summaryrefslogtreecommitdiff
path: root/t/t3404-rebase-interactive.sh
AgeCommit message (Collapse)AuthorFilesLines
2016-09-07rebase -i: improve advice on bad instruction linesLibravatar Ralf Thielow1-3/+3
If we found bad instruction lines in the instruction sheet of interactive rebase, we give the user advice on how to fix it. However, we don't tell the user what to do afterwards. Give the user advice to run 'git rebase --continue' after the fix. Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-12t3404: become resilient to GETTEXT_POISONLibravatar Vasco Almeida1-1/+1
The concerned test greps the output of exit_with_patch() in git-rebase--interactive.sh script. Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-28Merge branch 'js/rebase-i-tests'Libravatar Junio C Hamano1-0/+8
A few tests that specifically target "git rebase -i" have been added. * js/rebase-i-tests: rebase -i: we allow extra spaces after fixup!/squash! rebase -i: demonstrate a bug with --autosquash t3404: add a test for the --gpg-sign option
2016-07-13Merge branch 'js/t3404-grammo-fix'Libravatar Junio C Hamano1-1/+1
Grammofix. * js/t3404-grammo-fix: t3404: fix a grammo (commands are ran -> commands are run)
2016-07-07t3404: add a test for the --gpg-sign optionLibravatar Johannes Schindelin1-0/+8
For the upcoming rebase--helper work (which will accelerate the interactive rebase noticably), it is important to verify that the --gpg-sign option is handled properly. Please note that this patch does this on the cheap, by verifying that the expected option is printed in the message of the 'edit' operation. We really should test that the interactive rebase signs the commits properly, iff GPG is available. This test is left for later. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-29t3404: fix a grammo (commands are ran -> commands are run)Libravatar Johannes Schindelin1-1/+1
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17tests: unpack-trees: update to use test_i18n* functionsLibravatar Vasco Almeida1-2/+2
Use functions test_i18ncmp and test_i18ngrep to successfully pass tests running under GETTEXT_POISON. The output strings compared to in these test were marked for translation in ed47fdf ("i18n: unpack-trees: mark strings for translation", 2016-04-09) and later improved in 2e3926b ("i18n: unpack-trees: avoid substituting only a verb in sentences", 2016-05-12). Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17i18n: rebase-interactive: mark here-doc strings for translationLibravatar Vasco Almeida1-7/+7
Use pipe to send gettext output to git stripspace instead of the original method of using shell here-document, because command substitution '$(...)' would not take place inside the here-documents. The exception is the case of the last here-document redirecting to cat, in which commands substitution works and, thus, is preserved in this commit. t3404: adapt test to the strings newly marked for translation Test t3404-rebase-interactive.sh would fail under GETTEXT_POISON unless using test_i18ngrep. Add eval_ngettext fallback functions to be called when running, for instance, under GETTEXT_POISON. Otherwise, tests would fail under GETTEXT_POISON, or other build that doesn't support the GNU gettext, because that function could not be found. Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-10t3404: fix typoLibravatar Johannes Schindelin1-1/+1
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22Merge branch 'jk/use-write-script-more'Libravatar Junio C Hamano1-4/+3
Code clean-up. * jk/use-write-script-more: t3404: use write_script t1020: do not overuse printf and use write_script t5532: use write_script
2016-04-12t3404: use write_scriptLibravatar Junio C Hamano1-4/+3
The test uses hardcoded #!/bin/sh to create a pre-commit hook script. Because the generated script uses $(command substitution), which is not supported by /bin/sh on some platforms (e.g. Solaris), the resulting pre-commit always fails. Which is not noticeable as the test that uses the hook is about checking the behaviour of the command when the hook fails ;-), but nevertheless it is not testing what we wanted to test. Use write_script so that the resulting script is run under the same shell our scripted Porcelain commands are run, which must support the necessary $(construct). Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-18t3404: cleanup double empty lines between testsLibravatar Stefan Beller1-6/+0
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-18rebase: decouple --exec from --interactiveLibravatar Stefan Beller1-7/+6
In the later steps of preparing a patch series I do not want to edit or reorder the patches any more, but just make sure the test suite passes after each patch and also to fix breakage right there if some of the steps fail. I could run EDITOR=true git rebase -i <anchor> -x "make test" but it would be simpler if it can be spelled like so: git rebase <anchor> -x "make test" Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-11rebase -i: remember merge options beyond continue actionsLibravatar Fabian Ruch1-0/+16
