| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* ph/rebase-original:
rebase: find orig_head unambiguously
|
|
When we 'git rebase $upstream', git uses 'rev-parse --verify
$current_branch' to find ORIG_HEAD. But if $current_branch
is ambiguous, 'rev-parse --verify' emits a warning and returns
a SHA1 anyway. When the wrong ambiguous choice is used,
git-rebase fails non-gracefully: it emits a warning about
failing to lock $current_branch, an error about being unable to
checkout $current_branch again, and it might even decide the
rebase is a fast-forward when it is not.
In the 'rebase $upstream' case, we already know the unambiguous
spelling of $current_branch is "HEAD". Fix git-rebase to find
$orig_head unambiguously.
Add a test in t3400-rebase.sh which creates an ambiguous branch
name and rebases it implicitly with 'git rebase $other'.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current message is too long and at too low a level for anybody
to understand it if they don't know about the configuration format
already.
The text about setting up a remote is superfluous and doesn't help
understand or recover from the error that has happened. Show the
usage more prominently and explain how to set up the tracking
information. If there is only one remote, that name is used instead
of the generic <remote>.
Also simplify the message we print on detached HEAD to remove
unnecessary information which is better left for the documentation.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/parse-date-raw:
parse_date(): '@' prefix forces git-timestamp
parse_date(): allow ancient git-timestamp
|
|
The only place that the issue this series addresses was observed
where we read "cat-file commit" output and put it in GIT_AUTHOR_DATE
in order to replay a commit with an ancient timestamp.
With the previous patch alone, "git commit --date='20100917 +0900'"
can be misinterpreted to mean an ancient timestamp, not September in
year 2010. Guard this codepath by requring an extra '@' in front of
the raw git timestamp on the parsing side. This of course needs to
be compensated by updating get_author_ident_from_commit and the code
for "git commit --amend" to prepend '@' to the string read from the
existing commit in the GIT_AUTHOR_DATE environment variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide failures from
earlier commands in the chain by adding " &&" at the end of line to the
commands that need them.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git rebase' without arguments is currently not supported. Make it
default to 'git rebase @{upstream}'. That is also what 'git pull
[--rebase]' defaults to, so it only makes sense that 'git rebase'
defaults to the same thing.
Defaulting to @{upstream} will make it possible to run e.g. 'git
rebase -i' without arguments, which is probably a quite common use
case. It also improves the scenario where you have multiple branches
that rebase against a remote-tracking branch, where you currently have
to choose between the extra network delay of 'git pull' or the
slightly awkward keys to enter 'git rebase @{u}'.
The error reporting when no upstream is configured for the current
branch or when no branch is checked out is reused from git-pull.sh. A
function is extracted into git-parse-remote.sh for this purpose.
Helped-by: Yann Dirson <ydirson@altern.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dg/local-mod-error-messages:
t7609: test merge and checkout error messages
unpack_trees: group error messages by type
merge-recursive: distinguish "removed" and "overwritten" messages
merge-recursive: porcelain messages for checkout
Turn unpack_trees_options.msgs into an array + enum
Conflicts:
t/t3400-rebase.sh
|
|
When an error is encountered, it calls add_rejected_file() which either
- directly displays the error message and stops if in plumbing mode
(i.e. if show_all_errors is not initialized at 1)
- or stores it so that it will be displayed at the end with display_error_msgs(),
Storing the files by error type permits to have a list of files for
which there is the same error instead of having a serie of almost
identical errors.
As each bind_overlap error combines a file and an old file, a list cannot be
done, therefore, theses errors are not stored but directly displayed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently do not disable diff.renames configuration while rebase
internally runs "format-patch" to feed "am -3".
The end user configuration for "diff" should not affect the result
produced by the higher level command that is related to "diff" only
because internally it is implemented in terms of it.
For that matter, I have a feeling that format-patch should not even look
at diff.renames, but we seem to have been doing this for a long time so
there is no easy way to fix this thinko.
In any case, here is a much straightforward fix for "rebase".
[jn: with test case from David]
Reported-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test used 5-space indents since it was added in 2005, but
recently the temptation to use tabs to indent has been too
strong, resulting in uneven whitespace. Switch over completely
to tabs.
While at it, use a more modern style for consistency with other
tests:
- names of tests go on the same line as test_expect_success;
- extra whitespace after > redirection operators is removed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-am-rebase-invalid-author:
am: use get_author_ident_from_commit instead of mailinfo when rebasing
|
|
In certain situations, commit authorship can consist of an invalid
e-mail address. For example, this is the case when working with git svn
repos where the author email has had the svn repo UUID appended such as:
author@example.com <author@example.com@deadbeef-dead-beef-dead-beefdeadbeef>
Given such an address, mailinfo extracts the authorship incorrectly as
it assumes a valid domain. However, when rebasing the original
authorship should be preserved irrespective of its validity as an email
address.
