| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When "git worktree" feature is in use, "git branch -m" renamed a
branch that is checked out in another worktree without adjusting
the HEAD symbolic ref for the worktree.
* ky/branch-m-worktree:
set_worktree_head_symref(): fix error message
branch -m: update all per-worktree HEADs
refs: add a new function set_worktree_head_symref
|
|
When renaming a branch, currently only the HEAD of current working tree
is updated, but it must update HEADs of all working trees which point at
the old branch.
This is the current behavior, /path/to/wt's HEAD is not updated:
% git worktree list
/path/to 2c3c5f2 [master]
/path/to/wt 2c3c5f2 [oldname]
% git branch -m master master2
% git worktree list
/path/to 2c3c5f2 [master2]
/path/to/wt 2c3c5f2 [oldname]
% git branch -m oldname newname
% git worktree list
/path/to 2c3c5f2 [master2]
/path/to/wt 0000000 [oldname]
This patch fixes this issue by updating all relevant worktree HEADs
when renaming a branch.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a branch is checked out by current working tree, deleting the
branch is forbidden. However when the branch is checked out only by
other working trees, deleting incorrectly succeeds.
Use find_shared_symref() to check if the branch is in use, not just
comparing with the current working tree's HEAD.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we try to unset upstream configurations we do not check
return codes for the `git_config_set` functions. As those may
indicate that we were unable to unset the respective
configuration we may exit successfully without any error message
while in fact the upstream configuration was not unset.
Fix this by dying with an error message when we cannot unset the
configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When setting up a new tracking branch fails due to issues with
the configuration file we do not report any errors to the user
and pretend setting the tracking branch succeeded.
Setting up the tracking branch is handled by the
`install_branch_config` function. We do not want to simply die
there as the function is not only invoked when explicitly setting
upstream information with `git branch --set-upstream-to=`, but
also by `git push --set-upstream` and `git clone`. While it is
reasonable to die in the explict first case, we would lose
information in the latter two cases, so we only print the error
message but continue the program as usual.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Alternate refs backends might store reflogs somewhere other than
.git/logs. Change most test code that directly accesses .git/logs to
instead use git reflog commands.
There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch -d" (delete) and "git branch -m" (move) learned to
honor "-f" (force) flag; unlike many other subcommands, the way to
force these have been with separate "-D/-M" options, which was
inconsistent.
* mg/branch-d-m-f:
branch: allow -f with -m and -d
t3200-branch: test -M
|
|
-f/--force is the standard way to force an action, and is used by branch
for the recreation of existing branches, but not for deleting unmerged
branches nor for renaming to an existing branch.
Make "-m -f" equivalent to "-M" and "-d -f" equivalent to" -D", i.e.
allow -f/--force to be used with -m/-d also.
For the list modes, "-f" is simply ignored.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a repository gets in a broken state with too much symref nesting,
it cannot be repaired with "git branch -d":
$ git symbolic-ref refs/heads/nonsense refs/heads/nonsense
$ git branch -d nonsense
error: branch 'nonsense' not found.
Worse, "git update-ref --no-deref -d" doesn't work for such repairs
either:
$ git update-ref -d refs/heads/nonsense
error: unable to resolve reference refs/heads/nonsense: Too many levels of symbolic links
Fix both by teaching resolve_ref_unsafe a new RESOLVE_REF_NO_RECURSE
flag and passing it when appropriate.
Callers can still read the value of a symref (for example to print a
message about it) with that flag set --- resolve_ref_unsafe will
resolve one level of symrefs and stop there.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dt/tests-with-env-not-subshell:
tests: use "env" to run commands with temporary env-var settings
|
|
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No test asserts that "git branch -u refs/heads/my-branch my-branch"
avoids leaving nonsense configuration and emits a warning.
Add a test that does so.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/test-help-format-windows-port-fix:
t3200: do not open a HTML manual page when DEFAULT_MAN_FORMAT is html
|
|
We have the build configuration option DEFAULT_MAN_FORMAT to choose a
format different from man pages to be used by 'git help' when no format
is requested explicitly. Since 65db0443 (Set the default help format to
html for msys builds, 2013-06-04) we use html on Windows by default.
There is one test in t3200-branch.sh that invokes a help page. The
intent of the redirections applied to the command invocation is to avoid
that the man page viewer interferes with the automated test. But when
the default format is not "man", this does not have the intended effect,
and the HTML manual page is opened during the test run. Request "man"
format explicitly to keep the test silent.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a minor regression in v1.8.3.2 and later that made it
impossible to base your local work on anything but a local branch
of the upstream repository you are tracking from.
