summaryrefslogtreecommitdiff
path: root/t/t4052-stat-output.sh
AgeCommit message (Collapse)AuthorFilesLines
2021-12-13t4000-t4999: detect and signal failure within loopLibravatar Eric Sunshine1-1/+1
Failures within `for` and `while` loops can go unnoticed if not detected and signaled manually since the loop itself does not abort when a contained command fails, nor will a failure necessarily be detected when the loop finishes since the loop returns the exit code of the last command it ran on the final iteration, which may not be the command which failed. Therefore, detect and signal failures manually within loops using the idiom `|| return 1` (or `|| exit 1` within subshells). Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19t4*: adjust the references to the default branch name "main"Libravatar Johannes Schindelin1-3/+3
Carefully excluding t4013 and t4015, which see independent development elsewhere at the time of writing, we use `main` as the default branch name in t4*. This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -- t4*.sh t4211/*.export && git checkout HEAD -- t4013\*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19tests: mark tests relying on the current default for `init.defaultBranch`Libravatar Johannes Schindelin1-0/+3
In addition to the manual adjustment to let the `linux-gcc` CI job run the test suite with `master` and then with `main`, this patch makes sure that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts that currently rely on the initial branch name being `master by default. To determine which test scripts to mark up, the first step was to force-set the default branch name to `master` in - all test scripts that contain the keyword `master`, - t4211, which expects `t/t4211/history.export` with a hard-coded ref to initialize the default branch, - t5560 because it sources `t/t556x_common` which uses `master`, - t8002 and t8012 because both source `t/annotate-tests.sh` which also uses `master`) This trick was performed by this command: $ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' $(git grep -l master t/t[0-9]*.sh) \ t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh After that, careful, manual inspection revealed that some of the test scripts containing the needle `master` do not actually rely on a specific default branch name: either they mention `master` only in a comment, or they initialize that branch specificially, or they do not actually refer to the current default branch. Therefore, the aforementioned modification was undone in those test scripts thusly: $ git checkout HEAD -- \ t/t0027-auto-crlf.sh t/t0060-path-utils.sh \ t/t1011-read-tree-sparse-checkout.sh \ t/t1305-config-include.sh t/t1309-early-config.sh \ t/t1402-check-ref-format.sh t/t1450-fsck.sh \ t/t2024-checkout-dwim.sh \ t/t2106-update-index-assume-unchanged.sh \ t/t3040-subprojects-basic.sh t/t3301-notes.sh \ t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \ t/t3436-rebase-more-options.sh \ t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \ t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \ t/t5511-refspec.sh t/t5526-fetch-submodules.sh \ t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \ t/t5548-push-porcelain.sh \ t/t5552-skipping-fetch-negotiator.sh \ t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \ t/t5614-clone-submodules-shallow.sh \ t/t7508-status.sh t/t7606-merge-custom.sh \ t/t9302-fast-import-unpack-limit.sh We excluded one set of test scripts in these commands, though: the range of `git p4` tests. The reason? `git p4` stores the (foreign) remote branch in the branch called `p4/master`, which is obviously not the default branch. Manual analysis revealed that only five of these tests actually require a specific default branch name to pass; They were modified thusly: $ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' t/t980[0167]*.sh t/t9811*.sh Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-13format-patch: respect --stat in cover letter's diffstatLibravatar Nguyễn Thái Ngọc Duy1-15/+33
Commit 43662b23ab (format-patch: keep cover-letter diffstat wrapped in 72 columns - 2018-01-24) uncondtionally sets stat width to 72 when generating diffstat for the cover letter, ignoring --stat from command line. But it should only do so when stat width is still default (i.e. stat_width == 0). In order to fix this, we should only set stat_width if stat_width is zero. But it will never be. Commit 071dd0ba43 (format-patch: reduce patch diffstat width to 72 - 2018-02-01) makes sure that default stat width will be 72 (ignoring $COLUMNS, but could still be overriden by --stat). So all we need to do here is drop the assignment. Reported-by: Laszlo Ersek <lersek@redhat.com> Helped-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-02format-patch: reduce patch diffstat width to 72Libravatar Nguyễn Thái Ngọc Duy1-15/+31
Patches generated by format-patch are meant to be exchanged as emails, most of the time. And since it's generally agreed that text in mails should be wrapped around 70 columns or so, make sure these diffstat follow the convention (especially when used with --cover-letter since we already defaults to wrapping 72 columns). The default can still be overriden with command line options. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-26Merge branch 'jk/test-chain-lint'Libravatar Junio C Hamano1-17/+17
People often forget to chain the commands in their test together with &&, leaving a failure from an earlier command in the test go unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to catch such a mistake more easily. * jk/test-chain-lint: (36 commits) t9001: drop save_confirm helper t0020: use test_* helpers instead of hand-rolled messages t: simplify loop exit-code status variables t: fix some trivial cases of ignored exit codes in loops t7701: fix ignored exit code inside loop t3305: fix ignored exit code inside loop t0020: fix ignored exit code inside loops perf-lib: fix ignored exit code inside loop t6039: fix broken && chain t9158, t9161: fix broken &&-chain in git-svn tests t9104: fix test for following larger parents t4104: drop hand-rolled error reporting t0005: fix broken &&-chains t7004: fix embedded single-quotes t0050: appease --chain-lint t9001: use test_when_finished t4117: use modern test_* helpers t6034: use modern test_* helpers t1301: use modern test_* helpers t0020: use modern test_* helpers ...
