| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a lot of code to honor GIT_REFLOG_ACTION throughout git,
including some in sequencer.c; unfortunately, reflog_message() and its
callers ignored it. Instruct reflog_message() to check the existing
environment variable, and use it when present as an override to
action_name().
Also restructure pick_commits() to only temporarily modify
GIT_REFLOG_ACTION for a short duration and then restore the old value,
so that when we do this setting within a loop we do not keep adding "
(pick)" substrings and end up with a reflog message of the form
rebase (pick) (pick) (pick) (finish): returning to refs/heads/master
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have many rebase tests in the testsuite, and often the same test is
repeated multiple times just testing different backends. For those
tests that were specifically trying to test the am backend, add the --am
flag.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the merge backend was re-implemented on top of the interactive
backend, the output of rebase --merge changed a little. This change
allowed this test to be simplified, though it wasn't noticed until now.
Simplify the testcase a little.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of an ongoing effort to make rebase have more uniform behavior,
modify the merge backend to behave like the interactive one, by
re-implementing it on top of the latter.
Interactive rebases are implemented in terms of cherry-pick rather than
the merge-recursive builtin, but cherry-pick also calls into the
recursive merge machinery by default and can accept special merge
strategies and/or special strategy options. As such, there really is
not any need for having both git-rebase--merge and
git-rebase--interactive anymore. Delete git-rebase--merge.sh and
instead implement it in builtin/rebase.c.
This results in a few deliberate but small user-visible changes:
* The progress output is modified (see t3406 and t3420 for examples)
* A few known test failures are now fixed (see t3421)
* bash-prompt during a rebase --merge is now REBASE-i instead of
REBASE-m. Reason: The prompt is a reflection of the backend in use;
this allows users to report an issue to the git mailing list with
the appropriate backend information, and allows advanced users to
know where to search for relevant control files. (see t9903)
testcase modification notes:
t3406: --interactive and --merge had slightly different progress output
while running; adjust a test to match the new expectation
t3420: these test precise output while running, but rebase--am,
rebase--merge, and rebase--interactive all were built on very
different commands (am, merge-recursive, cherry-pick), so the
tests expected different output for each type. Now we expect
--merge and --interactive to have the same output.
t3421: --interactive fixes some bugs in --merge! Wahoo!
t9903: --merge uses the interactive backend so the prompt expected is
now REBASE-i.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --stat" to transplant a piece of history onto a totally
unrelated history were not working before and silently showed wrong
result. With the recent reimplementation in C, it started to instead
die with an error message, as the original logic was not prepared
to cope with this case. This has now been fixed.
* js/rebase-stat-unrelated-fix:
rebase --stat: fix when rebasing to an unrelated history
|
|
When rebasing to a commit history that has no common commits with the
current branch, there is no merge base. In diffstat mode, this means
that we cannot compare to the merge base, but we have to compare to the
empty tree instead.
Also, if running in verbose diffstat mode, we should not output
Changes from <merge-base> to <onto>
as that does not make sense without any merge base.
Note: neither scripted nor built-in versoin of `git rebase` were
prepared for this situation well. We use this opportunity not only to
fix the bug(s), but also to make both versions' output consistent in
this instance. And add a regression test to keep this working in all
eternity.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The scripted version of "rebase" honored the `GIT_REFLOG_ACTION`,
and some automation scripts expected the reflog entries to be
prefixed with "rebase -i", not "rebase", after running "rebase -i".
This regressed in the reimplementation in C.
Fix that, and add a regression test, both with `GIT_REFLOG_ACTION`
set and unset.
Note: the reflog message for "rebase finished" did *not* honor
GIT_REFLOG_ACTION, and as we are very late in the v2.20.0-rcN phase,
we leave that bug for later (as it seems that that bug has been with
us from the very beginning).
Reported by Ian Jackson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our testing framework uses a special i18n "poisoned localization"
feature to find messages that ought to stay constant but are
incorrectly marked to be translated. This feature has been made
into a runtime option (it used to be a compile-time option).
* ab/dynamic-gettext-poison:
Makefile: ease dynamic-gettext-poison transition
i18n: make GETTEXT_POISON a runtime option
|
|
It is a good idea to error out early upon seeing, say, `-Cbad`, rather
than starting the rebase only to have the `--am` backend complain later.
Let's do this.
The only options accepting parameters which we pass through to `git am`
(which may, or may not, forward them to `git apply`) are `-C` and
`--whitespace`. The other options we pass through do not accept
parameters, so we do not have to validate them here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the GETTEXT_POISON compile-time + runtime GIT_GETTEXT_POISON
test parameter to only be a GIT_TEST_GETTEXT_POISON=<non-empty?>
runtime parameter, to be consistent with other parameters documented
in "Running tests with special setups" in t/README.
When I added GETTEXT_POISON in bb946bba76 ("i18n: add GETTEXT_POISON
to simulate unfriendly translator", 2011-02-22) I was concerned with
ensuring that the _() function would get constant folded if NO_GETTEXT
was defined, and likewise that GETTEXT_POISON would be compiled out
unless it was defined.
