| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The format.useAutoBase configuration option exists to allow users to
enable '--base=auto' for format-patch by default.
This can sometimes lead to poor workflow, due to unexpected failures
when attempting to format an ancient patch:
$ git format-patch -1 <an old commit>
fatal: base commit shouldn't be in revision list
This can be very confusing, as it is not necessarily immediately obvious
that the user requested a --base (since this was in the configuration,
not on the command line).
We do want --base=auto to fail when it cannot provide a suitable base,
as it would be equally confusing if a formatted patch did not include
the base information when it was requested.
Teach format.useAutoBase a new mode, "whenAble". This mode will cause
format-patch to attempt to include a base commit when it can. However,
if no valid base commit can be found, then format-patch will continue
formatting the patch without a base commit.
In order to avoid making yet another branch name unusable with --base,
do not teach --base=whenAble or --base=whenable.
Instead, refactor the base_commit option to use a callback, and rely on
the global configuration variable auto_base.
This does mean that a user cannot request this optional base commit
generation from the command line. However, this is likely not too
valuable. If the user requests base information manually, they will be
immediately informed of the failure to acquire a suitable base commit.
This allows the user to make an informed choice about whether to
continue the format.
Add tests to cover the new mode of operation for --base.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A branch name used in a test has been clarified to match what is
going on.
* pb/t4014-unslave:
t4014: do not use "slave branch" nomenclature
|
|
Git branches have been qualified as topic branches, integration branches,
development branches, feature branches, release branches and so on.
Git has a branch that is the master *for* development, but it is not
the master *of* any "slave branch": Git does not have slave branches,
and has never had, except for a single testcase that claims otherwise. :)
Independent of any future change to the naming of the "master" branch,
removing this sole appearance of the term is a strict improvement: it
avoids divisive language, and talking about "feature branch" clarifies
which developer workflow the test is trying to emulate.
Reported-by: Till Maas <tmaas@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `diff.relative` boolean option set to `true` shows only changes in
the current directory/value specified by the `path` argument of the
`relative` option and shows pathnames relative to the aforementioned
directory.
Teach `--no-relative` to override earlier `--relative`
Add for git-format-patch(1) options documentation `--relative` and
`--no-relative`
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Acked-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commit subjects or authors have non-ASCII characters, git
format-patch Q-encodes them so they can be safely sent over email.
However, if the patch transfer method is something other than email (web
review tools, sneakernet), this only serves to make the patch metadata
harder to read without first applying it (unless you can decode RFC 2047
in your head). git am as well as some email software supports
non-Q-encoded mail as described in RFC 6531.
Add --[no-]encode-email-headers and format.encodeEmailHeaders to let the
user control this behavior.
Signed-off-by: Emma Brooks <me@pluvano.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" can take a set of configured format.notes values
to specify which notes refs to use in the log message part of the
output. The behaviour of this was not consistent with multiple
--notes command line options, which has been corrected.
* dl/format-patch-notes-config-fixup:
notes.h: fix typos in comment
notes: break set_display_notes() into smaller functions
config/format.txt: clarify behavior of multiple format.notes
format-patch: move git_config() before repo_init_revisions()
format-patch: use --notes behavior for format.notes
notes: extract logic into set_display_notes()
notes: create init_display_notes() helper
notes: rename to load_display_notes()
|
|
When we had multiple `format.notes` config values where we had `<ref1>`,
`false`, `<ref2>` (in that order), then we would print out the notes for
both `<ref1>` and `<ref2>`. This doesn't make sense, however, since we
parse the config in a top-down manner and a `false` should be able to
override previous configurations, just like how `--no-notes` will
override previous `--notes`.
Duplicate the logic that handles the `--[no-]notes[=]` option to
`format.notes` for consistency. As a result, when parsing the config
from top to bottom, `format.notes = true` will behave like `--notes`,
`format.notes = <ref>` will behave like `--notes=<ref>` and
`format.notes = false` will behave like `--no-notes`.
