| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This test case was added in 66ae9a57b88 (t3404: rebase -i: demonstrate
short SHA-1 collision, 2013-08-23), and it is not indented in the way we
usually indent sub-shell code in our test cases these days.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"rebase -i" ceased to run post-commit hook by mistake in an earlier
update, which has been corrected.
* pw/post-commit-from-sequencer:
sequencer: run post-commit hook
move run_commit_hook() to libgit and use it there
sequencer.h fix placement of #endif
t3404: remove uneeded calls to set_fake_editor
t3404: set $EDITOR in subshell
t3404: remove unnecessary subshell
|
|
Prior to commit 356ee4659b ("sequencer: try to commit without forking
'git commit'", 2017-11-24) the sequencer would always run the
post-commit hook after each pick or revert as it forked `git commit` to
create the commit. The conversion to committing without forking `git
commit` omitted to call the post-commit hook after creating the commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests were calling set_fake_editor to ensure they had a sane no-op
editor set. Now that all the editor setting is done in subshells these
tests can rely on EDITOR=: and so do not need to call set_fake_editor.
Also add a test at the end to detect any future additions messing with
the exported value of $EDITOR.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As $EDITOR is exported setting it in one test affects all subsequent
tests. Avoid this by always setting it in a subshell. This commit leaves
20 calls to set_fake_editor that are not in subshells as they can
safely be removed in the next commit once all the other editor setting
is done inside subshells.
I have moved the call to set_fake_editor in some tests so it comes
immediately before the call to 'git rebase' to avoid moving unrelated
commands into the subshell. In one case ('rebase -ix with
--autosquash') the call to set_fake_editor is moved past an invocation
of 'git rebase'. This is safe as that invocation of 'git rebase'
requires EDITOR=: or EDITOR=fake-editor.sh without FAKE_LINES being
set which will be the case as the preceding tests either set their
editor in a subshell or call set_fake_editor without setting FAKE_LINES.
In a one test ('auto-amend only edited commits after "edit"') a call
to test_tick are now in a subshell. I think this is OK as it is there
to set the date for the next commit which is executed in the same
subshell rather than updating GIT_COMMITTER_DATE for later tests (the
next test calls test_tick before doing anything else).
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Neither of the commands executed in the subshell change any shell
variables or the current directory so there is no need for them to be
executed in a subshell.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" showed a wrong HEAD while "reword" open the editor.
* pw/rebase-i-show-HEAD-to-reword:
sequencer: simplify root commit creation
rebase -i: check for updated todo after squash and reword
rebase -i: always update HEAD before rewording
|
|
"git rebase --keep-base <upstream>" tries to find the original base
of the topic being rebased and rebase on top of that same base,
which is useful when running the "git rebase -i" (and its limited
variant "git rebase -x").
The command also has learned to fast-forward in more cases where it
can instead of replaying to recreate identical commits.
* dl/rebase-i-keep-base:
rebase: teach rebase --keep-base
rebase tests: test linear branch topology
rebase: fast-forward --fork-point in more cases
rebase: fast-forward --onto in more cases
rebase: refactor can_fast_forward into goto tower
t3432: test for --no-ff's interaction with fast-forward
t3432: distinguish "noop-same" v.s. "work-same" in "same head" tests
t3432: test rebase fast-forward behavior
t3431: add rebase --fork-point tests
|
|
Code cleanup.
* dl/use-sq-from-test-lib:
t: use common $SQ variable
|
|
Preparation for SHA-256 upgrade continues in the test department.
* bc/hash-independent-tests-part-5:
t4009: make hash size independent
t4002: make hash independent
t4000: make hash size independent
t3903: abstract away SHA-1-specific constants
t3800: make hash-size independent
t3600: make hash size independent
t3506: make hash independent
t3430: avoid hard-coded object IDs
t3404: abstract away SHA-1-specific constants
t3306: abstract away SHA-1-specific constants
t3305: make hash size independent
t3301: abstract away SHA-1-specific constants
t3206: abstract away hash size constants
t3201: abstract away SHA-1-specific constants
|
|
In many test scripts, there are bespoke definitions of the single quote
that are some variation of this:
SQ="'"
Define a common $SQ variable in test-lib.sh and replace all usages of
these bespoke variables with the common one.
