| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make "git stash something --help" error out, so that users can
safely say "git stash drop --help".
* jk/stash-options:
stash: recognize "--help" for subcommands
stash: complain about unknown flags
|
|
The option parser for git-stash stuffs unknown flags into
the $FLAGS variable, where they can be accessed by the
individual commands. However, most commands do not even look
at these extra flags, leading to unexpected results like
this:
$ git stash drop --help
Dropped refs/stash@{0} (e6cf6d80faf92bb7828f7b60c47fc61c03bd30a1)
We should notice the extra flags and bail. Rather than
annotate each command to reject a non-empty $FLAGS variable,
we can notice that "stash show" is the only command that
actually _wants_ arbitrary flags. So we switch the default
mode to reject unknown flags, and let stash_show() opt into
the feature.
Reported-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you have staged contents in your index and run "stash
apply", we may hit a conflict and put new entries into the
index. Recovering to your original state is difficult at
that point, because tools like "git reset --keep" will blow
away anything staged. We can make this safer by refusing to
apply when there are staged changes.
It's possible we could provide better tooling here, as "git
stash apply" should be writing only conflicts to the index
(so we know that any stage-0 entries are potentially
precious). But it is the odd duck; most "mergy" commands
will update the index for cleanly merged entries, and it is
not worth updating our tooling to support this use case
which is unlikely to be of interest (besides which, we would
still need to block a dirty index for "stash apply --index",
since that case _would_ be ambiguous).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the tests in t3903 wants to make sure that applying a
stash that touches only "file" can still happen even if there
are working tree changes to "other-file". To do so, it adds
"other-file" to the index (since otherwise it is an
untracked file, voiding the purpose of the test).
But as we are about to refactor the dirty-index handling,
and as this test does not actually care about having a dirty
index (only a dirty working tree), let's bump the tracking
of "other-file" into the setup phase, so we can have _just_
a dirty working tree here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When testing the diff output of "git stash list", we look
for the stash's subject of "WIP on master: $sha1", even
though it's not relevant to the diff output. This makes the
test brittle to refactoring, as any changes to earlier tests
may impact the commit sha1.
Since we don't care about the commit subject here, we can
simply ask stash not to print it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you list stashes, you can provide arbitrary git-log
options to change the display. However, adding just "-p"
does nothing, because each stash is actually a merge commit.
This implementation detail is easy to forget, leading to
confused users who think "-p" is not working. We can make
this easier by defaulting to "--first-parent -m", which will
show the diff against the working tree. This omits the
index portion of the stash entirely, but it's simple and it
matches what "git stash show" provides.
People who are more clueful about stash's true form can use
"--cc" to override the "-m", and the "--first-parent" will
then do nothing. For diffs, it only affects non-combined
diffs, so "--cc" overrides it. And for the traversal, we are
walking the linear reflog anyway, so we do not even care
about the parents.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When trying to pop/apply a stash specified with an argument
containing IFS whitespace, git-stash will throw an error:
$ git stash pop 'stash@{two hours ago}'
Too many revisions specified: stash@{two hours ago}
This happens because word splitting is used to count non-option
arguments. Make use of rev-parse's --sq option to quote the arguments
for us to ensure a correct count. Add quotes where necessary.
Also add a test that verifies correct behaviour.
Helped-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit a73653130edd6a8977106d45a8092c09040f9132, as it
has been reported that "ls-files --killed" is too time-consuming in
a deep directory with too many untracked crufts (e.g. $HOME/.git
tracking only a few files).
We'd need to revisit it later but "ls-files --killed" needs to be
optimized before it happens.
|
|
"stash save" is about saving the local change to the working tree,
but also about restoring the state of the last commit to the working
tree. When a local change is to turn a non-directory to a directory,
in order to restore the non-directory, everything in the directory
needs to be removed.
Which is fine when running "git stash save --include-untracked",
but without that option, untracked, newly created files in the
directory will have to be discarded, if the state you are restoring
to has a non-directory at the same path as the directory.