This change isn't strictly backwards compatible but since it is an edge
case where a sane user would not mix notes refs with `false` and this
feature is relatively new (released only in v2.23.0), this change should
be harmless.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If `format.useAutoBase = true`, there was no way to override this from
the command-line. Teach the `--no-base` option in format-patch to
override `format.useAutoBase`.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of manually unsetting the config after the test case is done,
use test_config() to do it automatically. While we're at it, fix a typo
in a test case name.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The branch description ("git branch --edit-description") has been
used to fill the body of the cover letters by the format-patch
command; this has been enhanced so that the subject can also be
filled.
* dl/format-patch-cover-from-desc:
format-patch: teach --cover-from-description option
format-patch: use enum variables
format-patch: replace erroneous and condition
|
|
Test update.
* bw/format-patch-o-create-leading-dirs:
t4014: make output-directory tests self-contained
|
|
As noted by Gábor in [1], the new tests in edefc31873 ("format-patch:
create leading components of output directory", 2019-10-11) cannot be
run independently. Fix this.
[1] https://public-inbox.org/git/20191011144650.GM29845@szeder.dev/
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>"
not "mkdir -p <outdir>", which is being corrected.
* bw/format-patch-o-create-leading-dirs:
format-patch: create leading components of output directory
|
|
Before, when format-patch generated a cover letter, only the body would
be populated with a branch's description while the subject would be
populated with placeholder text. However, users may want to have the
subject of their cover letter automatically populated in the same way.
Teach format-patch to accept the `--cover-from-description` option and
corresponding `format.coverFromDescription` config, allowing users to
populate different parts of the cover letter (including the subject
now).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git format-patch -o <outdir>' did an equivalent of 'mkdir <outdir>'
not 'mkdir -p <outdir>', which is being corrected.
Avoid the usage of 'adjust_shared_perm' on the leading directories which
may have security implications. Achieved by temporarily disabling of
'config.sharedRepository' like 'git init' does.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 6bd26f58ea (t4014: use test_line_count() where possible, 2019-08-27),
we converted many test cases to take advantage of the test_line_count()
function. In one conversion, we inverted the expected and actual value
as tested by test_line_count(). Although functionally correct, if
format-patch ever produced incorrect output, the debugging output would
be a bunch of hashes which would be difficult to debug.
Invert the expected and actual values provided to test_line_count() so
that if format-patch produces incorrect output, the debugging output
will be a list of human-readable files instead.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, there are two ways where the return codes of Git commands are
lost. The first way is when a command is in the upstream of a pipe. In a
pipe, only the return code of the last command is used. Thus, all other
commands will have their return codes masked. Rewrite pipes so that
there are no Git commands upstream.
The other way is when a command is in a non-assignment subshell. The
return code will be lost in favour of the surrounding command's. Rewrite
instances of this such that Git commands output to a file and
surrounding commands only call subshells with non-Git commands.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In check_threading(), there was a Git command in the upstream of a pipe.
In order to not lose its status code, it was saved into a file. However,
this may be confusing so rewrite to redirect IO to file. This allows us
to directly use the conventional &&-chain.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert all instances of `cnt=$(... | wc -l) && test $cnt = N` into uses
of `test_line_count()`.
While we're at it, convert one instance of a Git command upstream of a
pipe into two commands. This prevents a failure of a Git command from
being masked since only the return code of the last member of the pipe
is shown.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, we were using a redirection operator to feed input into
sed. However, since sed is capable of opening its own files, make sed
open its own files instead of redirecting input into it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since output is silenced when running without `-v` and debugging output
is useful with `-v`, remove redirections to /dev/null as it is not
useful.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convention is to use indentable here-docs within test cases so that
the here-docs line up with the rest of the code within the test case.
