| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make sequencer use trailer.c's trailer layout definition, as opposed to
parsing the footer by itself. This makes "commit -s", "cherry-pick -x",
and "format-patch --signoff" consistent with trailer, allowing
non-trailer lines and multiple-line trailers in trailer blocks under
certain conditions, and therefore suppressing the extra newline in those
cases.
Consistency with trailer extends to respecting trailer configs. Tests
have been included to show that.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some projects, it is common to use "[RFC PATCH]" as the subject
prefix for a patch meant for discussion rather than application. A
new option "--rfc" was a short-hand for "--subject-prefix=RFC PATCH"
to help the participants of such projects.
* jt/format-patch-rfc:
format-patch: add "--rfc" for the common case of [RFC PATCH]
|
|
Add an alias for --subject-prefix='RFC PATCH', which is used
commonly in some development communities to deserve such a
short-hand.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Any text below the "-- " for the email signature gets treated as part of
the signature, and many mail clients will trim it from the quoted text
for a reply. Move it above the signature, so people can reply to it
more easily.
Similarly, when producing the patch as a MIME attachment, the
original code placed the base info after the attached part, which
would be discarded. Move the base info to the end of the part,
still inside the part boundary.
Add tests for the exact format of the email signature, and add tests
to ensure that the base info appears before the email signature when
producing a plain-text output, and that it appears before the part
boundary when producing a MIME attachment.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" learned format.from configuration variable to
specify the default settings for its "--from" option.
* jt/format-patch-from-config:
format-patch: format.from gives the default for --from
|
|
This helps users who would prefer format-patch to default to --from,
and makes it easier to change the default in the future.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach format-patch and mailsplit (hence "am") how a line that
happens to begin with "From " in the e-mail message is quoted with
">", so that these lines can be restored to their original shape.
* ew/mboxrd-format-am:
am: support --patch-format=mboxrd
mailsplit: support unescaping mboxrd messages
pretty: support "mboxrd" output format
|
|
test fixes.
* jk/shell-portability:
t5500 & t7403: lose bash-ism "local"
test-lib: add in-shell "env" replacement
|
|
This output format prevents format-patch output from breaking
readers if somebody copy+pasted an mbox into a commit message.
Unlike the traditional "mboxo" format, "mboxrd" is designed to
be fully-reversible. "mboxrd" also gracefully degrades to
showing extra ">" in existing "mboxo" readers.
This degradation is preferable to breaking message splitting
completely, a problem I've seen in "mboxcl" due to having
multiple, non-existent, or inaccurate Content-Length headers.
"mboxcl2" is a non-starter since it's inherits the problems
of "mboxcl" while being completely incompatible with existing
tooling based around mailsplit.
ref: http://homepage.ntlworld.com/jonathan.deboynepollard/FGA/mail-mbox-formats.html
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The one-shot environment variable syntax:
FOO=BAR some-program
is unportable when some-program is actually a shell
function, like test_must_fail (on some shells FOO remains
set after the function returns, and on others it does not).
We sometimes get around this by using env, like:
test_must_fail env FOO=BAR some-program
But that only works because test_must_fail's arguments are
themselves a command which can be run. You can't run:
env FOO=BAR test_must_fail some-program
because env does not know about our shell functions. So
there is no equivalent for test_commit, for example, and one
must resort to:
(
FOO=BAR
export FOO
test_commit
)
which is a bit verbose. Let's add a version of "env" that
works _inside_ the shell, by creating a subshell, exporting
variables from its argument list, and running the command.
Its use is demonstrated on a currently-unportable case in
t4014.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" learned a new "--base" option to record what
(public, well-known) commit the original series was built on in
its output.
* xy/format-patch-base:
format-patch: introduce format.useAutoBase configuration
format-patch: introduce --base=auto option
format-patch: add '--base' option to record base tree info
patch-ids: make commit_patch_id() a public helper function
|
|
This allows to record the base commit automatically, it is equivalent
to set --base=auto in cmdline.
The format.useAutoBase has lower priority than command line option,
so if user set format.useAutoBase and pass the command line option in
the meantime, base_commit will be the one passed to command line
option.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce --base=auto to record the base commit info automatically, the
base_commit will be the merge base of tip commit of the upstream branch
and revision-range specified in cmdline.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Maintainers or third party testers may want to know the exact base tree
the patch series applies to. Teach git format-patch a '--base' option
to record the base tree info and append it at the end of the first
message (either the cover letter or the first patch in the series).
