| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change various tests that use an idiom of the form:
>expect &&
test_cmp expect actual
To instead use:
test_must_be_empty actual
The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:
git grep '^\s+>.*expect.* &&$' t
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark the newly added test which creates test files on-disk as
EXPENSIVE_ON_WINDOWS. According to [1] it takes almost ten minutes to
run this test file on Windows after this recent change, but just a few
seconds on Linux as noted in my [2].
This could be done faster by exiting earlier, however by using this
pattern we'll emit "skip" lines for each skipped test, making it clear
we're not running a lot of them in the TAP output, at the cost of some
overhead.
1. nycvar.QRO.7.76.6.1801061337020.1337@wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet
(https://public-inbox.org/git/nycvar.QRO.7.76.6.1801061337020.1337@wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet/)
2. 87mv1raz9p.fsf@evledraar.gmail.com
(https://public-inbox.org/git/87mv1raz9p.fsf@evledraar.gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has never been any full roundtrip testing of what git-ls-files
and other commands that use wildmatch() actually do, rather we've been
satisfied with just testing the underlying C function.
Due to git-ls-files and friends having their own codepaths before they
call wildmatch() there's sometimes differences in the behavior between
the two. Even when we test for those (as with [1]), there was no one
place where you can review how these two modes differ.
Now there is. We now attempt to create a file called $haystack and
match $needle against it for each pair of $needle and $haystack that
we were passing to test-wildmatch.
If we can't create the file we skip the test. This ensures that we can
run this on all platforms and not maintain some infinitely growing
whitelist of e.g. platforms that don't support certain characters in
filenames.
A notable exception to this is Windows, where due to the reasons
explained in [2] the shellscript emulation layer might fake the
creation of a file such as "*", and "test -e" for it will succeed
since it just got created with some character that maps to "*", but
git ls-files won't be fooled by this.
Thus we need to skip creating certain filenames entirely on Windows,
the list here might be overly aggressive. I don't have access to a
Windows system to test this.
As a result of doing these tests we can now see the cases where these
two ways of testing wildmatch differ:
* Creating a file called 'a[]b' and running ls-files 'a[]b' will show
that file, but wildmatch("a[]b", "a[]b") will not match
* wildmatch() won't match a file called \ against \, but ls-files
will.
* `git --glob-pathspecs ls-files 'foo**'` will match a file
'foo/bba/arr', but wildmatch won't, however pathmatch will.
This seems like a bug to me, the two are otherwise equivalent as
these tests show.
This also reveals the case discussed in [1], since 2.16.0 '' is now an
error as far as ls-files is concerned, but wildmatch() itself happily
accepts it.
1. 9e4e8a64c2 ("pathspec: die on empty strings as pathspec",
2017-06-06)
2. nycvar.QRO.7.76.6.1801052133380.1337@wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet
(https://public-inbox.org/git/?q=nycvar.QRO.7.76.6.1801052133380.1337%40wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite the wildmatch() test suite so that each test now tests all
combinations of the wildmatch() WM_CASEFOLD and WM_PATHNAME flags.
Before this change some test inputs were not tested on
e.g. WM_PATHNAME. Now the function is stress tested on all possible
inputs, and for each input we declare what the result should be if the
mode is case-insensitive, or pathname matching, or case-sensitive or
not matching pathnames.
Also before this change, nothing was testing case-insensitive
non-pathname matching, so I've added that to test-wildmatch.c and made
use of it.
This yields a rather scary patch, but there are no functional changes
here, just more test coverage. Some now-redundant tests were deleted
as a result of this change, since they were now duplicating an earlier
test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use of ! should be reserved for non-git programs that are assumed not
to fail, see README. With this change only
t/t0110-urlmatch-normalization.sh is still using this anti-pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the unused fnmatch() test parameter from the wildmatch
test. The code that used to test this was removed in 70a8fc999d ("stop
using fnmatch (either native or compat)", 2014-02-15).
As a --word-diff shows the only change to the body of the tests is the
removal of the second out of four parameters passed to match().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a pattern from the nul_match() function in t7008-grep-binary.sh to
make sure that we don't just fall through to the "else" if there's an
unknown parameter.
This is something I added in commit 77f6f4406f ("grep: add a test
helper function for less verbose -f \0 tests", 2017-05-20) to grep
tests, which were modeled on these wildmatch tests, and I'm now
porting back to the original wildmatch tests.
I am not using the "say '...'; exit 1" pattern from t0000-basic.sh
because if I fail I want to run the rest of the tests (unless under
-i), and doing this makes sure we do that and don't exit right away
without fully reporting our errors.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't try to vertically align the test output, which is futile anyway
under the TAP output where we're going to be emitting a number for
each test without aligning the test count.
This makes subsequent changes of mine where I'm not going to be
aligning this output as I add new tests easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the wildmatch test to use more standard shell style, usually we
use "if test" not "if [".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace the 4-width mixed space & tab indentation in this file with
indentation with tabs as we do in most of the rest of our tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A negated character class that does not include '/', e.g. [^a-z]:
- Should match '/' when doing "wildmatch"
- Should not match '/' when doing "pathmatch"
Add two tests to cover these cases.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a test line that's exactly the same as the preceding
line.