If the user explicitly specified a merge strategy or strategy options, continue to use that strategy/option after "rebase --continue". Add a test of the corrected behavior. If --merge is specified or implied by -s or -X, then "strategy and "strategy_opts" are set to values from which "strategy_args" can be derived; otherwise they are set to empty strings. Either way, their values are propagated from one step of an interactive rebase to the next via state files. "do_merge", on the other hand, is *not* propagated to later steps of an interactive rebase. Therefore, making the initialization of "strategy_args" conditional on "do_merge" being set prevents later steps of an interactive rebase from setting it correctly. Luckily, we don't need the "do_merge" guard at all. If the rebase was started without --merge, then "strategy" and "strategy_opts" are both the empty string, which results in "strategy_args" also being set to the empty string, which is just what we want in that situation. So remove the "do_merge" guard and derive "strategy_args" from "strategy" and "strategy_opts" every time. Reported-by: Diogo de Campos <campos@esss.com.br> Signed-off-by: Fabian Ruch <bafain@gmail.com> Helped-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-11Merge branch 'cb/t3404-shellquote' into maintLibravatar Junio C Hamano1-1/+1
* cb/t3404-shellquote: t3404: fix quoting of redirect for some versions of bash
2015-12-04t3404: fix quoting of redirect for some versions of bashLibravatar Charles Bailey1-1/+1
As CodingGuidelines says, some versions of bash errors out when $variable substitution is used as the target for redirection without being quoted (even though POSIX may not require such a quote). Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-03Merge branch 'gr/rebase-i-drop-warn' into maintLibravatar Junio C Hamano1-0/+12
Recent update to "rebase -i" that tries to sanity check the edited insn sheet before it uses it has become too picky on Windows where CRLF left by the editor is turned into a trailing CR on the line read via the "read" built-in command. * gr/rebase-i-drop-warn: rebase-i: work around Windows CRLF line endings t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endings
2015-10-28rebase-i: work around Windows CRLF line endingsLibravatar Junio C Hamano1-1/+1
Editors on Windows can and do save text files with CRLF line endings, which is the convention on the platform. We are seeing reports that the "read" command in a port of bash to the environment however does not strip the CRLF at the end, not adjusting for the same convention on the platform. This breaks the recently added sanity checks for the insn sheet fed to "rebase -i"; instead of an empty line (hence nothing in $command), the script was getting a lone CR in there. Special case a lone CR and treat it the same way as an empty line to work this around. This patch (also) passes the test with Git for Windows, where the issue was seen first. Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-28t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endingsLibravatar Johannes Schindelin1-0/+12
Based on a bug report by Chad Boles. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-16Merge branch 'gr/rebase-i-drop-warn' into maintLibravatar Junio C Hamano1-0/+15
"git rebase -i" had a minor regression recently, which stopped considering a line that begins with an indented '#' in its insn sheet not a comment, which is now fixed. * gr/rebase-i-drop-warn: rebase-i: loosen over-eager check_bad_cmd check rebase-i: explicitly accept tab as separator in commands
2015-10-05rebase-i: loosen over-eager check_bad_cmd checkLibravatar Matthieu Moy1-0/+15
804098bb (git rebase -i: add static check for commands and SHA-1, 2015-06-29) tried to check all insns before running any in the todo list, but it did so by implementing its own parser that is a lot stricter than necessary. We used to allow lines that are indented (including comment lines), and we used to allow a whitespace between the insn and the commit object name to be HT, among other things, that are flagged as an invalid line by mistake. Fix this by using the same tokenizer that is used to parse the todo list file in the new check. Whether it's a good thing to accept indented comments is debatable (other commands like "git commit" do not accept them), but we already accepted them in the past, and some people and scripts rely on this behavior. Also, a line starting with space followed by a '#' cannot have any meaning other than being a comment, hence it doesn't harm to accept them as comments. Largely based on patch by: Junio C Hamano <gitster@pobox.com> [jc: updated test with quickfix from Torsten Bögershausen] Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-12Merge branch 'dt/reflog-tests'Libravatar Junio C Hamano1-5/+5
Tests that assume how reflogs are represented on the filesystem too much have been corrected. * dt/reflog-tests: tests: remove some direct access to .git/logs t/t7509: remove unnecessary manipulation of reflog