This change was done by running `git grep =\"\'\" t/` and
`git grep =\\\\\'` and manually changing the resulting definitions and
corresponding usages.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few test scripts assign a single LF to $LF, but that is already
given by test-lib.sh to everybody.
Remove the unnecessary reassignment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before, when we had the following graph,
A---B---C (master)
\
D (side)
running 'git rebase --onto master... master side' would result in D
being always rebased, no matter what. However, the desired behavior is
that rebase should notice that this is fast-forwardable and do that
instead.
Add detection to `can_fast_forward` so that this case can be detected
and a fast-forward will be performed. First of all, rewrite the function
to use gotos which simplifies the logic. Next, since the
options.upstream &&
!oidcmp(&options.upstream->object.oid, &options.onto->object.oid)
conditions were removed in `cmd_rebase`, we reintroduce a substitute in
`can_fast_forward`. In particular, checking the merge bases of
`upstream` and `head` fixes a failing case in t3416.
The abbreviated graph for t3416 is as follows:
F---G topic
/
A---B---C---D---E master
and the failing command was
git rebase --onto master...topic F topic
Before, Git would see that there was one merge base (C), and the merge
and onto were the same so it would incorrectly return 1, indicating that
we could fast-forward. This would cause the rebased graph to be 'ABCFG'
when we were expecting 'ABCG'.
With the additional logic, we detect that upstream and head's merge base
is F. Since onto isn't F, it means we're not rebasing the full set of
commits from master..topic. Since we're excluding some commits, a
fast-forward cannot be performed and so we correctly return 0.
Add '-f' to test cases that failed as a result of this change because
they were not expecting a fast-forward so that a rebase is forced.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. Add a use of $EMPTY_TREE instead of a
hard-coded value. Remove a comment about hard-coded hashes which is no
longer applicable.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user runs git log while rewording a commit it is confusing if
sometimes we're amending the commit that's being reworded and at other
times we're creating a new commit depending on whether we could
fast-forward or not[1]. Fix this inconsistency by always committing the
picked commit and then running 'git commit --amend' to do the reword.
The first commit is performed by the sequencer without forking git
commit and does not impact on the speed of rebase. In a test rewording
100 commits with
GIT_EDITOR=true GIT_SEQUENCE_EDITOR='sed -i s/pick/reword/' \
../bin-wrappers/git rebase -i --root
and taking the best of three runs the current master took
957ms and with this patch it took 961ms.
This change fixes rewording the new root commit when rearranging commits
with --root.
Note that the new code no longer updates CHERRY_PICK_HEAD after creating
a root commit - I'm not sure why the old code was that creating that ref
after a successful commit, everywhere else it is removed after a
successful commit.
[1] https://public-inbox.org/git/xmqqlfvu4be3.fsf@gitster-ct.c.googlers.com/T/#m133009cb91cf0917bcf667300f061178be56680a
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
|
|
Typofix.
* js/t3404-typofix:
t3404: fix a typo
|
|
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
|
|
Typofix.
* js/t3404-typofix:
t3404: fix a typo
|
|
The test 'rebase -i respects rebase.missingCommitsCheck = warn' is
mainly interested in the warning about the dropped commits, but it
checks the whole output of 'git rebase', including progress lines and
what not that are not at all relevant to 'rebase.missingCommitsCheck',
but make it necessary to update this test whenever e.g. the way we
show progress is updated (as it will happen in one of the later
patches of this series).
Modify the test to verify only the first four lines of 'git rebase's
output that contain all the important lines, notably the line
containing the "Warning:" itself and the oneline log of the dropped
commit.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 't3404-rebase-interactive.sh' the expected output of several tests
is prepared from here documents, which are outside of
'test_expect_success' blocks and have spaces around redirection
operators.
