summaryrefslogtreecommitdiff
path: root/t/t2025-worktree-add.sh
AgeCommit message (Collapse)AuthorFilesLines
2017-12-27Merge branch 'es/clone-shared-worktree'Libravatar Junio C Hamano1-0/+6
"git clone --shared" to borrow from a (secondary) worktree did not work, even though "git clone --local" did. Both are now accepted. * es/clone-shared-worktree: clone: support 'clone --shared' from a worktree
2017-12-27Merge branch 'es/worktree-checkout-hook'Libravatar Junio C Hamano1-0/+29
"git worktree add" learned to run the post-checkout hook, just like "git checkout" does, after the initial checkout. * es/worktree-checkout-hook: worktree: invoke post-checkout hook (unless --no-checkout)
2017-12-11clone: support 'clone --shared' from a worktreeLibravatar Eric Sunshine1-0/+6
When worktree functionality was originally implemented, the possibility of 'clone --local' from within a worktree was overlooked, with the result that the location of the "objects" directory of the source repository was computed incorrectly, thus the objects could not be copied or hard-linked by the clone. This shortcoming was addressed by 744e469755 (clone: allow --local from a linked checkout, 2015-09-28). However, the related case of 'clone --shared' (despite being handled only a few lines away from the 'clone --local' case) was not fixed by 744e469755, with a similar result of the "objects" directory location being incorrectly computed for insertion into the 'alternates' file. Fix this. Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-07worktree: invoke post-checkout hook (unless --no-checkout)Libravatar Eric Sunshine1-0/+29
git-clone and git-checkout both invoke the post-checkout hook following a successful checkout, yet git-worktree neglects to do so even though it too "checks out" the worktree. Fix this oversight. Implementation note: The newly-created worktree may reference a branch or be detached. In the latter case, a commit lookup is performed, though the result is used only in a boolean sense to (a) determine if the commit actually exists, and (b) assign either the branch name or commit ID to HEAD. Since the post-commit hook needs to know the ID of the checked-out commit, the lookup now needs to be done in all cases, rather than only when detached. Consequently, a new boolean is needed to handle (b) since the lookup result itself can no longer perform that role. Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-06add worktree.guessRemote config optionLibravatar Thomas Gummerer1-0/+31
Some users might want to have the --guess-remote option introduced in the previous commit on by default, so they don't have to type it out every time they create a new worktree. Add a config option worktree.guessRemote that allows users to configure the default behaviour for themselves. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-06worktree: add --guess-remote flag to add subcommandLibravatar Thomas Gummerer1-0/+29
Currently 'git worktree add <path>' creates a new branch named after the basename of the <path>, that matches the HEAD of whichever worktree we were on when calling "git worktree add <path>". It's sometimes useful to have 'git worktree add <path> behave more like the dwim machinery in 'git checkout <new-branch>', i.e. check if the new branch name, derived from the basename of the <path>, uniquely matches the branch name of a remote-tracking branch, and if so check out that branch and set the upstream to the remote-tracking branch. Add a new --guess-remote option that enables exactly that behaviour. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-27worktree: make add <path> <branch> dwimLibravatar Thomas Gummerer1-0/+19
Currently 'git worktree add <path> <branch>', errors out when 'branch' is not a local branch. It has no additional dwim'ing features that one might expect. Make it behave more like 'git checkout <branch>' when the branch doesn't exist locally, but a remote tracking branch uniquely matches the desired branch name, i.e. create a new branch from the remote tracking branch and set the upstream to the remote tracking branch. As 'git worktree add' currently just dies in this situation, there are no backwards compatibility worries when introducing this feature. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-27worktree: add --[no-]track option to the add subcommandLibravatar Thomas Gummerer1-0/+51
Currently 'git worktree add' sets up tracking branches if '<branch>' is a remote tracking branch, and doesn't set them up otherwise, as is the default for 'git branch'. This may or may not be what the user wants. Allow overriding this behaviour with a --[no-]track flag that gets passed through to 'git branch'. We already respect branch.autoSetupMerge, as 'git worktree' just calls 'git branch' internally. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-20worktree add: add --lock optionLibravatar Nguyễn Thái Ngọc Duy1-0/+6
As explained in the document. This option has an advantage over the command sequence "git worktree add && git worktree lock": there will be no gap that somebody can accidentally "prune" the new worktree (or soon, explicitly "worktree remove" it). "worktree add" does keep a lock on while it's preparing the worktree. If --lock is specified, this lock remains after the worktree is created. Suggested-by: David Taylor <David.Taylor@dell.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-14worktree: allow the main brach of a bare repository to be checked outLibravatar Dennis Kaarsemaker1-0/+8
In bare repositories, get_worktrees() still returns the main repository, so git worktree list can show it. ignore it in find_shared_symref so we can still check out the main branch. Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-31worktree: allow "-" short-hand for @{-1} in add commandLibravatar Jordan DE GEA1-0/+16
Since `git worktree add` uses `git checkout` when `[<branch>]` is used, and `git checkout -` is already supported, it makes sense to allow the same shortcut in `git worktree add`. Signed-off-by: Jordan DE GEA <jordan.de-gea@grenoble-inp.org> Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22branch: do not rename a branch under bisect or rebaseLibravatar Nguyễn Thái Ngọc Duy1-0/+8