The base tree info consists of the "base commit", which is a well-known
commit that is part of the stable part of the project history everybody
else works off of, and zero or more "prerequisite patches", which are
well-known patches in flight that is not yet part of the "base commit"
that need to be applied on top of "base commit" in topological order
before the patches can be applied.
The "base commit" is shown as "base-commit: " followed by the 40-hex of
the commit object name. A "prerequisite patch" is shown as
"prerequisite-patch-id: " followed by the 40-hex "patch id", which can
be obtained by passing the patch through the "git patch-id --stable"
command.
Imagine that on top of the public commit P, you applied well-known
patches X, Y and Z from somebody else, and then built your three-patch
series A, B, C, the history would be like:
---P---X---Y---Z---A---B---C
With "git format-patch --base=P -3 C" (or variants thereof, e.g. with
"--cover-letter" of using "Z..C" instead of "-3 C" to specify the
range), the base tree information block is shown at the end of the
first message the command outputs (either the first patch, or the
cover letter), like this:
base-commit: P
prerequisite-patch-id: X
prerequisite-patch-id: Y
prerequisite-patch-id: Z
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.
The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.
The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The format of the "From " header line is very specific to allow
utilities to detect Git-style patches. Add a test that the patches
created are in the expected format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Oftentimes, patches created by git format-patch will be stored in
version control or compared with diff. In these cases, two otherwise
identical patches can have different commit hashes, leading to diff
noise. Teach git format-patch a --zero-commit option that instead
produces an all-zero hash to avoid this diff noise.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch --ignore-if-upstream A..B" did not like to be fed
tags as boundary commits.
* jc/do-not-feed-tags-to-clear-commit-marks:
format-patch: do not feed tags to clear_commit_marks()
|
|
"git format-patch --ignore-if-in-upstream A..B", when either A or B
is a tag, failed miserably.
This is because the code passes the tips it used for traversal to
clear_commit_marks(), after running a temporary revision traversal
to enumerate the commits on both branches to find if they have
commits that make equivalent changes. The revision traversal
machinery knows how to enumerate commits reachable starting from a
tag, but clear_commit_marks() wants to take nothing but a commit.
In the longer term, it might be a more correct fix to teach
clear_commit_marks() to do the same "committish to commit"
dereferencing that is done in the revision traversal machinery,
but for now this fix should suffice.
Reported-by: Bruce Korb <bruce.korb@gmail.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jm/format-patch-mail-sig:
format-patch: add "--signature-file=<file>" option
format-patch: make newline after signature conditional
|
|
Adjust shell scripts to use $(cmd) instead of `cmd`.
* ep/shell-command-substitution: (41 commits)
t5000-tar-tree.sh: use the $( ... ) construct for command substitution
t4204-patch-id.sh: use the $( ... ) construct for command substitution
t4119-apply-config.sh: use the $( ... ) construct for command substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
t4014-format-patch.sh: use the $( ... ) construct for command substitution
t4013-diff-various.sh: use the $( ... ) construct for command substitution
t4012-diff-binary.sh: use the $( ... ) construct for command substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
t4006-diff-mode.sh: use the $( ... ) construct for command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1020-subdirectory.sh: use the $( ... ) construct for command substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
...
|
|
Add an option to format-patch for reading a signature from a file.
$ git format-patch -1 --signature-file=$HOME/.signature
The config variable `format.signaturefile` can also be used to make
this the default.
$ git config format.signaturefile $HOME/.signature
$ git format-patch -1
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As of the last commit, we can use "perl" instead of
"$PERL_PATH" when running tests, as the former is now a
function which uses the latter. As the shorter "perl" is
easier on the eyes, let's switch to using it everywhere.
This is not quite a mechanical s/$PERL_PATH/perl/
replacement, though. There are some places where we invoke
perl from a script we generate on the fly, and those scripts
do not have access to our internal shell functions. The
result can be double-checked by running:
ln -s /bin/false bin-wrappers/perl
make test
which continues to pass even after this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit a908047 taught format-patch the "--from" option,
which places the author ident into an in-body from header,
and uses the committer ident in the rfc822 from header. The
documentation claims that it will omit the in-body header
when it is the same as the rfc822 header, but the code never
implemented that behavior.
