summaryrefslogtreecommitdiff
path: root/t/t3407-rebase-abort.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-02-16rebase: rename the two primary rebase backendsLibravatar Elijah Newren1-3/+3
Two related changes, with separate rationale for each: Rename the 'interactive' backend to 'merge' because: * 'interactive' as a name caused confusion; this backend has been used for many kinds of non-interactive rebases, and will probably be used in the future for more non-interactive rebases than interactive ones given that we are making it the default. * 'interactive' is not the underlying strategy; merging is. * the directory where state is stored is not called .git/rebase-interactive but .git/rebase-merge. Rename the 'am' backend to 'apply' because: * Few users are familiar with git-am as a reference point. * Related to the above, the name 'am' makes sentences in the documentation harder for users to read and comprehend (they may read it as the verb from "I am"); avoiding this difficult places a large burden on anyone writing documentation about this backend to be very careful with quoting and sentence structure and often forces annoying redundancy to try to avoid such problems. * Users stumble over pronunciation ("am" as in "I am a person not a backend" or "am" as in "the first and thirteenth letters in the alphabet in order are "A-M"); this may drive confusion when one user tries to explain to another what they are doing. * While "am" is the tool driving this backend, the tool driving git-am is git-apply, and since we are driving towards lower-level tools for the naming of the merge backend we may as well do so here too. * The directory where state is stored has never been called .git/rebase-am, it was always called .git/rebase-apply. For all the reasons listed above: * Modify the documentation to refer to the backends with the new names * Provide a brief note in the documentation connecting the new names to the old names in case users run across the old names anywhere (e.g. in old release notes or older versions of the documentation) * Change the (new) --am command line flag to --apply * Rename some enums, variables, and functions to reinforce the new backend names for us as well. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-16rebase tests: mark tests specific to the am-backend with --amLibravatar Elijah Newren1-3/+3
We have many rebase tests in the testsuite, and often the same test is repeated multiple times just testing different backends. For those tests that were specifically trying to test the am backend, add the --am flag. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-11rebase: add --quit to cleanup rebase, leave everything else untouchedLibravatar Nguyễn Thái Ngọc Duy1-0/+24
There are occasions when you decide to abort an in-progress rebase and move on to do something else but you forget to do "git rebase --abort" first. Or the rebase has been in progress for so long you forgot about it. By the time you realize that (e.g. by starting another rebase) it's already too late to retrace your steps. The solution is normally rm -r .git/<some rebase dir> and continue with your life. But there could be two different directories for <some rebase dir> (and it obviously requires some knowledge of how rebase works), and the ".git" part could be much longer if you are not at top-dir, or in a linked worktree. And "rm -r" is very dangerous to do in .git, a mistake in there could destroy object database or other important data. Provide "git rebase --quit" for this use case, mimicking a precedent that is "git cherry-pick --quit". Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-10rebase: stricter check of standalone sub commandLibravatar Martin von Zweigbergk1-0/+10
The sub commands '--continue', '--skip' or '--abort' may only be used standalone according to the documentation. Other options following the sub command are currently not accepted, but options preceeding them are. For example, 'git rebase --continue -v' is not accepted, while 'git rebase -v --continue' is. Tighten up the check and allow no other options when one of these sub commands are used. Only check that it is standalone for non-interactive rebase for now. Once the command line processing for interactive rebase has been replaced by the command line processing in git-rebase.sh, this check will also apply to interactive rebase. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-23rebase --abort: do not update branch refLibravatar Martin von Zweigbergk1-0/+12
If a non-interactive rebase of a ref fails at commit X and is aborted by the user, the ref will be updated twice. First to point at X (with the reflog message "rebase finished: $head_name onto $onto"), and then back to $orig_head. It should not be updated at all. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-11test-lib: user-friendly alternatives to test [-d|-f|-e]Libravatar Matthieu Moy1-3/+3
The helper functions are implemented, documented, and used in a few places to validate them, but not everywhere to avoid useless code churn. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03tests: use "git xyzzy" form (t0000 - t3599)Libravatar Nanako Shiraishi1-1/+1
Converts tests between t0050-t3903. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Rename .git/rebase to .git/rebase-applyLibravatar Johannes Schindelin1-1/+1
With git-am, it sounds awkward to have the patches in ".git/rebase/", but for technical reasons, we have to keep the same directory name for git-am and git-rebase. ".git/rebase-apply" seems to be a good compromise. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-15Rename ".dotest/" to ".git/rebase" and ".dotest-merge" to "rebase-merge"Libravatar Johannes Schindelin1-2/+2
Since the files generated and used during a rebase are never to be tracked, they should live in $GIT_DIR. While at it, avoid the rather meaningless term "dotest" to "rebase", and unhide ".dotest-merge". This was wished for on the mailing list, but so far unimplemented. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05git-rebase.sh: Fix --merge --abort failures when path contains whitespaceLibravatar Bryan Donlan1-12/+21
Also update t/t3407-rebase-abort.sh to expose the bug. Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-03t3407-rebase-abort.sh: Enhance existing tests, and add test for rebase --mergeLibravatar Mike Hommey1-28/+40
Removing .dotest should actually not be needed, so just test the directory don't exist after --abort, but exists after starting the rebase. Also, execute the same tests with rebase --merge, which uses a different code path. Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-01git rebase --abort: always restore the right commitLibravatar Mike Hommey1-1/+1
Previously, --abort would end by git resetting to ORIG_HEAD, but some commands, such as git reset --hard (which happened in git rebase --skip, but could just as well be typed by the user), would have already modified ORIG_HEAD. Just use the orig-head we store in $dotest instead. Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-01Add test for git rebase --abortLibravatar Mike Hommey1-0/+59
We expect git rebase --abort to come back to the original (pre-rebase) head, independently from when it's run during a rebase. Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>