The branch name in that case could be saved in rebase's head_name or bisect's BISECT_START files. Ideally we should try to update them as well. But it's trickier (*). Let's play safe and see if the user complains about inconveniences before doing that. (*) If we do it, bisect and rebase need to provide an API to rename branches. We can't do it in worktree.c or builtin/branch.c because when other people change rebase/bisect code, they may not be aware of this code and accidentally break it (e.g. rename the branch file, or refer to the branch in new files). It's a lot more work. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22worktree.c: check whether branch is bisected in another worktreeLibravatar Nguyễn Thái Ngọc Duy1-0/+13
Similar to the rebase case, we want to detect if "HEAD" in some worktree is being bisected because 1) we do not want to checkout this branch in another worktree, after bisect is done it will want to go back to this branch 2) we do not want to delete the branch is either or git bisect will fail to return to the (long gone) branch Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-22worktree.c: check whether branch is rebased in another worktreeLibravatar Nguyễn Thái Ngọc Duy1-0/+38
This function find_shared_symref() is used in a couple places: 1) in builtin/branch.c: it's used to detect if a branch is checked out elsewhere and refuse to delete the branch. 2) in builtin/notes.c: it's used to detect if a note is being merged in another worktree 3) in branch.c, the function die_if_checked_out() is actually used by "git checkout" and "git worktree add" to see if a branch is already checked out elsewhere and refuse the operation. In cases 1 and 3, if a rebase is ongoing, "HEAD" will be in detached mode, find_shared_symref() fails to detect it and declares "no branch is checked out here", which is not really what we want. This patch tightens the test. If the given symref is "HEAD", we try to detect if rebase is ongoing. If so return the branch being rebased. This makes checkout and branch delete operations safer because you can't checkout a branch being rebased in another place, or delete it. Special case for checkout. If the current branch is being rebased, git-rebase.sh may use "git checkout" to abort and return back to the original branch. The updated test in find_shared_symref() will prevent that and "git rebase --abort" will fail as a result. find_shared_symref() and die_if_checked_out() have to learn a new option ignore_current_worktree to loosen the test a bit. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-29worktree: add: introduce --checkout optionLibravatar Ray Zhang1-0/+12
By adding this option which defaults to true, we can use the corresponding --no-checkout to make some customizations before the checkout, like sparse checkout, etc. Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Ray Zhang <zhanglei002@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-15worktree add -B: do the checkout test before update branchLibravatar Nguyễn Thái Ngọc Duy1-0/+7
If --force is not given but -B is, we should not proceed if the given branch is already checked out elsewhere. add_worktree() has this test, but it kicks in too late when "git branch --force" is already executed. As a result, even though we correctly refuse to create a new worktree, we have already updated the branch and mess up the other checkout. Repeat the die_if_checked_out() test again for this specific case before "git branch" runs. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-15worktree: fix "add -B"Libravatar Nguyễn Thái Ngọc Duy1-0/+8
Current code does not update "symref" when -B is used. This string contains the new HEAD. Because it's empty "git worktree add -B" fails at symbolic-ref step. Because branch creation is already done before calling add_worktree(), -B is equivalent to -b from add_worktree() point of view. We do not need the special case for -B. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-27t/t2025-worktree-add.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-2/+2
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}" done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-28clone: allow --local from a linked checkoutLibravatar Nguyễn Thái Ngọc Duy1-0/+5
Noticed-by: Bjørnar Snoksrud <snoksrud@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20worktree: add: suppress auto-vivication with --detach and no <branch>Libravatar Eric Sunshine1-0/+14
Fix oversight where branch auto-vivication incorrectly kicks in when --detach is specified and <branch> omitted. Instead, treat: git worktree add --detach <path> as shorthand for: git worktree add --detach <path> HEAD Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20worktree: make --detach mutually exclusive with -b/-BLibravatar Eric Sunshine1-0/+12
Be consistent with git-checkout which disallows this (not particularly meaningful) combination. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-20checkout: teach check_linked_checkout() about symbolic link HEADLibravatar Eric Sunshine1-0/+8
check_linked_checkout() only understands symref-style HEAD (i.e. "ref: refs/heads/master"), however, HEAD may also be a an actual symbolic link (on platforms which support it). To accurately detect if a branch is checked out elsewhere, it needs to handle symbolic link HEAD, as well. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-07worktree: add: auto-vivify new branch when <branch> is omittedLibravatar Eric Sunshine1-0/+14
As a convenience, when <branch> is omitted from "git worktree <path> <branch>" and neither -b nor -B is used, automatically create a new branch named after <path>, as if "-b $(basename <path>)" was specified. Thus, "git worktree add ../hotfix" creates a new branch named "hotfix" and associates it with new worktree "../hotfix". Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-06worktree: add: make -b/-B default to HEAD when <branch> is omittedLibravatar Eric Sunshine1-0/+5
As a convenience, like "git branch" and "git checkout -b", make "git worktree add -b <newbranch> <path> <branch>" default to HEAD when <branch> is omitted. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-06tests: worktree: retrofit "checkout --to" tests for "worktree add"Libravatar Eric Sunshine1-0/+143
With the introduction of "git worktree add", "git checkout --to" is slated for removal. Therefore, retrofit linked worktree creation tests to use "git worktree add" instead. (The test to check exclusivity of "checkout --to" and "checkout <paths>" is dropped altogether since it becomes meaningless with retirement of "checkout --to".) Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>