summaryrefslogtreecommitdiff
path: root/t/t3400-rebase.sh
AgeCommit message (Collapse)AuthorFilesLines
2013-04-26Merge branch 'ph/rebase-original'Libravatar Junio C Hamano1-0/+7
* ph/rebase-original: rebase: find orig_head unambiguously
2013-04-23rebase: find orig_head unambiguouslyLibravatar Phil Hord1-0/+7
When we 'git rebase $upstream', git uses 'rev-parse --verify $current_branch' to find ORIG_HEAD. But if $current_branch is ambiguous, 'rev-parse --verify' emits a warning and returns a SHA1 anyway. When the wrong ambiguous choice is used, git-rebase fails non-gracefully: it emits a warning about failing to lock $current_branch, an error about being unable to checkout $current_branch again, and it might even decide the rebase is a fast-forward when it is not. In the 'rebase $upstream' case, we already know the unambiguous spelling of $current_branch is "HEAD". Fix git-rebase to find $orig_head unambiguously. Add a test in t3400-rebase.sh which creates an ambiguous branch name and rebases it implicitly with 'git rebase $other'. Signed-off-by: Phil Hord <hordp@cisco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-25t3400: use test_config to set/unset git config variablesLibravatar Yann Droneaud1-2/+1
Instead of using construct such as: test_when_finished "git config --unset <key>" git config <key> <value> uses test_config <key> <value> The latter takes care of removing <key> at the end of the test. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-25i18n: rebase: mark messages for translationLibravatar Jiang Xin1-4/+4
Mark messages in git-rebase.sh for translation. While doing this Jonathan noticed that the comma usage and sentence structure of the resolvemsg was not quite right, so correct that and its cousins in git-am.sh and t/t0201-gettext-fallbacks.sh at the same time. Some tests would start to fail with GETTEXT_POISON turned on after this update. Use test_i18ncmp and test_i18ngrep where appropriate to mark strings that should only be checked in the C locale output to avoid such issues. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-04Make git-{pull,rebase} message without tracking information friendlierLibravatar Carlos Martín Nieto1-4/+2
The current message is too long and at too low a level for anybody to understand it if they don't know about the configuration format already. The text about setting up a remote is superfluous and doesn't help understand or recover from the error that has happened. Show the usage more prominently and explain how to set up the tracking information. If there is only one remote, that name is used instead of the generic <remote>. Also simplify the message we print on detached HEAD to remove unnecessary information which is better left for the documentation. Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-10Merge branch 'jc/parse-date-raw'Libravatar Junio C Hamano1-0/+23
* jc/parse-date-raw: parse_date(): '@' prefix forces git-timestamp parse_date(): allow ancient git-timestamp
2012-02-03parse_date(): '@' prefix forces git-timestampLibravatar Junio C Hamano1-0/+23
The only place that the issue this series addresses was observed where we read "cat-file commit" output and put it in GIT_AUTHOR_DATE in order to replay a commit with an ancient timestamp. With the previous patch alone, "git commit --date='20100917 +0900'" can be misinterpreted to mean an ancient timestamp, not September in year 2010. Guard this codepath by requring an extra '@' in front of the raw git timestamp on the parsing side. This of course needs to be compensated by updating get_author_ident_from_commit and the code for "git commit --amend" to prepend '@' to the string read from the existing commit in the GIT_AUTHOR_DATE environment variable. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-08test: fix '&&' chainingLibravatar Ramkumar Ramachandra1-2/+2
Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain by adding " &&" at the end of line to the commands that need them. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-10rebase: use @{upstream} if no upstream specifiedLibravatar Martin von Zweigbergk1-9/+18
'git rebase' without arguments is currently not supported. Make it default to 'git rebase @{upstream}'. That is also what 'git pull [--rebase]' defaults to, so it only makes sense that 'git rebase' defaults to the same thing. Defaulting to @{upstream} will make it possible to run e.g. 'git rebase -i' without arguments, which is probably a quite common use case. It also improves the scenario where you have multiple branches that rebase against a remote-tracking branch, where you currently have to choose between the extra network delay of 'git pull' or the slightly awkward keys to enter 'git rebase @{u}'. The error reporting when no upstream is configured for the current branch or when no branch is checked out is reused from git-pull.sh. A function is extracted into git-parse-remote.sh for this purpose. Helped-by: Yann Dirson <ydirson@altern.org> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-21Merge branch 'dg/local-mod-error-messages'Libravatar Junio C Hamano1-1/+2
* dg/local-mod-error-messages: t7609: test merge and checkout error messages unpack_trees: group error messages by type merge-recursive: distinguish "removed" and "overwritten" messages merge-recursive: porcelain messages for checkout Turn unpack_trees_options.msgs into an array + enum Conflicts: t/t3400-rebase.sh
2010-08-11unpack_trees: group error messages by typeLibravatar Matthieu Moy1-1/+2