Change here-docs from `<<\EOF` to `<<-\EOF` so that they can be indented
along with the rest of the test case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For shell scripts, the usual convention is for there to be no space
after redirection operators, (e.g. `>file`, not `> file`). Remove these
spaces wherever they appear.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The usual convention is for test case names to be written between
single-quotes. Change all double-quoted test case names to single-quotes
except for one test case name that uses a sq for a contraction.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The usual convention for test cases is for the closing sq to be on its
own line. Move the sq onto its own line for cases that do not conform to
this style.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For test cases, the usual convention is to name expected output files
"expect", not "expected". Replace all instances of "expected" with
"expect", except for one case where the "expected" is used as the name
of a test case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" learns a configuration to set the default for
its --notes=<ref> option.
* dl/format-patch-notes-config:
format-patch: teach format.notes config option
git-format-patch.txt: document --no-notes option
|
|
In git-format-patch, notes can be appended with the `--notes` option.
However, this must be specified by the user on an
invocation-by-invocation basis. If a user is not careful, it's possible
that they may forget to include it and generate a patch series without
notes.
Teach git-format-patch the `format.notes` config option. Its value is a
notes ref that will be automatically appended. The special value of
"standard" can be used to specify the standard notes. This option is
overridable with the `--no-notes` option in case a user wishes not to
append notes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We weren't flushing the context each time we processed a hunk in the
patch-id generation code in diff.c, but we were doing that when we
generated "stable" patch-ids with the 'patch-id' tool. Let's port that
similar logic over from patch-id.c into diff.c so we can get the same
hash when we're generating patch-ids for 'format-patch --base=' types of
command invocations.
Cc: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I tried out 'git format-patch --base' with a set of commits that
modifies more than one file. It turns out that the way this command is
implemented it actually uses the unstable version of patch-id instead of
the stable version that's documented. When I tried to modify the
existing test to use 'git patch-id --stable' vs. 'git patch-id
--unstable' I found that it didn't matter, the test still passed.
Let's expand on the test here so it is a little more complicated and
then use that to show that the patch-id generation is actually unstable
vs. stable. Update the documentation as well.
Cc: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The make_cover_letter() function is supposed to open a new file for
writing, and let the caller write into it via FILE *rev->diffopt.file
but because the function does not return anything, the caller does not
bother checking the return value.
Make sure it dies, instead of keep going with a NULL output
filestream and relying on it to cause a crash, when it fails to
open the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of an interdiff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert an interdiff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --interdiff=<prev>" to insert an
interdiff into the commentary section of a lone patch rather than
requiring a cover letter. The interdiff is indented to avoid confusing
git-am and human readers into considering it part of the patch proper.
Implementation note: Generating an interdiff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the interdiff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --interdiff option introduces the embedded interdiff generically as
"Interdiff:", however, we can do better when --reroll-count is specified
by emitting "Interdiff against v{n}:" instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When submitting a revised version of a patch series, it can be helpful
(to reviewers) to include a summary of changes since the previous
attempt in the form of an interdiff, however, doing so involves manually
copy/pasting the diff into the cover letter.
Add an --interdiff option to automate this process. The argument to
--interdiff specifies the tip of the previous attempt against which to
generate the interdiff. For example:
git format-patch --cover-letter --interdiff=v1 -3 v2
The previous attempt and the patch series being formatted must share a
common base.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently added "--base" option to "git format-patch" command did
not correctly generate prereq patch ids.
* xy/format-patch-prereq-patch-id-fix:
format-patch: clear UNINTERESTING flag before prepare_bases
|
|
When users specify the commit range with 'Z..C' pattern for format-patch, all
the parents of Z (including Z) would be marked as UNINTERESTING which would
prevent revision walk in prepare_bases from getting the prerequisite commits,
thus `git format-patch --base <base_commit_sha> Z..C` won't be able to generate
the list of prerequisite patch ids. Clear UNINTERESTING flag with
clear_object_flags solves this issue.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many tests hardcode the raw object names, which would change once
we migrate away from SHA-1. While some of them must test against
exact object names, most of them do not have to use hardcoded
constants in the test. The latter kind of tests have been updated
to test the moral equivalent of the original without hardcoding the
actual object names.
