summaryrefslogtreecommitdiff
path: root/t/t3700-add.sh
AgeCommit message (Collapse)AuthorFilesLines
2011-04-13i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014Libravatar Junio C Hamano1-5/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-add "did not match any files" messageLibravatar Ævar Arnfjörð Bjarmason1-2/+6
Make the "did not match any files" message translatable, and skip the test that checks for it when the C_LOCALE_OUTPUT prereq is not present. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-add "The following paths are ignored" messageLibravatar Ævar Arnfjörð Bjarmason1-1/+4
The tests t2204 (.gitignore) and t3700 (add) explicitly check for these messages, so while at it, split each relevant test into a part that just checks "git add"'s exit status and a part that checks porcelain output. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-18tests: A SANITY test prereq for testing if we're rootLibravatar Ævar Arnfjörð Bjarmason1-5/+5
Some tests depend on not being able to write to files after chmod -w. This doesn't work when running the tests as root. Change test-lib.sh to test if this works, and if so it sets a new SANITY test prerequisite. The tests that use this previously failed when run under root. There was already a test for this in t3600-rm.sh, added by Junio C Hamano in 2283645 in 2006. That check now uses the new SANITY prerequisite. Some of this was resurrected from the "Tests in Cygwin" thread in May 2009: http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385 Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-25t3700-add: fix dependence on stdout and stderr bufferingLibravatar Johannes Sixt1-3/+6
One test case checked the stdout and stderr of 'git add' by constructing a single 'expect' file that contained both streams. But when the command runs, the order of stdout and stderr output is unpredictable because it depends on how the streams are buffered. At least on Windows, the buffering is different from what the test case expected. Hence, check the two output texts separately. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-20t/t3700: convert two uses of negation operator '!' to use test_must_failLibravatar Brandon Casey1-2/+2
These two lines use the negation '!' operator to negate the result of a simple command. Since these commands do not contain any pipes or other complexities, the test_must_fail function can be used and is preferred since it will additionally detect termination due to a signal. This was noticed because the second use of '!' does not include a space between the '!' and the opening parens. Ksh interprets this as follows: !(pattern-list) Matches anything except one of the given patterns. Ksh performs a file glob using the pattern-list and then tries to execute the first file in the list. If a space is added between the '!' and the open parens, then Ksh will not interpret it as a pattern list, but in this case, it is preferred to use test_must_fail, so lets do so. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-12git add: Add the "--ignore-missing" option for the dry runLibravatar Jens Lehmann1-0/+25
Sometimes it is useful to know if a file or directory will be ignored before it is added to the work tree. An example is "git submodule add", where it would be really nice to be able to fail with an appropriate error message before the submodule is cloned and checked out. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25tests: Say "pass" rather than "ok" on empty lines for TAPLibravatar Ævar Arnfjörð Bjarmason1-6/+6
Lines that begin with "ok" confuse the TAP harness because it can't distinguish them from a test counter. Work around the issue by saying "pass" instead, which isn't a reserved TAP word. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-16test for add with non-existent pathspecLibravatar Chris Packham1-0/+5
Add a test for 'git add -u pathspec' and 'git add pathspec' where pathspec does not exist. The expected result is that git add exits with an error message and an appropriate exit code. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-22Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: t3700-add: add a POSIXPERM prerequisite to a new test
2009-06-22t3700-add: add a POSIXPERM prerequisite to a new testLibravatar Johannes Sixt1-1/+1
The new test does a 'chmod 0', which does not have the intended effect on Windows. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-22Merge branch 'sb/maint-1.6.0-add-config-fix' into maintLibravatar Junio C Hamano1-0/+13
* sb/maint-1.6.0-add-config-fix: add: allow configurations to be overriden by command line
2009-06-20Merge branch 'sb/maint-1.6.0-add-config-fix'Libravatar Junio C Hamano1-0/+13
* sb/maint-1.6.0-add-config-fix: add: allow configurations to be overriden by command line use xstrdup, not strdup in ll-merge.c Conflicts: builtin-add.c
2009-06-18add: allow configurations to be overriden by command lineLibravatar Stephen Boyd1-0/+13
Don't call git_config after parsing the command line options, otherwise the config settings will override any settings made by the command line. This can be seen by setting add.ignore_errors and then specifying --no-ignore-errors when using git-add. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-31git-add: no need for -f when resolving a conflict in already tracked pathLibravatar Jeff King1-0/+12
