| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have many rebase tests in the testsuite, and often the same test is
repeated multiple times just testing different backends. For those
tests that were specifically trying to test the am backend, add the --am
flag.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When doing 'git rebase --autostash <upstream> <master>' with a dirty worktree
a 'HEAD is now at ...' message is emitted, which is pointless as it refers to
the old active branch which isn't actually moved.
This commit removes the 'HEAD is now at...' message.
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consider the following scenario:
git checkout not-the-master
work work work
git rebase --autostash upstream master
Here 'rebase --autostash <upstream> <branch>' incorrectly moves the
active branch (not-the-master) to master (before the rebase).
The expected behavior: (58794775:/git-rebase.sh:526)
AUTOSTASH=$(git stash create autostash)
git reset --hard
git checkout master
git rebase upstream
git stash apply $AUTOSTASH
The actual behavior: (6defce2b:/builtin/rebase.c:1062)
AUTOSTASH=$(git stash create autostash)
git reset --hard master
git checkout master
git rebase upstream
git stash apply $AUTOSTASH
This commit reinstates the 'legacy script' behavior as introduced with
58794775: rebase: implement --[no-]autostash and rebase.autostash
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of the tests check the output of rebase is what we expect. These
were added after a regression that added unwanted stash output when
using --autostash. They are useful as they prevent unintended changes to
the output of the various rebase commands. However they also include all
the progress output which is less useful as it only tests what would be
written to a dumb terminal which is not the normal use case. The recent
changes to fix clearing the line when printing progress necessarily
meant making an ugly change to these tests. Address this my removing the
progress output before comparing it to the expected output. We do this
by removing everything before the final "\r" on each line as we don't
care about the progress indicator, but we do care about what is printed
immediately after it.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running a command with the 'exec' instruction during an
interactive rebase session, or for a range of commits using 'git
rebase -x', the output can be a bit garbled when the name of the
command is short enough:
$ git rebase -x true HEAD~5
Executing: true
Executing: true
Executing: true
Executing: true
Executing: true)
Successfully rebased and updated refs/heads/master.
Note the ')' at the end of the last line. It gets more garbled as the
range of commits increases:
$ git rebase -x true HEAD~50
Executing: true)
[ repeated 3 more times ]
Executing: true0)
[ repeated 44 more times ]
Executing: true00)
Successfully rebased and updated refs/heads/master.
Those extra numbers and ')' are remnants of the previously displayed
"Rebasing (N/M)" progress lines that are usually completely
overwritten by the "Executing: <cmd>" lines, unless 'cmd' is short and
the "N/M" part is long.
Make sure that the previously displayed "Rebasing (N/M)" line is
cleared by using the term_clear_line() helper function added in the
previous patch. Do so only when not being '--verbose', because in
that case these "Rebasing (N/M)" lines are not printed as progress
(i.e. as lines with '\r' at the end), but as "regular" output (with
'\n' at the end).
A couple of other rebase commands print similar messages, e.g.
"Stopped at <abbrev-oid>... <subject>" for the 'edit' or 'break'
commands, or the "Successfully rebased and updated <full-ref>." at the
very end. These are so long that they practically always overwrite
that "Rebasing (N/M)" progress line, but let's be prudent, and clear
the last line before printing these, too.
In 't3420-rebase-autostash.sh' two helper functions prepare the
expected output of four tests that check the full output of 'git
rebase' and thus are affected by this change, so adjust their
expectations to account for the new line clearing.
Note that this patch doesn't completely eliminate the possibility of
similar garbled outputs, e.g. some error messages from rebase or the
"Auto-merging <file>" message from within the depths of the merge
machinery might not be long enough to completely cover the last
"Rebasing (N/M)" line. This patch doesn't do anything about them,
because dealing with them individually would result in way too much
churn, while having a catch-all term_clear_line() call in the common
code path of pick_commits() would hide the "Rebasing (N/M)" line way
too soon, and it would either flicker or be invisible.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of an ongoing effort to make rebase have more uniform behavior,
modify the merge backend to behave like the interactive one, by
re-implementing it on top of the latter.
Interactive rebases are implemented in terms of cherry-pick rather than
the merge-recursive builtin, but cherry-pick also calls into the
recursive merge machinery by default and can accept special merge
strategies and/or special strategy options. As such, there really is
not any need for having both git-rebase--merge and
git-rebase--interactive anymore. Delete git-rebase--merge.sh and
instead implement it in builtin/rebase.c.
This results in a few deliberate but small user-visible changes:
* The progress output is modified (see t3406 and t3420 for examples)
* A few known test failures are now fixed (see t3421)
* bash-prompt during a rebase --merge is now REBASE-i instead of
REBASE-m. Reason: The prompt is a reflection of the backend in use;
this allows users to report an issue to the git mailing list with
the appropriate backend information, and allows advanced users to
know where to search for relevant control files. (see t9903)
testcase modification notes:
t3406: --interactive and --merge had slightly different progress output
while running; adjust a test to match the new expectation
t3420: these test precise output while running, but rebase--am,
rebase--merge, and rebase--interactive all were built on very
different commands (am, merge-recursive, cherry-pick), so the
tests expected different output for each type. Now we expect
--merge and --interactive to have the same output.
t3421: --interactive fixes some bugs in --merge! Wahoo!
t9903: --merge uses the interactive backend so the prompt expected is
now REBASE-i.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --autostash" did not correctly re-attach the HEAD at times.