* bc/hash-independent-tests: (28 commits)
t5300: abstract away SHA-1-specific constants
t4208: abstract away SHA-1-specific constants
t4045: abstract away SHA-1-specific constants
t4042: abstract away SHA-1-specific constants
t4205: sort log output in a hash-independent way
t/lib-diff-alternative: abstract away SHA-1-specific constants
t4030: abstract away SHA-1-specific constants
t4029: abstract away SHA-1-specific constants
t4029: fix test indentation
t4022: abstract away SHA-1-specific constants
t4020: abstract away SHA-1-specific constants
t4014: abstract away SHA-1-specific constants
t4008: abstract away SHA-1-specific constants
t4007: abstract away SHA-1-specific constants
t3905: abstract away SHA-1-specific constants
t3702: abstract away SHA-1-specific constants
t3103: abstract away SHA-1-specific constants
t2203: abstract away SHA-1-specific constants
t: skip pack tests if not using SHA-1
t4044: skip test if not using SHA-1
...
|
|
Adjust the test so that it computes values for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_x40/$OID_REGEX/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_z40/$ZERO_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When formatting a series of patches using --attach and --cover-letter,
the cover letter lacks the closing MIME boundary, violating RFC 2046.
Certain clients, such as Thunderbird, discard the message body in such a
case.
Since the cover letter is just one part and sending it as
multipart/mixed is not very useful, always emit it as text/plain,
avoiding the boundary problem altogether.
Reported-by: Patrick Hemmer <git@stormcloud9.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sequencer use trailer.c's trailer layout definition, as opposed to
parsing the footer by itself. This makes "commit -s", "cherry-pick -x",
and "format-patch --signoff" consistent with trailer, allowing
non-trailer lines and multiple-line trailers in trailer blocks under
certain conditions, and therefore suppressing the extra newline in those
cases.
Consistency with trailer extends to respecting trailer configs. Tests
have been included to show that.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some projects, it is common to use "[RFC PATCH]" as the subject
prefix for a patch meant for discussion rather than application. A
new option "--rfc" was a short-hand for "--subject-prefix=RFC PATCH"
to help the participants of such projects.
* jt/format-patch-rfc:
format-patch: add "--rfc" for the common case of [RFC PATCH]
|
|
Add an alias for --subject-prefix='RFC PATCH', which is used
commonly in some development communities to deserve such a
short-hand.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Any text below the "-- " for the email signature gets treated as part of
the signature, and many mail clients will trim it from the quoted text
for a reply. Move it above the signature, so people can reply to it
more easily.
Similarly, when producing the patch as a MIME attachment, the
original code placed the base info after the attached part, which
would be discarded. Move the base info to the end of the part,
still inside the part boundary.
Add tests for the exact format of the email signature, and add tests
to ensure that the base info appears before the email signature when
producing a plain-text output, and that it appears before the part
boundary when producing a MIME attachment.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" learned format.from configuration variable to
specify the default settings for its "--from" option.
* jt/format-patch-from-config:
format-patch: format.from gives the default for --from
|
|
This helps users who would prefer format-patch to default to --from,
and makes it easier to change the default in the future.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach format-patch and mailsplit (hence "am") how a line that
happens to begin with "From " in the e-mail message is quoted with
">", so that these lines can be restored to their original shape.
* ew/mboxrd-format-am:
am: support --patch-format=mboxrd
mailsplit: support unescaping mboxrd messages
pretty: support "mboxrd" output format
|
|
test fixes.
* jk/shell-portability:
t5500 & t7403: lose bash-ism "local"
test-lib: add in-shell "env" replacement
|
Jacob Keller
Junio C Hamano
Paolo Bonzini
Laurent Arnoud
Emma Brooks
Denton Liu
Bert Wesarg
Stephen Boyd
Eric Sunshine
Xiaolong Ye
brian m. carlson
Jonathan Tan
Josh Triplett