2015-08-03Merge branch 'gr/rebase-i-drop-warn'Libravatar Junio C Hamano1-0/+123
Add "drop commit-object-name subject" command as another way to skip replaying of a commit in "rebase -i", and then punish those who do not use it (and instead just remove the lines) by throwing a warning. * gr/rebase-i-drop-warn: git rebase -i: add static check for commands and SHA-1 git rebase -i: warn about removed commits git-rebase -i: add command "drop" to remove a commit
2015-07-28tests: remove some direct access to .git/logsLibravatar David Turner1-5/+5
Alternate refs backends might store reflogs somewhere other than .git/logs. Change most test code that directly accesses .git/logs to instead use git reflog commands. There are still a few tests which need direct access to reflogs: to check reflog permissions, to manually create reflogs from scratch, to save/restore reflogs, to check the format of raw reflog data, and to remove not just reflog contents, but the reflogs themselves. All cases which don't need direct access have been modified. Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-13Merge branch 'js/rebase-i-clean-up-upon-continue-to-skip'Libravatar Junio C Hamano1-0/+21
Abandoning an already applied change in "git rebase -i" with "--continue" left CHERRY_PICK_HEAD and confused later steps. * js/rebase-i-clean-up-upon-continue-to-skip: rebase -i: do not leave a CHERRY_PICK_HEAD file behind t3404: demonstrate CHERRY_PICK_HEAD bug
2015-06-30git rebase -i: add static check for commands and SHA-1Libravatar Galan Rémi1-0/+39
Check before the start of the rebasing if the commands exists, and for the commands expecting a SHA-1, check if the SHA-1 is present and corresponds to a commit. In case of error, print the error, stop git rebase and prompt the user to fix with 'git rebase --edit-todo' or to abort. This allows to avoid doing half of a rebase before finding an error and giving back what's left of the todo list to the user and prompt him to fix when it might be too late for him to do so (he might have to abort and restart the rebase). Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-30git rebase -i: warn about removed commitsLibravatar Galan Rémi1-0/+66
Check if commits were removed (i.e. a line was deleted) and print warnings or stop git rebase depending on the value of the configuration variable rebase.missingCommitsCheck. This patch gives the user the possibility to avoid silent loss of information (losing a commit through deleting the line in this case) if he wants. Add the configuration variable rebase.missingCommitsCheck. - When unset or set to "ignore", no checking is done. - When set to "warn", the commits are checked, warnings are displayed but git rebase still proceeds. - When set to "error", the commits are checked, warnings are displayed and the rebase is stopped. (The user can then use 'git rebase --edit-todo' and 'git rebase --continue', or 'git rebase --abort') rebase.missingCommitsCheck defaults to "ignore". Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-30git-rebase -i: add command "drop" to remove a commitLibravatar Galan Rémi1-0/+18
Instead of removing a line to remove the commit, you can use the command "drop" (just like "pick" or "edit"). It has the same effect as deleting the line (removing the commit) except that you keep a visual trace of your actions, allowing a better control and reducing the possibility of removing a commit by mistake. Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-29rebase -i: do not leave a CHERRY_PICK_HEAD file behindLibravatar Johannes Schindelin1-1/+1
When skipping commits whose changes were already applied via `git rebase --continue`, we need to clean up said file explicitly. The same is not true for `git rebase --skip` because that will execute `git reset --hard` as part of the "skip" handling in git-rebase.sh, even before git-rebase--interactive.sh is called. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-29t3404: demonstrate CHERRY_PICK_HEAD bugLibravatar Johannes Schindelin1-0/+21
When rev-list's --cherry option does not detect that a patch has already been applied upstream, an interactive rebase would offer to reapply it and consequently stop at that patch with a failure, mentioning that the diff is empty. Traditionally, a `git rebase --continue` simply skips the commit in such a situation. However, as pointed out by Gábor Szeder, this leaves a CHERRY_PICK_HEAD behind, making the Git prompt believe that a cherry pick is still going on. This commit adds a test case demonstrating this bug. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-05Merge branch 'ph/rebase-i-redo' into maintLibravatar Junio C Hamano1-0/+47
"git rebase -i" moved the "current" command from "todo" to "done" a bit too prematurely, losing a step when a "pick" did not even start. * ph/rebase-i-redo: rebase -i: redo tasks that die during cherry-pick
2015-05-19Merge branch 'ph/rebase-i-redo'Libravatar Junio C Hamano1-0/+47
"git rebase -i" moved the "current" command from "todo" to "done" a bit too prematurely, losing a step when a "pick" did not even start. * ph/rebase-i-redo: rebase -i: redo tasks that die during cherry-pick
