summaryrefslogtreecommitdiff
path: root/t/t3001-ls-files-others-exclude.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-08-21tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'Libravatar SZEDER Gábor1-4/+2
Using 'test_must_be_empty' is shorter and more idiomatic than >empty && test_cmp empty out as it saves the creation of an empty file. Furthermore, sometimes the expected empty file doesn't have such a descriptive name like 'empty', and its creation is far away from the place where it's finally used for comparison (e.g. in 't7600-merge.sh', where two expected empty files are created in the 'setup' test, but are used only about 500 lines later). These cases were found by instrumenting 'test_cmp' to error out the test script when it's used to compare empty files, and then converted manually. Note that even after this patch there still remain a lot of cases where we use 'test_cmp' to check empty files: - Sometimes the expected output is not hard-coded in the test, but 'test_cmp' is used to ensure that two similar git commands produce the same output, and that output happens to be empty, e.g. the test 'submodule update --merge - ignores --merge for new submodules' in 't7406-submodule-update.sh'. - Repetitive common tasks, including preparing the expected results and running 'test_cmp', are often extracted into a helper function, and some of this helper's callsites expect no output. - For the same reason as above, the whole 'test_expect_success' block is within a helper function, e.g. in 't3070-wildmatch.sh'. - Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update (-p)' in 't9400-git-cvsserver-server.sh'. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30tests: make use of the test_must_be_empty functionLibravatar Ævar Arnfjörð Bjarmason1-10/+5
Change various tests that use an idiom of the form: >expect && test_cmp expect actual To instead use: test_must_be_empty actual The test_must_be_empty() wrapper was introduced in ca8d148daf ("test: test_must_be_empty helper", 2013-06-09). Many of these tests have been added after that time. This was mostly found with, and manually pruned from: git grep '^\s+>.*expect.* &&$' t Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-18Revert "Merge branch 'nd/exclusion-regression-fix'"Libravatar Junio C Hamano1-2/+5
This reverts commit 5e57f9c3dfe7dd44a1b56bb5b3327d7a1356ec7c, reversing changes made to e79112d21024beb997951381db21a70b087d459d. We will be postponing nd/exclusion-regression-fix topic to later cycle.
2016-02-15dir.c: don't exclude whole dir prematurelyLibravatar Nguyễn Thái Ngọc Duy1-5/+2
If there is a pattern "!foo/bar", this patch makes it not exclude "foo" right away. This gives us a chance to examine "foo" and re-include "foo/bar". Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Helped-by: Micha Wiedenmann <mw-u2@gmx.de> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-20Merge branch 'nd/exclusion-regression-fix'Libravatar Junio C Hamano1-25/+0
The ignore mechanism saw a few regressions around untracked file listing and sparse checkout selection areas in 2.7.0; the change that is responsible for the regression has been reverted. * nd/exclusion-regression-fix: Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
2016-01-08Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"Libravatar Nguyễn Thái Ngọc Duy1-25/+0
This reverts commit 57534ee77d22e725d971ee89c77dc6aad61c573f. The feature added in that commit requires that patterns behave the same way from anywhere. But some patterns can behave differently depending on current "working" directory. The conditions to catch and avoid these patterns are too loose. The untracked listing[1] and sparse-checkout selection[2] can become incorrect as a result. [1] http://article.gmane.org/gmane.comp.version-control.git/283520 [2] http://article.gmane.org/gmane.comp.version-control.git/283532 Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-07Merge branch 'nd/ignore-then-not-ignore'Libravatar Junio C Hamano1-0/+25
Allow a later "!/abc/def" to override an earlier "/abc" that appears in the same .gitignore file to make it easier to express "everything in /abc directory is ignored, except for ...". * nd/ignore-then-not-ignore: dir.c: don't exclude whole dir prematurely if neg pattern may match dir.c: make last_exclude_matching_from_list() run til the end
2015-09-21dir.c: don't exclude whole dir prematurely if neg pattern may matchLibravatar Nguyễn Thái Ngọc Duy1-0/+25