Introduce a safety valve to fail the operation in such case, using
the "ls-files --killed" which was designed for this exact purpose.
The "stash save" is stopped when untracked files need to be
discarded because their leading path ceased to be a directory, and
the user is required to pass --force to really have the data
removed.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finishing touches for the "git rebase --autostash" feature
introduced earlier.
* rr/rebase-stash-store:
rebase: use 'git stash store' to simplify logic
stash: introduce 'git stash store'
stash: simplify option parser for create
stash doc: document short form -p in synopsis
stash doc: add a warning about using create
|
|
* fc/show-non-empty-errors-in-test:
test: test_must_be_empty helper
|
|
save_stash() contains the logic for doing two potentially independent
operations; the first is preparing the stash merge commit, and the
second is updating the stash ref/ reflog accordingly. While the first
operation is abstracted out into a create_stash() for callers to access
via 'git stash create', the second one is not. Fix this by factoring
out the logic for storing the stash into a store_stash() that callers
can access via 'git stash store'.
Like create, store is not intended for end user interactive use, but for
callers in other scripts. We can simplify the logic in the
rebase.autostash feature using this new subcommand.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are quite a lot places where an output file is expected to be
empty, and we fail the test when it is not. The output from running
the test script with -i -v can be helped if we showed the unexpected
contents at that point.
We could of course do
>expected.empty && test_cmp expected.empty actual
but this is commmon enough to be done with a dedicated helper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many instances where the treatment of symbolic links in the
object model and the algorithms are tested, but where it is not
necessary to actually have a symbolic link in the worktree. Make
adjustments to the tests and remove the SYMLINKS prerequisite when
appropriate in trivial cases, where "trivial" means:
- merely a replacement of 'ln -s a b && git add b' by test_ln_s_add
is needed;
- a test for symbolic link on the file system can be split off (and
remains protected by SYMLINKS);
- existing code is equivalent to test_ln_s_add.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use i18n-specific test functions in test scripts for git-stash.
This issue was was introduced in v1.7.4.1-119-g355ec:
355ec i18n: git-status basic messages
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git's diff --stat output is intended for human consumption and
since v1.7.9.2~13 (2012-02-01) varies by locale. Add a test checking
that git stash show defaults to --stat and tweak the rest of the
"stash show" tests that showed a diffstat to use numstat.
This way, there are fewer tests to tweak if the diffstat format
changes again. This also improves test coverage when running tests
with git configured not to write its output in the C locale (e.g.,
via GETTEXT_POISON=Yes).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since v1.7.9.2~13 (2012-02-01), git's diffstat-style summary line
produced by "git apply --stat", "git diff --stat", and "git commit"
varies by locale, producing test failures when GETTEXT_POISON is set.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When performing a plain "git stash" (without --patch), git-diff would fail
with "fatal: ambiguous argument 'HEAD': both revision and filename". The
output was piped into git-update-index, masking the failed exit status.
The output is now sent to a temporary file (which is cleaned up by
existing code), and the exit status is checked. The "HEAD" arg to the
git-diff invocation has been disambiguated too, of course.
In patch mode, "git stash -p" would fail harmlessly, leaving the working
dir untouched. Interactive adding is fine, but the resulting tree was
diffed with an ambiguous 'HEAD' argument.
Use >foo (no space) when redirecting output.
In t3904, checks and operations on each file are in the order they'll
appear when interactively staging.
In t3905, fix a bug in "stash save --include-untracked -q is quiet": The
redirected stdout file was considered untracked, and so was removed from
the working directory. Use test path helper functions where appropriate.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/maint-t3903-misquoted-command:
t3903: fix misquoted rev-parse invocation
|
|
!"git ..." hopefully always succeeds because "git ..." is not the name
of any executable. However, that's not what was intended. Unquote
it, and while we're at it, also replace ! with test_must_fail since it
is a call to git.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
refs.c had a error message "Trying to write ref with nonexistant object".
