summaryrefslogtreecommitdiff
path: root/t/t2024-checkout-dwim.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-11-19t2*: adjust the references to the default branch name "main"Libravatar Johannes Schindelin1-35/+35
Carefully excluding t2106, which sees independent development elsewhere at the time of writing, we transition above-mentioned tests to the default branch name `main`. This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -- t2*.sh && git checkout HEAD -- t2106\*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-08checkout: learn to respect checkout.guessLibravatar Denton Liu1-0/+11
The current behavior of git checkout/switch is that --guess is currently enabled by default. However, some users may not wish for this to happen automatically. Instead of forcing users to specify --no-guess manually each time, teach these commands the checkout.guess configuration variable that gives users the option to set a default behavior. Teach the completion script to recognize the new config variable and disable DWIM logic if it is set to false. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-07checkout: don't revert file on ambiguous tracking branchesLibravatar Alexandr Miloslavskiy1-2/+26
For easier understanding, here are the existing good scenarios: 1) Have *no* file 'foo', *no* local branch 'foo' and a *single* remote branch 'foo' 2) `git checkout foo` will create local branch foo, see [1] and 1) Have *a* file 'foo', *no* local branch 'foo' and a *single* remote branch 'foo' 2) `git checkout foo` will complain, see [3] This patch prevents the following scenario: 1) Have *a* file 'foo', *no* local branch 'foo' and *multiple* remote branches 'foo' 2) `git checkout foo` will successfully... revert contents of file `foo`! That is, adding another remote suddenly changes behavior significantly, which is a surprise at best and could go unnoticed by user at worst. Please see [3] which gives some real world complaints. To my understanding, fix in [3] overlooked the case of multiple remotes, and the whole behavior of falling back to reverting file was never intended: [1] introduces the unexpected behavior. Before, there was fallback from not-a-ref to pathspec. This is reasonable fallback. After, there is another fallback from ambiguous-remote to pathspec. I understand that it was a copy&paste oversight. [2] noticed the unexpected behavior but chose to semi-document it instead of forbidding, because the goal of the patch series was focused on something else. [3] adds `die()` when there is ambiguity between branch and file. The case of multiple tracking branches is seemingly overlooked. The new behavior: if there is no local branch and multiple remote candidates, just die() and don't try reverting file whether it exists (prevents surprise) or not (improves error message). [1] Commit 70c9ac2f ("DWIM "git checkout frotz" to "git checkout -b frotz origin/frotz"" 2009-10-18) https://public-inbox.org/git/7vaazpxha4.fsf_-_@alter.siamese.dyndns.org/ [2] Commit ad8d5104 ("checkout: add advice for ambiguous "checkout <branch>"", 2018-06-05) https://public-inbox.org/git/20180502105452.17583-1-avarab@gmail.com/ [3] Commit be4908f1 ("checkout: disambiguate dwim tracking branches and local files", 2018-11-13) https://public-inbox.org/git/20181110120707.25846-1-pclouds@gmail.com/ Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-14checkout: disambiguate dwim tracking branches and local filesLibravatar Nguyễn Thái Ngọc Duy1-0/+31
When checkout dwim is added in [1], it is restricted to only dwim when certain conditions are met and fall back to default checkout behavior otherwise. It turns out falling back could be confusing. One of the conditions to turn git checkout frotz to git checkout -b frotz origin/frotz is that frotz must not exist as a file. But when the user comes to expect "git checkout frotz" to create the branch "frotz" and there happens to be a file named "frotz", git's silently reverting "frotz" file content is not helping. This is reported in Git mailing list [2] and even used as an example of "Git is bad" elsewhere [3]. We normally try to do the right thing, but when there are multiple "right things" to do, it's best to leave it to the user to decide. Check this case, ask the user to to disambiguate: - "git checkout -- foo" will check out path "foo" - "git checkout foo --" will dwim and create branch "foo" [4] For users who do not want dwim, use --no-guess. It's useless in this particular case because "git checkout --no-guess foo --" will just fail. But it could be used by scripts. [1] 70c9ac2f19 (DWIM "git checkout frotz" to "git checkout -b frotz origin/frotz" - 2009-10-18) [2] https://public-inbox.org/git/CACsJy8B2TVr1g+k+eSQ=pBEO3WN4_LtgLo9gpur8X7Z9GOFL_A@mail.gmail.com/ [3] https://news.ycombinator.com/item?id=18230655 [4] a047fafc78 (checkout: allow dwim for branch creation for "git checkout $branch --" - 2013-10-18) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-20Merge branch 'ab/checkout-default-remote'Libravatar Junio C Hamano1-2/+7
* ab/checkout-default-remote: t2024: mark test using "checkout -p" with PERL prerequisite
2018-08-18t2024: mark test using "checkout -p" with PERL prerequisiteLibravatar Ævar Arnfjörð Bjarmason1-2/+7
