summaryrefslogtreecommitdiff
path: root/t/t3400-rebase.sh
AgeCommit message (Collapse)AuthorFilesLines
2009-06-18am, rebase: teach quiet optionLibravatar Stephen Boyd1-6/+13
git-am and git-rebase are talkative scripts. Teach them to be quiet when told, allowing them to speak only when they fail or experience errors. The quiet option is maintained when git-am or git-rebase fails to apply a patch. This means subsequent --resolved, --continue, --skip, --abort invocations will be quiet if the original invocation was quiet. Drop a handful of >&2 redirection; the rest of the program sends all the info messages to stdout, not to stderr. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-24t/t3400-rebase.sh: add more tests to help migrating git-rebase.sh to CLibravatar Nguyễn Thái Ngọc Duy1-0/+31
These new tests make sure I don't miss any check being performed before rebase is proceeded (which is well tested by other tests) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-19test-lib: Introduce test_chmod and use it instead of update-index --chmodLibravatar Johannes Sixt1-2/+2
This function replaces sequences of 'chmod +x' and 'git update-index --chmod=+x' in the test suite, whose purpose is to help filesystems that need core.filemode=false. Two places where only 'chmod +x' was used we also use this new function. The function calls 'git update-index --chmod' without checking core.filemode (unlike some of the call sites did). We do this because the call sites *expect* that the executable bit ends up in the index (ie. it is not the purpose of the call sites to *test* whether git treats 'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on filesystems with core.filemode=true the 'git update-index --chmod' is a no-op. The function uses --add with update-index to help one call site in t6031-merge-recursive. It makes no difference for the other callers. Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-01t3400-rebase: Move detached HEAD check earlierLibravatar Johannes Sixt1-4/+4
Short story: There is a section in t3400 that tests fundamental rebase properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09) added a check that rebase works on a detached HEAD, but the test was put near the end of the file. This moves it to a more suitable place. Long story: The test that preceded the one in question tests that a rebased commit degrades from a content change with mode change to a mere mode change. But on Windows, where we have core.filemode=false, the original commit did not record the mode change, and so the rebase operation did not rebase anything. This caused the subsequent detached HEAD test to fail. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-08Add two extra tests for git rebaseLibravatar Johannes Schindelin1-1/+12
2008-09-03tests: use "git xyzzy" form (t0000 - t3599)Libravatar Nanako Shiraishi1-3/+3
Converts tests between t0050-t3903. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-14Merge branch 'bd/tests'Libravatar Junio C Hamano1-1/+2
* bd/tests: Rename the test trash directory to contain spaces. Fix tests breaking when checkout path contains shell metacharacters Don't use the 'export NAME=value' in the test scripts. lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters test-lib.sh: Fix some missing path quoting Use test_set_editor in t9001-send-email.sh test-lib.sh: Add a test_set_editor function to safely set $VISUAL git-send-email.perl: Handle shell metacharacters in $EDITOR properly config.c: Escape backslashes in section names properly git-rebase.sh: Fix --merge --abort failures when path contains whitespace Conflicts: t/t9115-git-svn-dcommit-funky-renames.sh
2008-05-13fix bsd shell negationLibravatar Jeff King1-2/+2
On some shells (notably /bin/sh on FreeBSD 6.1), the construct foo && ! bar | baz is true if foo && baz whereas for most other shells (such as bash) is true if foo && ! baz We can work around this by specifying foo && ! (bar | baz) which works everywhere. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Don't use the 'export NAME=value' in the test scripts.Libravatar Bryan Donlan1-1/+2
This form is not portable across all shells, so replace instances of: export FOO=bar with: FOO=bar export FOO Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01Sane use of test_expect_failureLibravatar Junio C Hamano1-2/+2
Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-16apply --index-info: fall back to current index for mode changesLibravatar Johannes Schindelin1-0/+15
"git diff" does not record index lines for pure mode changes (i.e. no lines changed). Therefore, apply --index-info would call out a bogus error. Instead, fall back to reading the info from the current index. Incidentally, this fixes an error where git-rebase would not rebase a commit including a pure mode change, and changes requiring a threeway merge. Noticed and later tested by Chris Shoemaker. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-04Allow rebase to run if upstream is completely mergedLibravatar Johannes Sixt1-1/+38
Consider this history: o--o-...-B <- origin \ \ x--x--M--x--x <- master In this situation, rebase considers master fully up-to-date and would not do anything. However, if there were additional commits on origin, the rebase would run and move the commits x on top of origin. Here we change rebase to short-circuit out only if the history since origin is strictly linear. Consequently, the above as well as a history like this would be linearized: o--o <- origin \ x--x \ \ x--M--x--x <- master Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-3/+3
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2005-12-14git rebase loses author name/email if given bad email addressLibravatar Amos Waterland1-0/+34
If GIT_AUTHOR_EMAIL is of a certain form, `git rebase master' will blow away the author name and email when fast-forward merging commits. I have not tracked it down, but here is a testcase that demonstrates the behavior. Signed-off-by: Amos Waterland <apw@us.ibm.com> Acked-by: Michal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>