When an error is encountered, it calls add_rejected_file() which either - directly displays the error message and stops if in plumbing mode (i.e. if show_all_errors is not initialized at 1) - or stores it so that it will be displayed at the end with display_error_msgs(), Storing the files by error type permits to have a list of files for which there is the same error instead of having a serie of almost identical errors. As each bind_overlap error combines a file and an old file, a list cannot be done, therefore, theses errors are not stored but directly displayed. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-23rebase: protect against diff.renames configurationLibravatar Junio C Hamano1-1/+23
We currently do not disable diff.renames configuration while rebase internally runs "format-patch" to feed "am -3". The end user configuration for "diff" should not affect the result produced by the higher level command that is related to "diff" only because internally it is implemented in terms of it. For that matter, I have a feeling that format-patch should not even look at diff.renames, but we seem to have been doing this for a long time so there is no easy way to fix this thinko. In any case, here is a much straightforward fix for "rebase". [jn: with test case from David] Reported-by: David D. Kilzer <ddkilzer@kilzer.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-23t3400 (rebase): whitespace cleanupLibravatar Jonathan Nieder1-90/+92
This test used 5-space indents since it was added in 2005, but recently the temptation to use tabs to indent has been too strong, resulting in uneven whitespace. Switch over completely to tabs. While at it, use a more modern style for consistency with other tests: - names of tests go on the same line as test_expect_success; - extra whitespace after > redirection operators is removed. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-27Merge branch 'js/maint-am-rebase-invalid-author'Libravatar Junio C Hamano1-2/+7
* js/maint-am-rebase-invalid-author: am: use get_author_ident_from_commit instead of mailinfo when rebasing
2010-06-16am: use get_author_ident_from_commit instead of mailinfo when rebasingLibravatar Jay Soffian1-2/+7
In certain situations, commit authorship can consist of an invalid e-mail address. For example, this is the case when working with git svn repos where the author email has had the svn repo UUID appended such as: author@example.com <author@example.com@deadbeef-dead-beef-dead-beefdeadbeef> Given such an address, mailinfo extracts the authorship incorrectly as it assumes a valid domain. However, when rebasing the original authorship should be preserved irrespective of its validity as an email address. Using get_author_ident_from_commit instead of mailinfo when rebasing preserves the original authorship. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-31rebase: improve error message when upstream argument is missingLibravatar Jonathan Nieder1-1/+12
Strip out options before checking for a missing upstream argument. Before: $ git rebase -m shift: 426: can't shift that many After: $ git rebase -m Usage: git rebase ... While at it, fix the usage message to explain that the upstream argument is mandatory. Reported-by: Jon Dowland <jmtd@debian.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-24Merge branch 'tr/notes-display'Libravatar Junio C Hamano1-0/+17
* tr/notes-display: git-notes(1): add a section about the meaning of history notes: track whether notes_trees were changed at all notes: add shorthand --ref to override GIT_NOTES_REF commit --amend: copy notes to the new commit rebase: support automatic notes copying notes: implement helpers needed for note copying during rewrite notes: implement 'git notes copy --stdin' rebase -i: invoke post-rewrite hook rebase: invoke post-rewrite hook commit --amend: invoke post-rewrite hook Documentation: document post-rewrite hook Support showing notes from more than one notes tree test-lib: unset GIT_NOTES_REF to stop it from influencing tests Conflicts: git-am.sh refs.c
2010-03-12rebase: support automatic notes copyingLibravatar Thomas Rast1-0/+17
Luckily, all the support already happens to be there. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-25tests: consolidate CR removal/addition functionsLibravatar Stephen Boyd1-4/+0
append_cr(), remove_cr(), q_to_nul() and q_to_cr() are defined in multiple tests. Consolidate them into test-lib.sh so we can stop redefining them. The use of remove_cr() in t0020 to test for a CR is replaced with a new function has_cr() to accurately reflect what is intended (the output of remove_cr() was being thrown away). Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-05Allow mailsplit (and hence git-am) to handle mails with CRLF line-endingsLibravatar Junio C Hamano1-2/+24
It is not that uncommon to have mails with DOS line-ending, notably Thunderbird and web mailers like Gmail (when saving what they call "original" message). So modify mailsplit to convert CRLF line-endings to just LF. Since git-rebase is built on top of git-am, add an option to mailsplit to be used by git-am when it is acting on behalf of git-rebase, to refrain from doing this conversion. And add a test to make sure that rebase still works. Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-18am, rebase: teach quiet optionLibravatar Stephen Boyd1-6/+13
git-am and git-rebase are talkative scripts. Teach them to be quiet when told, allowing them to speak only when they fail or experience errors. The quiet option is maintained when git-am or git-rebase fails to apply a patch. This means subsequent --resolved, --continue, --skip, --abort invocations will be quiet if the original invocation was quiet. Drop a handful of >&2 redirection; the rest of the program sends all the info messages to stdout, not to stderr. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-24t/t3400-rebase.sh: add more tests to help migrating git-rebase.sh to CLibravatar Nguyễn Thái Ngọc Duy1-0/+31