Move these here documents into the corresponding 'test_expect_success'
block and avoid spaces between filename and redition operators.
Furthermore, quote the here docs' delimiter word to prevent parameter
expansions and what not, where applicable.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This one slipped through the review of a9279c678588 (sequencer: do not
squash 'reword' commits when we hit conflicts, 2018-06-19).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a recently introduced regression in c762aada1a ("rebase -x: sanity
check command", 2019-01-29) triggered when running the tests with
GIT_TEST_REBASE_USE_BUILTIN=false. See 62c23938fa ("tests: add a
special setup where rebase.useBuiltin is off", 2018-11-14) for how
that test mode works.
As discussed on-list[1] it's not worth it to implement the sanity
check in the legacy rebase code, we plan to remove it after the 2.21
release. So let's do the bare minimum to make the tests pass under the
GIT_TEST_REBASE_USE_BUILTIN=false special setup.
1. https://public-inbox.org/git/xmqqva1nbeno.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -x $cmd" did not reject multi-line command, even though
the command is incapable of handling such a command. It now is
rejected upfront.
* pw/rebase-x-sanity-check:
rebase -x: sanity check command
|
|
If the user gives an empty argument to --exec then git creates a todo
list that it cannot parse. The rebase starts to run before erroring out
with
error: missing arguments for exec
error: invalid line 2: exec
You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.
Or you can abort the rebase with 'git rebase --abort'.
Instead check for empty commands before starting the rebase.
Also check that the command does not contain any newlines as the
todo-list format is unable to cope with multiline commands. Note that
this changes the behavior, before this change one could do
git rebase --exec='echo one
exec echo two'
and it would insert two exec lines in the todo list, now it will error
out.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If GIT_SEQUENCE_EDITOR is set then rebase runs it when executing
implicit interactive rebases which are supposed to appear
non-interactive to the user. Fix this by setting GIT_SEQUENCE_EDITOR=:
rather than GIT_EDITOR=:. A couple of tests relied on the old behavior
so they are updated to work with the new regime.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation to the day when we can deprecate and remove the
"rebase -p", make sure we can skip and later remove tests for
it.
* js/rebase-p-tests:
tests: optionally skip `git rebase -p` tests
t3418: decouple test cases from a previous `rebase -p` test case
t3404: decouple some test cases from outcomes of previous test cases
|
|
* sg/test-rebase-editor-fix:
t3404-rebase-interactive: test abbreviated commands
|
|
The `--preserve-merges` mode of the `rebase` command is slated to be
deprecated soon, as the more powerful `--rebase-merges` mode is
available now, and the latter was designed with the express intent to
address the shortcomings of `--preserve-merges`' design (e.g. the
inability to reorder commits in an interactive rebase).
As such, we will eventually even remove the `--preserve-merges` support,
and along with it, its tests.
In preparation for this, and also to allow the Windows phase of our
automated tests to save some well-needed time when running the test
suite, this commit introduces a new prerequisite REBASE_P, which can be
forced to being unmet by setting the environment variable
`GIT_TEST_SKIP_REBASE_P` to any non-empty string.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, the `--preserve-merges` option of the `git rebase` command
piggy-backed on top of the `--interactive` feature. For that reason, the
early test cases were added to the very same test script that contains
the `git rebase -i` tests: `t3404-rebase-interactive.sh`.
However, since c42abfe7857 (rebase: introduce a dedicated backend for
--preserve-merges, 2018-05-28), the `--preserve-merges` feature got its
own backend, in preparation for converting the rest of the
`--interactive` code to built-in code, written in C rather than shell.
The reason why the `--preserve-merges` feature was not converted at the
same time is that we have something much better now: `--rebase-merges`.
That option intends to supersede `--preserve-merges`, and we will
probably deprecate the latter soon.
Once `--preserve-merges` has been deprecated for a good amount of time,
it will be time to remove it, and along with it, its tests.