This patch completes the feature by comparing the two idents
and doing nothing when they are the same (this is the same
as simply omitting the in-body header, as the two are by
definition indistinguishable in this case). This makes it
reasonable to turn on "--from" all the time (if it matches
your particular workflow), rather than only using it when
exporting other people's patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Format-patch generates emails with the "From" address set to the
author of each patch. If you are going to send the emails, however,
you would want to replace the author identity with yours (if they
are not the same), and bump the author identity to an in-body
header.
Normally this is handled by git-send-email, which does the
transformation before sending out the emails. However, some
workflows may not use send-email (e.g., imap-send, or a custom
script which feeds the mbox to a non-git MUA). They could each
implement this feature themselves, but getting it right is
non-trivial (one must canonicalize the identities by reversing any
RFC2047 encoding or RFC822 quoting of the headers, which has caused
many bugs in send-email over the years).
This patch takes a different approach: it teaches format-patch a
"--from" option which handles the ident check and in-body header
while it is writing out the email. It's much simpler to do at this
level (because we haven't done any quoting yet), and any workflow
based on format-patch can easily turn it on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allows format-patch --cover-letter to be configurable; the most
notable is the "auto" mode to create cover-letter only for multi
patch series.
* fc/send-email-annotate:
rebase-am: explicitly disable cover-letter
format-patch: trivial cleanups
format-patch: add format.coverLetter configuration variable
log: update to OPT_BOOL
format-patch: refactor branch name calculation
format-patch: improve head calculation for cover-letter
send-email: make annotate configurable
|
|
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
|
|
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also, add a new option: 'auto', so if there's more than one patch, the
cover letter is generated, otherwise it's not.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we do it after the revision traversal we can be sure that this is
indeed a commit that will be processed (i.e. not a merge) and it's the
top most one (thus removing the NEEDSWORK comment, at least we show the
same as 'git diff --stat' output that appears in the cover-letter).
While we are at it, since we know there's nothing to generate, exit
sooner in all cases, like --cover-letter currently does.
Also, if there's nothing to generate and cover-letter is specified, a
different code-path might be triggered that is not currently covered in
the test-case, so add a test for it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in the
middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
|
|
Consolidate codepaths that inspect log-message-to-be and decide to
add a new Signed-off-by line in various commands.
* bc/append-signed-off-by:
git-commit: populate the edit buffer with 2 blank lines before s-o-b
Unify appending signoff in format-patch, commit and sequencer
format-patch: update append_signoff prototype
t4014: more tests about appending s-o-b lines
sequencer.c: teach append_signoff to avoid adding a duplicate newline
sequencer.c: teach append_signoff how to detect duplicate s-o-b
sequencer.c: always separate "(cherry picked from" from commit body
sequencer.c: require a conforming footer to be preceded by a blank line
sequencer.c: recognize "(cherry picked from ..." as part of s-o-b footer
t/t3511: add some tests of 'cherry-pick -s' functionality
t/test-lib-functions.sh: allow to specify the tag name to test_commit
commit, cherry-pick -s: remove broken support for multiline rfc2822 fields
sequencer.c: rework search for start of footer to improve clarity
|
|
When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in
the middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
|
|
Even though an earlier attempt (bafc478..41dd00bad) cleaned
up RFC 2047 encoding, pretty.c::add_rfc2047() still decides
where to split the output line by going through the input
one byte at a time, and potentially splits a character in
the middle. A subject line may end up showing like this:
".... fö?? bar". (instead of ".... föö bar".)
if split incorrectly.
RFC 2047, section 5 (3) explicitly forbids such beaviour
Each 'encoded-word' MUST represent an integral number of
characters. A multi-octet character may not be split across
adjacent 'encoded- word's.
that means that e.g. for
Subject: .... föö bar
encoding
Subject: =?UTF-8?q?....=20f=C3=B6=C3=B6?=
=?UTF-8?q?=20bar?=
is correct, and
Subject: =?UTF-8?q?....=20f=C3=B6=C3?= <-- NOTE ö is broken here
=?UTF-8?q?=B6=20bar?=
is not, because "ö" character UTF-8 encoding C3 B6 is split here across
adjacent encoded words.
To fix the problem, make the loop grab one _character_ at a time and
determine its output length to see where to break the output line. Note
that this version only knows about UTF-8, but the logic to grab one
character is abstracted out in mbs_chrlen() function to make it possible
to extend it to other encodings with the help of iconv in the future.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two implementations of append_signoff in log-tree.c and
sequencer.c, which do more or less the same thing. Unify on top of the
sequencer.c implementation.
