summaryrefslogtreecommitdiff
path: root/t/t4013-diff-various.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-02-27diff: add --compact-summaryLibravatar Nguyễn Thái Ngọc Duy1-0/+5
Certain information is currently shown with --summary, but when used in combination with --stat it's a bit hard to read since info of the same file is in two places (--stat and --summary). On top of that, commits that add or remove files double the number of display lines, which could be a lot if you add or remove a lot of files. --compact-summary embeds most of --summary back in --stat in the little space between the file name part and the graph line, e.g. with commit 0433d533f1: Documentation/merge-config.txt | 4 + builtin/merge.c | 2 + ...-pull-verify-signatures.sh (new +x) | 81 ++++++++++++++ t/t7612-merge-verify-signatures.sh | 45 ++++++++ 4 files changed, 132 insertions(+) It helps both condensing information and saving some text space. What's new in diffstat is: - A new 0644 file is shown as (new) - A new 0755 file is shown as (new +x) - A new symlink is shown as (new +l) - A deleted file is shown as (gone) - A mode change adding executable bit is shown as (mode +x) - A mode change removing it is shown as (mode -x) Note that --compact-summary does not contain all the information --summary provides. Rewrite percentage is not shown but it could be added later, like R50% or C20%. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-06t4013: test new output from diff --abbrev --rawLibravatar Ann T Ropea1-1/+15
Use newly-introduced finely-grained control to teach the diff-family to honor the new environment GIT_PRINT_SHA1_ELLIPSIS and remove the ellipses when it is not set. Mentored-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Ann T Ropea <bedhanger@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-06t4013: prepare for upcoming "diff --raw --abbrev" output format changeLibravatar Ann T Ropea1-6/+23
Most of the t4013 tests go through a list of sample command lines, and each of them is executed and its output compared with an expected one stored in t4013/ directory. Allow these lines to begin with a colon followed by magic word(s) so that test conditions can easily be tweaked. The expected use that will happen in later steps of this is to run tests expecting the traditional output and run the same test without the GIT_PRINT_SHA1_ELLIPSIS=yes environment exported for (perhaps some of) them, which will have to expect different output. Since all of the existing tests are meant to run with the environment, use the magic word "noellipses" to cause the variable not to be set and exported. As this step does not add any new test with the magic word, all tests still run with the environment variable, expecting the traditional output, but it will change soon. Based-on-patch-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Ann T Ropea <bedhanger@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-04print_sha1_ellipsis: introduce helperLibravatar Ann T Ropea1-1/+1
Introduce a helper print_sha1_ellipsis() that pays attention to the GIT_PRINT_SHA1_ELLIPSIS environment variable, and prepare the tests to unconditionally set it for the test pieces that will be broken once the code stops showing the extra dots by default. The removal of these dots is merely a plan at this step and has not happened yet but soon will. Document GIT_PRINT_SHA1_ELLIPSIS. Signed-off-by: Ann T Ropea <bedhanger@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-28diff: correct newline in summary for renamed filesLibravatar Stefan Beller1-0/+12
In 146fdb0dfe (diff.c: emit_diff_symbol learns about DIFF_SYMBOL_SUMMARY, 2017-06-29), the conversion from direct printing to the symbol emission dropped the new line character for renamed, copied and rewritten files. Add the emission of a newline, add a test for this case. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-08diff: handle --no-abbrev in no-index caseLibravatar Jack Bates1-0/+7
There are two different places where the --no-abbrev option is parsed, and two different places where SHA-1s are abbreviated. We normally parse --no-abbrev with setup_revisions(), but in the no-index case, "git diff" calls diff_opt_parse() directly, and diff_opt_parse() didn't handle --no-abbrev until now. (It did handle --abbrev, however.) We normally abbreviate SHA-1s with find_unique_abbrev(), but commit 4f03666 ("diff: handle sha1 abbreviations outside of repository, 2016-10-20) recently introduced a special case when you run "git diff" outside of a repository. setup_revisions() does also call diff_opt_parse(), but not for --abbrev or --no-abbrev, which it handles itself. setup_revisions() sets rev_info->abbrev, and later copies that to diff_options->abbrev. It handles --no-abbrev by setting abbrev to zero. (This change doesn't touch that.) Setting abbrev to zero was broken in the outside-of-a-repository special case, which until now resulted in a truly zero-length SHA-1, rather than taking zero to mean do not abbreviate. The only way to trigger this bug, however, was by running "git diff --raw" without either the --abbrev or --no-abbrev options, because 1) without --raw it doesn't respect abbrev (which is bizarre, but has been that way forever), 2) we silently clamp --abbrev=0 to MINIMUM_ABBREV, and 3) --no-abbrev wasn't handled until now. The outside-of-a-repository case is one of three no-index cases. The other two are when one of the files you're comparing is outside of the repository you're in, and the --no-index option. Signed-off-by: Jack Bates <jack@nottheoilrig.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-31graph: add support for --line-prefix on all graph-aware outputLibravatar Jacob Keller1-0/+6