And no tests relied on the wrong spelling.
Also typo was present in some test scripts internals, these tests still pass.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dm/stash-k-i-p:
stash: ensure --no-keep-index and --patch can be used in any order
stash: add two more tests for --no-keep-index
|
|
* jk/maint-stash-oob:
stash: fix false positive in the invalid ref test.
stash: fix accidental apply of non-existent stashes
Conflicts:
t/t3903-stash.sh
|
|
One of these passes just fine; the other one exposes a problem where
command line flag order matters for --no-keep-index and --patch
interaction.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before we apply a stash, we make sure there are no changes
in the worktree that are not in the index. This check dates
back to the original git-stash.sh, and is presumably
intended to prevent changes in the working tree from being
accidentally lost during the merge.
However, this check has two problems:
1. It is overly restrictive. If my stash changes only file
"foo", but "bar" is dirty in the working tree, it will
prevent us from applying the stash.
2. It is redundant. We don't touch the working tree at all
until we actually call merge-recursive. But it has its
own (much more accurate) checks to avoid losing working
tree data, and will abort the merge with a nicer
message telling us which paths were problems.
So we can simply drop the check entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Jeff King reported a problem with git stash apply incorrectly
applying an invalid stash reference.
There is an existing test that should have caught this, but
the test itself was broken, resulting in a false positive.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once upon a time, "git rev-parse ref@{9999999}" did not
generate an error. Therefore when we got an invalid stash
reference in "stash apply", we could end up not noticing
until quite late. Commit b0f0ecd (detached-stash: work
around git rev-parse failure to detect bad log refs,
2010-08-21) handled this by checking for the "Log for stash
has only %d entries" warning on stderr when we validated the
ref.
A few days later, e6eedc3 (rev-parse: exit with non-zero
status if ref@{n} is not valid., 2010-08-24) fixed the
original issue. That made the extra stderr test superfluous,
but also introduced a new bug. Now the early call to:
git rev-parse --symbolic "$@"
fails, but we don't notice the exit code. Worse, its empty
output means we think the user didn't provide us a ref, and
we try to apply stash@{0}.
This patch checks the rev-parse exit code and fails early in
the revision parsing process. We can also get rid of the
stderr test; as a bonus, this means that "stash apply" can
now run under GIT_TRACE=1 properly.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[jc: moved "cd subdir" inside subshell and fixed comparison with expected]
Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash branch <branch> <stash>" started discarding the stash
when the branch creation fails. It should have kept the stash
intact when aborting.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
exists
This bug was disovered by someone on IRC when he tried to
$ git stash branch <branch> <stash>
while <branch> already existed. In that case the stash is dropped even
though it isn't applied on any branch, so the stash is effectively lost.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently git-stash uses `git rev-parse --no-revs -- "$@"` to set its
FLAGS variable. This is the same as `FLAGS="-- $@"`. It should use
`git rev-parse --no-revs --flags "$@"`, but that eats any "-q" or
"--quiet" argument. So move the check for quiet before rev-parse.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently, the 'stash show' functionality was broken for the case when a
stash-like argument was supplied. Since, commit 9bf09e, 'stash show' when
supplied a stash-like argument prints nothing and still exists with a zero
status. Unfortunately, the flaw slipped through the test suite cracks
since the output of 'stash show' was not verified to be correct.
Improve and expand on the existing tests so that this flaws is detected.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Format the subshells introduced by the previous patch (Several tests:
cd inside subshell instead of around, 2010-09-06) like so:
(
cd subdir &&
...
) &&
This is generally easier to read and has the nice side-effect that
this patch will show what commands are used in the subshell, making
it easier to check for lost environment variables and similar
behavior changes.