Checkout with the -p switch uses the "add interactive" framework which is written in Perl. One test added in 8d7b558bae ("checkout & worktree: introduce checkout.defaultRemote", 2018-06-05) didn't declare the PERL prerequisite, breaking the test when built with NO_PERL. Reported-by: CB Bailey <cb@hashpling.org> Signed-off-by: CB Bailey <cb@hashpling.org> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30tests: make use of the test_must_be_empty functionLibravatar Ævar Arnfjörð Bjarmason1-2/+1
Change various tests that use an idiom of the form: >expect && test_cmp expect actual To instead use: test_must_be_empty actual The test_must_be_empty() wrapper was introduced in ca8d148daf ("test: test_must_be_empty helper", 2013-06-09). Many of these tests have been added after that time. This was mostly found with, and manually pruned from: git grep '^\s+>.*expect.* &&$' t Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-11checkout & worktree: introduce checkout.defaultRemoteLibravatar Ævar Arnfjörð Bjarmason1-1/+17
Introduce a checkout.defaultRemote setting which can be used to designate a remote to prefer (via checkout.defaultRemote=origin) when running e.g. "git checkout master" to mean origin/master, even though there's other remotes that have the "master" branch. I want this because it's very handy to use this workflow to checkout a repository and create a topic branch, then get back to a "master" as retrieved from upstream: ( cd /tmp && rm -rf tbdiff && git clone git@github.com:trast/tbdiff.git && cd tbdiff && git branch -m topic && git checkout master ) That will output: Branch 'master' set up to track remote branch 'master' from 'origin'. Switched to a new branch 'master' But as soon as a new remote is added (e.g. just to inspect something from someone else) the DWIMery goes away: ( cd /tmp && rm -rf tbdiff && git clone git@github.com:trast/tbdiff.git && cd tbdiff && git branch -m topic && git remote add avar git@github.com:avar/tbdiff.git && git fetch avar && git checkout master ) Will output (without the advice output added earlier in this series): error: pathspec 'master' did not match any file(s) known to git. The new checkout.defaultRemote config allows me to say that whenever that ambiguity comes up I'd like to prefer "origin", and it'll still work as though the only remote I had was "origin". Also adjust the advice.checkoutAmbiguousRemoteBranchName message to mention this new config setting to the user, the full output on my git.git is now (the last paragraph is new): $ ./git --exec-path=$PWD checkout master error: pathspec 'master' did not match any file(s) known to git. hint: 'master' matched more than one remote tracking branch. hint: We found 26 remotes with a reference that matched. So we fell back hint: on trying to resolve the argument as a path, but failed there too! hint: hint: If you meant to check out a remote tracking branch on, e.g. 'origin', hint: you can do so by fully qualifying the name with the --track option: hint: hint: git checkout --track origin/<name> hint: hint: If you'd like to always have checkouts of an ambiguous <name> prefer hint: one remote, e.g. the 'origin' remote, consider setting hint: checkout.defaultRemote=origin in your config. I considered splitting this into checkout.defaultRemote and worktree.defaultRemote, but it's probably less confusing to break our own rules that anything shared between config should live in core.* than have two config settings, and I couldn't come up with a short name under core.* that made sense (core.defaultRemoteForCheckout?). See also 70c9ac2f19 ("DWIM "git checkout frotz" to "git checkout -b frotz origin/frotz"", 2009-10-18) which introduced this DWIM feature to begin with, and 4e85333197 ("worktree: make add <path> <branch> dwim", 2017-11-26) which added it to git-worktree. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-11checkout: add advice for ambiguous "checkout <branch>"Libravatar Ævar Arnfjörð Bjarmason1-0/+14
As the "checkout" documentation describes: If <branch> is not found but there does exist a tracking branch in exactly one remote (call it <remote>) with a matching name, treat as equivalent to [...] <remote>/<branch. This is a really useful feature. The problem is that when you add another remote (e.g. a fork), git won't find a unique branch name anymore, and will instead print this unhelpful message: $ git checkout master error: pathspec 'master' did not match any file(s) known to git Now it will, on my git.git checkout, print: $ ./git --exec-path=$PWD checkout master error: pathspec 'master' did not match any file(s) known to git. hint: 'master' matched more than one remote tracking branch. hint: We found 26 remotes with a reference that matched. So we fell back hint: on trying to resolve the argument as a path, but failed there too! hint: hint: If you meant to check out a remote tracking branch on, e.g. 'origin', hint: you can do so by fully qualifying the name with the --track option: hint: hint: git checkout --track origin/<name> Note that the "error: pathspec[...]" message is still printed. This is because whatever else checkout may have tried earlier, its final fallback is to try to resolve the argument as a path. E.g. in this case: $ ./git --exec-path=$PWD checkout master pu error: pathspec 'master' did not match any file(s) known to git. error: pathspec 'pu' did not match any file(s) known to git. There we don't print the "hint:" implicitly due to earlier logic around the DWIM fallback. That fallback is only used if it looks like we have one argument that might be a branch. I can't think of an intrinsic reason for why we couldn't in some future change skip printing the "error: pathspec[...]" error. However, to do so we'd need to pass something down to checkout_paths() to make it suppress printing an error on its own, and for us to be confident that we're not silencing cases where those errors are meaningful. I don't think that's worth it since determining whether that's the case could easily change due to future changes in the checkout logic. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-11checkout tests: index should be clean after dwim checkoutLibravatar Ævar Arnfjörð Bjarmason1-0/+29