2015-03-20t: fix moderate &&-chain breakageLibravatar Jeff King1-17/+17
These are tests which are missing a link in their &&-chain, but in a way that probably does not effect the outcome of the test. Most of these are of the form: some_cmd >actual test_cmp expect actual The main point of the test is to verify the output, and a failure in some_cmd would probably be noticed by bogus output. But it is good for the tests to also confirm that "some_cmd" does not die unexpectedly after producing its output. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-19revision: forbid combining --graph and --no-walkLibravatar Dongcan Jiang1-7/+7
Because "--graph" is about connected history while --no-walk is about discrete points, it does not make sense to allow these two options at the same time. [1] This change makes a few calls to "show --graph" fail in t4052, but asking to show one commit with graph is a nonsensical thing to do. Thus, tests on "show --graph" in t4052 have been removed [2,3]. Same tests on "show" without --graph option have already been tested in 4052. 3 testcases have been added to test this patch. [1]: http://article.gmane.org/gmane.comp.version-control.git/216083 [2]: http://article.gmane.org/gmane.comp.version-control.git/264950 [3]: http://article.gmane.org/gmane.comp.version-control.git/265107 Helped-By: Eric Sunshine <sunshine@sunshineco.com> Helped-By: René Scharfe <l.s.r@web.de> Helped-By: Junio C Hamano <gitster@pobox.com> Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-02Merge branch 'zj/diff-stat-smaller-num-columns'Libravatar Junio C Hamano1-3/+3
Spend only minimum number of columns necessary to show the number of lines in the output from "diff --stat", instead of always allocating 4 columns even when showing changes that are much smaller than 1000 lines. By Zbigniew Jędrzejewski-Szmek * zj/diff-stat-smaller-num-columns: diff --stat: use less columns for change counts
2012-04-30diff --stat: use less columns for change countsLibravatar Zbigniew Jędrzejewski-Szmek1-3/+3
Number of columns required for change counts is now computed based on the maximum number of changed lines instead of being fixed. This means that usually a few more columns will be available for the filenames and the graph. The graph width logic is also modified to include enough space for "Bin XXX -> YYY bytes". If changes to binary files are mixed with changes to text files, change counts are padded to take at least three columns. And the other way around, if change counts require more than three columns, then "Bin"s are padded to align with the change count. This way, the +- part starts in the same column as "XXX -> YYY" part for binary files. This makes the graph easier to parse visually thanks to the empty column. This mimics the layout of diff --stat before this change. Tests and the tutorial are updated to reflect the new --stat output. This means either the removal of extra padding and/or the addition of up to three extra characters to truncated filenames. One test is added to check the graph alignment when a binary file change and text file change of more than 999 lines are committed together. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-27t4052: work around shells unable to set COLUMNS to 1Libravatar Zbigniew Jędrzejewski-Szmek1-2/+4
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-18Prevent graph_width of stat width from falling below minLibravatar Lucian Poston1-7/+7
Update tests in t4052 fixed by this change. Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-18t4052: Test diff-stat output with minimum columnsLibravatar Lucian Poston1-0/+28
When COLUMNS or --stat-width restricts the diff-stat width to near the minimum, 26 columns, the graph_width value becomes negative. Consequently, the graph part of diff-stat is not resized properly. Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-16t4052: Adjust --graph --stat output for prefixesLibravatar Lucian Poston1-9/+25
Adjust tests to verify that the commit history graph tree is taken into consideration when the diff stat output width is calculated. Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-16t4052: test --stat output with --graphLibravatar Zbigniew Jędrzejewski-Szmek1-4/+74
Add tests which show that the width of the --prefix added by --graph is not taken into consideration when the diff stat output width is calculated. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Lucian Poston <lucian.poston@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: add config option to limit graph widthLibravatar Zbigniew Jędrzejewski-Szmek1-0/+6
Config option diff.statGraphWidth=<width> is equivalent to --stat-graph-width=<width>, except that the config option is ignored by format-patch. For the graph-width limiting to be usable, it should happen 'automatically' once configured, hence the config option. Nevertheless, graph width limiting only makes sense when used on a wide terminal, so it should not influence the output of format-patch, which adheres to the 80-column standard. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: enable limiting of the graph partLibravatar Zbigniew Jędrzejewski-Szmek1-0/+6
