summaryrefslogtreecommitdiff
path: root/t/t3200-branch.sh
AgeCommit message (Collapse)AuthorFilesLines
2007-07-11branch --track: code cleanup and saner handling of local branchesLibravatar Johannes Schindelin1-10/+11
This patch cleans up some complicated code, and replaces it with a cleaner version, using code from remote.[ch], which got extended a little in the process. This also enables us to fix two cases: The earlier "fix" to setup tracking only when the original ref started with "refs/remotes" is wrong. You are absolutely allowed to use a separate layout for your tracking branches. The correct fix, of course, is to set up tracking information only when there is a matching remote.<nick>.fetch line containing a colon. Another corner case was not handled properly. If two remotes write to the original ref, just warn the user and do not set up tracking. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-08branch.autosetupmerge: allow boolean values, or "all"Libravatar Johannes Schindelin1-0/+9
Junio noticed that switching on autosetupmerge unilaterally started cluttering the config for local branches. That is not the original intention of branch.autosetupmerge, which was meant purely for convenience when branching off of remote branches, but that semantics got lost somewhere. If you still want that "new" behavior, you can switch branch.autosetupmerge to the value "all". Otherwise, it is interpreted as a boolean, which triggers setting up defaults _only_ when branching off of a remote branch, i.e. the originally intended behavior. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-81/+81
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-09git-branch: cleanup config file when deleting branchesLibravatar Gerrit Pape1-0/+9
When deleting branches, remove the sections referring to these branches from the config file. Signed-off-by: Gerrit Pape <pape@smarden.org>
2007-06-06git-branch --track: fix tracking branch computation.Libravatar Junio C Hamano1-4/+12
The original code did not take hierarchical branch names into account at all. Tested-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-06t3200-branch.sh: small language nitLibravatar Arjen Laarhoven1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-06Distinguish branches by more than case in tests.Libravatar Brian Gernhardt1-3/+3
The renaming without config test changed a branch from q to Q, which fails on non-case sensitive file systems. Change the test to use q and q2. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-05Fix renaming branch without config fileLibravatar Geert Bosch1-0/+9
Make git_config_rename_section return success if no config file exists. Otherwise, renaming a branch would abort, leaving the repository in an inconsistent state. [jc: test] Signed-off-by: Geert Bosch <bosch@gnat.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-16git-fetch, git-branch: Support local --track via a special remote '.'Libravatar Paolo Bonzini1-0/+6
This patch adds support for a dummy remote '.' to avoid having to declare a fake remote like [remote "local"] url = . fetch = refs/heads/*:refs/heads/* Such a builtin remote simplifies the operation of "git-fetch", which will populate FETCH_HEAD but will not pretend that two repositories are in use, will not create a thin pack, and will not perform any useless remapping of names. The speed improvement is around 20%, and it should improve more if "git-fetch" is converted to a builtin. To this end, git-parse-remote is grown with a new kind of remote, 'builtin'. In git-fetch.sh, we treat the builtin remote specially in that it needs no pack/store operations. In fact, doing git-fetch on a builtin remote will simply populate FETCH_HEAD appropriately. The patch also improves of the --track/--no-track support, extending it so that branch.<name>.remote items referring '.' can be created. Finally, it fixes a typo in git-checkout.sh. Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-10git-branch, git-checkout: autosetup for remote branch trackingLibravatar Paolo Bonzini1-11/+54
In order to track and build on top of a branch 'topic' you track from your upstream repository, you often would end up doing this sequence: git checkout -b mytopic origin/topic git config --add branch.mytopic.remote origin git config --add branch.mytopic.merge refs/heads/topic This would first fork your own 'mytopic' branch from the 'topic' branch you track from the 'origin' repository; then it would set up two configuration variables so that 'git pull' without parameters does the right thing while you are on your own 'mytopic' branch. This commit adds a --track option to git-branch, so that "git branch --track mytopic origin/topic" performs the latter two actions when creating your 'mytopic' branch. If the configuration variable branch.autosetupmerge is set to true, you do not have to pass the --track option explicitly; further patches in this series allow setting the variable with a "git remote add" option. The configuration variable is off by default, and there is a --no-track option to countermand it even if the variable is set. Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28[PATCH] Rename git-repo-config to git-config.Libravatar Tom Prince1-3/+3
Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-08git-checkout: fix branch name output from the commandLibravatar Junio C Hamano1-1/+1
When switching branches with "git checkout", we internally did $arg^0 (aka $arg^{commit}) suffix but there was no need to. The improvement is easily visible in the change to an existing test t/3200-branch.sh in this commit; it was expecting rather ugly message. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-16git-branch: rename config vars branch.<branch>.*, tooLibravatar Johannes Schindelin1-0/+6
When renaming a branch, the corresponding config section should be renamed, too. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-05rename_ref: use lstat(2) when testing for symlinkLibravatar Lars Hjemli1-0/+7
The current check for symlinked reflogs was based on stat(2), which is utterly embarrassing. Fix it, and add a matching testcase. Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-05git-branch: add options and tests for branch renamingLibravatar Lars Hjemli1-0/+34
Extend git-branch with the following options: git-branch -m|-M [<oldbranch>] newbranch The -M variation is required to force renaming over an exsisting branchname. This also indroduces $GIT_DIR/RENAME_REF which is a "metabranch" used when renaming branches. It will always hold the original sha1 for the latest renamed branch. Additionally, if $GIT_DIR/logs/RENAME_REF exists, all branch rename events are logged there. Finally, some testcases are added to verify the new options. Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-23t3200: git-branch testsuite updateLibravatar Junio C Hamano1-6/+3
The test expected "git branch --help" to exit successfully, but built-ins spawn "man" when given --help, and when the test is run, manpages may not be installed yet and "man" can legally exit non-zero in such a case. Also the new implementation logs "Created from master", instead of "Created from HEAD" in the reflog, which makes a lot more sense, so adjust the test to match that. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-25Remove empty ref directories that prevent creating a ref.Libravatar Christian Couder1-0/+12
This patch also adds test cases from Linus and Junio. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-24Test that git-branch -l works.Libravatar Shawn Pearce1-1/+30
If the user supplies -l to git-branch when creating a new branch then the new branch's log should be created automatically and the branch creation should be logged in that log. Further if a branch is being deleted and it had a log then also verify that the log was deleted. Test git-checkout -b foo -l for creating a new branch foo with a log and checking out that branch. Fixed git-checkout -b foo -l as the branch variable name was incorrect in the script. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-14t3200: branch --help does not die anymore.Libravatar Junio C Hamano1-2/+2
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-14allow git-update-ref create refs with slashes in namesLibravatar Alex Riesen1-0/+8
Make git-update-ref create references with slashes in them. git-branch and git-checkout already support such reference names. git-branch can use git-update-ref to create the references in a more formal manner now. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-08'build' scripts before installing.Libravatar Junio C Hamano1-3/+3
Earlier we renamed git-foo.sh to git-foo while installing, which was mostly done by inertia than anything else. This however made writing tests to use scripts harder. This patch builds the scripts the same way as we build binaries from their sources. As a side effect, you can now specify non-standard paths you have your Perl binary is in when running the make. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07[PATCH] Do not create bogus branch from flag to git branchLibravatar Amos Waterland1-0/+27
If you run `git branch --help', you will unexpectedly have created a new branch named "--help". This simple patch adds logic and a usage statement to catch this and similar problems, and adds a testcase for it. Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>