summaryrefslogtreecommitdiff
path: root/t/t1514-rev-parse-push.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-11-19t[01]*: adjust the references to the default branch name "main"Libravatar Johannes Schindelin1-9/+9
Carefully excluding t1309, which sees independent development elsewhere at the time of writing, we transition above-mentioned tests to the default branch name `main`. This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh && git checkout HEAD -- t1309\*) Note that t5533 contains a variation of the name `master` (`naster`) that we rename here, too. This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19tests: mark tests relying on the current default for `init.defaultBranch`Libravatar Johannes Schindelin1-0/+3
In addition to the manual adjustment to let the `linux-gcc` CI job run the test suite with `master` and then with `main`, this patch makes sure that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts that currently rely on the initial branch name being `master by default. To determine which test scripts to mark up, the first step was to force-set the default branch name to `master` in - all test scripts that contain the keyword `master`, - t4211, which expects `t/t4211/history.export` with a hard-coded ref to initialize the default branch, - t5560 because it sources `t/t556x_common` which uses `master`, - t8002 and t8012 because both source `t/annotate-tests.sh` which also uses `master`) This trick was performed by this command: $ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' $(git grep -l master t/t[0-9]*.sh) \ t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh After that, careful, manual inspection revealed that some of the test scripts containing the needle `master` do not actually rely on a specific default branch name: either they mention `master` only in a comment, or they initialize that branch specificially, or they do not actually refer to the current default branch. Therefore, the aforementioned modification was undone in those test scripts thusly: $ git checkout HEAD -- \ t/t0027-auto-crlf.sh t/t0060-path-utils.sh \ t/t1011-read-tree-sparse-checkout.sh \ t/t1305-config-include.sh t/t1309-early-config.sh \ t/t1402-check-ref-format.sh t/t1450-fsck.sh \ t/t2024-checkout-dwim.sh \ t/t2106-update-index-assume-unchanged.sh \ t/t3040-subprojects-basic.sh t/t3301-notes.sh \ t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \ t/t3436-rebase-more-options.sh \ t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \ t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \ t/t5511-refspec.sh t/t5526-fetch-submodules.sh \ t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \ t/t5548-push-porcelain.sh \ t/t5552-skipping-fetch-negotiator.sh \ t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \ t/t5614-clone-submodules-shallow.sh \ t/t7508-status.sh t/t7606-merge-custom.sh \ t/t9302-fast-import-unpack-limit.sh We excluded one set of test scripts in these commands, though: the range of `git p4` tests. The reason? `git p4` stores the (foreign) remote branch in the branch called `p4/master`, which is obviously not the default branch. Manual analysis revealed that only five of these tests actually require a specific default branch name to pass; They were modified thusly: $ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' t/t980[0167]*.sh t/t9811*.sh Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-27rev-parse: match @{upstream}, @{u} and @{push} case-insensitivelyLibravatar Ævar Arnfjörð Bjarmason1-2/+6
Change the revision parsing logic to match @{upstream}, @{u} & @{push} case-insensitively. Before this change supplying anything except the lower-case forms emits an "unknown revision or path not in the working tree" error. This change makes upper-case & mixed-case versions equivalent to the lower-case versions. The use-case for this is being able to hold the shift key down while typing @{u} on certain keyboard layouts, which makes the sequence easier to type, and reduces cases where git throws an error at the user where it could do what he means instead. These suffixes now join various other suffixes & special syntax documented in gitrevisions(7) that matches case-insensitively. A table showing the status of the various forms documented there before & after this patch is shown below. The key for the table is: - CI = Case Insensitive - CIP = Case Insensitive Possible (without ambiguities) - AG = Accepts Garbage (.e.g. @{./.4.minutes./.}) Before this change: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | N | Y | N | | @{push} | N | Y | N | |----------------+-----+------+-----| After it: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | Y | Y | N | | @{push} | Y | Y | N | |----------------+-----+------+-----| The ^{<type>} suffix is not made case-insensitive, because other places that take <type> like "cat-file -t <type>" do want them case sensitively (after all we never declared that type names are case insensitive). Allowing case-insensitive typename only with this syntax will make the resulting Git as a whole inconsistent. This change was independently authored to scratch a longtime itch, but when I was about to submit it I discovered that a similar patch had been submitted unsuccessfully before by Conrad Irwin in August 2011 as "rev-parse: Allow @{U} as a synonym for @{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>). The tests for this patch are more exhaustive than in the 2011 submission. The starting point for them was to first change the code to only support upper-case versions of the existing words, seeing what broke, and amending the breaking tests to check upper case & mixed case as appropriate, and where not redundant to other similar tests. The implementation itself is equivalent. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-07branch_get_push: do not segfault when HEAD is detachedLibravatar Kyle Meyer1-0/+6
Move the detached HEAD check from branch_get_push_1() to branch_get_push() to avoid setting branch->push_tracking_ref when branch is NULL. Signed-off-by: Kyle Meyer <kyle@kyleam.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-22sha1_name: implement @{push} shorthandLibravatar Jeff King1-0/+63
In a triangular workflow, each branch may have two distinct points of interest: the @{upstream} that you normally pull from, and the destination that you normally push to. There isn't a shorthand for the latter, but it's useful to have. For instance, you may want to know which commits you haven't pushed yet: git log @{push}.. Or as a more complicated example, imagine that you normally pull changes from origin/master (which you set as your @{upstream}), and push changes to your own personal fork (e.g., as myfork/topic). You may push to your fork from multiple machines, requiring you to integrate the changes from the push destination, rather than upstream. With this patch, you can just do: git rebase @{push} rather than typing out the full name. The heavy lifting is all done by branch_get_push; here we just wire it up to the "@{push}" syntax. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>