2015-04-29rebase -i: redo tasks that die during cherry-pickLibravatar Phil Hord1-0/+47
When rebase--interactive processes a task, it removes the item from the todo list and appends it to another list of executed tasks. If a pick (this includes squash and fixup) fails before the index has recorded the changes, take the corresponding item and put it on the todo list again. Otherwise, the changes introduced by the scheduled commit would be lost. That kind of decision is possible since the cherry-pick command signals why it failed to apply the changes of the given commit. Either the changes are recorded in the index using a conflict (return value 1) and rebase does not continue until they are resolved or the changes are not recorded in the index (return value neither 0 nor 1) and rebase has to try again with the same task. Add a test cases for regression testing to the "rebase-interactive" test suite. Signed-off-by: Fabian Ruch <bafain@gmail.com> Signed-off-by: Phil Hord <hordp@cisco.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-23Merge branch 'es/rebase-i-count-todo' into maintLibravatar Junio C Hamano1-0/+9
"git rebase -i" recently started to include the number of commits in the insn sheet to be processed, but on a platform that prepends leading whitespaces to "wc -l" output, the numbers are shown with extra whitespaces that aren't necessary. * es/rebase-i-count-todo: rebase-interactive: re-word "item count" comment rebase-interactive: suppress whitespace preceding item count
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix moderate &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, but in a way that probably does not effect the outcome of the test. Most of these are of the form: some_cmd >actual test_cmp expect actual The main point of the test is to verify the output, and a failure in some_cmd would probably be noticed by bogus output. But it is good for the tests to also confirm that "some_cmd" does not die unexpectedly after producing its output. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-17Merge branch 'es/rebase-i-count-todo'Libravatar Junio C Hamano1-0/+9
"git rebase -i" recently started to include the number of commits in the insn sheet to be processed, but on a platform that prepends leading whitespaces to "wc -l" output, the numbers are shown with extra whitespaces that aren't necessary. * es/rebase-i-count-todo: rebase-interactive: re-word "item count" comment rebase-interactive: suppress whitespace preceding item count
2015-03-06rebase-interactive: suppress whitespace preceding item countLibravatar Eric Sunshine1-0/+9
97f05f43 (Show number of TODO items for interactive rebase, 2014-12-10) taught rebase-interactive to compute an item count with 'wc -l' and display it in the instruction list comments: # Rebase 46640c6..5568fd5 onto 46640c6 (4 TODO item(s)) On Mac OS X, however, it renders as: # Rebase 46640c6..5568fd5 onto 46640c6 ( 4 TODO item(s)) since 'wc -l' indents its output with leading spaces. Fix this. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-22rebase -i: use full object name internally throughout the scriptLibravatar Kirill A. Shutemov1-0/+7
In earlier days, the abbreviated commit object name shown to the end users were generated with hardcoded --abbrev=7; 56895038 (rebase -i: respect core.abbrev, 2013-09-28) tried to make it honor the user specified core.abbrev, but it missed the very initial invocation of the editor. These days, we try to use the full 40-hex object names internally to avoid ambiguity that can arise after rebase starts running. Newly created objects during the rebase may share the same prefix with existing commits listed in the insn sheet. These object names are shortened just before invoking the sequence editor to present the insn sheet to the end user, and then expanded back to full object names when the editor returns. But the code still used the shortened names when preparing the insn sheet for the very first time, resulting "7 hexdigits or more" output to the user. Change the code to use full 40-hex commit object names from the very beginning to make things more uniform. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-06Merge branch 'mt/rebase-i-keep-empty-test'Libravatar Junio C Hamano1-0/+8
* mt/rebase-i-keep-empty-test: rebase --keep-empty -i: add test
2014-05-19rebase --keep-empty -i: add testLibravatar Michael S. Tsirkin1-0/+8
There's some special code in rebase -i to deal with --keep-empty. Add test for this combination. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-19tests: use "env" to run commands with temporary env-var settingsLibravatar David Tran1-56/+13
