| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* bc/maint-1.6.1-branch-deleted-was:
git-branch: display "was sha1" on branch deletion rather than just "sha1"
Conflicts:
builtin-branch.c
|
|
Many tests depend on that symbolic links work. This introduces a check
that sets the prerequisite tag SYMLINKS if the file system supports
symbolic links. Since so many tests have to check for this prerequisite,
we do the check in test-lib.sh, so that we don't need to repeat the test
in many scripts.
To check for 'ln -s' failures, you can use a FAT partition on Linux:
$ mkdosfs -C git-on-fat 1000000
$ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt
Clone git to /mnt and
$ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7
t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \
make test
(These additionally skipped tests depend on POSIX permissions that FAT on
Linux does not provide.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Make it more pleasant to read about a branch deletion by adding "was".
Jeff King suggested this, and I ignored it. He was right.
Update t3200 test again to match the change in output.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it easier to recover from a mistaken branch deletion by displaying the
sha1 of the branch's tip commit.
Update t3200 test to match the change in output.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There may be cases where one would really want to rename the symbolic
ref without changing its value, but "git branch -m" is not such a
use-case.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This had two problems with symrefs. First, it copied the actual sha1
instead of the "pointer", second it failed to remove the old ref after a
successful rename.
Given that till now delete_ref() always dereferenced symrefs, a new
parameters has been introduced to delete_ref() to allow deleting refs
without a dereference.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Converts tests between t0050-t3903.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change cd67e4d4 introduced a new configuration parameter that told
pull to automatically perform a rebase instead of a merge. This
change provides a configuration option to enable this feature
automatically when creating a new branch.
If the variable branch.autosetuprebase applies for a branch that's
being created, that branch will have branch.<name>.rebase set to true.
Signed-off-by: Dustin Sallings <dustin@spy.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git-config name = value" doesn't do anything most of the time. The
test meant "git-config name value", but that leaves the configuration
such that later tests will be confused, so move it to the end.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/branch-track:
doc: documentation update for the branch track changes
branch: optionally setup branch.*.merge from upstream local branches
Conflicts:
Documentation/config.txt
Documentation/git-branch.txt
Documentation/git-checkout.txt
builtin-branch.c
cache.h
t/t7201-co.sh
|
|
"git branch" and "git checkout -b" now honor --track option even when
the upstream branch is local. Previously --track was silently ignored
when forking from a local branch. Also the command did not error out
when --track was explicitly asked for but the forked point specified
was not an existing branch (i.e. when there is no way to set up the
tracking configuration), but now it correctly does.
The configuration setting branch.autosetupmerge can now be set to
"always", which is equivalent to using --track from the command line.
Setting branch.autosetupmerge to "true" will retain the former behavior
of only setting up branch.*.merge for remote upstream branches.
Includes test cases for the new functionality.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch cleans up some complicated code, and replaces it with a
cleaner version, using code from remote.[ch], which got extended a
little in the process. This also enables us to fix two cases:
The earlier "fix" to setup tracking only when the original ref started
with "refs/remotes" is wrong. You are absolutely allowed to use a
separate layout for your tracking branches. The correct fix, of course,
is to set up tracking information only when there is a matching
remote.<nick>.fetch line containing a colon.
Another corner case was not handled properly. If two remotes write to
the original ref, just warn the user and do not set up tracking.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Junio noticed that switching on autosetupmerge unilaterally started
cluttering the config for local branches. That is not the original
intention of branch.autosetupmerge, which was meant purely for
convenience when branching off of remote branches, but that semantics
got lost somewhere.
If you still want that "new" behavior, you can switch
branch.autosetupmerge to the value "all". Otherwise, it is interpreted
as a boolean, which triggers setting up defaults _only_ when branching
off of a remote branch, i.e. the originally intended behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses the remove-dashes target to replace "git-frotz" to "git frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When deleting branches, remove the sections referring to these branches
from the config file.
Signed-off-by: Gerrit Pape <pape@smarden.org>
|
|
The original code did not take hierarchical branch names into account at all.
Tested-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The renaming without config test changed a branch from q to Q, which
fails on non-case sensitive file systems. Change the test to use q
and q2.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make git_config_rename_section return success if no config file
exists. Otherwise, renaming a branch would abort, leaving the
repository in an inconsistent state.