This was brought in in commit feabcc173b ("Integrate wildmatch to
git", 2012-10-15), these tests are originally copied from rsync.git,
but the duplicate line was never present there, so must have just
snuck in during integration with git by accident.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since v1.8.4 (about six months ago) wildmatch is used as default
replacement for fnmatch. We have seen only one fix since so wildmatch
probably has done a good job as fnmatch replacement. This concludes
the fnmatch->wildmatch transition by no longer relying on fnmatch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Case folding is not done correctly when matching against the [:upper:]
character class and uppercased character ranges (e.g. A-Z).
Specifically, an uppercase letter fails to match against any of them
when case folding is requested because plain characters in the pattern
and the whole string are preemptively lowercased to handle the base case
fast.
That optimization is kept and ISLOWER() is used in the [:upper:] case
when case folding is requested, while matching against a character range
is retried with toupper() if the character was lowercase, as the bounds
of the range itself cannot be modified (in a case-insensitive context,
[A-_] is not equivalent to [a-_]).
Signed-off-by: Anthony Ramine <n.oxyde@gmail.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Normally when we match "*X" on "abcX", we call dowild("X", "abcX"),
dowild("X", "bcX"), dowild("X", "cX") and dowild("X", "X"). Only the
last call may have a chance of matching. By skipping the text before
"X", we can eliminate the first three useless calls.
compat, '*/*/*' on linux-2.6.git file list 2000 times, before:
wildmatch 7s 985049us
fnmatch 2s 735541us or 34.26% faster
and after:
wildmatch 4s 492549us
fnmatch 0s 888263us or 19.77% slower
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Normally we need recursion for "*". In this case we know that it
matches everything until "/" so we can skip the recursion.
glibc, '*/*/*' on linux-2.6.git file list 2000 times
before:
wildmatch 8s 74513us
fnmatch 1s 97042us or 13.59% faster
after:
wildmatch 3s 521862us
fnmatch 3s 488616us or 99.06% slower
Same test with compat/fnmatch:
wildmatch 8s 110763us
fnmatch 2s 980845us or 36.75% faster
wildmatch 3s 522156us
fnmatch 1s 544487us or 43.85% slower
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So far, wildmatch() has always honoured directory boundary and there
was no way to turn it off. Make it behave more like fnmatch() by
requiring all callers that want the FNM_PATHNAME behaviour to pass
that in the equivalent flag WM_PATHNAME. Callers that do not specify
WM_PATHNAME will get wildcards like ? and * in their patterns matched
against '/', just like not passing FNM_PATHNAME to fnmatch().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"**" is adjusted to only be effective when surrounded by slashes, in
40bbee0 (wildmatch: adjust "**" behavior - 2012-10-15). Except that
the commit did it wrong:
1. when it checks for "the preceding slash unless ** is at the
beginning", it compares to wrong pointer. It should have compared
to the beginning of the pattern, not the text.
2. prev_p points to the character before "**", not the first "*". The
correct comparison must be "prev_p < pattern" or
"prev_p + 1 == pattern", not "prev_p == pattern".
3. The pattern must be surrounded by slashes unless it's at the
beginning or the end of the pattern. We do two checks: one for the
preceding slash and one the trailing slash. Both checks must be
met. The use of "||" is wrong.
This patch fixes all above.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The failing tests make use of a POSIX character class, '[:xdigit:]'
in this case, which some versions of the fnmatch() library function
do not support. In the spirit of commit f1cf7b79 ("t3070: disable
unreliable fnmatch tests", 15-10-2012), we disable the fnmatch() half
of these tests.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The MSYS bash mangles arguments that begin with a forward slash
when they are passed to test-wildmatch. This causes tests to fail.
Avoid mangling by prepending "XXX", which is removed by
test-wildmatch before further processing.
[J6t: reworded commit message]
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
"foo/**/bar" matches "foo/x/bar", "foo/x/y/bar"... but not
"foo/bar". We make a special case, when foo/**/ is detected (and
"foo/" part is already matched), try matching "bar" with the rest of
the string.
"Match one or more directories" semantics can be easily achieved using
"foo/*/**/bar".
This also makes "**/foo" match "foo" in addition to "x/foo",
"x/y/foo"..
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Standard wildmatch() sees consecutive asterisks as "*" that can also
match slashes. But that may be hard to explain to users as
"abc/**/def" can match "abcdef", "abcxyzdef", "abc/def", "abc/x/def",
"abc/x/y/def"...
This patch changes wildmatch so that users can do
- "**/def" -> all paths ending with file/directory 'def'
- "abc/**" - equivalent to "/abc/"
- "abc/**/def" -> "abc/x/def", "abc/x/y/def"...
- otherwise consider the pattern malformed if "**" is found
Basically the magic of "**" only remains if it's wrapped around by
slashes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests show different results on different fnmatch() versions. We
don't want to test fnmatch here. We want to make sure wildmatch
behavior matches fnmatch and that only makes sense in cases when
fnmatch() behaves consistently.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Nguyễn Thái Ngọc Duy
Ville Skyttä
Anthony Ramine
Ramsay Jones