| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
|
|
There are three ways to specify an external diff command:
GIT_EXTERNAL_DIFF in the environment, diff.external in the
config, or a "diff" gitattribute. The current order of
precedence is:
1. gitattribute
2. GIT_EXTERNAL_DIFF
3. diff.external
Usually our rule is that environment variables should take
precedence over on-disk config (i.e., option 2 should come
before option 1). However, this situation is trickier than
some, because option 1 is more specific to the individual
file than option 2 (which affects all files), so it might be
preferable. So the current behavior can be seen as
implementing "do the specific thing if we can, but fall back
to this general thing".
This is probably not what we would do if we were writing git
from scratch, but it has been this way for several years,
and is not worth changing. So let's at least document that
this is the way it's supposed to work with a test.
While we're there, let's also make sure that diff.external
(which was not previously tested at all) works by running it
through the same tests as GIT_EXTERNAL_DIFF.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Upon seeing a type-change filepair, "diff --no-ext-diff" does not
show the usual "deletion followed by addition" split patch and does
not run the external diff driver either.
This is because the logic to disable external diff was placed at a
wrong level in the callchain. run_diff_cmd() decides to show the
split patch only when external diff driver is not configured or
specified via GIT_EXTERNAL_DIFF environment, but this is done before
checking if --no-ext-diff was given. To make things worse,
run_diff_cmd() checks --no-ext-diff and disables the output for such
a filepair completely, as the callchain below it (e.g. builtin_diff)
does not want to handle typechange filepairs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise it will be split at a space after "Program" when it is set
to "\\Program Files\perl" or something silly like that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
GIT-BUILD-OPTIONS defines PERL_PATH to be used in the test suite. Only a
few tests already actually use this variable when perl is needed. The
other test just call 'perl' and it might happen that the wrong perl
interpreter is used.
This becomes problematic on Windows, when the perl interpreter that is
compiled and installed on the Windows system is used, because this perl
interpreter might introduce some unexpected LF->CRLF conversions.
This patch makes sure that $PERL_PATH is used everywhere in the test suite
and that the correct perl interpreter is used.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no need to duplicate the definition of $_z40 and $_x40 that
test-lib.sh supplies the test scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The $TEST_DIRECTORY variable allows tests to find the
top-level test directory regardless of the current working
directory.
In the past, this has been used to accomodate tests which
change directories, but it is also the first step to being
able to move trash directories outside of the
$TEST_DIRECTORY hierarchy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Naturally, prep_temp_blob() did not care about filenames.
As a result, GIT_EXTERNAL_DIFF and textconv generated
filenames such as ".diff_XXXXXX".
This modifies prep_temp_blob() to generate user-friendly
filenames when creating temporary files.
Diffing "name.ext" now generates "XXXXXX_name.ext".
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-1.6.0-diff-borrow-carefully:
diff --cached: do not borrow from a work tree when a path is marked as assume-unchanged
|
|
assume-unchanged
When the index says that the file in the work tree that corresponds to the
blob object that is used for comparison is known to be unchanged, "diff"
reads from the file and applies convert_to_git(), instead of inflating the
object, to feed the internal diff engine with, because an earlier
benchnark found that it tends to be faster to use this optimization.
However, the index can lie when the path is marked as assume-unchanged.
Disable the optimization for such paths.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When preparing temporary files for an external diff or textconv, it is
easier on the external tools, especially when they are implemented using
platform tools, if they are fed the input after convert_to_working_tree().
This fixes msysGit issue 177.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there is more than one file that are changed, running git diff with
GIT_EXTERNAL_DIFF incorrectly diagnoses an programming error and dies.
The check introduced in 479b0ae (diff: refactor tempfile cleanup handling,
2009-01-22) to detect a temporary file slot that forgot to remove its
temporary file was inconsistent with the way the codepath to remove the
temporary to mark the slot that it is done with it.
This patch fixes this problem and adds a test case for it.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Teach "git diff" to honour --[no-]ext-diff
|
|
The original intention of 72909be (Add diff-option --ext-diff, 2007-06-30)
was to optionally allow the use of external diff viewer in "git log"
family (while keeping them disabled by default). It exposed the "allow
external diff" bit to the UI, but forgot to adjust the "git diff" codepath
that was set up to always allow use of the external diff viewer.
Noticed by Nazri Ramliy; tests by René Scharfe squashed in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Solaris /usr/bin/grep doesn't understand "-a". In this case
we can just include the expected output with the test, which
is a better test anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dealing with NULs is not always safe with tr. On Solaris,
incoming NULs are silently deleted by both the System V and
UCB versions of tr. When converting to NULs, the System V
version works fine, but the UCB version silently ignores the
request to convert the character.
This patch changes all instances of tr using NULs to use
"perl -pe 'y///'" instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some versions of 'tr' only accept octal codes if entered with three digits,
and therefor misinterpret the '\0' in the test suite.
Some versions of 'tr' reject the (needless) use of character classes.
Signed-off-by: H.Merijn Brand <h.m.brand@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code shuffling mistakenly lost binariness specified with the
attribute mecahnism and made it always guess from the data.
Noticed by Johannes, with two test cases to t4020.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This enhances the attributes mechanism so that external programs
meant for existing GIT_EXTERNAL_DIFF interface can be specifed
per path.
To configure such a custom diff driver, first define a custom
diff driver in the configuration:
[diff "my-c-diff"]
command = <<your command string comes here>>
Then mark the paths that you want to use this custom driver
using the attribute mechanism.
*.c diff=my-c-diff
The intent of this separation is that the attribute mechanism is
used for specifying the type of the contents, while the
configuration mechanism is used to define what needs to be done
to that type of the contents, which would be specific to both
platform and personal taste.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Jeff King
Vincent van Ravesteijn
David Aguilar
Johannes Schindelin
Nazri Ramliy
H.Merijn Brand
Junio C Hamano