* js/rebase-autostash-detach-fix:
built-in rebase --autostash: leave the current branch alone if possible
built-in rebase: demonstrate regression with --autostash
|
|
When we converted a `git reset --hard` call in the original Unix shell
script to built-in code, we asked to reset the worktree and the index
and explicitly *not* to detach the HEAD. By mistake, though, we still
did. Let's fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An unnamed colleague of Ævar Arnfjörð Bjarmason reported a breakage
where a `pull --rebase` (which did not really need to do anything but
stash, see that nothing was changed, and apply the stash again) also
detached the HEAD.
This patch adds a minimal reproducer for this regression.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" that has recently been rewritten in C had a few issues
in its "--autstash" feature, which have been corrected.
* js/rebase-autostash-fix:
rebase --autostash: fix issue with dirty submodules
rebase --autostash: demonstrate a problem with dirty submodules
rebase (autostash): use an explicit OID to apply the stash
rebase (autostash): store the full OID in <state-dir>/autostash
rebase (autostash): avoid duplicate call to state_dir_path()
|
|
Since we cannot stash dirty submodules, there is no use in requiring
them to be clean (or stash them when they are not).
This brings the built-in rebase in line with the previous, scripted
version, which also did not care about dirty submodules (but it was
admittedly not very easy to figure that out).
This fixes https://github.com/git-for-windows/git/issues/1820
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It has been reported that dirty submodules cause problems with the
built-in rebase when it is asked to autostash. The symptom is:
fatal: Unexpected stash response: ''
This patch adds a regression test that demonstrates that bug.
Original report: https://github.com/git-for-windows/git/issues/1820
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several tests in 't3420-rebase-autostash.sh' start various rebase
processes that are expected to fail because of merge conflicts. These
tests then run '! grep' to ensure that the autostash feature did its
job, and the dirty contents of a file is gone. However, due to the
test repo's history and the choice of upstream branch that file
shouldn't exist in the conflicted state at all. Consequently, this
'grep' doesn't fail as expected, because it can't find the dirty
content, but it fails because it can't open the file.
Tighten this check by using 'test_path_is_missing' instead, thereby
avoiding unexpected errors from 'grep' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Newly added tests to t3420 in this series prepare expected
human-readable output from "git rebase -i" and then compare the
actual output with it. As the output from the command is designed
to go through i18n/l10n, we need to use test_i18ncmp to tell
GETTEXT_POISON build that it is OK the output does not match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check the console output when using --autostash and the stash does not
apply is what we expect. The test is quite strict but should catch any
changes to the console output from the various rebase flavors.
Thanks-to: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check the console output when using --autostash and the stash applies
cleanly is what we expect. The test is quite strict but should catch
any changes to the console output from the various rebase flavors.
Thanks-to: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
<BAD> <CORRECTED>
accidently accidentally
commited committed
dependancy dependency
emtpy empty
existance existence
explicitely explicitly
git-upload-achive git-upload-archive
hierachy hierarchy
indegee indegree
intial initial
mulitple multiple
non-existant non-existent
precendence. precedence.
priviledged privileged
programatically programmatically
psuedo-binary pseudo-binary
soemwhere somewhere
successfull successful
transfering transferring
uncommited uncommitted
unkown unknown
usefull useful
writting writing
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we abort an interactive rebase we do so by calling
`die_abort`, which cleans up after us by removing the rebase
state directory. If the user has requested to use the autostash
feature, though, the state directory may also contain a reference
to the autostash, which will now be deleted.
Fix the issue by trying to re-apply the autostash in `die_abort`.
This will also handle the case where the autostash does not apply
cleanly anymore by recording it in a user-visible stash.
Reported-by: Daniel Hahler <git@thequod.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is documented as an option but we don't actually accept it.
Support it so that it is possible to override the "rebase.autostash"
config variable.
Reported-by: Daniel Hahler <genml+git-2014@thequod.de>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the following case
$ git rebase master
Current branch autostash-fix is up to date.
the autostash is not applied automatically, because this codepath
forgets to call finish_rebase(). Fix this. Also add a test to guard
against regressions.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the following case
$ git rebase master
Fast-forwarded autostash-fix to master.
The autostash is not applied automatically, because this codepath
forgets to call finish_rebase(). Fix this. Also add a test to guard
against regressions.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new feature allows a rebase to be executed on a dirty worktree or
index. It works by creating a temporary "dangling merge commit" out
of the worktree and index changes (via 'git stash create'), and
automatically applying it after a successful rebase or abort.
rebase stores the SHA-1 hex of the temporary merge commit, along with
the rest of the rebase state, in either
.git/{rebase-merge,rebase-apply}/autostash depending on the kind of
rebase. Since $state_dir is automatically removed at the end of a
successful rebase or abort, so is the autostash.
The advantage of this approach is that we do not affect the normal
stash's reflogs, making the autostash invisible to the end-user. This
means that you can use 'git stash' during a rebase as usual.
When the autostash application results in a conflict, we push
$state_dir/autostash onto the normal stash and remove $state_dir
ending the rebase. The user can inspect the stash, and pop or drop at
any time.
Most significantly, this feature means that a caller like pull (with
pull.rebase set to true) can easily be patched to remove the
require_clean_work_tree restriction.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
Ben Wijen
Phillip Wood
SZEDER Gábor
Junio C Hamano
Johannes Schindelin
Ville Skyttä
Patrick Steinhardt
John Keeping
Matthieu Moy
Ramkumar Ramachandra