Add an extension to git-diff and git-log (and any other graph-aware displayable output) such that "--line-prefix=<string>" will print the additional line-prefix on every line of output. To make this work, we have to fix a few bugs in the graph API that force graph_show_commit_msg to be used only when you have a valid graph. Additionally, we extend the default_diff_output_prefix handler to work even when no graph is enabled. This is somewhat of a hack on top of the graph API, but I think it should be acceptable here. This will be used by a future extension of submodule display which displays the submodule diff as the actual diff between the pre and post commit in the submodule project. Add some tests for both git-log and git-diff to ensure that the prefix is honored correctly. Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-25diff: activate diff.renames by defaultLibravatar Matthieu Moy1-0/+2
Rename detection is a very convenient feature, and new users shouldn't have to dig in the documentation to benefit from it. Potential objections to activating rename detection are that it sometimes fail, and it is sometimes slow. But rename detection is already activated by default in several cases like "git status" and "git merge", so activating diff.renames does not fundamentally change the situation. When the rename detection fails, it now fails consistently between "git diff" and "git status". This setting does not affect plumbing commands, hence well-written scripts will not be affected. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-28Merge branch 'maint'Libravatar Junio C Hamano1-0/+10
* maint: t4013: test diff-tree's --stdin commit formatting diff-tree: avoid lookup_unknown_object object_as_type: set commit index alloc: factor out commit index add object_as_type helper for casting objects parse_object_buffer: do not set object type move setting of object->type to alloc_* functions alloc: write out allocator definitions alloc.c: remove the alloc_raw_commit_node() function
2014-07-28t4013: test diff-tree's --stdin commit formattingLibravatar Jeff King1-0/+10
Once upon a time, git-log was just "rev-list | diff-tree", and we did not bother to test it separately. These days git-log is implemented internally, but we want to make sure that the rev-list to diff-tree pipeline continues to function. Let's add a basic sanity test. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-30t4013-diff-various.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-3/+3
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do sed -i 's@`\(.*\)`@$(\1)@g' ${_f} done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-13diffstat summary line varies by locale: miscellanyLibravatar Jonathan Nieder1-1/+6
These changes are in the same spirit as the six patches that precede them, but they haven't been split into individually justifiable patches yet. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-11Teach --dirstat not to completely ignore rearranged lines within a fileLibravatar Johan Herland1-2/+0
Currently, the --dirstat analysis ignores when lines within a file are rearranged, because the "damage" calculated by show_dirstat() is 0. However, if the object name has changed, we already know that there is some damage, and it is unintuitive to claim there is _no_ damage. Teach show_dirstat() to assign a minimum amount of damage (== 1) to entries for which the analysis otherwise yields zero damage, to still represent that these files are changed, instead of saying that there is no change. Also, skip --dirstat analysis when the object names are the same (e.g. for a pure file rename). Signed-off-by: Johan Herland <johan@herland.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-11--dirstat-by-file: Make it faster and more correctLibravatar Johan Herland1-0/+2