Ordinarily, we would say "VAR=VAL command" to execute a tested command with environment variable(s) set only for that command. This however does not work if 'command' is a shell function (most notably 'test_must_fail'); the result of the assignment is retained and affects later commands. To avoid this, we used to assign and export environment variables and run such a test in a subshell, like so: ( VAR=VAL && export VAR && test_must_fail git command to be tested ) But with "env" utility, we should be able to say: test_must_fail env VAR=VAL git command to be tested which is much shorter and easier to read. Signed-off-by: David Tran <unsignedzero@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-11Merge branch 'es/rebase-i-no-abbrev'Libravatar Junio C Hamano1-2/+87
The commit object names in the insn sheet that was prepared at the beginning of "rebase -i" session can become ambiguous as the rebasing progresses and the repository gains more commits. Make sure the internal record is kept with full 40-hex object names. * es/rebase-i-no-abbrev: rebase -i: fix short SHA-1 collision t3404: rebase -i: demonstrate short SHA-1 collision t3404: make tests more self-contained
2013-08-25rebase -i: fix short SHA-1 collisionLibravatar Junio C Hamano1-1/+1
The 'todo' sheet for interactive rebase shows abbreviated SHA-1's and then performs its operations upon those shortened values. This can lead to an abort if the SHA-1 of a reworded or edited commit is no longer unique within the abbreviated SHA-1 space and a subsequent SHA-1 in the todo list has the same abbreviated value. For example: edit f00dfad first pick badbeef second If, after editing, the new SHA-1 of "first" also has prefix badbeef, then the subsequent 'pick badbeef second' will fail since badbeef is no longer a unique SHA-1 abbreviation: error: short SHA1 badbeef is ambiguous. fatal: Needed a single revision Invalid commit name: badbeef Fix this problem by expanding the SHA-1's in the todo list before performing the operations. [es: also collapse & expand SHA-1's for --edit-todo; respect core.commentchar in transform_todo_ids(); compose commit message] Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-25t3404: rebase -i: demonstrate short SHA-1 collisionLibravatar Eric Sunshine1-0/+24
The 'todo' sheet for interactive rebase shows abbreviated SHA-1's and then performs its operations upon those shortened values. This can lead to an abort if the SHA-1 of a reworded or edited commit is no longer unique within the abbreviated SHA-1 space and a subsequent SHA-1 in the todo list has the same abbreviated value. For example: edit f00dfad first pick badbeef second If, after editing, the new SHA-1 of "first" also has prefix badbeef, then the subsequent 'pick badbeef second' will fail since badbeef is no longer a unique SHA-1 abbreviation: error: short SHA1 badbeef is ambiguous. fatal: Needed a single revision Invalid commit name: badbeef Demonstrate this problem with a couple of specially crafted commits which initially have distinct abbreviated SHA-1's, but for which the abbreviated SHA-1's collide after a simple rewording of the first commit's message. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-25t3404: make tests more self-containedLibravatar Eric Sunshine1-2/+63
As its very first action, t3404 installs (via set_fake_editor) a specialized $EDITOR which simplifies automated 'rebase -i' testing. Many tests rely upon this setting, thus tests which need a different editor must take extra care upon completion to restore $EDITOR in order to avoid breaking following tests. This places extra burden upon such tests and requires that they undesirably have extra knowledge about surrounding tests. Ease this burden by having each test install the $EDITOR it requires, rather than relying upon a global setting. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-07die_with_status: use "printf '%s\n'", not "echo"Libravatar Matthieu Moy1-0/+13
Some implementations of 'echo' (e.g. dash's built-in) interpret backslash sequences in their arguments. This triggered at least one bug: the error message of "rebase -i" was turning \t in commit messages into actual tabulations. There may be others. Using "printf '%s\n'" instead avoids this bad behavior, and is the form used by the "say" function. Noticed-by: David Kastrup <dak@gnu.org> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-18Merge branch 'rr/rebase-reflog-message-reword'Libravatar Junio C Hamano1-0/+15
"git rebase [-i]" used to leave just "rebase" as its reflog message for some operations. This rewords them to be more informative. * rr/rebase-reflog-message-reword: rebase -i: use a better reflog message rebase: use a better reflog message
2013-07-02Do not ignore merge options in interactive rebaseLibravatar Arnaud Fontaine1-0/+11
Merge strategy and its options can be specified in `git rebase`, but with `--interactive`, they were completely ignored. Signed-off-by: Arnaud Fontaine <arnau@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-24Merge branch 'rr/rebase-sha1-by-string-query'Libravatar Junio C Hamano1-0/+11
Allow various commit objects to be given to "git rebase" by ':/look for this string' syntax, e.g. "git rebase --onto ':/there'". * rr/rebase-sha1-by-string-query: rebase: use peel_committish() where appropriate sh-setup: add new peel_committish() helper t/rebase: add failing tests for a peculiar revision