In preparation for that, let's make the rest of the test cases in
`t3404-rebase-interactive.sh` independent of the test cases dedicated to
`--preserve-merges`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
|
|
Make sure that each short command is tested at least once. To
not exacerbate the runtime of the test script, do not add new
tests, but modify existing ones according to these criteria:
- The test does not have a prerequisite.
- The 'git rebase' command is not guarded by test_must_fail.
The pick commands are optional in the FAKE_LINES variable, but
when used, they do end up in the insn sheet. Test them, too.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" etc. in Git 2.19 fails to abort when given an empty
commit log message as result of editing, which has been corrected.
* en/sequencer-empty-edit-result-aborts:
sequencer: fix --allow-empty-message behavior, make it smarter
|
|
In commit b00bf1c9a8dd ("git-rebase: make --allow-empty-message the
default", 2018-06-27), several arguments were given for transplanting
empty commits without halting and asking the user for confirmation on
each commit. These arguments were incomplete because the logic clearly
assumed the only cases under consideration were transplanting of commits
with empty messages (see the comment about "There are two sources for
commits with empty messages). It didn't discuss or even consider
rewords, squashes, etc. where the user is explicitly asked for a new
commit message and provides an empty one. (My bad, I totally should
have thought about that at the time, but just didn't.)
Rewords and squashes are significantly different, though, as described
by SZEDER:
Let's suppose you start an interactive rebase, choose a commit to
squash, save the instruction sheet, rebase fires up your editor, and
then you notice that you mistakenly chose the wrong commit to
squash. What do you do, how do you abort?
Before [that commit] you could clear the commit message, exit the
editor, and then rebase would say "Aborting commit due to empty
commit message.", and you get to run 'git rebase --abort', and start
over.
But [since that commit, ...] saving the commit message as is would
let rebase continue and create a bunch of unnecessary objects, and
then you would have to use the reflog to return to the pre-rebase
state.
Also, he states:
The instructions in the commit message template, which is shown for
'reword' and 'squash', too, still say...
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
These are sound arguments that when editing commit messages during a
sequencer operation, that if the commit message is empty then the
operation should halt and ask the user to correct. The arguments in
commit b00bf1c9a8dd (referenced above) still apply when transplanting
previously created commits with empty commit messages, so the sequencer
should not halt for those.
Furthermore, all rationale so far applies equally for cherry-pick as for
rebase. Therefore, make the code default to --allow-empty-message when
transplanting an existing commit, and to default to halting when the
user is asked to edit a commit message and provides an empty one -- for
both rebase and cherry-pick.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code. These are
fixed.
* pw/rebase-i-author-script-fix:
sequencer: fix quoting in write_author_script
sequencer: handle errors from read_author_ident()
|
|
This rewrites complete_action() from shell to C.
A new mode is added to rebase--helper (`--complete-action`), as well as
a new flag (`--autosquash`).
Finally, complete_action() is stripped from git-rebase--interactive.sh.
The original complete_action() would return the code 2 when the todo
list contained no actions. This was a special case for rebase -i and
-p; git-rebase.sh would then apply the autostash, delete the state
directory, and die with the message "Nothing to do". This cleanup is
rewritten in C instead of returning 2. As rebase -i no longer returns
2, the comment describing this behaviour in git-rebase.sh is updated to
reflect this change.
The message "Nothing to do" is now printed with error(), and so becomes
"error: nothing to do". Some tests in t3404 check this value, so they
are updated to fit this change.
The first check might seem useless as we write "noop" to the todo list
if it is empty. Actually, the todo list might contain commented
commands (ie. empty commits). In this case, complete_action() won’t
write "noop", and will abort without starting the editor.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "author-script" file "git rebase -i" creates got broken when
we started to move the command away from shell script, which is
getting fixed now.