These new tests make sure I don't miss any check being performed before rebase is proceeded (which is well tested by other tests) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-19test-lib: Introduce test_chmod and use it instead of update-index --chmodLibravatar Johannes Sixt1-2/+2
This function replaces sequences of 'chmod +x' and 'git update-index --chmod=+x' in the test suite, whose purpose is to help filesystems that need core.filemode=false. Two places where only 'chmod +x' was used we also use this new function. The function calls 'git update-index --chmod' without checking core.filemode (unlike some of the call sites did). We do this because the call sites *expect* that the executable bit ends up in the index (ie. it is not the purpose of the call sites to *test* whether git treats 'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on filesystems with core.filemode=true the 'git update-index --chmod' is a no-op. The function uses --add with update-index to help one call site in t6031-merge-recursive. It makes no difference for the other callers. Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-01t3400-rebase: Move detached HEAD check earlierLibravatar Johannes Sixt1-4/+4
Short story: There is a section in t3400 that tests fundamental rebase properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09) added a check that rebase works on a detached HEAD, but the test was put near the end of the file. This moves it to a more suitable place. Long story: The test that preceded the one in question tests that a rebased commit degrades from a content change with mode change to a mere mode change. But on Windows, where we have core.filemode=false, the original commit did not record the mode change, and so the rebase operation did not rebase anything. This caused the subsequent detached HEAD test to fail. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-08Add two extra tests for git rebaseLibravatar Johannes Schindelin1-1/+12
2008-09-03tests: use "git xyzzy" form (t0000 - t3599)Libravatar Nanako Shiraishi1-3/+3
Converts tests between t0050-t3903. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-14Merge branch 'bd/tests'Libravatar Junio C Hamano1-1/+2
* bd/tests: Rename the test trash directory to contain spaces. Fix tests breaking when checkout path contains shell metacharacters Don't use the 'export NAME=value' in the test scripts. lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters test-lib.sh: Fix some missing path quoting Use test_set_editor in t9001-send-email.sh test-lib.sh: Add a test_set_editor function to safely set $VISUAL git-send-email.perl: Handle shell metacharacters in $EDITOR properly config.c: Escape backslashes in section names properly git-rebase.sh: Fix --merge --abort failures when path contains whitespace Conflicts: t/t9115-git-svn-dcommit-funky-renames.sh
2008-05-13fix bsd shell negationLibravatar Jeff King1-2/+2
On some shells (notably /bin/sh on FreeBSD 6.1), the construct foo && ! bar | baz is true if foo && baz whereas for most other shells (such as bash) is true if foo && ! baz We can work around this by specifying foo && ! (bar | baz) which works everywhere. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Don't use the 'export NAME=value' in the test scripts.Libravatar Bryan Donlan1-1/+2
This form is not portable across all shells, so replace instances of: export FOO=bar with: FOO=bar export FOO Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01Sane use of test_expect_failureLibravatar Junio C Hamano1-2/+2
Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-16apply --index-info: fall back to current index for mode changesLibravatar Johannes Schindelin1-0/+15
"git diff" does not record index lines for pure mode changes (i.e. no lines changed). Therefore, apply --index-info would call out a bogus error. Instead, fall back to reading the info from the current index. Incidentally, this fixes an error where git-rebase would not rebase a commit including a pure mode change, and changes requiring a threeway merge. Noticed and later tested by Chris Shoemaker. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-04Allow rebase to run if upstream is completely mergedLibravatar Johannes Sixt1-1/+38
Consider this history: o--o-...-B <- origin \ \ x--x--M--x--x <- master In this situation, rebase considers master fully up-to-date and would not do anything. However, if there were additional commits on origin, the rebase would run and move the commits x on top of origin. Here we change rebase to short-circuit out only if the history since origin is strictly linear. Consequently, the above as well as a history like this would be linearized: o--o <- origin \ x--x \ \ x--M--x--x <- master Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-3/+3
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2005-12-14git rebase loses author name/email if given bad email addressLibravatar Amos Waterland1-0/+34
If GIT_AUTHOR_EMAIL is of a certain form, `git rebase master' will blow away the author name and email when fast-forward merging commits. I have not tracked it down, but here is a testcase that demonstrates the behavior. Signed-off-by: Amos Waterland <apw@us.ibm.com> Acked-by: Michal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>