summaryrefslogtreecommitdiff
path: root/t/t4047-diff-dirstat.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-08-21tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'Libravatar SZEDER Gábor1-2/+2
Using 'test_must_be_empty' is more idiomatic than 'test_cmp /dev/null out', and its message on error is perhaps a bit more to the point. This patch was basically created by running: sed -i -e 's%test_cmp /dev/null%test_must_be_empty%' t[0-9]*.sh with the exception of the change in 'should not fail in an empty repo' in 't7401-submodule-summary.sh', where it was 'test_cmp output /dev/null'. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-25diff: activate diff.renames by defaultLibravatar Matthieu Moy1-1/+2
Rename detection is a very convenient feature, and new users shouldn't have to dig in the documentation to benefit from it. Potential objections to activating rename detection are that it sometimes fail, and it is sometimes slow. But rename detection is already activated by default in several cases like "git status" and "git merge", so activating diff.renames does not fundamentally change the situation. When the rename detection fails, it now fails consistently between "git diff" and "git status". This setting does not affect plumbing commands, hence well-written scripts will not be affected. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix severe &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, in a location which causes a significant portion of the test to be missed (e.g., the test effectively does nothing, or consists of a long string of actions and output comparisons, and we throw away the exit code of at least one part of the string). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-02diff --shortstat --dirstat: remove duplicate outputLibravatar Mårten Kongstad1-0/+14
When --shortstat is used in conjunction with --dirstat=changes, git diff will output the dirstat information twice: first as calculated by the 'lines' algorithm, then as calculated by the 'changes' algorithm: $ git diff --dirstat=changes,10 --shortstat v2.2.0..v2.2.1 23 files changed, 453 insertions(+), 54 deletions(-) 33.5% Documentation/RelNotes/ 26.2% t/ 46.6% Documentation/RelNotes/ 16.6% t/ The same duplication happens for --shortstat together with --dirstat=files, but not for --shortstat together with --dirstat=lines. Limit output to only include one dirstat part, calculated as specified by the --dirstat parameter. Also, add test for this. Signed-off-by: Mårten Kongstad <marten.kongstad@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-13diffstat summary line varies by locale: miscellanyLibravatar Jonathan Nieder1-36/+33
These changes are in the same spirit as the six patches that precede them, but they haven't been split into individually justifiable patches yet. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29Mark dirstat error messages for translationLibravatar Johan Herland1-11/+11
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29Improve error handling when parsing dirstat parametersLibravatar Johan Herland1-0/+37
When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29New --dirstat=lines mode, doing dirstat analysis based on diffstatLibravatar Johan Herland1-0/+100
This patch adds an alternative implementation of show_dirstat(), called show_dirstat_by_line(), which uses the more expensive diffstat analysis (as opposed to show_dirstat()'s own (relatively inexpensive) analysis) to derive the numbers from which the --dirstat output is computed. The alternative implementation is controlled by the new "lines" parameter to the --dirstat option (or the diff.dirstat config variable). For binary files, the diffstat analysis counts bytes instead of lines, so to prevent binary files from dominating the dirstat results, the byte counts for binary files are divided by 64 before being compared to their textual/line-based counterparts. This is a stupid and ugly - but very cheap - heuristic. In linux-2.6.git, running the three different --dirstat modes: time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null yields the following average runtimes on my machine: - "changes" (default): ~6.0 s - "lines": ~9.6 s - "files": ~0.1 s So, as expected, there's a considerable performance hit (~60%) by going through the full diffstat analysis as compared to the default "changes" analysis (obviously, "files" is much faster than both). As such, the "lines" mode is probably only useful if you really need the --dirstat numbers to be consistent with the numbers returned from the other --*stat options. The patch also includes documentation and tests for the new dirstat mode. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29Allow specifying --dirstat cut-off percentage as a floating point numberLibravatar Johan Herland1-0/+64
Only the first digit after the decimal point is kept, as the dirstat calculations all happen in permille. Selftests verifying floating-point percentage input has been added. Improved-by: Junio C Hamano <gitster@pobox.com> Improved-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29Add config variable for specifying default --dirstat behaviorLibravatar Johan Herland1-0/+72
The new diff.dirstat config variable takes the same arguments as '--dirstat=<args>', and specifies the default arguments for --dirstat. The config is obviously overridden by --dirstat arguments passed on the command line. When not specified, the --dirstat defaults are 'changes,noncumulative,3'. The patch also adds several tests verifying the interaction between the diff.dirstat config variable, and the --dirstat command line option. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-fileLibravatar Johan Herland1-1/+122
Instead of having multiple interconnected dirstat-related options, teach the --dirstat option itself to accept all behavior modifiers as parameters. - Preserve the current --dirstat=<limit> (where <limit> is an integer specifying a cut-off percentage) - Add --dirstat=cumulative, replacing --cumulative - Add --dirstat=files, replacing --dirstat-by-file - Also add --dirstat=changes and --dirstat=noncumulative for specifying the current default behavior. These allow the user to reset other --dirstat parameters (e.g. 'cumulative' and 'files') occuring earlier on the command line. The deprecated options (--cumulative and --dirstat-by-file) are still functional, although they have been removed from the documentation. Allow multiple parameters to be separated by commas, e.g.: --dirstat=files,10,cumulative Update the documentation accordingly, and add testcases verifying the behavior of the new syntax. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29Make --dirstat=0 output directories that contribute < 0.1% of changesLibravatar Johan Herland1-2/+2
The expected output from --dirstat=0, is to include any directory with changes, even if those changes contribute a minuscule portion of the total changes. However, currently, directories that contribute less than 0.1% are not included, since their 'permille' value is 0, and there is an 'if (permille)' check in gather_dirstat() that causes them to be ignored. This test is obviously intended to exclude directories that contribute no changes whatsoever, but in this case, it hits too broadly. The correct check is against 'this_dir' from which the permille is calculated. Only if this value is 0 does the directory truly contribute no changes, and should be skipped from the output. This patches fixes this issue, and updates corresponding testcases to expect the new behvaior. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29Add several testcases for --dirstat and friendsLibravatar Johan Herland1-0/+585
Currently, t4013 is the only selftest that exercises the --dirstat machinery, but it only does a superficial verification of --dirstat's output. This patch adds a new selftest - t4047-diff-dirstat.sh - which prepares a commit containing: - unchanged files, changed files and files with rearranged lines - copied files, moved files, and unmoved files It then verifies the correct dirstat output for that commit in the following dirstat modes: - --dirstat - -X - --dirstat=0 - -X0 - --cumulative - --dirstat-by-file - (plus combinations of the above) Each of the above tests are also run with: - no rename detection - rename detection (-M) - expensive copy detection (-C -C) Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>