summaryrefslogtreecommitdiff
path: root/t/t3301-notes.sh
AgeCommit message (Collapse)AuthorFilesLines
2015-01-22Fix unclosed here document in t3301.shLibravatar Kacper Kornet1-1/+1
Commit 908a3203632a02568df230c0fccf9a2cd8da24e6 introduced indentation to here documents in t3301.sh. However in one place <<-EOF was missing -, which broke this test when run with mksh-50d. This commit fixes it. Signed-off-by: Kacper Kornet <draenog@pld-linux.org> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-14t3301: modernize styleLibravatar Johan Herland1-699/+601
Make this test script appear somewhat less old-fashioned: - Use test helper functions: - write_script - test_commit - test_write_lines - test_line_count - test_config - test_unconfig - test_path_is_missing - Remove whitespace between redirection operators and their targets. - Move preparation of "expect" files into tests. - Rename "output" files to "actual". - More consistent quoting, especially around commands that might expand to nothing. - More visibility of important whitespace with ${indent}. - Combine pairs of tests that unnecessarily split setup and verification. Improved-by: Eric Sunshine <sunshine@sunshineco.com> Improved-by: Junio C Hamano <gitster@pobox.com> Improved-by: Michael Blume <blume.mike@gmail.com> Improved-by: Jeff King <peff@peff.net> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-12notes: empty notes should be shown by 'git log'Libravatar Johan Herland1-0/+12
If the user has gone through the trouble of explicitly adding an empty note, then "git log" should not silently skip it (as if it didn't exist). Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-12builtin/notes: add --allow-empty, to allow storing empty notesLibravatar Johan Herland1-1/+9
Although the "git notes" man page advertises that we support binary-safe notes addition (using the -C option), we currently do not support adding the empty note (i.e. using the empty blob to annotate an object). Instead, an empty note is always treated as an intent to remove the note altogether. Introduce the --allow-empty option to the add/append/edit subcommands, to explicitly allow an empty note to be stored into the notes tree. Also update the documentation, and add test cases for the new option. Reported-by: James H. Fisher <jhf@trifork.com> Improved-by: Kyle J. McKay <mackyle@gmail.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-10t3301: verify that 'git notes' removes empty notes by defaultLibravatar Johan Herland1-0/+27
Add test cases documenting the current behavior when trying to add/append/edit empty notes. This is in preparation for adding --allow-empty; to allow empty notes to be stored. Improved-by: Eric Sunshine <sunshine@sunshineco.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-31Merge branch 'dt/tests-with-env-not-subshell'Libravatar Junio C Hamano1-16/+6
* dt/tests-with-env-not-subshell: tests: use "env" to run commands with temporary env-var settings
2014-03-19tests: use "env" to run commands with temporary env-var settingsLibravatar David Tran1-16/+6
Ordinarily, we would say "VAR=VAL command" to execute a tested command with environment variable(s) set only for that command. This however does not work if 'command' is a shell function (most notably 'test_must_fail'); the result of the assignment is retained and affects later commands. To avoid this, we used to assign and export environment variables and run such a test in a subshell, like so: ( VAR=VAL && export VAR && test_must_fail git command to be tested ) But with "env" utility, we should be able to say: test_must_fail env VAR=VAL git command to be tested which is much shorter and easier to read. Signed-off-by: David Tran <unsignedzero@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-20notes: disallow reusing non-blob as a note objectLibravatar Johan Herland1-0/+27
Currently "git notes add -C $object" will read the raw bytes from $object, and then copy those bytes into the note object, which is hardcoded to be of type blob. This means that if the given $object is a non-blob (e.g. tree or commit), the raw bytes from that object is copied into a blob object. This is probably not useful, and certainly not what any sane user would expect. So disallow it, by erroring out if the $object passed to the -C option is not a blob. The fix also applies to the -c option (in which the user is prompted to edit/verify the note contents in a text editor), and also when -c/-C is passed to "git notes append" (which appends the $object contents to an existing note object). In both cases, passing a non-blob $object does not make sense. Also add a couple of tests demonstrating expected behavior. Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-19notes remove: --stdin reads from the standard inputLibravatar Junio C Hamano1-0/+35
Teach the command to read object names to remove from the standard input, in addition to the object names given from the command line. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-19notes remove: --ignore-missingLibravatar Junio C Hamano1-0/+20