When a path F that matches ignore pattern has a conflict, "git add F" insisted the -f option be given, which did not make sense. It would have required -f when the path was originally added, but when resolving a conflict, it already is tracked. So this should work (and does): $ echo file >.gitignore $ echo content >file $ git add -f file ;# need -f because we are adding new path $ echo more content >>file $ git add file ;# don't need -f; it is not actually an "other" file This is handled under the hood by the COLLECT_IGNORED option to read_directory. When that code finds an ignored file, it checks the index to make sure it is not actually a tracked file. However, the test it uses does not take into account unmerged entries, and considers them to still be ignored. "git ls-files" uses a more elaborate test and gets the right answer and the same test should be used here. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-22t3700: Skip a test with backslashes in pathspecLibravatar Johannes Sixt1-1/+1
The test verifies that glob special characters can be escaped with backslashes. In particular, the string fo\[ou\]bar is given to git. On Windows, this does not work because backslashes are first of all directory separators, and first thing git does with a pathspec from the command line is to convert backslashes to forward slashes. Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-22Skip tests that require a filesystem that obeys POSIX permissionsLibravatar Johannes Sixt1-4/+4
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-22Use prerequisite tags to skip tests that depend on symbolic linksLibravatar Johannes Sixt1-3/+3
Many tests depend on that symbolic links work. This introduces a check that sets the prerequisite tag SYMLINKS if the file system supports symbolic links. Since so many tests have to check for this prerequisite, we do the check in test-lib.sh, so that we don't need to repeat the test in many scripts. To check for 'ln -s' failures, you can use a FAT partition on Linux: $ mkdosfs -C git-on-fat 1000000 $ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt Clone git to /mnt and $ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7 t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \ make test (These additionally skipped tests depend on POSIX permissions that FAT on Linux does not provide.) Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2008-09-30tests: grep portability fixesLibravatar Jeff King1-1/+1
We try to avoid using the "-q" or "-e" options, as they are largely useless, as explained in aadbe44f. There is one exception for "-e" here, which is in t7701 used to produce an "or" of patterns. This can be rewritten as an egrep pattern. This patch also removes use of "grep -F" in favor of the more widely available "fgrep". [sp: Tested on AIX 5.3 by Mike Ralphson, Tested on MinGW by Johannes Sixt] Signed-off-by: Jeff King <peff@peff.net> Tested-by: Mike Ralphson <mike@abacus.co.uk> Tested-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-08-15Fix t3700 on filesystems which do not support question marks in namesLibravatar Alex Riesen1-4/+4
Use square brackets instead. And the prominent example of the deficiency are, as usual, the filesystems of Microsoft house. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-13Merge branch 'maint'Libravatar Junio C Hamano1-0/+8
* maint: t5304-prune: adjust file mtime based on system time rather than file mtime Fix escaping of glob special characters in pathspecs
2008-08-13Fix escaping of glob special characters in pathspecsLibravatar Kevin Ballard1-0/+8
match_one implements an optimized pathspec match where it only uses fnmatch if it detects glob special characters in the pattern. Unfortunately it didn't treat \ as a special character, so attempts to escape a glob special character would fail even though fnmatch() supports it. Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-2/+2
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-21Merge branch 'ar/add-unreadable'Libravatar Junio C Hamano1-0/+43
* ar/add-unreadable: Add a config option to ignore errors for git-add Add a test for git-add --ignore-errors Add --ignore-errors to git-add to allow it to skip files with read errors Extend interface of add_files_to_cache to allow ignore indexing errors Make the exit code of add_file_to_index actually useful
2008-05-13fix bsd shell negationLibravatar Jeff King1-3/+3
On some shells (notably /bin/sh on FreeBSD 6.1), the construct foo && ! bar | baz is true if foo && baz whereas for most other shells (such as bash) is true if foo && ! baz We can work around this by specifying foo && ! (bar | baz) which works everywhere. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-12Add a config option to ignore errors for git-addLibravatar Alex Riesen1-0/+21
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-12Add a test for git-add --ignore-errorsLibravatar Alex Riesen1-0/+22
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-16Fix per-directory exclude handing for "git add"Libravatar Junio C Hamano1-0/+24
In "dir_struct", each exclusion element in the exclusion stack records a base string (pointer to the beginning with length) so that we can tell where it came from, but this pointer is just pointing at the parameter that is given by the caller to the push_exclude_per_directory() function. While read_directory_recursive() runs, calls to excluded() makes use the data in the exclusion elements, including this base string. The caller of read_directory_recursive() is not supposed to free the buffer it gave to push_exclude_per_directory() earlier, until it returns. The test case Bruce Stephens gave in the mailing list discussion was simplified and added to the t3700 test. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-13git-add: Add support for --refresh option.Libravatar Alexandre Julliard1-0/+12
