summaryrefslogtreecommitdiff
path: root/t/t4049-diff-stat-count.sh
AgeCommit message (Collapse)AuthorFilesLines
2021-02-10tests: remove most uses of test_i18ncmpLibravatar Ævar Arnfjörð Bjarmason1-3/+3
As a follow-up to d162b25f956 (tests: remove support for GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp via a simple s/test_i18ncmp/test_cmp/g search-replacement. I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight changes between "master" and "seen", as well as the prerequisite itself due to other changes between "master" and "next/seen" which add new test_i18ncmp uses. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-3/+3
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-29t4049: refocus testsLibravatar Junio C Hamano1-11/+9
The primary thing Linus's patch wanted to change was to make sure that 0-line change appears for a mode-only change. Update the first test to chmod a file that we can see in the output (limited by --stat-count) to demonstrate it. Also make sure to use test_chmod and compare the index and the tree, so that we can run this test even on a filesystem without permission bits. Later two tests are about fixes to separate issues that were introduced and/or uncovered by Linus's patch as a side effect, but the issues are not related to mode-only changes. Remove chmod from the tests. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-27diff --stat: do not count "unmerged" entriesLibravatar Junio C Hamano1-1/+1
Even though we show a separate *UNMERGED* entry in the patch and diffstat output (or in the --raw format, for that matter) in addition to and separately from the diff against the specified stage (defaulting to #2) for unmerged paths, they should not be counted in the total number of files affected---that would lead to counting the same path twice. The separation done by the previous step makes this fix simple and straightforward. Among the filepairs in diff_queue, paths that weren't modified, and the extra "unmerged" entries do not count as total number of files. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-27diff --stat: move the "total count" logic to the last loopLibravatar Junio C Hamano1-1/+1
The diffstat generation logic, with --stat-count limit, is implemented as three loops. - The first counts the width necessary to show stats up to specified number of entries, and notes up to how many entries in the data we need to iterate to show the graph; - The second iterates that many times to draw the graph, adjusts the number of "total modified files", and counts the total added/deleted lines for the part that was shown in the graph; - The third iterates over the remainder and only does the part to count "total added/deleted lines" and to adjust "total modified files" without drawing anything. Move the logic to count added/deleted lines and modified files from the second loop to the third loop. This incidentally fixes a bug. The third loop was not filtering binary changes (counted in bytes) from the total added/deleted as it should. The second loop implemented this correctly, so if a binary change appeared earlier than the --stat-count cutoff, the code counted number of added/deleted lines correctly, but if it appeared beyond the cutoff, the number of lines would have mixed with the byte count in the buggy third loop. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-27test: add failing tests for "diff --stat" to t4049Libravatar Junio C Hamano1-1/+45
There are a few problems in diff.c around --stat area, partially caused by the recent 74faaa1 (Fix "git diff --stat" for interesting - but empty - file changes, 2012-10-17), and largely caused by the earlier change that introduced when --stat-count was added. Add a few test pieces to t4049 to expose the issues. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-17Fix "git diff --stat" for interesting - but empty - file changesLibravatar Linus Torvalds1-1/+2
The behavior of "git diff --stat" is rather odd for files that have zero lines of changes: it will discount them entirely unless they were renames. Which means that the stat output will simply not show files that only had "other" changes: they were created or deleted, or their mode was changed. Now, those changes do show up in the summary, but so do renames, so the diffstat logic is inconsistent. Why does it show renames with zero lines changed, but not mode changes or added files with zero lines changed? So change the logic to not check for "is_renamed", but for "is_interesting" instead, where "interesting" is judged to be any action but a pure data change (because a pure data change with zero data changed really isn't worth showing, if we ever get one in our diffpairs). So if you did chmod +x Makefile git diff --stat before, it would show empty (" 0 files changed"), with this it shows Makefile | 0 1 file changed, 0 insertions(+), 0 deletions(-) which I think is a more correct diffstat (and then with "--summary" it shows *what* the metadata change to Makefile was - this is completely consistent with our handling of renamed files). Side note: the old behavior was *really* odd. With no changes at all, "git diff --stat" output was empty. With just a chmod, it said "0 files changed". No way is our legacy behavior sane. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-30diff --stat: use less columns for change countsLibravatar Zbigniew Jędrzejewski-Szmek1-2/+2
Number of columns required for change counts is now computed based on the maximum number of changed lines instead of being fixed. This means that usually a few more columns will be available for the filenames and the graph. The graph width logic is also modified to include enough space for "Bin XXX -> YYY bytes". If changes to binary files are mixed with changes to text files, change counts are padded to take at least three columns. And the other way around, if change counts require more than three columns, then "Bin"s are padded to align with the change count. This way, the +- part starts in the same column as "XXX -> YYY" part for binary files. This makes the graph easier to parse visually thanks to the empty column. This mimics the layout of diff --stat before this change. Tests and the tutorial are updated to reflect the new --stat output. This means either the removal of extra padding and/or the addition of up to three extra characters to truncated filenames. One test is added to check the graph alignment when a binary file change and text file change of more than 999 lines are committed together. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-13test: use test_i18ncmp when checking --stat outputLibravatar Jonathan Nieder1-1/+1
Ever since v1.7.9.2~13 (2012-02-01), git's diffstat-style summary line produced by "git apply --stat", "git diff --stat", and "git commit" varies by locale, producing test failures when GETTEXT_POISON is set. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-03Use correct grammar in diffstat summary lineLibravatar Nguyễn Thái Ngọc Duy1-1/+1
"git diff --stat" and "git apply --stat" now learn to print the line "%d files changed, %d insertions(+), %d deletions(-)" in singular form whenever applicable. "0 insertions" and "0 deletions" are also omitted unless they are both zero. This matches how versions of "diffstat" that are not prehistoric produced their output, and also makes this line translatable. [jc: with help from Thomas Dickey in archaeology of "diffstat"] [jc: squashed Jonathan's updates to illustrations in tutorials and a test] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-27diff --stat-count: finishing touchesLibravatar Junio C Hamano1-0/+25
Signed-off-by: Junio C Hamano <gitster@pobox.com>