summaryrefslogtreecommitdiff
path: root/t/t2400-worktree-add.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-11-19t2*: adjust the references to the default branch name "main"Libravatar Johannes Schindelin1-34/+34
Carefully excluding t2106, which sees independent development elsewhere at the time of writing, we transition above-mentioned tests to the default branch name `main`. This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -- t2*.sh && git checkout HEAD -- t2106\*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19tests: mark tests relying on the current default for `init.defaultBranch`Libravatar Johannes Schindelin1-0/+3
In addition to the manual adjustment to let the `linux-gcc` CI job run the test suite with `master` and then with `main`, this patch makes sure that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts that currently rely on the initial branch name being `master by default. To determine which test scripts to mark up, the first step was to force-set the default branch name to `master` in - all test scripts that contain the keyword `master`, - t4211, which expects `t/t4211/history.export` with a hard-coded ref to initialize the default branch, - t5560 because it sources `t/t556x_common` which uses `master`, - t8002 and t8012 because both source `t/annotate-tests.sh` which also uses `master`) This trick was performed by this command: $ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' $(git grep -l master t/t[0-9]*.sh) \ t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh After that, careful, manual inspection revealed that some of the test scripts containing the needle `master` do not actually rely on a specific default branch name: either they mention `master` only in a comment, or they initialize that branch specificially, or they do not actually refer to the current default branch. Therefore, the aforementioned modification was undone in those test scripts thusly: $ git checkout HEAD -- \ t/t0027-auto-crlf.sh t/t0060-path-utils.sh \ t/t1011-read-tree-sparse-checkout.sh \ t/t1305-config-include.sh t/t1309-early-config.sh \ t/t1402-check-ref-format.sh t/t1450-fsck.sh \ t/t2024-checkout-dwim.sh \ t/t2106-update-index-assume-unchanged.sh \ t/t3040-subprojects-basic.sh t/t3301-notes.sh \ t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \ t/t3436-rebase-more-options.sh \ t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \ t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \ t/t5511-refspec.sh t/t5526-fetch-submodules.sh \ t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \ t/t5548-push-porcelain.sh \ t/t5552-skipping-fetch-negotiator.sh \ t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \ t/t5614-clone-submodules-shallow.sh \ t/t7508-status.sh t/t7606-merge-custom.sh \ t/t9302-fast-import-unpack-limit.sh We excluded one set of test scripts in these commands, though: the range of `git p4` tests. The reason? `git p4` stores the (foreign) remote branch in the branch called `p4/master`, which is obviously not the default branch. Manual analysis revealed that only five of these tests actually require a specific default branch name to pass; They were modified thusly: $ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' t/t980[0167]*.sh t/t9811*.sh Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-24worktree: don't allow "add" validation to be fooled by suffix matchingLibravatar Eric Sunshine1-0/+9
"git worktree add <path>" performs various checks before approving <path> as a valid location for the new worktree. Aside from ensuring that <path> does not already exist, one of the questions it asks is whether <path> is already a registered worktree. To perform this check, it queries find_worktree() and disallows the "add" operation if find_worktree() finds a match for <path>. As a convenience, however, find_worktree() casts an overly wide net to allow users to identify worktrees by shorthand in order to keep typing to a minimum. For instance, it performs suffix matching which, given subtrees "foo/bar" and "foo/baz", can correctly select the latter when asked only for "baz". "add" validation knows the exact path it is interrogating, so this sort of heuristic-based matching is, at best, questionable for this use-case and, at worst, may may accidentally interpret <path> as matching an existing worktree and incorrectly report it as already registered even when it isn't. (In fact, validate_worktree_add() already contains a special case to avoid accidentally matching against the main worktree, precisely due to this problem.) Avoid the problem of potential accidental matching against an existing worktree by instead taking advantage of find_worktree_by_path() which matches paths deterministically, without applying any sort of magic shorthand matching performed by find_worktree(). Reported-by: Cameron Gunnin <cameron.gunnin@synopsys.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-05Merge branch 'dl/t5520-cleanup'Libravatar Junio C Hamano1-2/+2
Test cleanup. * dl/t5520-cleanup: t5520: replace `! git` with `test_must_fail git` t5520: remove redundant lines in test cases t5520: replace $(cat ...) comparison with test_cmp t5520: don't put git in upstream of pipe t5520: test single-line files by git with test_cmp t5520: use test_cmp_rev where possible t5520: replace test -{n,z} with test-lib functions t5520: use test_line_count where possible t5520: remove spaces after redirect operator t5520: replace test -f with test-lib functions t5520: let sed open its own input t5520: use sq for test case names t5520: improve test style t: teach test_cmp_rev to accept ! for not-equals t0000: test multiple local assignment
2019-11-21t: teach test_cmp_rev to accept ! for not-equalsLibravatar Denton Liu1-2/+2
In the case where we are using test_cmp_rev() to report not-equals, we write `! test_cmp_rev`. However, since test_cmp_rev() contains r1=$(git rev-parse --verify "$1") && r2=$(git rev-parse --verify "$2") && `! test_cmp_rev` will succeed if any of the rev-parses fail. This behavior is not desired. We want the rev-parses to _always_ be successful. Rewrite test_cmp_rev() to optionally accept "!" as the first argument to do a not-equals comparison. Rewrite `! test_cmp_rev` to `test_cmp_rev !` in all tests to take advantage of this new functionality. Also, rewrite the rev-parse logic to end with a `|| return 1` instead of &&-chaining into the rev-comparison logic. This makes it obvious to future readers that we explicitly intend on returning early if either of the rev-parses fail. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-30worktree: teach "add" to ignore submodule.recurse configLibravatar Philippe Blain1-0/+24
"worktree add" internally calls "reset --hard", but if submodule.recurse is set, reset tries to recurse into initialized submodules, which makes start_command try to cd into non-existing submodule paths and die. Fix that by making sure that the call to reset in "worktree add" does not recurse. Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-13Merge branch 'nd/corrupt-worktrees'Libravatar Junio C Hamano1-0/+12
"git worktree add" used to fail when another worktree connected to the same repository was corrupt, which has been corrected. * nd/corrupt-worktrees: worktree add: be tolerant of corrupt worktrees
2019-05-15worktree add: sanitize worktree namesLibravatar Nguyễn Thái Ngọc Duy1-0/+5
Worktree names are based on $(basename $GIT_WORK_TREE). They aren't significant until 3a3b9d8cde (refs: new ref types to make per-worktree refs visible to all worktrees - 2018-10-21), where worktree name could be part of a refname and must follow refname rules. Update 'worktree add' code to remove special characters to follow these rules. In the future the user will be able to specify the worktree name by themselves if they're not happy with this dumb character substitution. Reported-by: Konstantin Kharlamov <hi-angel@yandex.ru> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-02move worktree tests to t24*Libravatar Thomas Gummerer1-0/+573
The 'git worktree' command used to be just another mode in 'git checkout', namely 'git checkout --to'. When the tests for the latter were retrofitted for the former, the test name was adjusted, but the test number was kept, even though the test is testing a different command now. t/README states: "Second digit tells the particular command we are testing.", so 'git worktree' should have a separate number just for itself. Move the worktree tests to t24* to adhere to that guideline. We're going to make use of the free'd up numbers in a subsequent commit. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>