| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add i18n support for scripted Porcelains, and mark strings in
merge(-recursive), am, and rebase for i18n.
* jx/i18n-1.7.11:
i18n: merge-recursive: mark strings for translation
Remove dead code which contains bad gettext block
i18n: am: mark more strings for translation
rebase: remove obsolete and unused LONG_USAGE which breaks xgettext
i18n: Rewrite gettext messages start with dash
i18n: rebase: mark messages for translation
i18n: New keywords for xgettext extraction from sh
|
|
Gettext message in a shell script should not start with '-', one
workaround is adding '--' between gettext and the message, like:
gettext -- "--exec option ..."
But due to a bug in the xgettext extraction, xgettext can not
extract the actual message for this case. Rewriting the message
is a simpler and better solution.
Reported-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finishing touches to the "rebase -i --root" (new feature for
1.7.12).
* cw/rebase-i-root:
rebase -i: handle fixup of root commit correctly
|
|
There is a bug with git rebase -i --root when a fixup or squash line is
applied to the new root. We attempt to amend the commit onto which they
apply with git reset --soft HEAD^ followed by a normal commit. Unlike a
real commit --amend, this sequence will fail against a root commit as it
has no parent.
Fix rebase -i to use commit --amend for fixup and squash instead, and
add a test for the case of a fixup of the root commit.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase [-i] --root $tip" can now be used to rewrite all the
history down to the root.
* cw/rebase-i-root:
t3404: make test 57 work with dash and others
Add tests for rebase -i --root without --onto
rebase -i: support --root without --onto
|
|
The construct
VAR=value test_must_fail command args
works only for some shells (such as bash) but not others (such as dash)
because VAR=value does not end up in the environment for command when it
is called by the shell function test_must_fail. That is why we explicitly
set and export variable in a subshell, i.e.
(
VAR=value &&
export VAR &&
test_must_fail command args
)
in most places already, bar the newly introduced 57 from b64b7fe
(Add tests for rebase -i --root without --onto, 2012-06-26).
Make test 57 use that construct also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test for likely breakages in t3404, including successful reordering of
non-conflicting changes with a new root, correct preservation of commit
message and author in a root commit when it is squashed with the
sentinel, and presence of the sentinel following a conflicting
cherry-pick of a new root.
Remove test_must_fail for git rebase --root without --onto from t3412 as
this case will now be successfully handled by an implicit git rebase -i.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During an interactive rebase session, it is sometimes desirable to
run tests on each commit in the resulting history. This can be done
by adding "exec <test command>" when editing the insn sheet, but the
command used for testing is often the same for all resulting commits.
By passing "--exec <cmd>" from the command line, automatically add
these "exec" lines after each commit in the final history. To work
well with the --autosquash option, these are added at the end of
each run of "fixup" and "squash".
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By Jens Lehmann (1) and Johannes Sixt (1)
* maint:
Consistently use "superproject" instead of "supermodule"
t3404: begin "exchange commits with -p" test with correct preconditions
|
|
The test case shows a bug in 'rebase -p', but even if the bug were fixed
the test would fail because it did not ensure that the preconditions match
the postconditions that were checked. Insert the suitable 'git checkout'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git-rebase--interactive stops due to a conflict and the only change
to be committed is in a submodule, the test for whether there is
anything to be committed ignores the staged submodule change. This
leads rebase to skip creating the commit for the change.
While unstaged submodule changes should be ignored to avoid needing to
update submodules during a rebase, it is safe to remove the
--ignore-submodules option to diff-index because --cached ensures that
it is only checking the index. This was discussed in [1] and a test is
included to ensure that unstaged changes are still ignored correctly.
[1] http://thread.gmane.org/gmane.comp.version-control.git/188713
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After an "exec false" stops the rebase and gives the control back to
the user, if changes are added to the index, "rebase --continue" fails
with this message, which may technically be correct, but does not point
at the real problem:
.../git-rebase--interactive: line 774: .../.git/rebase-merge/author-script: No such file or directory
We could try auto-amending HEAD, but this goes against the logic of
.git/rebase-merge/author-script (see also the testcase 'auto-amend only
edited commits after "edit"' in t3404-rebase-interactive.sh) to
auto-amend something the user hasn't explicitely asked to edit.
Instead of doing anything automatically, detect the situation and give a
clean error message. While we're there, also clarify the error message in
case '. "$author_script"' fails, which now corresponds to really weird
senario where the author script exists but can't be read.
Test-case-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consider this graph:
D---E (topic, HEAD)
/ /
A---B---C (master)
\
F (topic2)
and the following three commands:
1. git rebase -i -p A
2. git rebase -i -p --onto F A
3. git rebase -i -p B
Currently, (1) and (2) will pick B, D, C, and E onto A and F,
respectively. However, (3) will only pick D and E onto B, but not C,
which is inconsistent with (1) and (2). As a result, we cannot modify C
during the interactive-rebase.