Currently, when using --dirstat-by-file, it first does the full --dirstat analysis (using diffcore_count_changes()), and then resets 'damage' to 1, if any damage was found by diffcore_count_changes(). But --dirstat-by-file is not interested in the file damage per se. It only cares if the file changed at all. In that sense it only cares if the blob object for a file has changed. We therefore only need to compare the object names of each file pair in the diff queue and we can skip the entire --dirstat analysis and simply set 'damage' to 1 for each entry where the object name has changed. This makes --dirstat-by-file faster, and also bypasses --dirstat's practice of ignoring rearranged lines within a file. The patch also contains an added testcase verifying that --dirstat-by-file now detects changes that only rearrange lines within a file. Signed-off-by: Johan Herland <johan@herland.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-11--dirstat: Describe non-obvious differences relative to --stat or regular diffLibravatar Johan Herland1-6/+21
Also add a testcase documenting the current behavior. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09log: fix --max-count when used together with -S or -GLibravatar Matthieu Moy1-0/+3
The --max-count limit is implemented by counting revisions in get_revision(), but the -S and -G take effect later when running diff. Hence "--max-count=10 -Sfoo" meant "examine the 10 first revisions, and out of them, show only those changing the occurences of foo", not "show 10 revisions changing the occurences of foo". In case the commit isn't actually shown, cancel the decrement of max_count. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-07diff: support --cached on unborn branchesLibravatar Nguyễn Thái Ngọc Duy1-0/+11
"git diff --cached" (without revision) used to mean "git diff --cached HEAD" (i.e. the user was too lazy to type HEAD). This "correctly" failed when there was no commit yet. But was that correctness useful? This patch changes the definition of what particular command means. It is a request to show what _would_ be committed without further "git add". The internal implementation is the same "git diff --cached HEAD" when HEAD exists, but when there is no commit yet, it compares the index with an empty tree object to achieve the desired result. Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31diff/log -G<pattern>: testsLibravatar Junio C Hamano1-0/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06diff: parse separate options like -S fooLibravatar Matthieu Moy1-0/+5
Change the option parsing logic in revision.c to accept separate forms like `-S foo' in addition to `-Sfoo'. The rest of git already accepted this form, but revision.c still used its own option parsing. Short options affected are -S<string>, -l<num> and -O<orderfile>, for which an empty string wouldn't make sense, hence -<option> <arg> isn't ambiguous. This patch does not handle --stat-name-width and --stat-width, which are special-cases where diff_long_opt do not apply. They are handled in a separate patch to ease review. Original patch by Matthieu Moy, plus refactoring by Jonathan Nieder. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-09show --first-parent/-m: do not default to --ccLibravatar Junio C Hamano1-0/+2
Given that "git show" always shows some diff and does not walk the history by default, it is natural to expect "git show --first-parent" to show the difference between the given commit and its first parent. It also would be natural, given that "--cc" is the default, "git show -m" to show pairwise difference from each of the parents. We however always defaulted to --cc and there was no way to turn it off. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-09show -c: show patch textLibravatar Junio C Hamano1-0/+1
Traditionally, "show" defaulted to "show --cc" (dense combined patch), but asking for combined patch with "show -c" didn't turn the patch output format on; the placement of this logic in setup_revisions() dates back to cd2bdc5 (Common option parsing for "git log --diff" and friends, 2006-04-14). This unfortunately cannot be done as a trivial change of "if dense combined is asked, default to patch format" done in setup_revisions() to "if any combined is asked, default to patch format", as "diff-tree -c" needs to default to raw, while "diff-tree --cc" needs to default to patch, and they share the codepath. These command specific defaults are now handled in the new "tweak" callback that can be customized by individual command implementations. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-09t4013: add tests for log -p -m --first-parentLibravatar Junio C Hamano1-0/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-18git-log: allow --decorate[=short|full]Libravatar Lars Hjemli1-0/+1
Commit de435ac0 changed the behavior of --decorate from printing the full ref (e.g., "refs/heads/master") to a shorter, more human-readable version (e.g., just "master"). While this is nice for human readers, external tools using the output from "git log" may prefer the full version. This patch introduces an extension to --decorate to allow the caller to specify either the short or the full versions. Signed-off-by: Lars Hjemli <hjemli@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-22format-patch: --numbered-files and --stdout aren't mutually exclusiveLibravatar Stephen Boyd1-1/+1