But as the benchmark in my [1] shows doing a one-off runtime
getenv("GIT_TEST_[...]") is trivial, and since GETTEXT_POISON was
originally added the GIT_TEST_* env variables have become the common
idiom for turning on special test setups.
So change GETTEXT_POISON to work the same way. Now the
GETTEXT_POISON=YesPlease compile-time option is gone, and running the
tests with GIT_TEST_GETTEXT_POISON=[YesPlease|] can be toggled on/off
without recompiling.
This allows for conditionally amending tests to test with/without
poison, similar to what 859fdc0c3c ("commit-graph: define
GIT_TEST_COMMIT_GRAPH", 2018-08-29) did for GIT_TEST_COMMIT_GRAPH. Do
some of that, now we e.g. always run the t0205-gettext-poison.sh test.
I did enough there to remove the GETTEXT_POISON prerequisite, but its
inverse C_LOCALE_OUTPUT is still around, and surely some tests using
it can be converted to e.g. always set GIT_TEST_GETTEXT_POISON=.
Notes on the implementation:
* We still compile a dedicated GETTEXT_POISON build in Travis
CI. Perhaps this should be revisited and integrated into the
"linux-gcc" build, see ae59a4e44f ("travis: run tests with
GIT_TEST_SPLIT_INDEX", 2018-01-07) for prior art in that area. Then
again maybe not, see [2].
* We now skip a test in t0000-basic.sh under
GIT_TEST_GETTEXT_POISON=YesPlease that wasn't skipped before. This
test relies on C locale output, but due to an edge case in how the
previous implementation of GETTEXT_POISON worked (reading it from
GIT-BUILD-OPTIONS) wasn't enabling poison correctly. Now it does,
and needs to be skipped.
* The getenv() function is not reentrant, so out of paranoia about
code of the form:
printf(_("%s"), getenv("some-env"));
call use_gettext_poison() in our early setup in git_setup_gettext()
so we populate the "poison_requested" variable in a codepath that's
won't suffer from that race condition.
* We error out in the Makefile if you're still saying
GETTEXT_POISON=YesPlease to prompt users to change their
invocation.
* We should not print out poisoned messages during the test
initialization itself to keep it more readable, so the test library
hides the variable if set in $GIT_TEST_GETTEXT_POISON_ORIG during
setup. See [3].
See also [4] for more on the motivation behind this patch, and the
history of the GETTEXT_POISON facility.
1. https://public-inbox.org/git/871s8gd32p.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/20181102163725.GY30222@szeder.dev/
3. https://public-inbox.org/git/20181022202241.18629-2-szeder.dev@gmail.com/
4. https://public-inbox.org/git/878t2pd6yu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t3406 is supposed to test "messages from rebase operation", so let's
move tests in t3400 that fit that description into 3406. Most of the
functionality they tested, except for the messages, has now been
subsumed by t3420.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the following:
- Quote 'setup'
- Remove blank lines within test case body
- Use test_commit instead of custom quick_one
- Create branch "topic" from tag created by test_commit
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 9765b6a (rebase: align variable content, 2011-02-06), the code
to error out was moved up one level. Unfortunately, one reference
to a function parameter wasn't rewritten as it should, leading to
the wrong parameter being errored on.
This error was propagated by 71786f5 (rebase: factor out reference
parsing, 2011-02-06) and merged in 78c6e0f (Merge branch
'mz/rebase', 2011-04-28).
Correct this by reporting $onto_name istead.
Reported-By: Manuela Hutter <manuelah@opera.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The behavior of --verbose is unchanged, but uses a different state
variable internally, so that the meaning of verbose output may be
expanded without affecting the diffstat. This is also reflected in
the documentation.
The configuration option rebase.stat works the same was as merg.stat,
but the default is currently false.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many scripts compare actual and expected output using
"diff -u". This is nicer than "cmp" because the output shows
how the two differ. However, not all versions of diff
understand -u, leading to unnecessary test failure.
This adds a test_cmp function to the test scripts and
switches all "diff -u" invocations to use it. The function
uses the contents of "$GIT_TEST_CMP" to compare its
arguments; the default is "diff -u".
On systems with a less-capable diff, you can do:
GIT_TEST_CMP=cmp make test
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a topic branch is rebased, some of whose commits are already
cherry-picked upstream:
o--X--A--B--Y <- master
\
A--B--Z <- topic
then 'git rebase -m master' would report:
Already applied: 0001 Y
Already applied: 0002 Y
With this fix it reports the expected:
Already applied: 0001 A
Already applied: 0002 B
As an added bonus, this change also avoids 'echo' of a commit message,
which might contain escapements.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Elijah Newren
Junio C Hamano
Ævar Arnfjörð Bjarmason
Martin von Zweigbergk
Jiang Xin
Erik Faye-Lund
Jonathan Nieder
Tor Arne Vestbø
Jeff King
Johannes Sixt