* jh/checkout-auto-tracking:
t3200: fix failure on case-insensitive filesystems
branch.c: Relax unnecessary requirement on upstream's remote ref name
t3200: Add test demonstrating minor regression in 41c21f2
Refer to branch.<name>.remote/merge when documenting --track
t3200: Minor fix when preparing for tracking failure
t2024: Fix &&-chaining and a couple of typos
|
|
62d94a3a (t3200: Add test demonstrating minor regression in 41c21f2;
2013-09-08) introduced a test which creates a directory named 'a',
however, on case-insensitive filesystems, this action fails with a
"fatal: cannot mkdir a: File exists" error due to a file named 'A' left
over from earlier tests. Resolve this problem.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating an upstream relationship, we use the configured remotes and
their refspecs to determine the upstream configuration settings
branch.<name>.remote and branch.<name>.merge. However, if the matching
refspec does not have refs/heads/<something> on the remote side, we end
up rejecting the match, and failing the upstream configuration.
It could be argued that when we set up an branch's upstream, we want that
upstream to also be a proper branch in the remote repo. Although this is
typically the common case, there are cases (as demonstrated by the previous
patch in this series) where this requirement prevents a useful upstream
relationship from being formed. Furthermore:
- We have fundamentally no say in how the remote repo have organized its
branches. The remote repo may put branches (or branch-like constructs
that are insteresting for downstreams to track) outside refs/heads/*.
- The user may intentionally want to track a non-branch from a remote
repo, by using a branch and configured upstream in the local repo.
Relaxing the checking to only require a matching remote/refspec allows the
testcase introduced in the previous patch to succeed, and has no negative
effect on the rest of the test suite.
This patch fixes a behavior (arguably a regression) first introduced in
41c21f2 (branch.c: Validate tracking branches with refspecs instead of
refs/remotes/*) on 2013-04-21 (released in >= v1.8.3.2).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 41c21f2 (branch.c: Validate tracking branches with refspecs instead of
refs/remotes/*), we changed the rules for what is considered a valid tracking
branch (a.k.a. upstream branch). We now use the configured remotes and their
refspecs to determine whether a proposed tracking branch is in fact within
the domain of a remote, and we then use that information to deduce the
upstream configuration (branch.<name>.remote and branch.<name>.merge).
However, with that change, we also check that - in addition to a matching
refspec - the result of mapping the tracking branch through that refspec
(i.e. the corresponding ref name in the remote repo) happens to start with
"refs/heads/". In other words, we require that a tracking branch refers to
a _branch_ in the remote repo.
Now, consider that you are e.g. setting up an automated building/testing
infrastructure for a group of similar "source" repositories. The build/test
infrastructure consists of a central scheduler, and a number of build/test
"slave" machines that perform the actual build/test work. The scheduler
monitors the group of similar repos for changes (e.g. with a periodic
"git fetch"), and triggers builds/tests to be run on one or more slaves.
Graphically the changes flow between the repos like this:
Source #1 -------v ----> Slave #1
/
Source #2 -----> Scheduler -----> Slave #2
\
Source #3 -------^ ----> Slave #3
... ...
The scheduler maintains a single Git repo with each of the source repos set
up as distinct remotes. The slaves also need access to all the changes from
all of the source repos, so they pull from the scheduler repo, but using the
following custom refspec:
remote.origin.fetch = "+refs/remotes/*:refs/remotes/*"
This makes all of the scheduler's remote-tracking branches automatically
available as identical remote-tracking branches in each of the slaves.
Now, consider what happens if a slave tries to create a local branch with
one of the remote-tracking branches as upstream:
git branch local_branch --track refs/remotes/source-1/some_branch
Git now looks at the configured remotes (in this case there is only "origin",
pointing to the scheduler's repo) and sees refs/remotes/source-1/some_branch
matching origin's refspec. Mapping through that refspec we find that the
corresponding remote ref name is "refs/remotes/source-1/some_branch".
However, since this remote ref name does not start with "refs/heads/", we
discard it as a suitable upstream, and the whole command fails.
This patch adds a testcase demonstrating this failure by creating two
source repos ("a" and "b") that are forwarded through a scheduler ("c")
to a slave repo ("d"), that then tries create a local branch with an
upstream. See the next patch in this series for the exciting conclusion
to this story...
Reported-by: Per Cederqvist <cederp@opera.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're testing that trying to --track a ref that is not covered by any remote
refspec should fail. For that, we want to have refs/remotes/local/master
present, but we also want the remote.local.fetch refspec to NOT match
refs/remotes/local/master (so that the tracking setup will fail, as intended).