The current behavior also creates a bug if we do:
4. git rebase -i -p C
In (4), E is never picked. And since interactive-rebase resets "HEAD"
to "onto" before picking any commits, D and E are lost after the
interactive-rebase.
This patch fixes the inconsistency and bug by ensuring that all children
of upstream are always picked. This essentially reverts the commit:
d80d6bc146232d81f1bb4bc58e5d89263fd228d4
When compiling the todo list, commits reachable from "upstream" should
never be skipped under any conditions. Otherwise, we lose the ability
to modify them like (3), and create a bug like (4).
Two of the tests contain a scenario like (3). Since the new behavior
added more commits for picking, these tests need to be updated to
account for the additional pick lines. A new test has also been added
for (4).
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we finish a rebase, our detached HEAD is at the final
result. We update the original branch ref with this result,
and then point the HEAD symbolic ref at the updated branch.
We write a reflog for the branch update, but not for the
update of HEAD.
Because we're already at the final result on the detached
HEAD, moving to the branch actually doesn't change our
commit sha1 at all. So in that sense, a reflog entry would
be pointless.
However, humans do read reflogs, and an entry saying "rebase
finished: returning to refs/heads/master" can be helpful in
understanding what is going on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Prepare for 1.7.3.5
Fix false positives in t3404 due to SHELL=/bin/false
close file on error in read_mmfile()
Conflicts:
RelNotes
|
|
If the user's shell in NSS passwd is /bin/false (eg as found during Gentoo's
package building), the git-rebase exec tests will fail, because they call
$SHELL around the command, and in the existing testcase, $SHELL was not being
cleared sufficently.
This lead to false positive failures of t3404 on systems where the package
build user was locked down as noted above.
Signed-off-by: "Robin H. Johnson" <robbat2@gentoo.org>
X-Gentoo-Bug: 349083
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=349083
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
|
|
When using combine_notes_concatenate() to concatenate notes, it currently
ensures exactly one newline character between the given notes. However,
when using builtin/notes.c:create_note() to concatenate notes (e.g. by
'git notes append'), it adds a newline character to the trailing newline
of the preceding notes object, thus resulting in _two_ newlines (aka. a
blank line) separating contents of the two notes.
This patch brings combine_notes_concatenate() into consistency with
builtin/notes.c:create_note(), by ensuring exactly _two_ newline characters
between concatenated notes.
The patch also changes a few notes-related selftests accordingly.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The same code to check the position of HEAD is used by several
tests in this script. Factor it out as a function and simplify it.
Noticed using an &&-chaining tester, because the current code
does not propagate the precise exit status from errors.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a comment describing the setup in t3404 to its --help output.
This should make it easier to decide where to put new functions
without disrupting the flow of the file or obstructing the description
of the test setup.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow test_commit failures in loop iterations before the last one to
cause the test assertion to fail.
More importantly, avoiding these loops makes the test a little
simpler to read and decreases the vertical screen footprint of
the setup test assertion by one line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Same rules as before: this patch only adds " &&" to the end of
some lines in the test suite.
Intended to be applied on top of or squashed with the last
batch if they look okay.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/rebase-i-exec:
git-rebase--interactive.sh: use printf instead of echo to print commit message
git-rebase--interactive.sh: rework skip_unnecessary_picks
test-lib: user-friendly alternatives to test [-d|-f|-e]
rebase -i: add exec command to launch a shell command
Conflicts:
git-rebase--interactive.sh
t/t3404-rebase-interactive.sh
|
|
* dg/local-mod-error-messages:
t7609: test merge and checkout error messages
unpack_trees: group error messages by type
merge-recursive: distinguish "removed" and "overwritten" messages
merge-recursive: porcelain messages for checkout
Turn unpack_trees_options.msgs into an array + enum
Conflicts:
t/t3400-rebase.sh
|
|
When an error is encountered, it calls add_rejected_file() which either
- directly displays the error message and stops if in plumbing mode
(i.e. if show_all_errors is not initialized at 1)
- or stores it so that it will be displayed at the end with display_error_msgs(),
Storing the files by error type permits to have a list of files for
which there is the same error instead of having a serie of almost
identical errors.
As each bind_overlap error combines a file and an old file, a list cannot be
done, therefore, theses errors are not stored but directly displayed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The helper functions are implemented, documented, and used in a few
places to validate them, but not everywhere to avoid useless code churn.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The typical usage pattern would be to run a test (or simply a compilation
command) at given points in history.
The shell command is ran (from the worktree root), and the rebase is
stopped when the command fails, to give the user an opportunity to fix
the problem before continuing with "git rebase --continue".
