summaryrefslogtreecommitdiff
path: root/t/t2300-cd-to-toplevel.sh
AgeCommit message (Collapse)AuthorFilesLines
2021-10-12leak tests: mark various "generic" tests as passing with SANITIZE=leakLibravatar Ævar Arnfjörð Bjarmason1-0/+1
Mark various "generic" tests as passing when git is compiled with SANITIZE=leak. These tests were subjectively picked from the lists of passing tests since they're all small, and test some generic feature such as wildmatch(), commonly used environment variables, ident parsing etc. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-22t2300: "git --exec-path" is not usable in $PATH on Windows as-isLibravatar Johannes Schindelin1-1/+9
The "git" command prepends the exec-path to the PATH environment variable for processes it spawns. That is how ". git-sh-setup" in our scripted Porcelains can find the dot-sourced file in the exec-path location that is not usually on user's PATH. When t2300 runs, because it is not spawned by the "git" command, the scriptlet being tested did not run with a realistic setting of PATH environment. It lacked the exec-path on the PATH, and failed to find the dot-sourced file. A recent update to t2300 attempted to fix this, with "PATH=$(git --exec-path):$PATH", which has been the recommended way around v1.6.0 days (a script whose original was written before that release that survives to this day is likely to have such a line). However, the "git --exec-path" command outputs C:\path\to\exec\dir (not /c/path/to/exec/dir) on Windows; the recent update failed to consider the problem that comes from it. Even though Git itself, when doing the equivalent internally, does so in a platform native way (i.e. on Windows, C:\path\to\exec\dir is prepended to the existing value of %PATH% using ';' as a component separator), the result is further massaged by bash and gets turned into $PATH that uses /c/path/to/exec/dir with ':' separating the components, which is the form understood by bash, so scripted Porcelains find commands from PATH correctly. An end user script written in shell, however, cannot prepend "C:\path\to\exec\dir:" to the existing value of $PATH and expect bash to magically turn it into the form it understands. In other words, "PATH=$(git --exec-path):$PATH" does not work as an emulation of what "Git" internally does to the PATH on Windows. To correctly emulate how exec-path is prepended to the PATH environment internally on Windows, we'd need to convert C:\git-sdk-64\usr\src\git to at least /c\git-sdk-64\usr\src\git ourselves before prepending it to PATH. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-01t2300: run git-sh-setup in an environment that better mimics the real lifeLibravatar Junio C Hamano1-1/+2
When we run scripted Porcelains, "git" potty has set up the $PATH by prepending $GIT_EXEC_PATH, the path given by "git --exec-path=$there $cmd", etc. already. Because of this, scripted Porcelains can dot-source shell script library like git-sh-setup with simple dot without specifying any path. t2300 however dot-sources git-sh-setup without adjusting $PATH like the real "git" potty does. This has not been a problem so far, but once git-sh-setup wants to rely on the $PATH adjustment, just like any scripted Porcelains already do, it would become one. It cannot for example dot-source another shell library without specifying the full path to it by prefixing $(git --exec-path). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-29t2300: use documented technique to invoke git-sh-setupLibravatar Matthew Ogilvie1-1/+1
This is needed to allow the test suite to run against a standard install bin directory instead of GIT_EXEC_PATH. Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-22Use prerequisite tags to skip tests that depend on symbolic linksLibravatar Johannes Sixt1-7/+7
Many tests depend on that symbolic links work. This introduces a check that sets the prerequisite tag SYMLINKS if the file system supports symbolic links. Since so many tests have to check for this prerequisite, we do the check in test-lib.sh, so that we don't need to repeat the test in many scripts. To check for 'ln -s' failures, you can use a FAT partition on Linux: $ mkdosfs -C git-on-fat 1000000 $ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt Clone git to /mnt and $ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7 t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \ make test (These additionally skipped tests depend on POSIX permissions that FAT on Linux does not provide.) Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-02-07git-sh-setup: Use "cd" option, not /bin/pwd, for symlinked work treeLibravatar Marcel M. Cary1-2/+2
In cd_to_toplevel, instead of 'cd $(unset PWD; /bin/pwd)/$path' use 'cd -P $path'. The "-P" option yields a desirable similarity to C chdir. While the "-P" option may be slightly less commonly supported than /bin/pwd, it is more concise, better tested, and less error prone. I've already added the 'unset PWD' to fix the /bin/pwd solution on BSD; there may be more edge cases out there. This still passes all the same test cases in t5521-pull-symlink.sh and t2300-cd-to-toplevel.sh, even before updating them to use 'pwd -P'. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-05git-sh-setup: Fix scripts whose PWD is a symlink to a work-dir on OS XLibravatar Marcel M. Cary1-2/+2
On Mac OS X and possibly BSDs, /bin/pwd reads PWD from the environment if available and shows the logical path by default rather than the physical one. Unset PWD before running /bin/pwd in both cd_to_toplevel and its test. Still use the external /bin/pwd because in my Bash on Linux, the builtin pwd prints the same result whether or not PWD is set. Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org> Tested-by: Wincent Colaiuta <win@wincent.com> (on Mac OS X 10.5.5) Tested-by: Marcel Koeppen <git-dev@marzelpan.de> (on Mac OS X 10.5.6) Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-21git-sh-setup: Fix scripts whose PWD is a symlink into a git work-dirLibravatar Marcel M. Cary1-0/+37
I want directories of my working tree to be linked to from various paths on my filesystem where third-party components expect them, both in development and production environments. A build system's install step could solve this, but I develop scripts and web pages that don't need to be built. Git's submodule system could solve this, but we tend to develop, branch, and test those directories all in unison, so one big repository feels more natural. We prefer to edit and commit on the symlinked paths, not the canonical ones, and in that setting, "git pull" fails to find the top-level directory of the repository while other commands work fine. "git pull" fails because POSIX shells have a notion of current working directory that is different from getcwd(). The shell stores this path in PWD. As a result, "cd ../" can be interpreted differently in a shell script than chdir("../") in a C program. The shell interprets "../" by essentially stripping the last textual path component from PWD, whereas C chdir() follows the ".." link in the current directory on the filesystem. When PWD is a symlink, these are different destinations. As a result, Git's C commands find the correct top-level working tree, and shell scripts do not. Changes: * When interpreting a relative upward (../) path in cd_to_toplevel, prepend the cwd without symlinks, given by /bin/pwd * Add tests for cd_to_toplevel and "git pull" in a symlinked directory that failed before this fix, plus contrasting scenarios that already worked Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>