However, when doing "git fetch local" to ensure the existence of
refs/remotes/local/master, we must not already have changed remote.local.fetch
so as to cause refs/remotes/local/master not to be fetched. Therefore, set
remote.local.fetch to refs/heads/*:refs/remotes/local/* BEFORE we fetch, and
then reset it to refs/heads/s:refs/remotes/local/s AFTER we have fetched
(but before we test --track).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current code for validating tracking branches (e.g. the argument to
the -t/--track option) hardcodes refs/heads/* and refs/remotes/* as the
potential locations for tracking branches. This works with the refspecs
created by "git clone" or "git remote add", but is suboptimal in other
cases:
- If "refs/remotes/foo/bar" exists without any association to a remote
(i.e. there is no remote named "foo", or no remote with a refspec
that matches "refs/remotes/foo/bar"), then it is impossible to set up
a valid upstream config that tracks it. Currently, the code defaults
to using "refs/remotes/foo/bar" from repo "." as the upstream, which
works, but is probably not what the user had in mind when running
"git branch baz --track foo/bar".
- If the user has tweaked the fetch refspec for a remote to put its
remote-tracking branches outside of refs/remotes/*, e.g. by running
git config remote.foo.fetch "+refs/heads/*:refs/foo_stuff/*"
then the current code will refuse to use its remote-tracking branches
as --track arguments, since they do not match refs/remotes/*.
This patch removes the "refs/remotes/*" requirement for upstream branches,
and replaces it with explicit checking of the refspecs for each remote to
determine whether a given --track argument is a valid remote-tracking
branch. This solves both of the above problems, since the matching refspec
guarantees that there is a both a remote name and a remote branch name
that can be used for the upstream config.
However, this means that refs located within refs/remotes/* without a
corresponding remote/refspec will no longer be usable as upstreams.
The few existing tests which depended on this behavioral quirk has
already been fixed in the preceding patches.
This patch fixes the last remaining test failure in t2024-checkout-dwim.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
This patch encodes the new expected behavior of this test, and marks the
test with "test_expect_failure" in anticipation of a following patch to
introduce the new behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The handing by "git branch --set-upstream-to" against various forms
of errorneous inputs were suboptimal.
* jk/set-upstream-error-cases:
branch: give advice when tracking start-point is missing
branch: mention start_name in set-upstream error messages
branch: improve error message for missing --set-upstream-to ref
branch: factor out "upstream is not a branch" error messages
t3200: test --set-upstream-to with bogus refs
|
|
"git branch -m" without any argument noticed an error, but with an
incorrect error message.
* jm/branch-rename-nothing-error:
branch: give better message when no names specified for rename
|
|
These tests pass with the current code, but let's make sure
we don't accidentally break the behavior in the future.
Note that our tests expect failure when we try to set the
upstream to or from a missing branch. Technically we are
just munging config here, so we do not need the refs to
exist. But seeing that they do exist is a good check that
the user has not made a typo.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Churns.
* rr/test-3200-style:
t3200 (branch): modernize style
|
|
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Style is inconsistent throughout the file. Make the following
changes:
1. Indent everything with tabs.
2. Put the opening quote (') for the test in the same line as
test_expect_success, and the closing quote on a line by itself.
3. Do not add extra space between redirection operator and filename,
i.e. "cmd >dst", not "cmd > dst".
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
branch_get() can return NULL (so far on detached HEAD only) but some
code paths in builtin/branch.c cannot deal with that and cause
segfaults.
While at there, make sure to bail out when the user gives 2 or more
branches with --set-upstream-to or --unset-upstream, where only the
first branch is processed and the rest silently dropped.
Reported-by: Per Cederqvist <cederp@opera.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git branch reports the abbreviated hash of the head commit of
a deleted branch to make it easier for a user to undo the
operation. For symref branches this doesn't help. Print the
symref target instead for them.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before a branch is deleted, we check that it points to a valid
commit. With -d we also check that the commit is a merged; this
check is not done with -D.
The reason for that is that commits pointed to by branches should
never go missing; if they do then something broke and it's better
to stop instead of adding to the mess. And a non-merged commit
may contain changes that are worth preserving, so we require the
stronger option -D instead of -d to get rid of them.
If a branch consists of a symref, these concerns don't apply.
Deleting such a branch can't make a commit become unreferenced,
so we don't need to check if it is merged, or even if it is
actually a valid commit. Skip them in that case. This allows
us to delete dangling symref branches.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a branch that is to be deleted happens to be a symref to another
branch, the current code removes the targeted branch instead of the
one it was called for.
Change this surprising behaviour and delete the symref branch
instead.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch --set-upstream origin/master" is a common mistake to
create a local branch 'origin/master' and set it to integrate with
the current branch. With a plan to deprecate this option, introduce
"git branch (-u|--set-upstream-to) origin/master" that sets the
current branch to integrate with 'origin/master' remote tracking
branch.