Depending on the application, it is not necessarily an error for an object to lack a note, especially if the only thing the caller wants to make sure is that notes are cleared for an object. By passing this option from the command line, the "git notes remove" command considers it a success if the object did not have any note to begin with. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-19notes remove: allow removing more than oneLibravatar Junio C Hamano1-0/+20
While "xargs -n1 git notes rm" is certainly a possible way to remove notes from many objects, this would create one notes "commit" per removal, which is not quite suitable for seasonal housekeeping. Allow taking more than one on the command line, and record their removal as a single atomic event if everthing goes well. Even though the old code insisted that "git notes rm" must be given only one object (or zero, in which case it would default to HEAD), this condition was not tested. Add tests to handle the new case where we feed multiple objects, and also make sure if there is a bad input, no change is recorded. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-02Merge branch 'jk/notes-ui-updates'Libravatar Junio C Hamano1-0/+38
* jk/notes-ui-updates: contrib/completion: --notes, --no-notes log/pretty-options: Document --[no-]notes and deprecate old notes options revision.c: make --no-notes reset --notes list revision.c: support --notes command-line option notes: refactor display notes default handling notes: refactor display notes extra refs field revision.c: refactor notes ref expansion notes: make expand_notes_ref globally accessible
2011-03-30Make "git notes add" more user-friendly when there are existing notesLibravatar Johan Herland1-2/+27
Currently, "notes add" (without -f/--force) will abort when the given object already has existing notes. This makes sense for the modes of "git notes add" that would necessarily overwrite the old message (when using the -m/-F/-C/-c options). However, when no options are given (meaning the notes are created from scratch in the editor) it is not very user-friendly to abort on existing notes, and forcing the user to run "git notes edit". Instead, it is better to simply "redirect" to "git notes edit" automatically, i.e. open the existing notes in the editor and let the user edit them. This patch does just that. This changes the behavior of "git notes add" without options when notes already exist for the given object, but I doubt that many users really depend on the previous failure from "git notes add" in this case. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-29revision.c: make --no-notes reset --notes listLibravatar Jeff King1-0/+16
With most command line options, later instances of an option override earlier ones. With cumulative options like "--notes", however, there is no way to say "forget the --notes I gave you before". Let's have --no-notes trigger this forgetting, so that: git log --notes=foo --no-notes --notes=bar will show only the "bar" notes. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-29revision.c: support --notes command-line optionLibravatar Jeff King1-0/+22
We already have --show-notes, but it has a few shortcomings: 1. Using --show-notes=<ref> implies that we should also show the default notes. Which means you also need to use --no-standard-notes if you want to suppress them. 2. It is negated by --no-notes, which doesn't match. 3. It's too long to type. :) This patch introduces --notes, which behaves exactly like --show-notes, except that using "--notes=<ref>" does not imply showing the default notes. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-06t0001,t1510,t3301: use sane_unset which always returns with status 0Libravatar Brandon Casey1-1/+1
On some shells (like /usr/xpg4/bin/sh on Solaris), unset will exit non-zero when passed the name of a variable that has not been set. Use sane_unset instead so that the return value of unset can be ignored while the && linkage of the test script can be preserved. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-08Merge branch 'jh/notes-merge'Libravatar Junio C Hamano1-0/+23
* jh/notes-merge: (23 commits) Provide 'git merge --abort' as a synonym to 'git reset --merge' cmd_merge(): Parse options before checking MERGE_HEAD Provide 'git notes get-ref' to easily retrieve current notes ref git notes merge: Add testcases for merging notes trees at different fanouts git notes merge: Add another auto-resolving strategy: "cat_sort_uniq" git notes merge: --commit should fail if underlying notes ref has moved git notes merge: List conflicting notes in notes merge commit message git notes merge: Manual conflict resolution, part 2/2 git notes merge: Manual conflict resolution, part 1/2 Documentation: Preliminary docs on 'git notes merge' git notes merge: Add automatic conflict resolvers (ours, theirs, union) git notes merge: Handle real, non-conflicting notes merges builtin/notes.c: Refactor creation of notes commits. git notes merge: Initial implementation handling trivial merges only builtin/notes.c: Split notes ref DWIMmery into a separate function notes.c: Use two newlines (instead of one) when concatenating notes (trivial) t3303: Indent with tabs instead of spaces for consistency notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond notes.h/c: Allow combine_notes functions to remove notes notes.c: Reorder functions in preparation for next commit ... Conflicts: builtin.h