For example: git format-patch --numbered-files --stdout --attach HEAD~~ will create two messages with files 1 and 2 attached respectively. There is no effect when using --numbered-files and --stdout together without an --attach or --inline, the --numbered-files option will be ignored. Add a test to show this. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-22format-patch: --attach/inline uses filename instead of SHA1Libravatar Stephen Boyd1-0/+1
Currently when format-patch is used with --attach or --inline the patch attachment has the SHA1 of the commit for its filename. This replaces the SHA1 with the filename used by format-patch when outputting to files. Fix tests relying on the SHA1 output and add a test showing how the --suffix option affects the attachment filename output. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-19test-lib: Simplify test counting.Libravatar Johannes Sixt1-2/+1
Since the test case counter was incremented very late, there were a few users of the counter had to do their own incrementing. Now we increment it early and simplify these users. Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-11Merge branch 'tr/gcov'Libravatar Junio C Hamano1-0/+5
* tr/gcov: Test git-patch-id Test rev-list --parents/--children Test log --decorate Test fsck a bit harder Test log --graph Test diff --dirstat functionality Test that diff can read from stdin Support coverage testing with GCC/gcov
2009-02-20Test rev-list --parents/--childrenLibravatar Thomas Rast1-0/+3
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-20Test log --decorateLibravatar Thomas Rast1-0/+1
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-20Test diff --dirstat functionalityLibravatar Thomas Rast1-0/+1
This is only a very rudimentary test, but it was untested before. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-18Skip timestamp differences for diff --no-indexLibravatar Michael Spang1-0/+5
We display empty diffs for files whose timestamps have changed. Usually, refreshing the index makes those empty diffs go away. However, when not using the index they are not very useful and there is no option to suppress them. This forces on the skip_stat_unmatch option for diff --no-index, suppressing any empty diffs. This option is also used for diffs against the index when "diff.autorefreshindex" is set, but that option does not apply to diff --no-index. Signed-off-by: Michael Spang <mspang@uwaterloo.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-06diff: accept -- when using --no-indexLibravatar Thomas Rast1-0/+1
Accept -- as an "end of options" marker even when using --no-index. Previously, the -- triggered a "normal" index/tree diff and subsequently failed because of the unrecognized (in that mode) --no-index. Note that the second loop can treat '--' as a normal option, because the preceding checks ensure it is the third-to-last argument. While at it, fix the parsing of "-q" option in --no-index mode as well. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-18format-patch: autonumber by defaultLibravatar Brian Gernhardt1-0/+3
format-patch is most commonly used for multiple patches at once when sending a patchset, in which case we want to number the patches; on the other hand, single patches are not usually expected to be numbered. In other words, the typical behavior expected from format-patch is the one obtained by enabling autonumber, so we set it to be the default. Users that want to disable numbering for a particular patchset can do so with the existing -N command-line switch. Users that want to change the default behavior can use the format.numbering config key. Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Test-updates-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-12"git diff <tree>{3,}": do not reverse order of argumentsLibravatar Matt McCutchen1-0/+1
According to the message of commit 0fe7c1de16f71312e6adac4b85bddf0d62a47168, "git diff" with three or more trees expects the merged tree first followed by the parents, in order. However, this command reversed the order of its arguments, resulting in confusing diffs. A comment /* Again, the revs are all reverse */ suggested there was a reason for this, but I can't figure out the reason, so I removed the reversal of the arguments. Test case included. Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-08-17tests: use $TEST_DIRECTORY to refer to the t/ directoryLibravatar Junio C Hamano1-1/+1
Many test scripts assumed that they will start in a 'trash' subdirectory that is a single level down from the t/ directory, and referred to their test vector files by asking for files like "../t9999/expect". This will break if we move the 'trash' subdirectory elsewhere. To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can refer to t/ directory reliably. This finally makes all the tests use it to refer to the outside environment. With this patch, and a one-liner not included here (because it would contradict with what Dscho really wants to do): | diff --git a/t/test-lib.sh b/t/test-lib.sh | index 70ea7e0..60e69e4 100644 | --- a/t/test-lib.sh | +++ b/t/test-lib.sh | @@ -485,7 +485,7 @@ fi | . ../GIT-BUILD-OPTIONS | | # Test repository | -test="trash directory" | +test="trash directory/another level/yet another" | rm -fr "$test" || { | trap - exit | echo >&5 "FATAL: Cannot prepare test area" all the tests still pass, but we would want extra sets of eyeballs on this type of change to really make sure. [jc: with help from Stephan Beyer on http-push tests I do not run myself; credits for locating silly quoting errors go to Olivier Marin.] Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-24"git diff": do not ignore index without --no-indexLibravatar Junio C Hamano1-0/+1
