr using NULs to use "perl -pe 'y///'" instead. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01Sane use of test_expect_failureLibravatar Junio C Hamano1-32/+36
Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-17the use of 'tr' in the test suite isn't really portableLibravatar H.Merijn Brand1-2/+2
Some versions of 'tr' only accept octal codes if entered with three digits, and therefor misinterpret the '\0' in the test suite. Some versions of 'tr' reject the (needless) use of character classes. Signed-off-by: H.Merijn Brand <h.m.brand@xs4all.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-26/+26
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2006-09-07Make apply --binary a no-op.Libravatar Junio C Hamano1-2/+2
Historically we did not allow binary patch applied without an explicit permission from the user, and this flag was the way to do so. This makes the flag a no-op by always allowing binary patch application. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-28t4103: fix binary patch application test.Libravatar Junio C Hamano1-2/+2
The generated binary patch was _not_ binary -- earlier I made the --full-index flag to imply binary patch generation to the diff machinery, but later we made it independent from --binary (although the latter implies the former). Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-19tests: make scripts executableLibravatar Junio C Hamano1-0/+0
just for consistency. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-16tests: binary diff application.Libravatar Junio C Hamano1-10/+39
This adds more tests to cover cases where binary diff application succeeds. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-16apply: allow-binary-replacement.Libravatar Junio C Hamano1-0/+8
A new option, --allow-binary-replacement, is introduced. When you feed a diff that records full SHA1 name of pre- and post-image blob on its index line to git-apply with this option, the post-image blob replaces the path if what you have in the working tree matches the pre-image _and_ post-image blob is already available in the object directory. Later we _might_ want to enhance the diff output to also include the full binary data of the post-image, to make this more useful, but this is good enough for local rebasing application. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-16git-apply: fail if a patch cannot be applied.Libravatar Junio C Hamano1-0/+78
Recently we fixed 'git-apply --stat' not to barf on a binary differences. But it accidentally broke the error detection when we actually attempt to apply them. This commit fixes the problem and adds test cases. Signed-off-by: Junio C Hamano <junkio@cox.net>