* es/rebase-i-author-script-fix:
sequencer: don't die() on bogus user-edited timestamp
sequencer: fix "rebase -i --root" corrupting author header timestamp
sequencer: fix "rebase -i --root" corrupting author header timezone
sequencer: fix "rebase -i --root" corrupting author header
|
|
If the todo list generated by `--make-script` is empty,
complete_action() writes a noop, but if it has only commented-out
commands, it will abort with the message "Nothing to do", and does not
launch the editor. This adds a new test to ensure that
complete_action() behaves this way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Single quotes should be escaped as \' not \\'. The bad quoting breaks
the interactive version of 'rebase --root' (which is used when there
is no '--onto' even if the user does not specify --interactive) for
authors that contain "'" as sq_dequote() called by read_author_ident()
errors out on the bad quoting.
For other interactive rebases this only affects external scripts that
read the author script and users whose git is upgraded from the shell
version of rebase -i while rebase was stopped when the author contains
"'". This is because the parsing in read_env_script() expected the
broken quoting.
This patch includes code to handle the broken quoting when
git has been upgraded while rebase was stopped. It does this by
detecting the missing "'" at the end of the GIT_AUTHOR_DATE line to see
if it should dequote \\' as "'". Note this is only implemented for
normal picks, not for creating a new root commit (rebase will stop with
an error complaining out bad quoting in that case).
The fallback code has been manually tested by reverting both the quoting
fixes in write_author_script() and the previous fix for the missing "'"
at the end of the GIT_AUTHOR_DATE line and running
t3404-rebase-interactive.sh.
Ideally rebase and am would share the same code for reading and
writing the author script, but this commit just fixes the immediate
bug.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" started exporting GIT_DIR environment variable and
exposing it to hook scripts when part of it got rewritten in C.
Instead of matching the old scripted Porcelains' behaviour,
compensate by also exporting GIT_WORK_TREE environment as well to
lessen the damage. This can harm existing hooks that want to
operate on different repository, but the current behaviour is
already broken for them anyway.
* bc/sequencer-export-work-tree-as-well:
sequencer: pass absolute GIT_WORK_TREE to exec commands
|
|
Test clean-up and corrections.
* es/test-fixes: (26 commits)
t5608: fix broken &&-chain
t9119: fix broken &&-chains
t9000-t9999: fix broken &&-chains
t7000-t7999: fix broken &&-chains
t6000-t6999: fix broken &&-chains
t5000-t5999: fix broken &&-chains
t4000-t4999: fix broken &&-chains
t3030: fix broken &&-chains
t3000-t3999: fix broken &&-chains
t2000-t2999: fix broken &&-chains
t1000-t1999: fix broken &&-chains
t0000-t0999: fix broken &&-chains
t9814: simplify convoluted check that command correctly errors out
t9001: fix broken "invoke hook" test
t7810: use test_expect_code() instead of hand-rolled comparison
t7400: fix broken "submodule add/reconfigure --force" test
t7201: drop pointless "exit 0" at end of subshell
t6036: fix broken "merge fails but has appropriate contents" tests
t5505: modernize and simplify hard-to-digest test
t5406: use write_script() instead of birthing shell script manually
...
|
|
When "git rebase -i --root" creates a new root commit, it corrupts the
"author" header's timestamp by prepending a "@":
author A U Thor <author@example.com> @1112912773 -0700
The commit parser is very strict about the format of the "author"
header, and does not allow a "@" in that position.
The "@" comes from GIT_AUTHOR_DATE in "rebase-merge/author-script",
signifying a Unix epoch-based timestamp, however, read_author_ident()
incorrectly allows it to slip into the commit's "author" header, thus
corrupting it.
One possible fix would be simply to filter out the "@" when constructing
the "author" header timestamp, however, a more correct fix is to parse
the GIT_AUTHOR_DATE date (via parse_date()) and format the parsed result
into the "author" header. Since "rebase-merge/author-script" may be
edited by the user, this approach has the extra benefit of catching
other potential timestamp corruption due to hand-editing.
We can do better than calling parse_date() ourselves and constructing
the "author" header manually, however, by instead taking advantage of
fmt_ident() which does this work for us.
