| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Carefully excluding t3404, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t34*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t34*.sh &&
git checkout HEAD -- t34\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fast forwarding, `git --merge' should act the same whether
`rebase.abbreviateCommands' is set or not, but so far it was not the
case. This duplicates the tests ensuring that `--merge' works when fast
forwarding to check if it also works with abbreviated commands.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have many rebase tests in the testsuite, and often the same test is
repeated multiple times just testing different backends. For those
tests that were specifically trying to test the am backend, add the --am
flag.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the past, we dis-allowed rebases using the interactive backend from
performing a fast-forward to short-circuit the rebase operation. This
made sense for explicitly interactive rebases and some implicitly
interactive rebases, but certainly became overly stringent when the
merge backend was re-implemented via the interactive backend.
Just as the am-based rebase has always had to disable the fast-forward
based on a variety of conditions or flags (e.g. --signoff, --whitespace,
etc.), we need to do the same but now with a few more options. However,
continuing to use REBASE_FORCE for tracking this is problematic because
the interactive backend used it for a different purpose. (When
REBASE_FORCE wasn't set, the interactive backend would not fast-forward
the whole series but would fast-forward individual "pick" commits at the
beginning of the todo list, and then a squash or something would cause
it to start generating new commits.) So, introduce a new
allow_preemptive_ff flag contained within cmd_rebase() and use it to
track whether we are going to allow a pre-emptive fast-forward that
short-circuits the whole rebase.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t3432 had several stress tests for can_fast_forward(), whose intent was
to ensure we were using the optimization of just fast forwarding when
possible. However, these tests verified that fast forwards had happened
based on the output that rebase printed to the terminal. We can instead
test more directly that we actually fast-forwarded by checking the
reflog, which also has the side effect of making the tests applicable
for the merge/interactive backend.
This change does lose the distinction between "noop" and "noop-force",
but as stated in commit c9efc216830f ("t3432: test for --no-ff's
interaction with fast-forward", 2019-08-27) which introduced that
distinction: "These tests aren't supposed to endorse the status quo,
just test for what we're currently doing.".
This change does not actually run these tests with the merge/interactive
backend; instead this is just a preparatory commit. A subsequent commit
which fixes can_fast_forward() to work with that backend will then also
change t3432 to add tests of that backend as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the case where we are using test_cmp_rev() to report not-equals, we
write `! test_cmp_rev`. However, since test_cmp_rev() contains
r1=$(git rev-parse --verify "$1") &&
r2=$(git rev-parse --verify "$2") &&
`! test_cmp_rev` will succeed if any of the rev-parses fail. This
behavior is not desired. We want the rev-parses to _always_ be
successful.
Rewrite test_cmp_rev() to optionally accept "!" as the first argument to
do a not-equals comparison. Rewrite `! test_cmp_rev` to `test_cmp_rev !`
in all tests to take advantage of this new functionality.
Also, rewrite the rev-parse logic to end with a `|| return 1` instead of
&&-chaining into the rev-comparison logic. This makes it obvious to
future readers that we explicitly intend on returning early if either of
the rev-parses fail.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common scenario is if a user is working on a topic branch and they
wish to make some changes to intermediate commits or autosquash, they
would run something such as
git rebase -i --onto master... master
in order to preserve the merge base. This is useful when contributing a
patch series to the Git mailing list, one often starts on top of the
current 'master'. While developing the patches, 'master' is also
developed further and it is sometimes not the best idea to keep rebasing
on top of 'master', but to keep the base commit as-is.
In addition to this, a user wishing to test individual commits in a
topic branch without changing anything may run
git rebase -x ./test.sh master... master
Since rebasing onto the merge base of the branch and the upstream is
such a common case, introduce the --keep-base option as a shortcut.
This allows us to rewrite the above as
git rebase -i --keep-base master
and
git rebase -x ./test.sh --keep-base master
respectively.
Add tests to ensure --keep-base works correctly in the normal case and
fails when there are multiple merge bases, both in regular and
interactive mode. Also, test to make sure conflicting options cause
rebase to fail. While we're adding test cases, add a missing
set_fake_editor call to 'rebase -i --onto master...side'.
While we're documenting the --keep-base option, change an instance of
"merge-base" to "merge base", which is the consistent spelling.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before, when we rebased with a --fork-point invocation where the
fork-point wasn't empty, we would be setting options.restrict_revision.
The fast-forward logic would automatically declare that the rebase was
not fast-forwardable if it was set. However, this was painting with a
very broad brush.
Refine the logic so that we can fast-forward in the case where the
restricted revision is equal to the merge base, since we stop rebasing
at the merge base anyway.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before, when we had the following graph,
A---B---C (master)
\
D (side)
running 'git rebase --onto master... master side' would result in D
being always rebased, no matter what. However, the desired behavior is
that rebase should notice that this is fast-forwardable and do that
instead.
Add detection to `can_fast_forward` so that this case can be detected
and a fast-forward will be performed. First of all, rewrite the function
to use gotos which simplifies the logic. Next, since the
options.upstream &&
!oidcmp(&options.upstream->object.oid, &options.onto->object.oid)
conditions were removed in `cmd_rebase`, we reintroduce a substitute in
`can_fast_forward`. In particular, checking the merge bases of
`upstream` and `head` fixes a failing case in t3416.
The abbreviated graph for t3416 is as follows:
F---G topic
/
A---B---C---D---E master
and the failing command was
git rebase --onto master...topic F topic
Before, Git would see that there was one merge base (C), and the merge
and onto were the same so it would incorrectly return 1, indicating that
we could fast-forward. This would cause the rebased graph to be 'ABCFG'
when we were expecting 'ABCG'.
With the additional logic, we detect that upstream and head's merge base
is F. Since onto isn't F, it means we're not rebasing the full set of
commits from master..topic. Since we're excluding some commits, a
fast-forward cannot be performed and so we correctly return 0.
Add '-f' to test cases that failed as a result of this change because
they were not expecting a fast-forward so that a rebase is forced.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add more stress tests for the can_fast_forward() case in
rebase.c. These tests are getting rather verbose, but now we can see
under --ff and --no-ff whether we skip work, or whether we're forced
to run the rebase.
These tests aren't supposed to endorse the status quo, just test for
what we're currently doing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change "same head" introduced in the preceding commit to check whether
the rebase.c code lands in the can_fast_forward() case in, and thus
prints out an "is up to date" and aborts early.
In some of these cases we make it past that and to "rewinding head",
then do a rebase, only to find out there's nothing to change so HEAD
stays at the same OID.
These tests presumed these two cases were the same thing. In terms of
where HEAD ends up they are, but we're not only interested in rebase
semantics, but also whether or not we're needlessly doing work when we
could avoid it entirely.
I'm adding "same" and "diff" here because I'll follow-up and add
--no-ff tests, where some of those will be "diff"-erent, so add the
"diff" code already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rebase is run on a branch that can be fast-forwarded, this should
automatically be done. Create test to ensure this behavior happens.
There are some cases that currently don't pass. The first case is where
a feature and master have diverged, running
"git rebase master... master" causes a full rebase to happen even though
a fast-forward should happen.
The second case is when we are doing "git rebase --fork-point" and a
fork-point commit is found. Once again, a full rebase happens even
though a fast-forward should happen.
Mark these cases as failure so we can fix it later.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Han-Wen Nienhuys
Alban Gruin
Elijah Newren
Denton Liu
Ævar Arnfjörð Bjarmason