This needs a little rework of skip_unnecessary_picks, which wasn't robust
enough to deal with lines like
exec >"file name with many spaces"
in the todolist. The new version extracts command, sha1 and rest from
each line, but outputs the line itself verbatim to avoid changing the
whitespace layout.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On systems with an echo which defaults to the XSI-conformant behavior
(Solaris, or others using Ksh), echo will interpret certain backslashed
characters as control sequences. This can cause a problem for interactive
rebase when it is used to rebase commits whose commit "subject" (the first
line) contains any of these backslashed sequences. In this case, echo will
substitute the control sequence for the backslashed characters and either
the rebased commit message will differ from the original, or the rebase
process will fail. Neither is desirable.
So work around this issue by replacing the echo statements used to print
out portions of the commit message, with printf.
Also, add a test to test for this breakage.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ic/maint-rebase-i-abort:
rebase -i: Abort cleanly if new base cannot be checked out
|
|
Untracked content in the working tree may prevent rebase -i from checking out
the new base onto which it wants to replay commits, if the new base commit
includes files at those (now untracked) paths. Currently, rebase -i dies
uncleanly in this situation, updating ORIG_HEAD and leaving a useless
.git/rebase-merge directory, with which the user can do nothing useful except
rebase --abort. Make rebase -i abort the procedure itself instead, as
non-interactive rebase already does, and add a test for this behavior.
Signed-off-by: Ian Ward Comfort <icomfort@stanford.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rebase --preserve-merges facility presents a list of commits
in its instruction sheet and uses a separate table to keep
track of their parents. Unfortunately, in practice this means
that with -p after most attempts to rearrange patches, some
commits have the "wrong" parent and the resulting history is
rarely what the caller expected.
Yes, it would be nice to fix that. But first, add a warning to the
manual to help the uninitiated understand what is going on.
Reported-by: Jiří Paleček <jpalecek@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mb/rebase-i-no-ff:
Teach rebase the --no-ff option.
Conflicts:
git-rebase--interactive.sh
t/t3404-rebase-interactive.sh
|
|
* do/rebase-i-arbitrary:
rebase--interactive: don't require what's rebased to be a branch
Conflicts:
t/t3404-rebase-interactive.sh
|
|
For git-rebase.sh, --no-ff is a synonym for --force-rebase.
For git-rebase--interactive.sh, --no-ff cherry-picks all the commits in
the rebased branch, instead of fast-forwarding over any unchanged commits.
--no-ff offers an alternative way to deal with reverted merges. Instead of
"reverting the revert" you can use "rebase --no-ff" to recreate the branch
with entirely new commits (they're new because at the very least the
committer time is different). This obviates the need to revert the
reversion, as you can re-merge the new topic branch directly. Added an
addendum to revert-a-faulty-merge.txt describing the situation and how to
use --no-ff to handle it.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git rebase allows you to specify a non-branch commit-ish as the "branch"
argument, which leaves HEAD detached when it's finished. This is
occasionally useful, and this patch brings the same functionality to git
rebase --interactive.
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Luckily, all the support already happens to be there.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a squash/fixup fails due to a conflict, the user is required to
edit the commit message. Previously, if further squash/fixup commands
followed the conflicting squash/fixup, this user-edited message was
discarded and a new automatically-generated commit message was
suggested.
Change the handling of conflicts within squash/fixup command series:
Whenever the user is required to intervene, consider the resulting
commit to be a new basis for the following squash/fixups and use its
commit message in later suggested combined commit messages.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
...and reuse these pre-created branches in tests rather than creating
duplicates.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the "rebase -i" commands include a series of fixup commands without
any squash commands, then commit the combined commit using the commit
message of the corresponding "pick" without starting up the
commit-message editor.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the numeral "2" instead of the word "two" when two commits are
being interactively squashed. This makes the treatment consistent
with that for higher numbers of commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first line of commit messages generated for "rebase -i"
squash/fixup commits includes a count of the number of commits that
are being combined. Add machinery to check that this count is
correct, and add such a check to some test cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command is like "squash", except that it discards the commit message
of the corresponding commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also adjust "expected" text to reflect the file contents generated by
test_commit, which are slightly different than those generated by the
old code.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it easier to edit just the commit message for a commit
using 'git rebase -i' by introducing the "reword" command.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The $TEST_DIRECTORY variable allows tests to find the
top-level test directory regardless of the current working
directory.
In the past, this has been used to accomodate tests which
change directories, but it is also the first step to being
able to move trash directories outside of the
$TEST_DIRECTORY hierarchy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jiang Xin
Chris Webb
Michael J Gruber
Lucien Kong
Johannes Sixt
Zbigniew Jędrzejewski-Szmek
John Keeping
Matthieu Moy
Andrew Wong
Jeff King
Robin H. Johnson
Johan Herland
Jonathan Nieder
Jens Lehmann
Brandon Casey
Ian Ward Comfort
Marc Branchaud
Dave Olszewski
Thomas Rast
Michael Haggerty
Björn Gustavsson