A new option --stat-graph-width=<width> can be used to limit the width of the graph part even is more space is available. Up to <width> columns will be used for the graph. If commits changing a lot of lines are displayed in a wide terminal window (200 or more columns), and the +- graph uses the full width, the output can be hard to comfortably scan with a horizontal movement of human eyes. Messages wrapped to about 80 columns would be interspersed with very long +- lines. It makes sense to limit the width of the graph part to a fixed value (e.g. 70 columns), even if more columns are available. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: add a test for output with COLUMNS=40Libravatar Zbigniew Jędrzejewski-Szmek1-0/+19
In preparation for the introduction on the limit of the width of the graph part, a new test with COLUMNS=40 is added to check that the environment variable influences diff, show, log, but not format-patch. A new test is added because limiting the graph part makes COLUMNS=200 stop influencing diff --stat behaviour, which isn't wide enough now. The old test with COLUMNS=200 is retained to check for regressions. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: use a maximum of 5/8 for the filename partLibravatar Zbigniew Jędrzejewski-Szmek1-8/+8
The way that available columns are divided between the filename part and the graph part is modified to use as many columns as necessary for the filenames and the rest for the graph. If there isn't enough columns to print both the filename and the graph, at least 5/8 of available space is devoted to filenames. On a standard 80 column terminal, or if not connected to a terminal and using the default of 80 columns, this gives the same partition as before. The effect of this change is visible in the patch to the test vector in t4052; with a small change with long filename, it stops truncating the name part too short, and also allocates a bit more columns to the graph for larger changes. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01merge --stat: use the full terminal widthLibravatar Zbigniew Jędrzejewski-Szmek1-4/+4
Make merge --stat behave like diff --stat and use the full terminal width. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01log --stat: use the full terminal widthLibravatar Zbigniew Jędrzejewski-Szmek1-2/+2
Make log --stat behave like diff --stat and use the full terminal width. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01show --stat: use the full terminal widthLibravatar Zbigniew Jędrzejewski-Szmek1-2/+2
Make show --stat behave like diff --stat and use the full terminal width. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: use the full terminal widthLibravatar Zbigniew Jędrzejewski-Szmek1-2/+9
Default to the real terminal width for diff --stat output, instead of the hard-coded 80 columns. Some projects (especially in Java), have long filename paths, with nested directories or long individual filenames. When files are renamed, the filename part in stat output can be almost useless. If the middle part between { and } is long (because the file was moved to a completely different directory), then most of the path would be truncated. It makes sense to detect and use the full terminal width and display full filenames if possible. The are commands like diff, show, and log, which can adapt the output to the terminal width. There are also commands like format-patch, whose output should be independent of the terminal width. Since it is safer to use the 80-column default, the real terminal width is only used if requested by the calling code by setting diffopts.stat_width=-1. Normally this value is 0, and can be set by the user only to a non-negative value, so -1 is safe to use internally. This patch only changes the diff builtin to use the full terminal width. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: tests for long filenames and big change countsLibravatar Junio C Hamano1-0/+182
In preparation for updates to the "diff --stat" that updates the logic to split the allotted columns into the name part and the graph part to make the output more readable, add a handful of tests to document the corner case behaviour in which long filenames and big changes are shown. When a pathname is so long that it cannot fit on the column, the current code truncates it to make sure that the graph part has enough room to show a meaningful graph. If the actual change is small (e.g. only one line changed), this results in the final output that is shorter than the width we aim for. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>