Add a test in t4014 to demonstrate support for non-s-o-b elements in the
commit footer provided by sequence.c:append_sob. Mark tests fixed as
appropriate.
[Commit message mostly stolen from Nguyễn Thái Ngọc Duy's original
unification patch]
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[bc: Squash the tests from Duy's original unify-appending-sob series.
Fix test 90 "signoff: some random signoff-alike" and mark as failing.
Correct behavior should insert a blank line after message body and
signed-off-by.
Add two additional tests:
1. failure to detect non-conforming elements in the footer when last
line matches committer's s-o-b.
2. ensure various s-o-b -like elements in the footer are handled as
conforming. e.g. "Change-id: IXXXX or Bug: 1234"
]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "format-patch" to prefix v4- to its output files for the
fourth iteration of a patch series, to make it easier for the
submitter to keep separate copies for iterations.
* jc/format-patch-reroll:
format-patch: give --reroll-count a short synonym -v
format-patch: document and test --reroll-count
format-patch: add --reroll-count=$N option
get_patch_filename(): split into two functions
get_patch_filename(): drop "just-numbers" hack
get_patch_filename(): simplify function signature
builtin/log.c: stop using global patch_suffix
builtin/log.c: drop redundant "numbered_files" parameter from make_cover_letter()
builtin/log.c: drop unused "numbered" parameter from make_cover_letter()
|
|
Teach various forms of "format-patch" command line to identify what
branch the patches are taken from, so that the branch description
is picked up in more cases.
* nd/maint-branch-desc-doc:
format-patch: pick up branch description when no ref is specified
format-patch: pick up correct branch name from symbolic ref
t4014: a few more tests on cover letter using branch description
branch: delete branch description if it's empty
config.txt: a few lines about branch.<name>.description
|
|
Accept "-v" as a synonym to "--reroll-count", so that users can say
"git format-patch -v4 master", instead of having to fully spell it
out as "git format-patch --reroll-count=4 master".
As I do not think of a reason why users would want to tell the
command to be "verbose", I think this should be OK.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We only try to get branch name in "format-patch origin" case or
similar and not "format-patch -22" where HEAD is automatically
added. Without correct branch name, branch description cannot be
added. Make sure we always get branch name.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
find_branch_name() assumes to take refs/heads/<branch>. But we also
have symbolic refs, such as HEAD, that can point to a valid branch in
refs/heads and do not follow refs/heads/<branch> syntax. Remove the
assumption and apply normal ref resolution. After all it would be
confusing if rev machinery resolves a ref in one way and
find_branch_name() another.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t4014, t9502 and t0200 tests had various portability issues that
broke on OpenBSD.
* jc/maint-test-portability:
t4014: fix arguments to grep
t9502: do not assume GNU tar
t0200: "locale" may not exist
|
|
These "expect-failure" tests were not looking for the right string
in the patch file. For example:
grep "^ *"S. E. Cipient" <scipient@example.com>\$" patch5
was looking for "^ *S." in these three files:
"E."
"Cipient <scipient@example.com>$"
"patch5"
With some implementations of grep, the lack of file "E." was
reported as an error, leading to the failure of the test.
With other implementations of grep, the pattern "^ *S." matched what
was in patch5, without diagnosing the missing files as an error, and
made these tests unexpectedly pass.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Emit the notes attached to the commit in "format-patch --notes"
output after three-dashes.
* jc/prettier-pretty-note:
format-patch: add a blank line between notes and diffstat
Doc User-Manual: Patch cover letter, three dashes, and --notes
Doc format-patch: clarify --notes use case
Doc notes: Include the format-patch --notes option
Doc SubmittingPatches: Mention --notes option after "cover letter"
Documentation: decribe format-patch --notes
format-patch --notes: show notes after three-dashes
format-patch: append --signature after notes
pretty_print_commit(): do not append notes message
pretty: prepare notes message at a centralized place
format_note(): simplify API
pretty: remove reencode_commit_message()
|
Jonathan Tan
Junio C Hamano
Josh Triplett
Eric Wong
Jeff King
Xiaolong Ye
Matthieu Moy
Alexander Kuleshov
brian m. carlson
Jeremiah Mahler
Elia Pinto
David Tran
Stefano Lattarini
Felipe Contreras
Kirill Smelkov
Brandon Casey
Nguyễn Thái Ngọc Duy