[jc: test]
Signed-off-by: Geert Bosch <bosch@gnat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch adds support for a dummy remote '.' to avoid having
to declare a fake remote like
[remote "local"]
url = .
fetch = refs/heads/*:refs/heads/*
Such a builtin remote simplifies the operation of "git-fetch",
which will populate FETCH_HEAD but will not pretend that two
repositories are in use, will not create a thin pack, and will
not perform any useless remapping of names. The speed
improvement is around 20%, and it should improve more if
"git-fetch" is converted to a builtin.
To this end, git-parse-remote is grown with a new kind of
remote, 'builtin'. In git-fetch.sh, we treat the builtin remote
specially in that it needs no pack/store operations. In fact,
doing git-fetch on a builtin remote will simply populate
FETCH_HEAD appropriately.
The patch also improves of the --track/--no-track support,
extending it so that branch.<name>.remote items referring '.'
can be created. Finally, it fixes a typo in git-checkout.sh.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In order to track and build on top of a branch 'topic' you track from
your upstream repository, you often would end up doing this sequence:
git checkout -b mytopic origin/topic
git config --add branch.mytopic.remote origin
git config --add branch.mytopic.merge refs/heads/topic
This would first fork your own 'mytopic' branch from the 'topic'
branch you track from the 'origin' repository; then it would set up two
configuration variables so that 'git pull' without parameters does the
right thing while you are on your own 'mytopic' branch.
This commit adds a --track option to git-branch, so that "git
branch --track mytopic origin/topic" performs the latter two actions
when creating your 'mytopic' branch.
If the configuration variable branch.autosetupmerge is set to true, you
do not have to pass the --track option explicitly; further patches in
this series allow setting the variable with a "git remote add" option.
The configuration variable is off by default, and there is a --no-track
option to countermand it even if the variable is set.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Tom Prince <tom.prince@ualberta.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When switching branches with "git checkout", we internally did $arg^0
(aka $arg^{commit}) suffix but there was no need to.
The improvement is easily visible in the change to an existing
test t/3200-branch.sh in this commit; it was expecting rather
ugly message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When renaming a branch, the corresponding config section should
be renamed, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The current check for symlinked reflogs was based on stat(2), which is
utterly embarrassing.
Fix it, and add a matching testcase.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Extend git-branch with the following options:
git-branch -m|-M [<oldbranch>] newbranch
The -M variation is required to force renaming over an exsisting
branchname.
This also indroduces $GIT_DIR/RENAME_REF which is a "metabranch"
used when renaming branches. It will always hold the original sha1
for the latest renamed branch.
Additionally, if $GIT_DIR/logs/RENAME_REF exists, all branch rename
events are logged there.
Finally, some testcases are added to verify the new options.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The test expected "git branch --help" to exit successfully, but
built-ins spawn "man" when given --help, and when the test is
run, manpages may not be installed yet and "man" can legally
exit non-zero in such a case.
Also the new implementation logs "Created from master", instead
of "Created from HEAD" in the reflog, which makes a lot more
sense, so adjust the test to match that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch also adds test cases from Linus and Junio.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If the user supplies -l to git-branch when creating a new branch
then the new branch's log should be created automatically and the
branch creation should be logged in that log.
Further if a branch is being deleted and it had a log then also
verify that the log was deleted.
Test git-checkout -b foo -l for creating a new branch foo with a
log and checking out that branch.
Fixed git-checkout -b foo -l as the branch variable name was
incorrect in the script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make git-update-ref create references with slashes in them. git-branch
and git-checkout already support such reference names.
git-branch can use git-update-ref to create the references in a more
formal manner now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Earlier we renamed git-foo.sh to git-foo while installing, which
was mostly done by inertia than anything else. This however
made writing tests to use scripts harder.
This patch builds the scripts the same way as we build binaries
from their sources. As a side effect, you can now specify
non-standard paths you have your Perl binary is in when running
the make.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If you run `git branch --help', you will unexpectedly have created a new
branch named "--help". This simple patch adds logic and a usage
statement to catch this and similar problems, and adds a testcase for it.
Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Johannes Sixt
Brandon Casey
Brandon Casey
Miklos Vajna
Nanako Shiraishi
Stephan Beyer
Dustin Sallings
Daniel Barkalow
Jay Soffian
Johannes Schindelin
Gerrit Pape
Arjen Laarhoven
Brian Gernhardt
Geert Bosch
Paolo Bonzini
Paolo Bonzini
Tom Prince
Junio C Hamano
Lars Hjemli
Christian Couder
Shawn Pearce
Alex Riesen
Amos Waterland