If there is a pattern "!foo/bar", this patch makes it not exclude "foo" right away. This gives us a chance to examine "foo" and re-include "foo/bar". In order for it to detect that the directory under examination should not be excluded right away, in other words it is a parent directory of a negative pattern, the "directory path" of the negative pattern must be literal. Patterns like "!f?o/bar" can't stop "foo" from being excluded. Basename matching (i.e. "no slashes in the pattern") or must-be-dir matching (i.e. "trailing slash in the pattern") does not work well with this. For example, if we descend in "foo" and are examining "foo/abc", current code for "foo/" pattern will check if path "foo/abc", not "foo", is a directory. The same problem with basename matching. These may need big code reorg to make it work. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix moderate &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, but in a way that probably does not effect the outcome of the test. Most of these are of the form: some_cmd >actual test_cmp expect actual The main point of the test is to verify the output, and a failure in some_cmd would probably be noticed by bogus output. But it is good for the tests to also confirm that "some_cmd" does not die unexpectedly after producing its output. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-06status: disable display of '#' comment prefix by defaultLibravatar Matthieu Moy1-1/+1
Historically, "git status" needed to prefix each output line with '#' so that the output could be added as comment to the commit message. This prefix comment has no real purpose when "git status" is ran from the command-line, and this may distract users from the real content. Disable this prefix comment by default, and make it re-activable for users needing backward compatibility with status.displayCommentPrefix. Obviously, "git commit" ignores status.displayCommentPrefix and keeps the comment unconditionnaly when writing to COMMIT_EDITMSG (but not when writing to stdout for an error message or with --dry-run). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-03Merge branch 'kb/status-ignored-optim-2'Libravatar Junio C Hamano1-0/+18
Fix 1.8.3 regressions in the .gitignore path exclusion logic. * kb/status-ignored-optim-2: dir.c: fix ignore processing within not-ignored directories
2013-06-02dir.c: fix ignore processing within not-ignored directoriesLibravatar Karsten Blees1-0/+18
As of 95c6f271 "dir.c: unify is_excluded and is_path_excluded APIs", the is_excluded API no longer recurses into directories that match an ignore pattern, and returns the directory's ignored state for all contained paths. This is OK for normal ignore patterns, i.e. ignoring a directory affects the entire contents recursively. Unfortunately, this also "works" for negated ignore patterns ('!dir'), i.e. the entire contents is "not-ignored" recursively, regardless of ignore patterns that match the contents directly. In prep_exclude, skip recursing into a directory only if it is really ignored (i.e. the ignore pattern is not negated). Signed-off-by: Karsten Blees <blees@dcon.de> Tested-by: Øystein Walle <oystwa@gmail.com> Reviewed-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-23Merge branch 'kb/status-ignored-optim-2'Libravatar Junio C Hamano1-0/+49
Fixes a handful of issues in the code to traverse working tree to find untracked and/or ignored files, cleans up and optimizes the codepath in general. * kb/status-ignored-optim-2: dir.c: git-status --ignored: don't scan the work tree twice dir.c: git-status --ignored: don't scan the work tree three times dir.c: git-status: avoid is_excluded checks for tracked files dir.c: replace is_path_excluded with now equivalent is_excluded API dir.c: unify is_excluded and is_path_excluded APIs dir.c: move prep_exclude dir.c: factor out parts of last_exclude_matching for later reuse dir.c: git-clean -d -X: don't delete tracked directories dir.c: make 'git-status --ignored' work within leading directories dir.c: git-status --ignored: don't list empty directories as ignored dir.c: git-ls-files --directories: don't hide empty directories dir.c: git-status --ignored: don't list empty ignored directories dir.c: git-status --ignored: don't list files in ignored directories dir.c: git-status --ignored: don't drop ignored directories
2013-04-15dir.c: git-clean -d -X: don't delete tracked directoriesLibravatar Karsten Blees1-0/+26
The notion of "ignored tracked" directories introduced in 721ac4ed "dir.c: Make git-status --ignored more consistent" has a few unwanted side effects: - git-clean -d -X: deletes ignored tracked directories. git-clean should never delete tracked content. - git-ls-files --ignored --other --directory: lists ignored tracked directories instead of "other" directories. - git-status --ignored: lists ignored tracked directories while contained files may be listed as modified. Paths listed by git-status should be disjoint (except in long format where a path may be listed in both the staged and unstaged section). Additionally, the current behaviour violates documentation in gitignore(5) ("Specifies intentionally *untracked* files to ignore") and Documentation/ technical/api-directory-listing.txt ("DIR_SHOW_OTHER_DIRECTORIES: Include a directory that is *not tracked*."). In dir.c::treat_directory, remove the special handling of ignored tracked directories, so that the DIR_SHOW_OTHER_DIRECTORIES flag only affects "other" (i.e. untracked) directories. In dir.c::dir_add_name, check that added paths are untracked even if DIR_SHOW_IGNORED is set. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15dir.c: git-ls-files --directories: don't hide empty directoriesLibravatar Karsten Blees1-0/+23