Assert that whenever there's a DWIM checkout that the index should be clean afterwards, in addition to the correct branch being checked-out. The way the DWIM checkout code in checkout.[ch] works is by looping over all remotes, and for each remote trying to find if a given reference name only exists on that remote, or if it exists anywhere else. This is done by starting out with a `unique = 1` tracking variable in a struct shared by the entire loop, which will get set to `0` if the data reference is not unique. Thus if we find a match we know the dst_oid member of tracking_name_data must be correct, since it's associated with the only reference on the only remote that could have matched our query. But if there was ever a mismatch there for some reason we might end up with the correct branch checked out, but at the wrong oid, which would show whatever the difference between the two staged in the index (checkout branch A, stage changes from the state of branch B). So let's amend the tests (mostly added in) 399e4a1c56 ("t2024: Add tests verifying current DWIM behavior of 'git checkout <branch>'", 2013-04-21) to always assert that "status" is clean after we run "checkout", that's being done with "-uno" because there's going to be some untracked files related to the test itself which we don't care about. In all these tests (DWIM or otherwise) we start with a clean index, so these tests are asserting that that's still the case after the "checkout", failed or otherwise. Then if we ever run into this sort of regression, either in the existing code or with a new feature, we'll know. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-21checkout: fix ambiguity check in subdirLibravatar Nguyễn Thái Ngọc Duy1-0/+12
The two functions in parse_branchname_arg(), verify_non_filename and check_filename, need correct prefix in order to reconstruct the paths and check for their existence. With NULL prefix, they just check paths at top dir instead. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-14checkout: report upstream correctly even with loosely defined branch.*.mergeLibravatar Junio C Hamano1-0/+18
When checking out a branch that is set to build on top of another branch (often, a remote-tracking branch), "git checkout" reports how your work relates to the other branch, e.g. Your branch is behind 'origin/master', and can be fast-forwarded. Back when this feature was introduced, this was only done for branches that build on remote-tracking branches, but 5e6e2b48 (Make local branches behave like remote branches when --tracked, 2009-04-01) added support to give the same report for branches that build on other local branches (i.e. branches whose branch.*.remote variables are set to '.'). Unlike the support for the branches building on remote-tracking branches, however, this did not take into account the fact that branch.*.merge configuration is allowed to record a shortened branch name. When branch.*.merge is set to 'master' (not 'refs/heads/master'), i.e. "my branch builds on the local 'master' branch", this caused "git checkout" to report: Your branch is based on 'master', but the upstream is gone. The upstream is our repository and is definitely not gone, so this output is nonsense. The fix is fairly obvious; just like the branch name is DWIMed when "git pull" merges from the 'master' branch without complaint on such a branch, the name of the branch the current branch builds upon needs to be DWIMed the same way. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-30Merge branch 'mm/checkout-auto-track-fix'Libravatar Junio C Hamano1-0/+21
"git checkout topic", when there is not yet a local "topic" branch but there is a unique remote-tracking branch for a remote "topic" branch, pretended as if "git checkout -t -b topic remote/$r/topic" (for that unique remote $r) was run. This hack however was not implemented for "git checkout topic --". * mm/checkout-auto-track-fix: checkout: proper error message on 'git checkout foo bar --' checkout: allow dwim for branch creation for "git checkout $branch --"
2013-10-18checkout: allow dwim for branch creation for "git checkout $branch --"Libravatar Matthieu Moy1-0/+21
The "--" notation disambiguates files and branches, but as a side-effect of the previous implementation, also disabled the branch auto-creation when $branch does not exist. A possible scenario is then: git checkout $branch => fails if $branch is both a ref and a file, and suggests -- git checkout $branch -- => refuses to create the $branch This patch allows the second form to create $branch, and since the -- is provided, it does not look for file named $branch. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-09t2024: Fix &&-chaining and a couple of typosLibravatar Johan Herland1-3/+3
Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-21branch.c: Validate tracking branches with refspecs instead of refs/remotes/*Libravatar Johan Herland1-1/+1
The current code for validating tracking branches (e.g. the argument to the -t/--track option) hardcodes refs/heads/* and refs/remotes/* as the potential locations for tracking branches. This works with the refspecs created by "git clone" or "git remote add", but is suboptimal in other cases: - If "refs/remotes/foo/bar" exists without any association to a remote (i.e. there is no remote named "foo", or no remote with a refspec that matches "refs/remotes/foo/bar"), then it is impossible to set up a valid upstream config that tracks it. Currently, the code defaults to using "refs/remotes/foo/bar" from repo "." as the upstream, which works, but is probably not what the user had in mind when running "git branch baz --track foo/bar". - If the user has tweaked the fetch refspec for a remote to put its remote-tracking branches outside of refs/remotes/*, e.g. by running git config remote.foo.fetch "+refs/heads/*:refs/foo_stuff/*" then the current code will refuse to use its remote-tracking branches as --track arguments, since they do not match refs/remotes/*. This patch removes the "refs/remotes/*" requirement for upstream branches, and replaces it with explicit checking of the refspecs for each remote to determine whether a given --track argument is a valid remote-tracking branch. This solves both of the above problems, since the matching refspec guarantees that there is a both a remote name and a remote branch name that can be used for the upstream config. However, this means that refs located within refs/remotes/* without a corresponding remote/refspec will no longer be usable as upstreams. The few existing tests which depended on this behavioral quirk has already been fixed in the preceding patches. This patch fixes the last remaining test failure in t2024-checkout-dwim. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-21checkout: Use remote refspecs when DWIMming tracking branchesLibravatar Johan Herland1-3/+3
The DWIM mode of checkout allows you to run "git checkout foo" when there is no existing local ref or path called "foo", and there is exactly _one_ remote with a remote-tracking branch called "foo". Git will automatically create a new local branch called "foo" using the remote-tracking "foo" as its starting point and configured upstream. For example, consider the following unconventional (but perfectly valid) remote setup: [remote "origin"] fetch = refs/heads/*:refs/remotes/origin/* [remote "frotz"] fetch = refs/heads/*:refs/remotes/frotz/nitfol/* Case 1: Assume both "origin" and "frotz" have remote-tracking branches called "foo", at "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo" respectively. In this case "git checkout foo" should fail, because there is more than one remote with a "foo" branch. Case 2: Assume only "frotz" have a remote-tracking branch called "foo". In this case "git checkout foo" should succeed, and create a local branch "foo" from "refs/remotes/frotz/nitfol/foo", using remote branch "foo" from "frotz" as its upstream. The current code hardcodes the assumption that all remote-tracking branches must match the "refs/remotes/$remote/*" pattern (which is true for remotes with "conventional" refspecs, but not true for the "frotz" remote above). When running "git checkout foo", the current code looks for exactly one ref matching "refs/remotes/*/foo", hence in the above example, it fails to find "refs/remotes/frotz/nitfol/foo", which causes it to fail both case #1 and #2. The better way to handle the above example is to actually study the fetch refspecs to deduce the candidate remote-tracking branches for "foo"; i.e. assume "foo" is a remote branch being fetched, and then map "refs/heads/foo" through the refspecs in order to get the corresponding remote-tracking branches "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo". Finally we check which of these happens to exist in the local repo, and if there is exactly one, we have an unambiguous match for "git checkout foo", and may proceed. This fixes most of the failing tests introduced in the previous patch. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-21t2024: Show failure to use refspec when DWIMming remote branch namesLibravatar Johan Herland1-1/+69
When using "git checkout foo" to DWIM the creation of local "foo" from some existing upstream "foo", we assume conventional refspecs as created by "git clone" or "git remote add", and fail to work correctly if the current refspecs do not follow the conventional "refs/remotes/$remote/*" pattern. Improved-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-21t2024: Add tests verifying current DWIM behavior of 'git checkout <branch>'Libravatar Johan Herland1-0/+99
The DWIM mode of checkout allows you to run "git checkout foo" when there is no existing local ref or path called "foo", and there is exactly one remote with a remote-tracking branch called "foo". Git will then automatically create a new local branch called "foo" using the remote-tracking "foo" as its starting point and configured upstream. Improved-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>