* cn/branch-set-upstream-to:
branch: deprecate --set-upstream and show help if we detect possible mistaken use
branch: add --unset-upstream option
branch: introduce --set-upstream-to
|
|
mistaken use
This interface is error prone, and a better one (--set-upstream-to)
exists. Add a message listing the alternatives and suggest how to fix
a --set-upstream invocation in case the user only gives one argument
which causes a local branch with the same name as a remote-tracking
one to be created. The typical case is
git branch --set-upstream origin/master
when the user meant
git branch --set-upstream master origin/master
assuming that the current branch is master. Show a message telling the
user how to undo their action and get what they wanted. For the
command above, the message would be
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
If you wanted to make 'master' track 'origin/master', do this:
git branch -d origin/master
git branch --set-upstream-to origin/master
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have ways of setting the upstream information, but if we want to
unset it, we need to resort to modifying the configuration manually.
Teach branch an --unset-upstream option that unsets this information.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the i18n-specific test functions in test scripts for parseopt tests.
This issue was was introduced in v1.7.10.1-488-g54e6d:
54e6d i18n: parseopt: lookup help and argument translations when showing usage
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing --set-uptream option can cause confusion, as it uses the
usual branch convention of assuming a starting point of HEAD if none
is specified, causing
git branch --set-upstream origin/master
to create a new local branch 'origin/master' that tracks the current
branch. As --set-upstream already exists, we can't simply change its
behaviour. To work around this, introduce --set-upstream-to which
accepts a compulsory argument indicating what the new upstream branch
should be and one optinal argument indicating which branch to change,
defaulting to HEAD.
The new options allows us to type
git branch --set-upstream-to origin/master
to set the current branch's upstream to be origin's master.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cn/maint-branch-with-bad:
branch: don't assume the merge filter ref exists
Conflicts:
t/t3200-branch.sh
|
|
print_ref_list looks up the merge_filter_ref and assumes that a valid
pointer is returned. When the object doesn't exist, it tries to
dereference a NULL pointer. This can be the case when git branch
--merged is given an argument that isn't a valid commit name.
Check whether the lookup returns a NULL pointer and die with an error
if it does. Add a test, while we're at it.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is very easy to mistype the branch name when editing its description,
e.g.
$ git checkout -b my-topic master
: work work work
: now we are at a good point to switch working something else
$ git checkout master
: ah, let's write it down before we forget what we were doing
$ git branch --edit-description my-tpoic
The command does not notice that branch 'my-tpoic' does not exist. It is
not lost (it becomes description of an unborn my-tpoic branch), but is not
very useful. So detect such a case and error out to reduce the grief
factor from this common mistake.
This incidentally also errors out --edit-description when the HEAD points
at an unborn branch (immediately after "init", or "checkout --orphan"),
because at that point, you do not even have any commit that is part of
your history and there is no point in describing how this particular
branch is different from the branch it forked off of, which is the useful
bit of information the branch description is designed to capture.
We may want to special case the unborn case later, but that is outside the
scope of this patch to prevent more common mistakes before 1.7.9 series
gains too much widespread use.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/test-chaining:
t3401: use test_commit in setup
t3401: modernize style
t3040 (subprojects-basic): fix '&&' chaining, modernize style
t1510 (worktree): fix '&&' chaining
t3030 (merge-recursive): use test_expect_code
test: fix '&&' chaining
t3200 (branch): fix '&&' chaining
|
|
Breaks in a test assertion's && chain can potentially hide failures
from earlier commands in the chain. Fix these breaks.
The 'git branch --help' in the test may fail if git manual pages are
not installed, but the point of the test is to make sure it does not
create a bogus branch "--help", so run it under 'test_might_fail'.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Overwriting the current branch with a different commit is forbidden, as it
will make the status recorded in the index and the working tree out of
sync with respect to the HEAD. There however is no reason to forbid it if
the current branch is renamed to itself, which admittedly is something
only an insane user would do, but is handy for scripts.
Test script is by Conrad Irwin.
Reported-by: Soeren Sonnenburg <sonne@debian.org>
Reported-by: Josh Chia (谢任中)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Kazuki Yamaguchi
Patrick Steinhardt
David Turner
Michael J Gruber
Jonathan Nieder
David Tran
Brian Gesiak
Johannes Sixt
Eric Sunshine
Per Cederqvist
Johan Herland
Felipe Contreras
Jeff King
Jonathon Mah
Ramkumar Ramachandra
Nguyễn Thái Ngọc Duy
René Scharfe
Carlos Martín Nieto
Jiang Xin
Stefan Naewe