'git-ls-files --ignored --directories' hides empty directories even though --no-empty-directory was not specified. Treat the DIR_HIDE_EMPTY_DIRECTORIES flag independently from DIR_SHOW_IGNORED to make all git-ls-files options work as expected. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15checkout: add --ignore-skip-worktree-bits in sparse checkout modeLibravatar Nguyễn Thái Ngọc Duy1-1/+1
"git checkout -- <paths>" is usually used to restore all modified files in <paths>. In sparse checkout mode, this command is overloaded with another meaning: to add back all files in <paths> that are excluded by sparse patterns. As the former makes more sense for day-to-day use. Switch it to the default and the latter enabled with --ignore-skip-worktree-bits. While at there, add info/sparse-checkout to gitrepository-layout.txt Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-15Support "**" wildcard in .gitignore and .gitattributesLibravatar Nguyễn Thái Ngọc Duy1-0/+18
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-15exclude: fix a bug in prefix compare optimizationLibravatar Nguyễn Thái Ngọc Duy1-0/+6
When "namelen" becomes zero at this stage, we have matched the fixed part, but whether it actually matches the pattern still depends on the pattern in "exclude". As demonstrated in t3001, path "three/a.3" exists and it matches the "three/a.3" part in pattern "three/a.3[abc]", but that does not mean a true match. Don't be too optimistic and let fnmatch() do the job. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09tests: add missing &&Libravatar Jonathan Nieder1-1/+1
Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain. Commands intended to fail should be marked with !, test_must_fail, or test_might_fail. The examples in this patch do not require that. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'jc/ls-files-ignored-pathspec'Libravatar Junio C Hamano1-0/+39
* jc/ls-files-ignored-pathspec: ls-files: fix overeager pathspec optimization read_directory(): further split treat_path() read_directory_recursive(): refactor handling of a single path into a separate function t3001: test ls-files -o ignored/dir
2010-01-08ls-files: fix overeager pathspec optimizationLibravatar Junio C Hamano1-1/+1
Given pathspecs that share a common prefix, ls-files optimized its call into recursive directory reader by starting at the common prefix directory. If you have a directory "t" with an untracked file "t/junk" in it, but the top-level .gitignore file told us to ignore "t/", this resulted in: $ git ls-files -o --exclude-standard $ git ls-files -o --exclude-standard t/ t/junk $ git ls-files -o --exclude-standard t/junk t/junk $ cd t && git ls-files -o --exclude-standard junk We could argue that you are overriding the ignore file by giving a patchspec that matches or being in that directory, but it is somewhat unexpected. Worse yet, these behave differently: $ git ls-files -o --exclude-standard t/ . $ git ls-files -o --exclude-standard t/ t/junk This patch changes the optimization so that it notices when the common prefix directory that it starts reading from is an ignored one. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08t3001: test ls-files -o ignored/dirLibravatar Junio C Hamano1-0/+39
When you have "t" directory that is marked as ignored in the top-level .gitignore file (or $GIT_DIR/info/exclude), running $ git ls-files -o --exclude-standard from the top-level correctly excludes files in "t" directory, but any of the following: $ git ls-files -o --exclude-standard t/ $ cd t && git ls-files -o --exclude-standard would show untracked files in that directory. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-23Read .gitignore from index if it is skip-worktreeLibravatar Nguyễn Thái Ngọc Duy1-0/+22
This adds index as a prerequisite for directory listing (with exclude). At the moment directory listing is used by "git clean", "git add", "git ls-files" and "git status"/"git commit" and unpack_trees()-related commands. These commands have been checked/modified to populate index before doing directory listing. add_excludes_from_file() does not enable this feature, because it is used to read .git/info/exclude and some explicit files specified by "git ls-files". Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-05Merge branch 'fg/exclude-bq'Libravatar Junio C Hamano1-1/+8
* fg/exclude-bq: Support "\" in non-wildcard exclusion entries
2009-02-12Support "\" in non-wildcard exclusion entriesLibravatar Finn Arne Gangstad1-1/+8
"\" was treated differently in exclude rules depending on whether a wildcard match was done. For wildcard rules, "\" was de-escaped in fnmatch, but this was not done for other rules since they used strcmp instead. A file named "#foo" would not be excluded by "\#foo", but would be excluded by "\#foo*". We now treat all rules with "\" as wildcard rules. Another solution could be to de-escape all non-wildcard rules as we read them, but we would have to do the de-escaping exactly as fnmatch does it to avoid inconsistencies. Signed-off-by: Finn Arne Gangstad <finnag@pvv.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-18test overlapping ignore patternsLibravatar Michael J Gruber1-0/+6