2010-11-17Provide 'git notes get-ref' to easily retrieve current notes refLibravatar Johan Herland1-0/+19
Script may use 'git notes get-ref' to easily retrieve the current notes ref. Suggested-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-17notes.c: Use two newlines (instead of one) when concatenating notesLibravatar Johan Herland1-0/+4
When using combine_notes_concatenate() to concatenate notes, it currently ensures exactly one newline character between the given notes. However, when using builtin/notes.c:create_note() to concatenate notes (e.g. by 'git notes append'), it adds a newline character to the trailing newline of the preceding notes object, thus resulting in _two_ newlines (aka. a blank line) separating contents of the two notes. This patch brings combine_notes_concatenate() into consistency with builtin/notes.c:create_note(), by ensuring exactly _two_ newline characters between concatenated notes. The patch also changes a few notes-related selftests accordingly. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09t3301 (notes): use test_expect_code for clarityLibravatar Jonathan Nieder1-1/+1
Use the test_expect_code helper instead of open-coding it. The main behavior change is to print the command and actual exit status when the test fails. More importantly, this would make it easier to add commands before "git notes show" as part of the same test assertion if needed. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09tests: add missing &&, batch 2Libravatar Jonathan Nieder1-3/+3
Same rules as before: this patch only adds " &&" to the end of some lines in the test suite. Intended to be applied on top of or squashed with the last batch if they look okay. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31notes: Don't create (empty) commit when removing non-existing notesLibravatar Johan Herland1-0/+7
Extend remove_note() in the notes API to return whether or not a note was actually removed. Use this in 'git notes remove' to skip the creation of a notes commit when no notes were actually removed. Also add a test illustrating the change in behavior. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-18Merge branch 'jh/use-test-must-fail'Libravatar Junio C Hamano1-3/+3
* jh/use-test-must-fail: Convert "! git" to "test_must_fail git"
2010-07-21t/: work around one-shot variable assignment with test_must_failLibravatar Brandon Casey1-1/+5
See e2007832552ccea9befed9003580c494f09e666e Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-20Convert "! git" to "test_must_fail git"Libravatar Jared Hance1-3/+3
test_must_fail will account for segfaults in git, so it should be used instead of "! git" This patch does not change any of the commands that use pipes. Signed-off-by: Jared Hance <jaredhance@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-28notes: check number of parameters to "git notes copy"Libravatar Jeff King1-0/+6
Otherwise we may segfault with too few parameters. Signed-off-by: Jeff King <peff@peff.net> Tested-by: Bert Wesarg <Bert.Wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-18t3301: add tests to use --format="%N"Libravatar Junio C Hamano1-0/+18
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-29refs.c: Write reflogs for notes just like for branch headsLibravatar Michael J Gruber1-1/+1
The notes code intends to write reflog entries, but currently they are not written because log_ref_write() checks for the refname path explicitly. Add refs/notes to the list of allowed paths so that notes references are treated just like branch heads, i.e. according to core.logAllRefUpdates and core.bare. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-29t3301-notes: Test the creation of reflog entriesLibravatar Michael J Gruber1-0/+9
Test whether the notes code writes reflog entries. It intends to (setting up the reflog messages) but currently does not. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-28Merge branch 'sb/notes-parse-opt'Libravatar Junio C Hamano1-0/+11
* sb/notes-parse-opt: notes: rework subcommands and parse options Conflicts: builtin/notes.c
2010-03-24Merge branch 'tr/notes-display'Libravatar Junio C Hamano1-8/+369
* tr/notes-display: git-notes(1): add a section about the meaning of history notes: track whether notes_trees were changed at all notes: add shorthand --ref to override GIT_NOTES_REF commit --amend: copy notes to the new commit rebase: support automatic notes copying notes: implement helpers needed for note copying during rewrite notes: implement 'git notes copy --stdin' rebase -i: invoke post-rewrite hook rebase: invoke post-rewrite hook commit --amend: invoke post-rewrite hook Documentation: document post-rewrite hook Support showing notes from more than one notes tree test-lib: unset GIT_NOTES_REF to stop it from influencing tests Conflicts: git-am.sh refs.c
2010-03-15Merge branch 'jh/notes'Libravatar Junio C Hamano1-36/+474