Using get_author_ident_from_commit instead of mailinfo when rebasing
preserves the original authorship.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Strip out options before checking for a missing upstream argument.
Before:
$ git rebase -m
shift: 426: can't shift that many
After:
$ git rebase -m
Usage: git rebase ...
While at it, fix the usage message to explain that the upstream
argument is mandatory.
Reported-by: Jon Dowland <jmtd@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
|
|
Luckily, all the support already happens to be there.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
append_cr(), remove_cr(), q_to_nul() and q_to_cr() are defined in multiple
tests. Consolidate them into test-lib.sh so we can stop redefining them.
The use of remove_cr() in t0020 to test for a CR is replaced with a new
function has_cr() to accurately reflect what is intended (the output of
remove_cr() was being thrown away).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not that uncommon to have mails with DOS line-ending, notably
Thunderbird and web mailers like Gmail (when saving what they call
"original" message). So modify mailsplit to convert CRLF line-endings to
just LF.
Since git-rebase is built on top of git-am, add an option to mailsplit to
be used by git-am when it is acting on behalf of git-rebase, to refrain
from doing this conversion.
And add a test to make sure that rebase still works.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-am and git-rebase are talkative scripts. Teach them to be quiet when
told, allowing them to speak only when they fail or experience errors.
The quiet option is maintained when git-am or git-rebase fails to apply
a patch. This means subsequent --resolved, --continue, --skip, --abort
invocations will be quiet if the original invocation was quiet.
Drop a handful of >&2 redirection; the rest of the program sends all the
info messages to stdout, not to stderr.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These new tests make sure I don't miss any check being performed before
rebase is proceeded (which is well tested by other tests)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function replaces sequences of 'chmod +x' and 'git update-index
--chmod=+x' in the test suite, whose purpose is to help filesystems
that need core.filemode=false. Two places where only 'chmod +x' was used
we also use this new function.
The function calls 'git update-index --chmod' without checking
core.filemode (unlike some of the call sites did). We do this because the
call sites *expect* that the executable bit ends up in the index (ie. it
is not the purpose of the call sites to *test* whether git treats
'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on
filesystems with core.filemode=true the 'git update-index --chmod' is a
no-op.
The function uses --add with update-index to help one call site in
t6031-merge-recursive. It makes no difference for the other callers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Converts tests between t0050-t3903.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bd/tests:
Rename the test trash directory to contain spaces.
Fix tests breaking when checkout path contains shell metacharacters
Don't use the 'export NAME=value' in the test scripts.
lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters
test-lib.sh: Fix some missing path quoting
Use test_set_editor in t9001-send-email.sh
test-lib.sh: Add a test_set_editor function to safely set $VISUAL
git-send-email.perl: Handle shell metacharacters in $EDITOR properly
config.c: Escape backslashes in section names properly
git-rebase.sh: Fix --merge --abort failures when path contains whitespace
Conflicts:
t/t9115-git-svn-dcommit-funky-renames.sh
|
|
On some shells (notably /bin/sh on FreeBSD 6.1), the
construct
foo && ! bar | baz
is true if
foo && baz
whereas for most other shells (such as bash) is true if
foo && ! baz
We can work around this by specifying
foo && ! (bar | baz)
which works everywhere.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This form is not portable across all shells, so replace instances of:
export FOO=bar
with:
FOO=bar
export FOO
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff" does not record index lines for pure mode changes (i.e. no
lines changed). Therefore, apply --index-info would call out a bogus
error.
Instead, fall back to reading the info from the current index.
Incidentally, this fixes an error where git-rebase would not rebase a
commit including a pure mode change, and changes requiring a threeway
merge.
Noticed and later tested by Chris Shoemaker.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consider this history:
o--o-...-B <- origin
\ \
x--x--M--x--x <- master
In this situation, rebase considers master fully up-to-date and would
not do anything. However, if there were additional commits on origin,
the rebase would run and move the commits x on top of origin.
Here we change rebase to short-circuit out only if the history since origin
is strictly linear. Consequently, the above as well as a history like this
would be linearized:
o--o <- origin
\
x--x
\ \
x--M--x--x <- master
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses the remove-dashes target to replace "git-frotz" to "git frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If GIT_AUTHOR_EMAIL is of a certain form, `git rebase master' will blow
away the author name and email when fast-forward merging commits. I
have not tracked it down, but here is a testcase that demonstrates the
behavior.
Signed-off-by: Amos Waterland <apw@us.ibm.com>
Acked-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Phil Hord
Yann Droneaud
Jiang Xin
Carlos Martín Nieto
Ramkumar Ramachandra
Martin von Zweigbergk
Matthieu Moy
Jonathan Nieder
Jay Soffian
Thomas Rast
Stephen Boyd
Nguyễn Thái Ngọc Duy
Johannes Sixt
Johannes Schindelin
Nanako Shiraishi
Jeff King
Bryan Donlan
Johannes Sixt
Amos Waterland