Add a test which checks that negated patterns such as "!foo.html" can override previous patterns such as "*.html". This is documented behaviour but had not been tested so far. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03tests: use "git xyzzy" form (t0000 - t3599)Libravatar Nanako Shiraishi1-1/+1
Converts tests between t0050-t3903. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-24tests: do not use implicit "git diff --no-index"Libravatar Junio C Hamano1-2/+2
As a general principle, we should not use "git diff" to validate the results of what git command that is being tested has done. We would not know if we are testing the command in question, or locating a bug in the cute hack of "git diff --no-index". Rather use test_cmp for that purpose. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13add test_cmp function for test scriptsLibravatar Jeff King1-1/+1
Many scripts compare actual and expected output using "diff -u". This is nicer than "cmp" because the output shows how the two differ. However, not all versions of diff understand -u, leading to unnecessary test failure. This adds a test_cmp function to the test scripts and switches all "diff -u" invocations to use it. The function uses the contents of "$GIT_TEST_CMP" to compare its arguments; the default is "diff -u". On systems with a less-capable diff, you can do: GIT_TEST_CMP=cmp make test Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-05gitignore(5): Allow "foo/" in ignore list to match directory "foo"Libravatar Junio C Hamano1-0/+41
A pattern "foo/" in the exclude list did not match directory "foo", but a pattern "foo" did. This attempts to extend the exclude mechanism so that it would while not matching a regular file or a symbolic link "foo". In order to differentiate a directory and non directory, this passes down the type of path being checked to excluded() function. A downside is that the recursive directory walk may need to run lstat(2) more often on systems whose "struct dirent" do not give the type of the entry; earlier it did not have to do so for an excluded path, but we now need to figure out if a path is a directory before deciding to exclude it. This is especially bad because an idea similar to the earlier CE_UPTODATE optimization to reduce number of lstat(2) calls would by definition not apply to the codepaths involved, as (1) directories will not be registered in the index, and (2) excluded paths will not be in the index anyway. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-22Replace "runstatus" with "status" in the testsLibravatar Johannes Schindelin1-1/+1
We no longer have "runstatus", but running "status" is no longer that expensive anyway; it is a builtin. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-8/+8
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-21git-status: respect core.excludesFileLibravatar Johannes Schindelin1-0/+20
git-add reads this variable, and honours the contents of that file if that exists. Match this behaviour in git-status, too. Noticed by Evan Carroll on IRC. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04Get rid of the dependency to GNU diff in the testsLibravatar Johannes Schindelin1-2/+2
Now that "git diff" handles stdin and relative paths outside the working tree correctly, we can convert all instances of "diff -u" to "git diff". This commit is really the result of $ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net> (cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
2006-02-12avoid echo -e, there are systems where it does not workLibravatar Alex Riesen1-1/+1
FreeBSD 4.11 being one example: the built-in echo doesn't have -e, and the installed /bin/echo does not do "-e" as well. "printf" works, laking just "\e" and "\xAB'. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-02remove CR/LF from .gitignoreLibravatar Alex Riesen1-0/+12
For everyone cursed by dos/windows line endings (aka CRLF): The code reading the .gitignore files (excludes and excludes per directory) leaves \r in the patterns, which causes fnmatch to fail for no obvious reason. Just remove a "\r" preceding a "\n" unconditionally. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-11[PATCH] Missing test_doneLibravatar Pavel Roskin1-0/+2
All test scripts should end with test_done, which reports the test results. In the future, it could be used for other purposes, e.g. to distinguish graceful end from "exit" in a test. This patch fixes scripts that don't call test_done. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-29Documentation and tests: ls-files exclude pattern.Libravatar Junio C Hamano1-5/+18
Update the tests and documentation to match the new "last one determines its fate" semantics. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-25git-ls-files: --exclude mechanism updates.Libravatar Junio C Hamano1-0/+55
Add --exclude-per-directory=<name> option that specifies a file to contain exclude patterns local to that directory and its subdirectories. Update the exclusion logic to be able to say "include files that match this more specific pattern, even though later exclude patterns may match them". Also enhances that a pattern can contain '/' in which case fnmatch is called with FNM_PATHNAME flag to match the entire path. Signed-off-by: Junio C Hamano <junkio@cox.net>