* jh/notes: (33 commits) Documentation: fix a few typos in git-notes.txt notes: fix malformed tree entry builtin-notes: Minor (mostly parse_options-related) fixes builtin-notes: Add "copy" subcommand for copying notes between objects builtin-notes: Misc. refactoring of argc and exit value handling builtin-notes: Add -c/-C options for reusing notes builtin-notes: Refactor handling of -F option to allow combining -m and -F builtin-notes: Deprecate the -m/-F options for "git notes edit" builtin-notes: Add "append" subcommand for appending to note objects builtin-notes: Add "add" subcommand for adding notes to objects builtin-notes: Add --message/--file aliases for -m/-F options builtin-notes: Add "list" subcommand for listing note objects Documentation: Generalize git-notes docs to 'objects' instead of 'commits' builtin-notes: Add "prune" subcommand for removing notes for missing objects Notes API: prune_notes(): Prune notes that belong to non-existing objects t3305: Verify that removing notes triggers automatic fanout consolidation builtin-notes: Add "remove" subcommand for removing existing notes Teach builtin-notes to remove empty notes Teach notes code to properly preserve non-notes in the notes tree t3305: Verify that adding many notes with git-notes triggers increased fanout ... Conflicts: Makefile
2010-03-12notes: rework subcommands and parse optionsLibravatar Stephen Boyd1-0/+11
Running 'git notes copy -h' is not very helfpul right now. It lists the options for all the git notes subcommands and is rather confusing. Fix this by splitting cmd_notes() into separate functions for each subcommand (besides append and edit since they're very similar) and only providing a usage message for the subcommand. This has an added benefit of reducing the code complexity while making it safer and easier to read. The downside is we get some code bloat from similar setup and teardown needed for notes and options parsing. We also get a bit stricter in options parsing by only allowing the ref option to come before the subcommand. Acked-by: Johan Herland <johan@herland.net> Cc: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-12notes: implement helpers needed for note copying during rewriteLibravatar Thomas Rast1-0/+195
Implement helper functions to load the rewriting config, and to actually copy the notes. Also document the config. Secondly, also implement an undocumented --for-rewrite=<cmd> option to 'git notes copy' which is used like --stdin, but also puts the configuration for <cmd> into effect. It will be needed to support the copying in git-rebase. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-12notes: implement 'git notes copy --stdin'Libravatar Thomas Rast1-0/+34
This implements a mass-copy command that takes a sequence of lines in the format <from-sha1> SP <to-sha1> [ SP <rest> ] LF on stdin, and copies each <from-sha1>'s notes to the <to-sha1>. The <rest> is ignored. The intent, of course, is that this can read the same input that the 'post-rewrite' hook gets. The copy_note() function is exposed for everyone's and in particular the next commit's use. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-12Support showing notes from more than one notes treeLibravatar Thomas Rast1-8/+140
With this patch, you can set notes.displayRef to a glob that points at your favourite notes refs, e.g., [notes] displayRef = refs/notes/* Then git-log and friends will show notes from all trees. Thanks to Junio C Hamano for lots of feedback, which greatly influenced the design of the entire series and this commit in particular. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-25t3301-notes: insert a shbang line in ./fake_editor.shLibravatar Johannes Sixt1-0/+1
This is required on Windows because git-notes is now a built-in rather than a shell script. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13builtin-notes: Add "copy" subcommand for copying notes between objectsLibravatar Johan Herland1-0/+63
This is useful for keeping notes to objects that are being rewritten by e.g. 'git commit --amend', 'git rebase', or 'git cherry-pick'. "git notes copy <from> <to>" is in practice equivalent to "git notes add -C $(git notes list <from>) <to>", although it is somewhat more convenient for regular users. "git notes copy" takes the same -f option as "git add", to overwrite existing notes at the target (instead of aborting with an error message). If the <from>-object has no notes, "git notes copy" will abort with an error message. The patch includes tests verifying correct behaviour of the new subcommand. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13builtin-notes: Add -c/-C options for reusing notesLibravatar Johan Herland1-0/+116
Inspired by the -c/-C options to "git commit", we teach these options to "git notes add/append" to allow reuse of note objects. With this patch in place, it is now easy to copy or move notes between objects. For example, to copy object A's notes to object B: git notes add [-f] -C $(git notes list A) B To move instead of copying, you simply remove the notes from the source object afterwards, e.g.: git notes remove A The patch includes tests verifying correct behaviour of the new functionality. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13builtin-notes: Refactor handling of -F option to allow combining -m and -FLibravatar Johan Herland1-1/+22