Cc: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/maint-fix-test:
Several tests: cd inside subshell instead of around
Conflicts:
t/t9600-cvsimport.sh
|
|
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests in detached-stash are calling test_must_fail
in such a way that the arguments to test_must_fail do, indeed, fail
but not in the manner expected by the test.
This patch removes the unnecessary and unhelpful double quotes.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adds new tests which check that:
* git stash branch handles a stash-like argument when there is a stash stack
* git stash branch handles a stash-like argument when there is not a stash stack
* git stash show handles a stash-like argument when there is a stash stack
* git stash show handles a stash-like argument when there is not a stash stack
* git stash drop fails early if the specified argument is not a stash reference
* git stash pop fails early if the specified argument is not a stash reference
* git stash * fails early if the reference supplied is bogus
* git stash fails early with stash@{n} where n >= length of stash log
Helped-by: Johannes Sixt
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
|
|
In tests, call test_cmp rather than raw diff where possible (i.e. if
the output does not go to a pipe), to allow the use of, say, 'cmp'
when the default 'diff -u' is not compatible with a vendor diff.
When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a file is removed from the index and then modified in the working
tree then stash will discard the working tree file with no way to
recover the changes.
This can might be done in one of a number of ways.
git rm file
vi file # edit a new version
git stash
or with git mv
git mv file newfile
vi file # make a new file with the old name
git stash
Signed-off-by: Charles Bailey <charles@hashpling.org>
|
|
The 'git stash pop' option parsing used to remove the first argument
in --index mode. At the time this was implemented, this first
argument was always --index. However, since the invention of the -q
option in fcdd0e9 (stash: teach quiet option, 2009-06-17) you can
cause an internal invocation of
git stash drop --index
by running
git stash pop -q --index
which then of course fails because drop doesn't know --index.
To handle this, instead let 'git stash apply' decide what the future
argument to 'drop' should be.
Warning: this means that 'git stash apply' must parse all options that
'drop' can take, and deal with them in the same way. This is
currently true for its only option -q.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the earlier DWIM patches, certain combination of options defaulted
to the "save" command correctly while certain equally valid combination
did not. For example, "git stash -k" were Ok but "git stash -q -k" did
not work.
This makes the logic of defaulting to "save" much simpler. If there are no
non-flag arguments, it is clear that there is no command word, and we
default to "save" subcommand. This rule prevents "git stash -q apply"
from quietly creating a stash with "apply" as the message.
This also teaches "git stash save" to reject an unknown option. This is
to keep a mistyped "git stash save --quite" from creating a stash with a
message "--quite", and this safety is more important with the new logic
to default to "save" with any option-looking argument without an explicit
comand word.
[jc: this is based on Matthieu's 3-patch series, and a follow-up
discussion, and he and Peff take all the credit; if I have introduced bugs
while reworking, they are mine.]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To save me from the carpal tunnel syndrome, make 'git stash' accept
the short option '-k' instead of '--keep-index', and for even more
convenience, let's DWIM when this developer forgot to type the 'save'
command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach stash pop, apply, save, and drop to be quiet when told. By using
the quiet option (-q), these actions will be silent unless errors are
encountered.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Converts tests between t0050-t3903.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure that applying the stash to a new branch after a conflicting
change doesn't result in an error when you try to commit.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These violations are simply wrong, but were never caught
because whitespace policy checking is turned off in the test
scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Øystein Walle
Petr Baudis
Ramkumar Ramachandra
Johannes Sixt
Jiang Xin
Zbigniew Jędrzejewski-Szmek
Jonathan Nieder
Nguyễn Thái Ngọc Duy
Jonathon Mah
Thomas Rast
Dmitry Ivankov
Dan McGee
Jon Seymour
Piotr Krukowiecki
Tomas Carnecky
Brian Gernhardt
Brandon Casey
Jens Lehmann
Gary V. Vaughan
Charles Bailey
Matthieu Moy
Johannes Schindelin
Stephen Boyd
Nanako Shiraishi
Abhijit Menon-Sen