| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Carefully excluding t2106, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t2*.sh &&
git checkout HEAD -- t2106\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The loop that fills in the buffers that are later passed to the merge
driver exits early when not all stages of a path are present in the index.
But since the buffer pointers are not initialized in advance, the
subsequent accesses are undefined.
Initialize buffer pointers in advance to avoid undefined behavior later.
That is not sufficient, though, to get correct operation of handle_cache().
The function replays a conflicted merge to extract the part inside the
conflict markers. As written, the loop exits early when a stage is missing.
Consequently, the buffers for later stages that would be present in the
index are not filled in and the merge is replayed with incomplete data.
Fix it by investigating all stages of the given path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'git rerere forget .' after a merge that involved binary files
runs into an infinite loop if the binary file contains a zero byte.
Replace a strchrnul by memchr because the former does not make progress
as soon as the NUL is encountered.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prefer:
test_line_count <OP> COUNT FILE
over:
test $(wc -l <FILE) <OP> COUNT
(or similar usages) in several tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It forgot to apply the prefix to the paths given on the command line.
[jc: added test]
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After you find out an earlier resolution you told rerere to use was a
mismerge, there is no easy way to clear it. A new subcommand "forget" can
be used to tell git to forget a recorded resolution, so that you can redo
the merge from scratch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The update-index plumbing command had a hacky --unresolve implementation
that was written back in the days when merge was the only way for users to
end up with higher stages in the index, and assumed that stage #2 must
have come from HEAD, stage #3 from MERGE_HEAD and didn't bother to compute
the stage #1 information.
There were several issues with this approach:
- These days, merge is not the only command, and conflicts coming from
commands like cherry-pick, "am -3", etc. cannot be recreated by looking
at MERGE_HEAD;
- For a conflict that came from a merge that had renames, picking up the
same path from MERGE_HEAD and HEAD wouldn't help recreating it, either;
- It may have been Ok not to recreate stage #1 back when it was written,
because "diff --ours/--theirs" were the only availble ways to review
conflicts and they don't need stage #1 information. "diff --cc" that
was invented much later is a lot more useful way but it needs stage #1.
We can use resolve-undo information recorded in the index extension to
solve all of these issues.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once you resolved conflicts by "git add path", you cannot recreate the
conflicted state with "git checkout -m path", because you lost information
from higher stages in the index when you resolved them.
Since we record the necessary information in the resolve-undo index
extension these days, we can reproduce the unmerged state in the index and
check it out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At the Porcelain level, operations such as merge that populate an
initially cleanly merged index with conflicted entries clear the
resolve-undo information upfront. Give scripted Porcelains a way
to do the same, by implementing "update-index --clear-resolve-info".
With this, a scripted Porcelain may "update-index --clear-resolve-info"
first and repeatedly run "update-index --cacheinfo" to stuff unmerged
entries to the index, to be resolved by the user with "git add" and
stuff.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure that resolving a failed merge with git add records
the conflicted state, committing the result keeps that state,
and checking out another commit clears the state.
"git ls-files" learns a new option --resolve-undo to show the
recorded information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Johannes Sixt
Stefano Lattarini
Junio C Hamano