By moving the -F option handling into a separate function (parse_file_arg), we can start allowing several -F options, and mixed usage of -m and -F options. Each -m/-F given appends to the note message, in the order they are given on the command-line. The patch includes tests verifying correct behaviour of the new functionality. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13builtin-notes: Add "append" subcommand for appending to note objectsLibravatar Johan Herland1-0/+36
"git notes append" is equivalent to "git notes edit" except that instead of editing existing notes contents, you can only append to it. This is useful for quickly adding annotations like e.g.: git notes append -m "Acked-by: A U Thor <author@example.com>" "git notes append" takes the same -m/-F options as "git notes add". If there is no existing note to append to, "git notes append" is identical to "git notes add" (i.e. it adds a new note). The patch includes tests verifying correct behaviour of the new subcommand. Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13builtin-notes: Add "add" subcommand for adding notes to objectsLibravatar Johan Herland1-18/+37
"git notes add" is identical to "git notes edit" except that instead of editing existing notes for a given object, you can only add notes to an object that currently has none. If "git notes add" finds existing notes for the given object, the addition is aborted. However, if the new -f/--force option is used, "git notes add" will _overwrite_ the existing notes with the new notes contents. If there is no existing notes for the given object. "git notes add" is identical to "git notes edit" (i.e. it adds a new note). The patch includes tests verifying correct behaviour of the new subcommand. Suggested-by: Joey Hess <joey@kitenet.net> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13builtin-notes: Add "list" subcommand for listing note objectsLibravatar Johan Herland1-0/+32
"git notes list" will list all note objects in the current notes ref (in the format "<note object> <annotated object>"). "git notes list <object>" will list the note object associated with the given <object>, or fail loudly if the given <object> has no associated notes. If no arguments are given to "git notes", it defaults to the "list" subcommand. This is for pseudo-compatibility with "git tag" and "git branch". The patch includes tests verifying correct behaviour of the new subcommand. Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13builtin-notes: Add "remove" subcommand for removing existing notesLibravatar Johan Herland1-0/+27
Using "git notes remove" is equivalent to specifying an empty note message. The patch includes tests verifying correct behaviour of the new subcommand. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13Teach builtin-notes to remove empty notesLibravatar Johan Herland1-0/+31
When the result of editing a note is an empty string, the associated note entry should be deleted from the notes tree. This allows deleting notes by invoking either "git notes -m ''" or "git notes -F /dev/null". Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13t3301: Verify successful annotation of non-commitsLibravatar Johan Herland1-0/+17
Adds a testcase verifying that git-notes works successfully on tree, blob, and tag objects. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13Builtin-ify git-notesLibravatar Johan Herland1-35/+63
The builtin-ification includes some minor behavioural changes to the command-line interface: It is no longer allowed to mix the -m and -F arguments, and it is not allowed to use multiple -F options. As part of the builtin-ification, we add the commit_notes() function to the builtin API. This function (together with the notes.h API) can be easily used from other builtins to manipulate the notes tree. Also includes needed changes to t3301. This patch has been improved by the following contributions: - Stephen Boyd: Use die() instead of fprintf(stderr, ...) followed by exit(1) Cc: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-13Add tests for checking correct handling of $GIT_NOTES_REF and core.notesRefLibravatar Johan Herland1-0/+48
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-21Fix "log --oneline" not to show notesLibravatar Junio C Hamano1-2/+4
This option should be treated pretty much the same as --format="%h %s". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Fix "log" family not to be too agressive about showing notesLibravatar Junio C Hamano1-0/+57
Giving "Notes" information in the default output format of "log" and "show" is a sensible progress (the user has asked for it by having the notes), but for some commands (e.g. "format-patch") spewing notes into the formatted commit log message without being asked is too aggressive. Enable notes output only for "log", "show", "whatchanged" by default and only when the user didn't ask any specific --pretty/--format from the command line; users can explicitly override this default with --show-notes and --no-notes option. Parts of tests are taken from Jeff King's fix. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>