Even if "foo" and/or "bar" does not exist in index, "git diff foo bar" should not change behaviour drastically from "git diff foo bar baz" or "git diff foo". A feature that "sometimes works and is handy" is an unreliable cute hack. "git diff foo bar" outside a git repository continues to work as a more colourful alternative to "diff -u" as before. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-24tests: do not use implicit "git diff --no-index"Libravatar Junio C Hamano1-1/+1
As a general principle, we should not use "git diff" to validate the results of what git command that is being tested has done. We would not know if we are testing the command in question, or locating a bug in the cute hack of "git diff --no-index". Rather use test_cmp for that purpose. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-19Add a --cover-letter option to format-patchLibravatar Daniel Barkalow1-0/+1
If --cover-letter is provided, generate a cover letter message before the patches, numbered 0. Original patch thanks to Johannes Schindelin Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03Merge branch 'maint'Libravatar Junio C Hamano1-0/+2
* maint: Document -<n> for git-format-patch glossary: add 'reflog' diff --no-index: fix --name-status with added files Don't smash stack when $GIT_ALTERNATE_OBJECT_DIRECTORIES is too long
2007-07-03diff --no-index: fix --name-status with added filesLibravatar Johannes Schindelin1-0/+2
Without this patch, an added file would be reported as /dev/null. Noticed by David Kastrup. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02format-patch: Add format.subjectprefix config optionLibravatar Adam Roben1-0/+2
This change lets you use the format.subjectprefix config option to override the default subject prefix. Signed-off-by: Adam Roben <aroben@apple.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-11Add testcase for format-patch --subject-prefix (take 3)Libravatar Robin H. Johnson1-0/+1
Add testcase for format-patch --subject-prefix support. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-10Merge branch 'js/attach'Libravatar Junio C Hamano1-1/+4
* js/attach: format-patch --attach: not folding some long headers. format-patch: add --inline option and make --attach a true attachment
2007-03-04format-patch --attach: not folding some long headers.Libravatar Junio C Hamano1-1/+1
Panagiotis Issaris reports that some MUAs seem not to like folded "content-type" and "content-disposition" headers, so this makes format-patch --attach output to avoid them. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04format-patch: add --inline option and make --attach a true attachmentLibravatar Johannes Schindelin1-0/+3
The existing --attach option did not create a true "attachment" but multipart/mixed with Content-Disposition: inline. It should have been with Content-Disposition: attachment. Introduce --inline to add multipart/mixed that is inlined, and make --attach to create an attachement. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04Get rid of the dependency to GNU diff in the testsLibravatar Johannes Schindelin1-1/+1
Now that "git diff" handles stdin and relative paths outside the working tree correctly, we can convert all instances of "diff -u" to "git diff". This commit is really the result of $ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net> (cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
2007-01-28[PATCH] Rename git-repo-config to git-config.Libravatar Tom Prince1-1/+1
Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-24config option log.showroot to show the diff of root commitsLibravatar Peter Baumann1-0/+1
This allows one to see a root commit as a diff in commands like git-log, git-show and git-whatchanged. Signed-off-by: Peter Baumann <Peter.B.Baumannn@stud.informatik.uni-erlangen.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-12t/t4013: fix futzing with the version string.Libravatar Junio C Hamano1-2/+4
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-13t4013 diff format tests updateLibravatar Junio C Hamano1-1/+4
This changes one test commit in the sequence to have more than one lines of commit log. A few output formats (--pretty=email aka format-patch and --pretty=oneline) need to behave differently on single and multi-line log, and this change will help catching breakages. Signed-off-by: Junio C Hamano <junkio@cox.net>