The benefits of using fmt_ident() are twofold. First, it simplifies the
logic considerably by allowing us to avoid the complexity of building
the "author" header in parallel with and in the same buffer from which
"rebase-merge/author-script" is being parsed. Instead, fmt_ident() is
invoked to compose the header after parsing is complete.
Second, fmt_ident() is careful to prevent "crud" from polluting the
composed ident. As with validating GIT_AUTHOR_DATE, this "crud"
avoidance prevents other (possibly hand-edited) bogus author information
from "rebase-merge/author-script" from corrupting the commit object.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git rebase -i --root" creates a new root commit, it corrupts the
"author" header's timezone by repeating the last digit:
author A U Thor <author@example.com> @1112912773 -07000
This is due to two bugs.
First, write_author_script() neglects to add the closing quote to the
value of GIT_AUTHOR_DATE when generating "rebase-merge/author-script".
Second, although sq_dequote() correctly diagnoses the missing closing
quote, read_author_ident() ignores sq_dequote()'s return value and
blindly uses the result of the aborted dequote.
sq_dequote() performs dequoting in-place by removing quoting and
shifting content downward. When it detects misquoting (lack of closing
quote, in this case), it gives up and returns an error without inserting
a NUL-terminator at the end of the shifted content, which explains the
duplicated last digit in the timezone.
(Note that the "@" preceding the timestamp is a separate bug which
will be fixed subsequently.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git rebase -i --root" creates a new root commit (say, by swapping
in a different commit for the root), it corrupts the commit's "author"
header with trailing garbage:
author A U Thor <author@example.com> @1112912773 -07000or@example.com
This is a result of read_author_ident() neglecting to NUL-terminate the
buffer into which it composes the "author" header.
(Note that the "@" preceding the timestamp and the extra "0" in the
timezone are separate bugs which will be fixed subsequently.)
Security considerations: Construction of the "author" header by
read_author_ident() happens in-place and in parallel with parsing the
content of "rebase-merge/author-script" which occupies the same buffer.
This is possible because the constructed "author" header is always
smaller than the content of "rebase-merge/author-script". Despite
neglecting to NUL-terminate the constructed "author" header, memory is
never accessed (either by read_author_ident() or its caller) beyond the
allocated buffer since a NUL-terminator is present at the end of the
loaded "rebase-merge/author-script" content, and additional NUL's are
inserted as part of the parsing process.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct a broken use of "VAR=VAL shell_func" in a test.
* jc/t3404-one-shot-export-fix:
t3404: fix use of "VAR=VAL cmd" with a shell function
|
|
"git rebase" behaved slightly differently depending on which one of
the three backends gets used; this has been documented and an
effort to make them more uniform has begun.
* en/rebase-consistency:
git-rebase: make --allow-empty-message the default
t3401: add directory rename testcases for rebase and am
git-rebase.txt: document behavioral differences between modes
directory-rename-detection.txt: technical docs on abilities and limitations
git-rebase.txt: address confusion between --no-ff vs --force-rebase
git-rebase: error out when incompatible options passed
t3422: new testcases for checking when incompatible options passed
git-rebase.sh: update help messages a bit
git-rebase.txt: document incompatible options
|
|
The sequencer currently passes GIT_DIR, but not GIT_WORK_TREE, to exec
commands. In that configuration, we assume that whatever directory
we're in is the top level of the work tree, and git rev-parse
--show-toplevel responds accordingly. However, when we're in a
subdirectory, that isn't correct: we respond with the subdirectory as
the top level, resulting in unexpected behavior.
Ensure that we pass GIT_WORK_TREE as well as GIT_DIR so that git
operations within subdirectories work correctly.
Note that we are guaranteed to have a work tree in this case: the
relevant sequencer functions are called only from revert, cherry-pick,
and rebase--helper; all of these commands require a working tree.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Junio C Hamano
Phillip Wood
Denton Liu
brian m. carlson
SZEDER Gábor
Ævar Arnfjörð Bjarmason
Johannes Sixt
Elijah Newren
Alban Gruin
Eric Sunshine