summaryrefslogtreecommitdiff
path: root/t/t3700-add.sh
AgeCommit message (Collapse)AuthorFilesLines
2008-09-30tests: grep portability fixesLibravatar Jeff King1-1/+1
We try to avoid using the "-q" or "-e" options, as they are largely useless, as explained in aadbe44f. There is one exception for "-e" here, which is in t7701 used to produce an "or" of patterns. This can be rewritten as an egrep pattern. This patch also removes use of "grep -F" in favor of the more widely available "fgrep". [sp: Tested on AIX 5.3 by Mike Ralphson, Tested on MinGW by Johannes Sixt] Signed-off-by: Jeff King <peff@peff.net> Tested-by: Mike Ralphson <mike@abacus.co.uk> Tested-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-08-15Fix t3700 on filesystems which do not support question marks in namesLibravatar Alex Riesen1-4/+4
Use square brackets instead. And the prominent example of the deficiency are, as usual, the filesystems of Microsoft house. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-13Merge branch 'maint'Libravatar Junio C Hamano1-0/+8
* maint: t5304-prune: adjust file mtime based on system time rather than file mtime Fix escaping of glob special characters in pathspecs
2008-08-13Fix escaping of glob special characters in pathspecsLibravatar Kevin Ballard1-0/+8
match_one implements an optimized pathspec match where it only uses fnmatch if it detects glob special characters in the pattern. Unfortunately it didn't treat \ as a special character, so attempts to escape a glob special character would fail even though fnmatch() supports it. Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-2/+2
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-21Merge branch 'ar/add-unreadable'Libravatar Junio C Hamano1-0/+43
* ar/add-unreadable: Add a config option to ignore errors for git-add Add a test for git-add --ignore-errors Add --ignore-errors to git-add to allow it to skip files with read errors Extend interface of add_files_to_cache to allow ignore indexing errors Make the exit code of add_file_to_index actually useful
2008-05-13fix bsd shell negationLibravatar Jeff King1-3/+3
On some shells (notably /bin/sh on FreeBSD 6.1), the construct foo && ! bar | baz is true if foo && baz whereas for most other shells (such as bash) is true if foo && ! baz We can work around this by specifying foo && ! (bar | baz) which works everywhere. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-12Add a config option to ignore errors for git-addLibravatar Alex Riesen1-0/+21
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-12Add a test for git-add --ignore-errorsLibravatar Alex Riesen1-0/+22
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-16Fix per-directory exclude handing for "git add"Libravatar Junio C Hamano1-0/+24
In "dir_struct", each exclusion element in the exclusion stack records a base string (pointer to the beginning with length) so that we can tell where it came from, but this pointer is just pointing at the parameter that is given by the caller to the push_exclude_per_directory() function. While read_directory_recursive() runs, calls to excluded() makes use the data in the exclusion elements, including this base string. The caller of read_directory_recursive() is not supposed to free the buffer it gave to push_exclude_per_directory() earlier, until it returns. The test case Bruce Stephens gave in the mailing list discussion was simplified and added to the t3700 test. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-13git-add: Add support for --refresh option.Libravatar Alexandre Julliard1-0/+12
This allows to refresh only a subset of the project files, based on the specified pathspecs. Signed-off-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-03Fix bogus use of printf in t3700 testLibravatar Junio C Hamano1-2/+2
The hashed contents did not matter in the end result, but it passed an uninitialized variable to printf, which caused it to emit empty while giving an error/usage message. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-35/+35
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Test 'git add' for unmerged entries when core.symlinks=false.Libravatar Johannes Sixt1-10/+17
In 20314271679e169f324c118c69c8d9e0399feec9 git add was fixed if unmerged entries are in the index and core.filemode=false. core.symlinks=false is a similar case, which touches the same code path. Here is a test that makes sure that the symlink property in the index is preserved, too. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-01git add: respect core.filemode with unmerged entriesLibravatar Johannes Schindelin1-0/+26
When a merge left unmerged entries, git add failed to pick up the file mode from the index, when core.filemode == 0. If more than one unmerged entry is there, the order of stage preference is 2, 1, 3. Noticed by Johannes Sixt. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-23dir.c(common_prefix): Fix two bugsLibravatar Johannes Schindelin1-0/+6
The function common_prefix() is used to find the common subdirectory of a couple of pathnames. When checking if the next pathname matches up with the prefix, it incorrectly checked the whole path, not just the prefix (including the slash). Thus, the expensive part of the loop was executed always. The other bug is more serious: if the first and the last pathname in the list have a longer common prefix than the common prefix for _all_ pathnames in the list, the longer one would be chosen. This bug was probably hidden by the fact that bash's wildcard expansion sorts the results, and the code just so happens to work with sorted input. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-16Do not take mode bits from index after type change.Libravatar Junio C Hamano1-0/+20
When we do not trust executable bit from lstat(2), we copied existing ce_mode bits without checking if the filesystem object is a regular file (which is the only thing we apply the "trust executable bit" business) nor if the blob in the index is a regular file (otherwise, we should do the same as registering a new regular file, which is to default non-executable). Noticed by Johannes Sixt. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28[PATCH] Rename git-repo-config to git-config.Libravatar Tom Prince1-3/+3
Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-29Fix 'git add' with .gitignoreLibravatar Junio C Hamano1-0/+33
When '*.ig' is ignored, and you have two files f.ig and d.ig/foo in the working tree, $ git add . correctly ignored f.ig but failed to ignore d.ig/foo. This was caused by a thinko in an earlier commit 4888c534, when we tried to allow adding otherwise ignored files. After reverting that commit, this takes a much simpler approach. When we have an unmatched pathspec that talks about an existing pathname, we know it is an ignored path the user tried to add, so we include it in the set of paths directory walker returned. This does not let you say "git add -f D" on an ignored directory D and add everything under D. People can submit a patch to further allow it if they want to, but I think it is a saner behaviour to require explicit paths to be spelled out in such a case. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-22trust-executable-bit: fix breakage for symlinksLibravatar Junio C Hamano1-2/+12
An earlier commit f28b34a broke symlinks when trust-executable-bit is not set because it incorrectly assumed that everything was a regular file. Reported by Juergen Ruehle. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27Corrected copy-and-paste thinko in ignore executable bit test case.Libravatar Shawn Pearce1-1/+1
This test should be testing update-index --add, not git-add as the latter is implemented in terms of the former. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-26Ignore executable bit when adding files if filemode=0.Libravatar Shawn Pearce1-0/+22
If the user has configured core.filemode=0 then we shouldn't set the execute bit in the index when adding a new file as the user has indicated that the local filesystem can't be trusted. This means that when adding files that should be marked executable in a repository with core.filemode=0 the user must perform a 'git update-index --chmod=+x' on the file before committing the addition. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-21git-add: Add support for --, documentation, and test.Libravatar Carl Worth1-0/+22
This adds support to git-add to allow the common -- to separate command-line options and file names. It adds documentation and a new git-add test case as well. [jc: this should apply to 1.2.X maintenance series, so I reworked git-ls-files --error-unmatch test. ] Signed-off-by: Junio C Hamano <junkio@cox.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 02:58:59 +0000