This allows to refresh only a subset of the project files, based on the specified pathspecs. Signed-off-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-03Fix bogus use of printf in t3700 testLibravatar Junio C Hamano1-2/+2
The hashed contents did not matter in the end result, but it passed an uninitialized variable to printf, which caused it to emit empty while giving an error/usage message. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-35/+35
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Test 'git add' for unmerged entries when core.symlinks=false.Libravatar Johannes Sixt1-10/+17
In 20314271679e169f324c118c69c8d9e0399feec9 git add was fixed if unmerged entries are in the index and core.filemode=false. core.symlinks=false is a similar case, which touches the same code path. Here is a test that makes sure that the symlink property in the index is preserved, too. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-01git add: respect core.filemode with unmerged entriesLibravatar Johannes Schindelin1-0/+26
When a merge left unmerged entries, git add failed to pick up the file mode from the index, when core.filemode == 0. If more than one unmerged entry is there, the order of stage preference is 2, 1, 3. Noticed by Johannes Sixt. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-23dir.c(common_prefix): Fix two bugsLibravatar Johannes Schindelin1-0/+6
The function common_prefix() is used to find the common subdirectory of a couple of pathnames. When checking if the next pathname matches up with the prefix, it incorrectly checked the whole path, not just the prefix (including the slash). Thus, the expensive part of the loop was executed always. The other bug is more serious: if the first and the last pathname in the list have a longer common prefix than the common prefix for _all_ pathnames in the list, the longer one would be chosen. This bug was probably hidden by the fact that bash's wildcard expansion sorts the results, and the code just so happens to work with sorted input. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-16Do not take mode bits from index after type change.Libravatar Junio C Hamano1-0/+20
When we do not trust executable bit from lstat(2), we copied existing ce_mode bits without checking if the filesystem object is a regular file (which is the only thing we apply the "trust executable bit" business) nor if the blob in the index is a regular file (otherwise, we should do the same as registering a new regular file, which is to default non-executable). Noticed by Johannes Sixt. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28[PATCH] Rename git-repo-config to git-config.Libravatar Tom Prince1-3/+3
Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-29Fix 'git add' with .gitignoreLibravatar Junio C Hamano1-0/+33
When '*.ig' is ignored, and you have two files f.ig and d.ig/foo in the working tree, $ git add . correctly ignored f.ig but failed to ignore d.ig/foo. This was caused by a thinko in an earlier commit 4888c534, when we tried to allow adding otherwise ignored files. After reverting that commit, this takes a much simpler approach. When we have an unmatched pathspec that talks about an existing pathname, we know it is an ignored path the user tried to add, so we include it in the set of paths directory walker returned. This does not let you say "git add -f D" on an ignored directory D and add everything under D. People can submit a patch to further allow it if they want to, but I think it is a saner behaviour to require explicit paths to be spelled out in such a case. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-22trust-executable-bit: fix breakage for symlinksLibravatar Junio C Hamano1-2/+12
An earlier commit f28b34a broke symlinks when trust-executable-bit is not set because it incorrectly assumed that everything was a regular file. Reported by Juergen Ruehle. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27Corrected copy-and-paste thinko in ignore executable bit test case.Libravatar Shawn Pearce1-1/+1
This test should be testing update-index --add, not git-add as the latter is implemented in terms of the former. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-26Ignore executable bit when adding files if filemode=0.Libravatar Shawn Pearce1-0/+22
If the user has configured core.filemode=0 then we shouldn't set the execute bit in the index when adding a new file as the user has indicated that the local filesystem can't be trusted. This means that when adding files that should be marked executable in a repository with core.filemode=0 the user must perform a 'git update-index --chmod=+x' on the file before committing the addition. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-21git-add: Add support for --, documentation, and test.Libravatar Carl Worth1-0/+22
This adds support to git-add to allow the common -- to separate command-line options and file names. It adds documentation and a new git-add test case as well. [jc: this should apply to 1.2.X maintenance series, so I reworked git-ls-files --error-unmatch test. ] Signed-off-by: Junio C Hamano <junkio@cox.net>